Prof. Dr. Jürgen Eckert

 
Department:Institute for Complex Materials (IKM)
Address:IFW Dresden
Helmholtzstraße 20
01069 Dresden
Telephone number:+49-351-4659-602
E-mail:J.Eckert(at)ifw-dresden.de



Journal papers:924
Contributions to collected editions/proceedings:127
Invited talks:238

Journal papers

2017

A. Helth, S. Pilz, T. Kirsten, L. Giebeler, J. Freudenberger, M. Calin, J. Eckert, A. Gebert: Effect ofthermomechanicalprocessing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy, Journal of the Mechanical Behavior of Biomedical Materials 65 (2017), S. 137-150 URL

2016

S. Abdi, M. Boenisch, S. Oswald, M.S. Khoshkhoo, W. Gruner, M. Lorenzetti, U. Wolff, M. Calin, J. Eckert, A. Gebert: Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys, Journal of Materials Research 31 (2016) Nr. 9, S. 1264-1274 URL

S. Abdi, S. Oswald, P.F. Gostin, A. Helth, J. Sort, M.D. Baro, M. Calin, L. Schultz, J. Eckert, A. Gebert: Designing new biocompatible glass-forming Ti75-xZr10NbxSi15 (x=0, 15) alloys: corrosion, passivity, and apatite formation, Journal of Biomedical Materials Research Part B: Applied Biomaterials 104 (2016) Nr. 1, S. 27-38 URL

J. Balach, T. Jaumann, S. Muehlenhoff, J. Eckert, L. Giebeler: Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries, Chemical Communications (2016) Nr. 52, S. 8134-8137 URL

J. Balach, T. Jaumann, M. Klose, S. Oswald, J. Eckert, L. Giebeler: Improved cycling stability of lithiumesulfur batteries using a polypropylene-supported nitrogen-doped mesoporous carbon hybrid separator as polysulfide adsorbent, Journal of Power Sources 303 (2016), S. 317-324 URL

X.L. Bian, G. Wang, H.C. Chen, L. Yan, J.G. Wang, Q. Wang, P.F. Hu, J.L. Ren, K.C. Chan, N. Zheng, A. Teresiak, Y.L. Gao, Q.J. Zhai, J. Eckert, J. Beadsworth, K.A. Dahmen, P.K. Liaw: Manipulation of free volumes in a metallic glass through Xe-ion irradiation, Acta Materialia 106 (2016), S. 66-77 URL

M. Boenisch, T. Waitz, M. Calin, W. Skrotzki, J. Eckert: Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content, International Journal of Plasticity 85 (2016), S. 190-202 URL

A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, J. Eckert: Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles, Journal of Materials Research 31 (2016) Nr. 9, S. 1229-1236 URL

B. Escher, U. Kuehn, J. Eckert, C. Rentenberger, S. Pauly: Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses, Materials Science and Engineering A 673 (2016), S. 90-98 URL

P. Gargarella, S. Pauly, M.S. Khoshkhoo, C.S. Kiminami, U. Kuehn, J. Eckert: Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si, Journal of Alloys and Compounds 663 (2016), S. 531-539 URL

I.G. Gonzalez-Martinez, T. Gemming, R. Mendes, A. Bachmatiuk, V. Bezugly, J. Kunstmann, J. Eckert, G. Cuniberti, M.H. Ruemmeli: In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation Of Crystalline Aluminum Borate Nanowires, Scientific Reports 6 (2016), S. 22524/1-9 URL

T. Gustmann, A. Neves, U. Kuehn, P. Gargarella, C.S. Kiminami, C. Bolfarini, J. Eckert, S. Pauly: Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting, Additive Manufacturing 11 (2016), S. 23-31 URL

J. He, I. Kaban, N. Mattern, K. Song, B. Sun, J. Zhao, D.H. Kim, J. Eckert, A.L. Greer: Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation, Scientific Reports 6 (2016), S. 25832/1-8 URL

M. Herklotz, J. Weiss, E. Ahrens, M. Yavuz, L. Mereacre, N. Kiziltas-Yavuz, C. Draeger, H. Ehrenberg, J. Eckert, F. Fauth, L. Giebeler, M. Knapp: A novel high-throughput setup for in situ powder diffraction on coin cell batteries, Journal of Applied Crystallography 49 (2016) Nr. 1, S. 340-345 URL

M. Hoffmann, S. Oswald, M. Zier, J. Eckert: Auger and X-ray photoelectron spectroscopy on lithiated HOPG, Surface and Interface Analysis 48 (2016) Nr. 7, S. 501-504 URL

J. Hufenbach, A. Helth, M.-H. Lee, H. Wendrock, L. Giebeler, C.-Y. Choe, K.-H. Kim, U. Kuehn, T.-S. Kim, J. Eckert: Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel, Materials Science and Engineering A 674 (2016), S. 366-374 URL

T. Jaumann, J. Balach, M. Klose, S. Oswald, J. Eckert, L. Giebeler: Role of 1,3-Dioxolane and LiNO3 Addition on the Long Term Stability of Nanostructured Silicon/Carbon Anodes for Rechargeable Lithium Batteries, Journal of The Electrochemical Society 163 (2016) Nr. 3, S. A557-A564 URL

H.Y. Jung, M. Stoica, S. Yi, D.H. Kim, J. Eckert: Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition, Intermetallics 69 (2016), S. 54-61 URL

I. Kaban, R. Nowak, G. Bruzda, L. Xi, N. Sobczak, J. Eckert, L. Giebeler: Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications, Carbon 98 (2016), S. 702-707 URL

F. Karnbach, X. Yang, G. Mutschke, J. Froehlich, J. Eckert, A. Gebert, K. Tschulik, K. Eckert, M. Uhlemann: Interplay of the Open Circuit Potential-Relaxation and the Dissolution Behavior of a Single H2 Bubble Generated at a Pt Microelectrode, The Journal of Physical Chemistry C 120 (2016) Nr. 28, S. 15137–15146 URL

M. Klose, R. Reinhold, K. Pinkert, M. Uhlemann, F. Wolke, J. Balach, T. Jaumann, U. Stoeck, J. Eckert, L. Giebeler: Hierarchically nanostructured hollow carbon nanospheres for ultrafast and long-life energy storage, Carbon 106 (2016), S. 306-313 URL

A. Krause, S. Doerfler, M. Piwko, F.M. Wisser, T. Jaumann, E. Ahrens, L. Giebeler, H. Althues, S. Schaedlich, J. Grothe, A. Jeffery, M. Grube, J. Brueckner, J. Martin, J. Eckert, S. Kaskel, T. Mikolajick, W.M. Weber: High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability, Scientific Reports 6 (2016), S. 27982/1-12 URL

L. Kuehn, A.-K. Herrmann, B. Rutkowski, M. Oezaslan, M. Nachtegaal, M. Klose, L. Giebeler, N. Gaponik, J. Eckert, T.J. Schmidt, A. Czyrska-Filemonowicz, A. Eychmueller: Alloying Behavior of Self-Assembled Noble Metal Nanoparticles, Chemistry: A European Journal 22 (2016) Nr. 38, S. 13446-13450 URL

J.-K. Lee, S.-Y. Kim, R.T. Ott, J.-Y. Kim, J. Eckert, M.-H. Lee: Effect of reinforcement phase on the mechanical property of tungsten nanocomposite synthesized by spark plasma sintering, International Journal of Refractory Metals and Hard Materials 54 (2016), S. 14-18 URL

P. Ma, Z.J. Wei, Y.D. Jia, C.M. Zou, S. Scudino, K.G. Prashanth, Z.S. Yu, S.L. Yang, C.G. Li, J. Eckert: Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si, Journal of Alloys and Compounds 688 (2016), S. 88-93 URL

P. Ma, Y. Jia, K.G. Prashanth, S. Scudino, Z. Yu, J. Eckert: Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting, Journal of Alloys and Compounds 657 (2016), S. 430-435 URL

M. Madian, M. Klose, T. Jaumann, A. Gebert, S. Oswald, N. Ismail, A. Eychmueller, J. Eckert, L. Giebeler: Anodically fabricated TiO2-SnO2 nanotubes and their application in lithium ion batteries, Journal of Materials Chemistry A 4 (2016) Nr. 15, S. 5542-5552 URL

D. Mikhailova, O.M. Karakulina, D. Batuk, J. Hadermann, A.M. Abakumov, M. Herklotz, A.A. Tsirlin, S. Oswald, L. Giebeler, M. Schmidt, J. Eckert, M. Knapp, H. Ehrenberg: Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion, Inorganic Chemistry 55 (2016) Nr. 14, S. 7079-7089 URL

S. Nayak, D.C. Joshi, M. Krautz, A. Waske, J. Eckert, S. Thota: Reentrant spin-glass behavior and bipolar exchange-bias effect in 'Sn' substituted cobalt-orthotitanate, Journal of Applied Physics 119 (2016) Nr. 4, S. 43901/1-12 URL

M. Nicoara, A. Raduta, R. Parthiban, C. Locovei, J. Eckert, M. Stoica: Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements, Acta Biomaterialia 36 (2016), S. 323-331 URL

J. Pang, A. Bachmatiuk, I. Ibrahim, L. Fu, D. Placha, G.S. Martynkova, B. Trzebicka, T. Gemming, J. Eckert, M.H. Ruemmeli: CVD growth of 1D and 2D sp2 carbon nanomaterials, Journal of Materials Science 51 (2016) Nr. 2, S. 640-667 URL

K.G. Prashanth, S. Scudino, A.K. Chaubey, L. Loeber, P. Wang, H. Attar, F.P. Schimansky, F. Pyczak, J. Eckert: Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties, Journal of Materials Research 31 (2016) Nr. 01, S. 55-65 URL

Y.S. Qin, Y. Shi, X.L. Han, K.K. Song, C.D. Cao, X.L. Li, S.H. Wang, J. He, L. Wang, I. Kaban, J. Eckert: Formation and phase evolution of liquid phase-separated metallic glasses with double glass transition, crystallization and melting, Materials Today Communications 8 (2016), S. 64-71 URL

A. Raduta, M. Nicoara, C. Locovei, J. Eckert, M. Stoica: Ti-based bulk glassy composites obtained by replacement of Ni with Ga, Intermetallics 69 (2016), S. 28-34 URL

P. Ramasamy, M. Stoica, A.H. Taghvaei, K.G. Prashanth, R. Kumar, J. Eckert: Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses, Journal of Applied Physics 119 (2016) Nr. 7, S. 73908/1-9 URL

G.K. Rane, M. Seifert, S. Menzel, T. Gemming, J. Eckert: Tungsten as a Chemically-Stable Electrode Material on Ga-Containing Piezoelectric Substrates Langasite and Catangasite for High-Temperature SAW Devices, Materials 9 (2016) Nr. 2, S. 101/1-9 URL

J. Romberg, J. Freudenberger, H. Bauder, G. Plattner, H. Krug, F. Hollaender, J. Scharnweber, A. Eschke, U. Kuehn, H. Klauss, C.-G. Oertel, W. Skrotzki, J. Eckert, L. Schultz: Ti/Al Multi-Layered Sheets: Accumulative Roll Bonding (Part A), Metals 6 (2016) Nr. 2, S. 30/1-14 URL

J. Romberg, J. Freudenberger, H. Watanabe, J. Scharnweber, A. Eschke, U. Kuehn, H. Klauss, C.-G. Oertel, W. Skrotzki, J. Eckert, L. Schultz: Ti/Al Multi-Layered Sheets: Differential Speed Rolling (Part B), Metals 6 (2016) Nr. 2, S. 31/1-15 URL

S.A. Rounaghi, H. Eshghi, S. Scudino, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R.K. Rashid, M.S. Khoshkhoo, U. Scheler, J. Eckert: Mechanochemical route to the synthesis of nanostructured Aluminium nitride, Scientific Reports 6 (2016), S. 33375/1-11 URL

J. Sander, J. Hufenbach, L. Giebeler, H. Wendrock, U. Kuehn, J. Eckert: Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting, Materials and Design 89 (2016), S. 335-341 URL

B. Sarac, L. Zhang, K. Kosiba, S. Pauly, M. Stoica, J. Eckert: Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses, Scientific Reports 6 (2016), S. 27271/1-8 URL

R. Schmidt, V. Hoffmann, A. Helth, P.F. Gostin, M. Calin, J. Eckert, A. Gebert: Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb, Surface and Coatings Technology 294 (2016), S. 186-193 URL

H. Schwab, F. Palm, U. Kuehn, J. Eckert: Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting, Materials & Design 105 (2016), S. 75-80 URL

H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, B. Escher, S. Menzel, G.B.M. Vaughan, U. Kuehn, J. Eckert: Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction, Acta Materialia 111 (2016), S. 187-193 URL

M.R. da Silva, P. Gargarella, T. Gustmann, W.J. Botta Filho, C.S. Kiminami, J. Eckert, S. Pauly, C. Bolfarini: Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy, Materials Science and Engineering A 661 (2016), S. 61-67 URL

F. Silze, G. Wiehl, I. Kaban, H. Wendrock, T. Gemming, U. Kuehn, J. Eckert, S. Pauly: Wetting behaviour of Cu-Ga alloys on 304L steel, Materials and Design 91 (2016), S. 11-18 URL

D. Sopu, A. Foroughi, M. Stoica, J. Eckert: Brittle-to-Ductile Transition in Metallic Glass Nanowires, Nano Letters 16 (2016) Nr. 7, S. 4467-4471 URL

D. Sopu, C. Soyarslan, B. Sarac, S. Bargmann, M. Stoica, J. Eckert: Structure-property relationships in nanoporous metallic glasses, Acta Materialia 106 (2016), S. 199-207 URL

U. Stoeck, J. Balach, M. Klose, D. Wadewitz, E. Ahrens, J. Eckert, L. Giebeler: Reconfiguration of lithium sulphur batteries: "Enhancement of Li-S cell performance by employing a highly porous conductive separator coating", Journal of Power Sources 309 (2016), S. 76-81 URL

J. Suryawanshi, K.G. Prashanth, S. Scudino, J. Eckert, O. Prakash, U. Ramamurty: Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting, Acta Materialia 115 (2016), S. 285-294 URL

X. Tong, G. Wang, J. Yi, J.L. Ren, S. Pauly, Y.L. Gao, Q.J. Zhai, N. Mattern, K.A. Dahmen, P.K. Liaw, J. Eckert: Shear avalanches in plastic deformation of a metallic glass composite, International Journal of Plasticity 77 (2016), S. 141-155 URL

X. Tong, G. Wang1, Z.H. Stachurski, J. Bednarcík, N. Mattern, Q.J. Zhai, J. Eckert: Structural evolution and strength change of a metallic glass at different temperatures, Scientific Reports 6 (2016), S. 30876/1-12 URL

H. Turnow, H. Wendrock, S. Menzel, T. Gemming, J. Eckert: Structure and properties of sputter deposited crystalline and amorphous Cu-Ti films, Thin Solid Films 598 (2016), S. 184-188 URL

R. Ummethala, D. Wenger, S.F. Tedde, C. Taeschner, A. Leonhardt, B. Buechner, J. Eckert: Effect of substrate material on the growth and field emission characteristics of large-area carbon nanotube forests, Journal of Applied Physics 119 (2016) Nr. 4, S. 44302/1-8 URL

U. Vogel, T. Gemming, J. Eckert, S. Oswald: Analysis of the thermal and temporal stability of Ta and Ti thin films onto SAW-substrate materials (LiNbO3 and LiTaO3) using AR-XPS, Surface and Interface Analysis 48 (2016) Nr. 7, S. 570-574 URL

X.H. Wang, A. Inoue, F.L. Kong, S.L. Zhu, M. Stoica, I. Kaban, C.T. Chang, E. Shalaan, F. Al-Marzouki, J. Eckert: Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys, Acta Materialia 116 (2016), S. 370-381 URL

Z. Wang, R.T. Qu, K.G. Prashanth, J. Eckert, S. Scudino: Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy, Materials Letters 185 (2016), S. 25 URL

D.Y. Wu, K.K. Song, P. Gargarella, C.D. Cao, R. Li, I. Kaban, J. Eckert: Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu-Zr-Zn alloys, Journal of Alloys and Compounds 664 (2016), S. 99-108 URL

L. Xi, I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert: Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic, Journal of Materials Science 51 (2016) Nr. 4, S. 1779-1787 URL

L. Xi, R. Kaban, G. Nowak, G. Bruzda, N. Sobczak, M. Stoica, J. Eckert: Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic, Journal of Materials Engineering and Performance 25 (2016) Nr. 8, S. 3204-3210 URL

Z. Yan, K. Song, Y. Hu, F. Dai, Z. Chu, J. Eckert: Localized crystallization in shear bands of a metallic glass, Scientific Reports 6 (2016), S. 19358/1-7 URL

J. Zeisig, J. Hufenbach, H. Wendrock, T. Gemming, J. Eckert, U. Kuehn: A study of the micro- and nanoscale deformation behavior of individual austenitic dendrites in a FeCrMoVC cast alloy using micro- and nanoindentation experiments, Applied Physics Letters 108 (2016) Nr. 14, S. 143103/1-5 URL

Zhang, L., S. Pauly, Z.W. Zhu, T. Gemming, H.M. Fu, J. Eckert, H.F. Zhang: Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass, Intermetallics 73 (2016), S. 5-11 URL

L.-C. Zhang, H. Attar, M. Calin, J. Eckert: Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications, Materials Technology 31 (2016) Nr. 2, S. 66-76 URL

L. Zhang, S. Pauly, M.Q. Tang, J. Eckert, H.F. Zhang: Two-phase quasi-equilibrium in ß-type Ti-based bulk metallic glass composites, Scientific Reports 6 (2016), S. 19235/1-10 URL

2015

H. Attar, K.G. Prashanth, A.K. Chaubey, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes, Materials Letters 142 (2015), S. 38-41 URL

H. Attar, K.G. Prashanth, L.-C. Zhang, M. Calin, I.V. Okuloy, S. Scudino, C. Yang, J. Eckert: Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting, Journal of Materials Science and Technology 31 (2015) Nr. 10, S. 1001-1005 URL

H. Attar, L. Loeber, A. Funk, M. Calin, L.C. Zhang, K.G. Prashanth, S. Scudino, Y.S. Zhang, J. Eckert: Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting, Materials Science and Engineering A 625 (2015), S. 350-356 URL

A. Bachmatiuk, J. Boeckl, H. Smith, I. Ibrahim, T. Gemming, S. Oswald, W. Kazmierczak, O.G. Schmidt, J. Eckert, L. Fu, M.H. Rummeli: Vertical Graphene Growth from Amorphous Carbon Films Using Oxidizing Gases, Journal of Physical Chemistry C 119 (2015) Nr. 31, S. 17965-17970 URL

A. Bachmatiuk, J. Zhao, S.M. Gorantla, I.G. Gonzalez Martinez, J. Wiedermann, C. Lee, J. Eckert, M.H. Rummeli: Low Voltage Transmission Electron Microscopy of Graphene, Small 11 (2015) Nr. 5, S. 515-542 URL

J. Balach, T. Jaumann, M. Klose, S. Oswald, J. Eckert, L. Giebeler: Mesoporous Carbon Interlayers with Tailored Pore Volume as Polysulfide Reservoir for High-Energy Lithium-Sulfur Batteries, Journal of Physical Chemistry C 119 (2015) Nr. 9, S. 4580-4587 URL

J. Balach, T. Jaumann, M. Klose, S. Oswald, J. Eckert, L. Giebeler: Functional Mesoporous Carbon-Coated Separator for Long-Life, High-Energy Lithium-Sulfur Batteries, Advanced Functional Materials 25 (2015) Nr. 33, S. 5285-5291 URL

O. Balci, K.G. Prashanth, S. Scudino, D. Agaogullari, I. Duman, M.L. Oevecoglu, V. Uhlenwinkel, J. Eckert: Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles, Metals 5 (2015) Nr. 2, S. 669-685 URL

M. Bleckmann, J. Gleinig, J. Hufenbach, H. Wendrock, L. Giebeler, J. Zeisig, U. Diekmann, J. Eckert, U. Kuehn: Effect of cooling rate on the microstructure and properties of FeCrVC, Journal of Alloys and Compounds 634 (2015), S. 200-207 URL

M. Boenisch, M. Calin, J. van Humbeeck, W. Skrotzki, J. Eckert: Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys, Materials Science and Engineering C 48 (2015), S. 511-520 URL

F. Cao, Y. Jia, K.G. Prashanth, P. Ma, J. Li, S. Scudino, F. Huang, J. Eckert, J. Sun: Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content, Materials and Design 74 (2015), S. 150-156 URL

A.K. Chaubey, S. Scudino, K.G. Prashanth, J. Eckert: Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium, Materials Science and Engineering A 625 (2015), S. 46-49 URL

P. Gargarella, S. Pauly, M. Stoica, G. Vaughan, C.R.M. Afonso, U. Kuehn, J. Eckert: Structural evolution in Ti-Cu-Ni metallic glasses during heating, APL materials 3 (2015) Nr. 1, S. 16101/1-6 URL

P. Gargarella, S. Pauly, M.F. de Oliveira, U. Kuehn, J. Eckert: Glass formation in the Ti-Cu system with and without Si additions, Journal of Alloys and Compounds 618 (2015), S. 413-420 URL

P. Gargarella, C.S. Kiminami, E.M. Mazzer, R.D. Cava, L.A. Basilio, C. Bolfarini, W.J. Botta, J. Eckert, T. Gustmann, S. Pauly: Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting, Materials Research-Ibero-american Journal of Materials 18 (2015) Nr. Suppl. 2, S. 35-38 URL

A. Gebert, S. Oswald, A. Helth, A. Voss, P.F. Gostin, M. Rohnke, J. Janek, M. Calin, J. Eckert: Effect of indium (In) on corrosion and passivity of a beta-type Ti-Nb alloy in Ringer's solution, Applied Surface Science 335 (2015), S. 213-222 URL

P.F. Gostin, D. Eigel, D. Grell, J. Eckert, E. Kerscher, A. Gebert: Comparing the pitting corrosion behavior of prominent Zr-based bulk metallic glasses, Journal of Materials Research 30 (2015) Nr. 2, S. 233-241 URL

P.F. Gostin, D. Eigel, D. Grell, M. Uhlemann, E. Kerscher, J. Eckert, A. Gebert: Stress corrosion cracking of a Zr-based bulk metallic glass, Materials Science and Engineering A 639 (2015), S. 681-690 URL

P.F. Gostin, D. Eigel, D. Grell, M. Uhlemann, E. Kerscher, J. Eckert, A. Gebert: Stress-Corrosion Interactions in Zr-Based Bulk Metallic Glasses, Metals 5 (2015) Nr. 3, S. 1262-1278 URL

D. Grell, P.F. Gostin, J. Eckert, A. Gebert, E. Kerscher: In Situ Electrochemical Analysis during Deformation of a Zr-Based Bulk Metallic Glass: A Sensitive Tool Revealing Early Shear Banding, Advanced Engineering Materials 17 (2015) Nr. 11, S. 1532-1535 URL

J. He, N. Mattern, I. Kaban, F. Dai, K. Song, Z. Yan, J. Zhao, D.H. Kim, J. Eckert: Enhancement of glass-forming ability and mechanical behavior of zirconium-lanthanide two-phase bulk metallic glasses, Journal of Alloys and Compounds 618 (2015), S. 795-802 URL

M. Hoffmann, M. Zier, S. Oswald, J. Eckert: Challenges for lithium species identification in complementary Auger and X-ray photoelectron spectroscopy, Journal of Power Sources 288 (2015), S. 434-440 URL

J. Hu, B.A. Sun, Y. Yang, C.T. Liu, S. Pauly, Y.X. Weng, J. Eckert: Intrinsic versus extrinsic effects on serrated flow of bulk metallic glasses, Intermetallics 66 (2015), S. 31-39 URL

A. Hynowska, A. Blanquer, E. Pellicer, J. Fornell, S. Surinach, M.D. Baro, A. Gebert, M. Calin, J. Eckert, C. Nogues, E. Ibanez, L. Barrios, J. Sort: Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery, Journal of Biomedical Materials Research Part B: Applied Biomaterials 103 (2015) Nr. 8, S. 1569-1579 URL

I. Ibrahim, J. Kalbacova, V. Engemaier, J. Pang, R.D. Rodriguez, D. Grimm, T. Gemming, D.R.T. Zahn, O.G. Schmidt, J. Eckert, M.H. Ruemmeli: Confirming the Dual Role of Etchants during the Enrichment of Semiconducting Single Wall Carbon Nanotubes by Chemical Vapor Deposition, Chemistry of Materials 27 (2015) Nr. 17, S. 5964-5973 URL

T. Jaumann, J. Balach, M. Klose, S. Oswald, U. Langklotz, A. Michaelis, J. Eckert, L. Giebeler: SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: the role of electrode preparation, FEC addition and binders, Physical Chemistry Chemical Physics 17 (2015) Nr. 38, S. 24956-24967 URL

H.Y. Jung, S.J. Choi, K.G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuehn, D.H. Kim, K.B. Kim, J. Eckert: Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study, Materials and Design 86 (2015), S. 703-708 URL

H.Y. Jung, M. Stoica, S. Yi, D.H. Kim, J. Eckert: Crystallization kinetics of Fe76.5-xC6.0Si3.3B5.5P8.7Cux (x = 0, 0.5, and 1 at. pct) bulk amorphous alloy, Metallurgical and Materials Transactions A 46 (2015) Nr. 6, S. 2415-2421 URL

H.Y. Jung, M. Stoica, S.H. Yi, D.H. Kim, J. Eckert: Influence of Al on glass forming ability and nanocrystallization behavior of cast-iron based bulk amorphous alloy, Journal of Materials Research 30 (2015) Nr. 06, S. 818-824 URL

I. Kaban, P. Jovari, B. Escher, D.T. Tran, G. Svensson, M.A. Webb, T.Z. Regier, V. Kokotin, B. Beuneu, T. Gemming, J. Eckert: Atomic structure and formation of CuZrAl bulk metallic glasses and composites, Acta Materialia 100 (2015), S. 369-376 URL

M. Samadi Khoshkhoo, S. Scudino, T. Gemming, J. Thomas, J. Freudenberger, M. Zehetbauer, C.C. Koch, J. Eckert: Nanostructure formation mechanism during in-situ consolidation of copper by room-temperature ball milling, Materials and Design 65 (2015), S. 1083-1090 URL

K.C. Kim, S.H. Park, M.Y. Na, H.J. Chang, W.T. Kim, N. Mattern, J. Eckert, Y. Yokoyama, K.B. Kim, D.H. Kim: Formation of nano-porous GeOx by de-alloying of an Al-Ge-Mn amorphous alloy, Scripta Materialia 104 (2015), S. 49-52 URL

M. Krautz, A. Funk, K.P. Skokov, T. Gottschall, J. Eckert, O. Gutfleisch, A. Waske: A new type of La(Fe,Si)13-based magnetocaloric composite with amorphous metallic matrix, Scripta Materialia 95 (2015), S. 50-53 URL

B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert, J.J. Kruzic: Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass, Materials Science and Engineering A 646 (2015), S. 242-248 URL

Q. Luo, G. Garbarino, B. Sun, D. Fan, Y. Zhang, Z. Wang, Y. Sun, J. Jiao, X. Li, P. Li, N. Mattern, J. Eckert, J. Shen: Hierarchical densification and negative thermal expansion in Ce-based metallic glass under high pressure, Nature Communications 6 (2015), S. 5703/1-9 URL

M. Madian, L. Giebeler, M. Klose, T. Jaumann, M. Uhlemann, A. Gebert, S. Oswald, N. Ismail, A. Eychmueller, J. Eckert: Self-Organized TiO2/CoO Nanotubes as Potential Anode Materials for Lithium Ion Batteries, ACS Sustainable Chemisty & Engineering 3 (2015) Nr. 5, S. 909-919 URL

R.G. Mendes, B. Koch, A. Bachmatiuk, X. Ma, S. Sanchez, C. Damm, O.G. Schmidt, T. Gemming, J. Eckert, M.H. Ruemmli: A size dependent evaluation of the cytotoxicity and uptake of nanographene oxide, Journal of Materials Chemistry B 3 (2015) Nr. 12, S. 2522-2529 URL

D. Mikhailova, A. Voss, S. Oswald, A.A. Tsirlin, M. Schmidt, A. Senyshyn, J. Eckert, H. Ehrenberg: Lithium Insertion into Li2MoO4: Reversible Formation of (Li3Mo)O4 with a Disordered Rock-Salt Structure, Chemistry of Materials 27 (2015) Nr. 12, S. 4485-4492 URL

S. Nayak, S. Thota, D.C. Joshi, M. Krautz, A. Waske, A. Behler, J. Eckert, T. Sarkar, M.S. Andersson, R. Mathieu, V. Narang, M.S. Seehra: Magnetic compensation, field-dependent magnetization reversal, and complex magnetic ordering in Co2TiO4, Physical Review B 92 (2015) Nr. 21, S. 214434/1-10 URL

S. Niyomsoan, P. Gargarella, N. Chomsaeng, P. Termsuksawad, U. Kuehn, J. Eckert: Phase Separation in Rapid Solidified Ag-rich Ag-Cu-Zr Alloys, Materials Research-Ibero-american Journal of Materials 18 (2015) Nr. Supl. 1 URL

I.V. Okulov, I.V. Soldatov, M.F. Sarmanova, I. Kaban, T. Gemming, K. Edstroem, J. Eckert: Flash Joule heating for ductilization of metallic glasses, Nature Communications 6 (2015), S. 7932/1-6 URL

I.V. Okulov, H. Wendrock, A.S. Volegov, H. Attar, U. Kuehn, W. Skrotzki, J. Eckert: High strength beta titanium alloys: New design approach, Materials Science and Engineering A 628 (2015), S. 297-302 URL

I.V. Okulov, M.F. Sarmanova, A.S. Volegov, A. Okulov, U. Kuehn, W. Skrotzki, J. Eckert: Effect of boron on microstructure and mechanical properties of multicomponent titanium alloys, Materials Letters 158 (2015), S. 111-114 URL

M. Oschatz, M. Zeiger, N. Jaeckel, P. Strubel, L. Borchardt, R. Reinhold, W. Nickel, J. Eckert, V. Presser, S. Kaskel: Emulsion soft templating of carbide-derived carbon nanospheres with controllable porosity for capacitive electrochemical energy storage, Journal of Materials Chemistry A 3 (2015) Nr. 35, S. 17983-17990 URL

J. Pang, A. Bachmatiuk, L. Fu, R.G. Mendes, M. Libera, D. Placha, G.S. Martynkova, B. Trzebicka, T. Gemming, J. Eckert, M.H. Ruemmeli: Direct synthesis of graphene from adsorbed organic solvent molecules over copper, RSC Advances 5 (2015) Nr. 75, S. 60884-60891 URL

J. Pang, A. Bachmatiuk, L. Fu, C. Yan, M. Zeng, J. Wang, B. Trzebicka, T. Gemming, J. Eckert, M.H. Rummeli: Oxidation as A Means to Remove Surface Contaminants on Cu Foil Prior to Graphene Growth by Chemical Vapor Deposition, Journal of Physical Chemistry C 119 (2015) Nr. 23, S. 13363-13368 URL

A. Panigrahi, M. Boenisch, T. Waitz, E. Schafler, M. Calin, J. Eckert, W. Skrotzki, M. Zehetbauer: Phase transformations and mechanical properties of biocompatible Ti-16.1Nb processed by severe plastic deformation, Journal of Alloys and Compounds 628 (2015), S. 434-441 URL

J.M. Park, K.H. Park, E.S. Park, S.-M. Hong, S.Y. Kim, S.S. Jee, E.S. Lee, S.J. Kim, K.B. Kim, D.H. Kim, J. Eckert: Effect of Metallic Glass Particle Size on the Contact Resistance of Ag/Metallic Glass Electrode, Metallurgical and Materials Transactions A 46 (2015) Nr. 6, S. 2443-2448 URL

R. Parthiban, M. Stoica, I. Kaban, R. Kumar, J. Eckert: Viscosity and fragility of the supercooled liquids and melts from the Fe-Co-B-Si-Nb and Fe-Mo-P-C-B-Si glass-forming alloy systems, Intermetallics 66 (2015), S. 48-55 URL

K.G. Prashanth, H. Shakur Shahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, S. Scudino: Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting, Additive Manufacturing 6 (2015), S. 1-5 URL

H.T. Quang, A. Bachmatiuk, A. Dianat, F. Ortmann, J. Zhao, J.H. Warner, J. Eckert, G. Cunniberti, M.H. Ruemmeli: In Situ Observations of Free-Standing Graphene-like Mono- and Bilayer ZnO Membranes, ACS Nano 9 (2015) Nr. 11, S. 11408-11413 URL

G.K. Rane, S. Menzel, M. Seifert, T. Gemming, J. Eckert: Tungsten/molybdenum thin films for application as interdigital transducers on high temperature stable piezoelectric substrates La3Ga5SiO14 and Ca3TaGa3Si2O14, Materials Science and Engineering B 202 (2015), S. 31-38 URL

B. Sarac, D. Sopu, E. Park, J.K. Hufenbach, S. Oswald, M. Stoica, J. Eckert: Mechanical and Structural Investigation of Porous Bulk Metallic Glasses, Metals 5 (2015) Nr. 2, S. 920-933 URL

H. Schwab, K.G. Prashanth, L. Loeber, U. Kuehn, J. Eckert: Selective Laser Melting of Ti-45Nb Alloy, Metals 5 (2015) Nr. 2, S. 686-694 URL

S. Scudino, C. Unterdoerfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, J. Eckert: Additive manufacturing of Cu-10Sn bronze, Materials Letters 156 (2015), S. 202-204 URL

S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, B. Escher, U. Kuehn, G.B.M. Vaughan, J. Eckert: Structural features of plastic deformation in bulk metallic glasses, Applied Physics Letters 106 (2015) Nr. 3, S. 31903/1-5 URL

S. Scudino, M. Stoica, I. Kaban, K.G. Prashanth, G.B.M. Vaughan, J. Eckert: Length scale-dependent structural relaxation in Zr57.5Ti7.5Nb5Cu12.5Ni10Al7.5 metallic glass, Journal of Alloys and Compounds 639 (2015), S. 465-469 URL

H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, U. Ruett, U. Kuehn, J. Eckert: Structural aspects of elasto-plastic deformation of a Zr-based bulk metallic glass under uniaxial compression, Acta Materialia 95 (2015), S. 30-36 URL

F. Silze, G. Wiehl, I. Kaban, U. Kuehn, J. Eckert, S. Pauly: Effect of Ga on the Wettability of CuGa10 on 304L Steel, Metallurgical and Materials Transactions B 46 (2015) Nr. 4, S. 1647-1653 URL

K.K. Song, D.Y. Wu, S. Pauly, C.X. Peng, L. Wang, J. Eckert: Thermal stability of B2 CuZr phase, microstructural evolution and martensitic transformation in Cu-Zr-Ti alloys, Intermetallics 67 (2015), S. 177-184 URL

D. Sopu, M. Stoica, J. Eckert: Deformation behavior of metallic glass composites reinforced with shape memory nanowires studied via molecular dynamics simulations, Applied Physics Letters 106 (2015) Nr. 21, S. 211902/1-4 URL

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, M. Nicoara, G.B.M. Vaughan, J. Wright, R. Kumar, J. Eckert: Structure evolution of soft magnetic (Fe36Co36B19.2Si4.8Nb4)100-xCux (x=0 and 0.5) bulk glassy alloys, Acta Materialia 95 (2015), S. 335-342 URL

T.H. Taghvaei, H. Shakur Shahabi, J. Bednarcik, J. Eckert: Inhomogeneous thermal expansion of metallic glasses in atomic-scale studied by in-situ synchrotron X-ray diffraction, Journal of Applied Physics 117 (2015) Nr. 4, S. 44902/1-7 URL

A.H. Taghvaei, J. Bednarcik, J. Eckert: Influence of annealing on microstructure and magnetic properties of cobalt-based amorphous/nanocrystalline powders synthesized by mechanical alloying, Journal of Alloys and Compounds 632 (2015), S. 296-302 URL

L. Tan, M. Zeng, Q. Wu, L. Chen, J. Wang, T. Zhang, J. Eckert, M.H. Ruemmeli, L. Fu: Direct Growth of Ultrafast Transparent Single-Layer Graphene Defoggers, Small 11 (2015) Nr. 15, S. 1840-1846 URL

U. Vogel, E. Brachmann, S. Oswald, S. Menzel, T. Gemming, J. Eckert: Evaluation of a mobile vacuum transfer system for in vacuo XPS analysis using as-deposited Ti thin-films, Vacuum 117 (2015), S. 81-84 URL

Z. Wang, K.G. Prashanth, A.K. Chaubey, L. Loeber, F.P. Schimansky, F. Pyczak, W.W. Zhang, S. Scudino, J. Eckert: Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles, Journal of Alloys and Compounds 630 (2015), S. 256-259 URL

Z. Wang, S. Scudino, M. Stoica, W. Zhang, J. Eckert: Al-based matrix composites reinforced with short Fe-based metallic glassy fiber, Journal of Alloys and Compounds 651 (2015), S. 170-175 URL

A. Waske, L. Giebeler, B. Weise, A. Funk, M. Hinterstein, M. Herklotz, K. Skokov, S. Faehler, O. Gutfleisch, J. Eckert: Asymmetric first-order transition and interlocked particle state in magnetocaloric La(Fe,Si)13, Physica Status Solidi - Rapid Research Letters 9 (2015) Nr. 2, S. 136-140 URL

Z. Wei, P. Ma, H. Wang, C. Zou, S. Scudino, K. Song, K.G. Prashanth, W. Jiang, J. Eckert: The thermal expansion behaviour of SiCp/ Al- 20Si composites solidified under high pressures, Materials and Design 65 (2015), S. 387-394 URL

Z. Whang, R.T. Qu, S. Scudino, B.A. Sun, K.G. Prashanth, D.V. Louzguine-Luzgin, M.W. Chen, Z.F. Zhang, J. Eckert: Hybrid nanostructured aluminum alloy with super-high strength, NPG Asia Materials 7 (2015), S. e229/1-8 URL

D. Wu, K. Song, C. Cao, R. Li, G. Wang, J. Wu, F. Wan, F. Ding, Y. Shi, X. Bai, I. Kaban, J. Eckert: Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites, Metals 5 (2015) Nr. 4, S. 2134-2147 URL

L. Xi, I. Kaban, R. Nowak, B. Korpala, G. Bruzda, N. Sobczak, N. Mattern, J. Eckert: High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic, Journal of Materials Science 50 (2015) Nr. 7, S. 2682-2690 URL

Z. Yan, Y. Hu, K. Song, F. Dai, J. He, J. Eckert: Vickers-indentation-induced crystallization in a metallic glass, Applied Physics Letters 106 (2015) Nr. 10, S. 101909/1-5 URL

2014

S. Abdi, M. Samadi Khoshkhoo, O. Shuleshova, M. Boenisch, M. Calin, L. Schultz, J. Eckert, M.D. Baro, J. Sort, A. Gebert: Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti-Zr-Si alloy, Intermetallics 46 (2014), S. 156-163 URL

F. Ali, S. Scudino, M.S. Anwar, R.N. Shahid, V.C. Srivastava, V. Uhlenwinkel, M. Stoica, G. Vaughan, J. Eckert: Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction, Journal of Alloys and Compounds 607 (2014), S. 274-279 URL

H. Attar, M. Boenisch, M. Calin, L.-C. Zhang, S. Scudino, J. Eckert: Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties, Acta Materialia 76 (2014), S. 13-22 URL

H. Attar, M. Boenisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert: Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies, Journal of Materials Research 29 (2014), S. 1941-1950 URL

H. Attar, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Materials Science and Engineering A 593 (2014), S. 170-177 URL

A. Bachmatiuk, R.F. Abelin, H.T. Quang, B. Trzebicka, J. Eckert, M.H. Ruemmeli: Chemical vapor deposition of twisted bilayer and few-layer MoSe2 over SiO x substrates, Nanotechnology 25 (2014) Nr. 36, S. 365603/1-5 URL

B. Boehme, C.B. Minella, F. Thoss, I. Lindemann, M. Rosenburg, C. Pistidda, C.T. Moeller, T.R. Jensen, L. Giebeler, M. Baitinger, O. Gutfleisch, H. Ehrenberg, J. Eckert, Y. Grin, L. Schultz: B1 - Mobilstor: Materials for sustainable energy storage techniques - Lithium containing compounds for hydrogen and electrochemical energy storage, Advanced Engineering Materials 16 (2014) Nr. 10, S. 1183-1195 URL

M. Boenisch, M. Calin, L. Giebeler, A. Helth, A. Gebert, W. Skrotzki, J. Eckert: Composition-dependent magnitude of atomic shuffles in Ti-Nb martensites, Journal of Applied Crystallography 47 (2014), S. 1374-1379 URL

V. Brackmann, V. Hoffmann, A. Kauffmann, A. Helth, J. Thomas, H. Wendrock, J. Freudenberger, T. Gemming, J. Eckert: Glow discharge plasma as a surface preparation tool for microstructure investigations, Materials Characterization 91 (2014), S. 76-88 URL

M. Calin, A. Helth, J.J. Gutierrez Moreno, M. Boenisch, V. Brackmann, L. Giebeler, T. Gemming, C.E. Lekka, A. Gebert, R. Schnettler, J. Eckert: Elastic softening of Beta-type Ti-Nb alloys by indium (In) additions, Journal of the Mechanical Behavior of Biomedical Materials 39 (2014), S. 162-174 URL

R.D. Cava, C. Bolfarini, C.S. Kiminami, E.M. Mazzer, W.J. Botta Filho, P. Gargarella, J. Eckert: Spray forming of Cu-11.85Al-3.2Ni-3Mn (wt%) shape memory alloy, Journal of Alloys and Compounds 615 (2014) Nr. S1, S. S602-S606 URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: High-strength ultrafine grain Mg- 7.4% Al alloy synthesized by consolidation of mechanically alloyed powders, Journal of Alloys and Compounds 610 (2014), S. 456-461 URL

M.O. Cichocka, J. Zhao, A. Bachmatiuk, H.T. Quang, S.M. Gorantla, I.G. Gonzalez-Martinez, L. Fu, J. Eckert, J.H. Warner, M.H. Ruemmeli: In situ observations of Pt nanoparticles coalescing inside carbon nanotubes, RSC Advances 4 (2014), S. 49442-49445 URL

S. Doerfler, K. Pinkert, M. Weiser, C. Wabnitz, A. Goldberg, B. Ferse, L. Giebeler, H. Althues, M. Schneider, J. Eckert, A. Michaelis, E. Beyer, S. Kaskel: D2 Enertrode: Production technologies and component integration of nanostructured carbon electrodes for energy technology - Functionalized carbon materials for efficient electrical energy supply, Advanced Engineering Materials 16 (2014) Nr. 10, S. 1196-1201 URL

P. Donnadieu, C. Pohlmann, S. Scudino, J.-J. Blandin, K.B. Surreddi, J. Eckert: Deformation at ambient and high temperature of in situ Laves phases-ferrite composites, Science and Technology of Advanced Materials 15 (2014), S. 34801/1-8 URL

A. Eschke, J. Scharnweber, C.-G. Oertel, W. Skrotzki, T. Marr, J. Romberg, J. Freudenberger, L. Schultz, I. Okulov, U. Kuehn, J. Eckert: Texture development in Ti/Al filament wires produced by accumulative swaging and bundling, Materials Science and Engineering A 607 (2014), S. 360-367 URL

A. Eschke, W. Zinn, T. Marr, C.-G. Oertel, W. Skrotzki, L. Schultz, J. Eckert: Local stress gradients in Ti/Al composite wires determined by two-dimensional X-ray microdiffraction, Materials Science and Engineering A 616 (2014), S. 44-54 URL

P. Gargarella, S. Pauly, M. Samadi Khoshkhoo, U. Kuehn, J. Eckert: Phase formation and mechanical properties of Ti-Cu-Ni-Zr bulk metallic glass composites, Acta Materialia 65 (2014), S. 259-269 URL

A. Gebert, P.F. Gostin, R. Sueptitz, S. Oswald, S. Abdi, M. Uhlemann, J. Eckert: Polarization studies of Zr-based bulk metallic glasses for electrochemical machining, Journal of The Electrochemical Society 161 (2014), S. E66-E73 URL

S. Gorantla, A. Bachmatiuk, J. Hwang, H.A. Alsalman, J.Y. Kwak, T. Seyller, J. Eckert, M.G. Spencer, M.H. Ruemmeli: A universal transfer route for graphene, Nanoscale 6 (2014), S. 889-896 URL

P.F. Gostin, H. Wendrock, I. Schneider, M. Bleckmann, M. Stoica, U. Kuehn, J. Eckert: Microstructure and mechanical properties of a newly developed high strength Mg54.7Cu11.5Ag3.3Gd5.5Sc25 alloy, Intermetallics 45 (2014), S. 84-88 URL

F. Haag, D. Beitelschmidt, J. Eckert, K. Durst: Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study, Acta Materialia 70 (2014), S. 188-197 URL

J.H. Han, N. Mattern, U. Vainio, A. Shariq, S.W. Sohn, D.H. Kim, J. Eckert: Phase separation in Zr56-xGdxCo28Al16 metallic glasses (0< x < 20), Acta Materialia 66 (2014), S. 262-272 URL

A. Helth, P.F. Gostin, S. Oswald, H. Wendrock, U. Wolff, U. Hempel, S. Arnhold, M. Calin, J. Eckert, A. Gebert: Chemical nanoroughening of Ti40Nb surfaces and its effect on human mesenchymal stromal cell response, Journal of Biomedical Materials Research, Part B - Applied Biomaterials 102 B (2014), S. 31-41 URL

M. Herklotz, F. Scheiba, R. Glaum, E. Mosymow, S. Oswald, J. Eckert, H. Ehrenberg: Electrochemical oxidation of trivalent chromium in a phosphatematrix: Li3Cr2(PO4)3as cathode material for lithium ion batteries, Electrochimica Acta 139 (2014), S. 356-364 URL

F.A. Javid, N. Mattern, M. Samadi Khoshkhoo, M. Stoica, S. Pauly, J. Eckert: Phase formation of Cu50xCoxZr50 (x = 0–20 at.%) alloys: Influence of cooling rate, Journal of Alloys and Compounds 590 (2014), S. 428-434 URL

Y. Jia, F. Cao, S. Scudino, P. Ma, H. Li, L. Yu, J. Eckert, J. Sun: Microstructure and thermal expansion behavior of spray-deposited Al-50Si, Materials and Design 57 (2014), S. 585-591 URL

H.Y. Jung, M. Stoica, S. Yi, D.H. Kim, J. Eckert: Electrical and magnetic properties of Fe-based bulk metallic glass with minor Co and Ni addition, Journal of Magnetism and Magnetic Materials 364 (2014), S. 80-84 URL

I. Kaban, K. Khalouk, F. Gasser, J.-G. Gasser, J. Bednarcik, O. Shuleshova, I. Okulov, T. Gemming, N. Mattern, J. Eckert: In situ studies of temperature-dependent behaviour and crystallisation of Ni36.5Pd36.5P27 metallic glass, Journal of Alloys and Compounds 615 (2014), S. S208-S212 URL

I. Kaban, P. Jovari, A. Waske, M. Stoica, J. Bednarcik, B. Beuneu, N. Mattern, J. Eckert: Atomic structure and magnetic properties of Fe-Nb-B metallic glasses, Journal of Alloys and Compounds 586 (2014) Nr. Suppl. 1, S. S189-S193 URL

F. Karnbach, M. Uhlemann, A. Gebert, J. Eckert, K. Tschulik: Magnetic field templated patterning of the soft magnetic alloy CoFe, Electrochimica Acta 123 (2014), S. 477-484 URL

S.M. Khoshkhoo, S. Scudino, J. Bednarcik, A. Kauffmann, H. Bahmanpour, J. Freudenberger, R. Scattergood, M.J. Zehetbauer, C.C. Koch, J. Eckert: Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis, Journal of Alloys and Compounds 588 (2014), S. 138-143 URL

M. Klose, I. Lindemann, C. Bonatto Minella, K. Pinkert, M. Zier, L. Giebeler, P. Nolis, M.D. Baro, S. Oswald, O. Gutfleisch, H. Ehrenberg, J. Eckert: Unusual oxidation behavior of light metal hydride by tetrahydrofuran solvent molecules confined in ordered mesoporous carbon, Journal of Materials Research 29 (2014) Nr. 1, S. 55-63 URL

M. Klose, K. Pinkert, M. Zier, M. Uhlemann, F. Wolke, T. Jaumann, P. Jehnichen, D. Wadewitz, S. Oswald, J. Eckert, L. Giebeler: Hollow carbon nano-onions with hierarchical porosity derived from commercial metal organic framework, Carbon 79 (2014), S. 302-309 URL

M. Krautz, J. Hosko, K. Skokov, P. Svec, M. Stoica, L. Schultz, J. Eckert, O. Gutfleisch, A. Waske: Pathways for novel magnetocaloric materials: A processing prospect, Physica Status Solidi (c) 11 (2014) Nr. 5-6, S. 1039-1042 URL

M.H. Lee, B.S. Kim, D.H. Kim, R.T. Ott, F. Sansoz, J. Eckert: Effect of geometrical constraint condition on the formation of nanoscale twins in the Ni-based metallic glass composite, Philosophical Magazine Letters 94 (2014) Nr. 6, S. 351-360 URL

M.H. Lee, E.S. Park, R.T. Ott, B.S. Kim, J. Eckert: Evaluation of the relationship between the effective strain and the springback behavior during the deformation of metallic glass ribbons, Applied Physics Letters 105 (2014) Nr. 6, S. 61906/1-3 URL

S.W. Lee, J.T. Kim, S.H. Hong, H.J. Park, J.-Y. Park, N.S. Lee, Y. Seo, J.Y. Suh, J. Eckert, D.H. Kim, J.M. Park, K.B. Kim: Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite, Scientific Reports 4 (2014), S. 6500/1-5 URL

K. Li, C. Song, Q. Zhai, M. Stoica, J. Eckert: Microstructure evolution of gas-atomized Fe- 6.5 wt% Si droplets, Journal of Materials Research 29 (2014) Nr. 4, S. 527-534 URL

L. Loeber, F.P. Schimansky, U. Kuehn, F. Pyczak, J. Eckert: Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy, Journal of Materials Processing Technology 214 (2014) Nr. 9, S. 1852-1860 URL

M. Luckabauer, U. Kuehn, J. Eckert, W. Sprengel: Specific volume study of a bulk metallic glass far below its calorimetrically determined glass transition temperature, Physical Review B 89 (2014) Nr. 17, S. 174113/1-6 URL

P. Ma, K.G. Prashanth, S. Scudino, Y. Jia, H. Wang, C. Zou, Z. Wei, J. Eckert: Influence of annealing on mechanical properties of Al- 20Si processed by selective laser melting, metals 4 (2014), S. 28-36 URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, B.G. Fu, Z.J. Wei, U. Kuehn, J. Eckert: Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al–20Si alloy, Journal of Alloys and Compounds 586 (2014), S. 639-644 URL

D. Marko, K.G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert: Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading, Journal of Alloys and Compounds 615 (2014), S. S382-S385 URL

M.L. Martine, G. Parzych, F. Thoss, L. Giebeler, J. Eckert: Na-Sb-Sn ternary phase diagram at room temperature for potential anode materials in sodium-ion batteries, Solid State Ionics 268 (2014), S. 261-264 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Nd-Ti system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 47 (2014), S. 136-143 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Nd-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46 (2014), S. 103-107 URL

N. Mattern, J.H. Han, K.G. Pradeep, K.C. Kim, E.M. Park, D.H. Kim, Y. Yokoyama, D. Raabe, J. Eckert: Structure of rapidly quenched (Cu0.5Zr0.5)100xAgx alloys (x = 0–40 at.%), Journal of Alloys and Compounds 607 (2014), S. 285-290 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, H. Wendrock, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Ce-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46 (2014), S. 213-219 URL

E.M. Mazzer, C.S. Kiminami, P. Gargarella, R.D. Cava, L.A. Basilio, C. Bolfarini, W.J. Botta, J. Eckert, T. Gustmann, S. Pauly: Atomization and selective laser melting of a Cu-Al-Ni-Mn shape memory alloy, Materials Science Forum 802 (2014), S. 343-348 URL

R. Medda, A. Helth, P. Herre, D. Pohl, B. Rellinghaus, N. Perschmann, S. Neubauer, H. Kessler, S. Oswald, J. Eckert, J.P. Spatz, A. Gebert, E.A. Cavalcanti-Adam: Investigation of early cell-surface interactions of human mesenchymal stem cells on nanopatterned beta- type titanium niobium alloy surfaces, Interface Focus 4 (2014) Nr. 1, S. 20130046/1-11 URL

A. Meier, M. Weinberger, K. Pinkert, M. Oschatz, S. Paasch, L. Giebeler, H. Althues, E. Brunner, J. Eckert, S. Kaskel: Silicon oxycarbide-derived carbons from a polyphenylsilsequioxane precursor for supercapacitor applications, Microporous and Mesoporous Materials 188 (2014), S. 140-148 URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert: Inverse Hall-Petch like mechanical behaviour in nanophase AlCuFe quasicrystals: A new phenomenon, Acta Physica Polonica A 126 (2014) Nr. 2, S. 543-548 URL

I.V. Okulov, U. Kuehn, T. Marr, J. Freudenberger, L. Schultz, C.-G. Oertel, W. Skrotzki, J. Eckert: Deformation and fracture behavior of composite structured Ti-Nb-Al-Co(-Ni) alloys, Applied Physics Letters 104 (2014) Nr. 7, S. 71905/1-4 URL

I.V. Okulov, U. Kuehn, T. Marr, J. Freudenberger, I.V. Soldatov, L. Schultz, C.-G. Oertel, W. Skrotzki, J. Eckert: Microstructure and mechanical properties of new composite structured Ti–V–Al–Cu–Ni alloys for spring applications, Materials Science and Engineering A 603 (2014), S. 76-83 URL

I.V. Okulov, U. Kuehn, J. Romberg, I.V. Soldatov, J. Freudenberger, L. Schultz, A. Eschke, C.-G. Oertel, W. Skrotzki, J. Eckert: Mechanical behavior and tensile/compressive strength asymmetry of ultrafine structured Ti-Nb-Ni-Co-Al alloys with bi-modal grain size distribution, Materials and Design 62 (2014), S. 14-20 URL

I.V. Okulov, M. Boenisch, U. Kuehn, W. Skrotzki, J. Eckert: Significant tensile ductility and toughness in an ultrafine-structured Ti68.8Nb13.6Co6Cu5.1Al6.5 bi-modal alloy, Materials Science and Engineering A 615 (2014), S. 457-463 URL

M. Oschatz, L. Borchardt, K. Pinkert, S. Thieme, M.R. Lohe, C. Hoffmann, M. Benusch, F.M. Wisser, C. Ziegler, L. Giebeler, M.H. Ruemmeli, J. Eckert, A. Eychmueller, S. Kaskel: Hierarchical carbide-derived carbon foams with advanced mesostructure as a versatile electrochemical energy- storage material, Advanced Energy Materials 4 (2014) Nr. 2, S. 1300645/1-9 URL

S. Oswald, U. Vogel, J. Eckert: ARXPS measurement simulation for improved data interpretation at complex Ta/Li-niobate interfaces, Surface and Interface Analysis 46 (2014), S. 1094-1098 URL

S. Oswald, P.-F. Gostin, A. Helth, S. Abdi, L. Giebeler, H. Wendrock, M. Calin, J. Eckert, A. Gebert: XPS and AES sputter-depth profiling at surfaces of biocompatible passivated Ti-based alloys: Concentration quantification considering chemical effects, Surface and Interface Analysis 46 (2014) Nr. 10-11, S. 683-688 URL

J.M. Park, K.R. Lim, E.S. Park, S. Hong, K.H. Park, J. Eckert, D.H. Kim: Internal structural evolution and enhanced tensile plasticity of Ti-based bulk metallic glass and composite via cold rolling, Journal of Alloys and Compounds 615 (2014) Nr. S1, S. S113-S117 URL

G. Parzych, D. Mikhailova, S. Oswald, C. Taeschner, M. Ritschel, A. Leonhardt, J. Eckert, H. Ehrenberg: Improved electrochemical performance of Cu3B2O6-based conversion model electrodes by composite formation with different carbon additives, Journal of The Electrochemical Society 161 (2014), S. A1224-A1230 URL

S. Pauly, K. Kosiba, P. Gargarella, B. Escher, K.K. Song, G. Wang, U. Kuehn, J. Eckert: Microstructural evolution and mechanical behaviour of metastable Cu-Zr-Co alloys, Journal of Material Science and Technologie 30 (2014) Nr. 6, S. 584-589 URL

K. Pinkert,  M. Oschatz, L. Borchardt,  M. Klose,  M. Zier,  W. Nickel,  L. Giebeler,  S. Oswald,  S. Kaskel, J. Eckert: Role of surface functional groups in ordered mesoporous carbide- derived carbon/ionic liquid electrolyte double-layer capacitor interfaces, ACS Applied Materials and Interfaces 6 (2014), S. 2922-2928 URL

K.G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert: Friction welding of Al-12Si parts produced by selective laser melting, Materials and Design 57 (2014), S. 632-637 URL

K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kuehn, M. Kamaraj, S. Scudino, J. Eckert: Tribological and corrosion properties of Al-12Si produced by selective laser melting, Journal of Materials Research 29 (2014) Nr. 17, S. 2044-2054 URL

K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Loeber, Z. Wang, A.K. Chaubey, U. Kuehn, J. Eckert: Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment, Materials Science and Engineering A 590 (2014), S. 153-160 URL

A. Raduta, M. Nicoara, C. Locovei, M. Stoica, J. Eckert: About replacement of Nickel as amorphization element for fabrication of ultra-rapidly solidified Ti-Zr alloys, Solid State Phenomena 216 (2014) Nr. 3, S. 3-10 URL

G.K. Rane, S. Menzel, T. Gemming, J. Eckert: Microstructure, electrical resistivity and stresses in sputter deposited W and Mo films and the influence of the interface on bilayer properties, Thin Solid Films 571 (2014), S. 1-8 URL

J. Ren, C. Chen, G. Wang, W.-S. Cheung, B. Sun, N. Mattern, S. Siegmund, J. Eckert: Various sizes of sliding event bursts in the plastic flow of metallic glasses based on a spatiotemporal dynamic model, Journal of Applied Physics 116 (2014), S. 33520/1-3 URL

K. Sakaushi, E. Hosono, G. Nickerl, H. Zhou, S. Kaskel, J. Eckert: Bipolar porous polymeric frameworks for low-cost, high-power, long-life all-organic energy storage devices, Journal of Power Sources 245 (2014), S. 553-556 URL

T. Schied, H. Ehrenberg, J. Eckert, S. Oswald, M. Hoffmann, F. Scheiba: An O2 transport study in porous materials within the Li-O2 -system, Journal of Power Sources 269 (2014), S. 825-833 URL

H. Shakur Shahabi, S. Scudino, U. Kuehn, J. Eckert: Metallic glass-steel composite with improved compressive plasticity, Materials and Design 59 (2014), S. 241-245 URL

W. Skrotzki, A. Eschke, J. Romberg, J. Scharnweber, T. Marr, R. Petters, I. Okulov, C.-G. Oertel, J. Freudenberger, U. Kuehn, L. Schultz, J. Eckert: Processing of high strength light-weight metallic composites, Advanced Engineering Materials 16 (2014) Nr. 10, S. 1208-1216 URL

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert: FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction, Journal of Applied Physics 115 (2014) Nr. 5, S. 53520/1-9 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Retarding the corrosion of iron by inhomogeneous magnetic fields, Materials and Corrosion 65 (2014) Nr. 8, S. 803-808 URL

A.H. Taghvaei, M. Stoica, I. Kaban, J. Bednarcik, J. Eckert: Thermal and soft magnetic properties of Co40Fe22Ta8B30 glassy particles: In-situ X-ray diffraction and magnetometry studies, Journal of Applied Physics 116 (2014), S. 54904/1-8 URL

A.H. Taghvaei, M. Stoica, J. Bednarcik, I. Kaban, H.S. Shahabi, M.S. Khoshkhoo, K. Janghorban, J. Eckert: Influence of ball milling on atomic structure and magnetic properties of Co40Fe22Ta8B30 glassy alloy, Materials Characterization 92 (2014), S. 96-105 URL

A.H. Taghvaei, H.S. Shahabi, J. Bednarcik, J. Eckert: Fabrication and characterization of Co40Fe22Ta8-xYxB30 (x=0, 2.5, 4, 6, and 8) metallic glasses with high thermal stability and good soft magnetic properties, Journal of Applied Physics 116 (2014), S. 184904/1-5 URL

A.H. Taghvaei, M. Stoica, K. Song, K. Janghorban, J. Eckert: Crystallization kinetics of Co40Fe22Ta8B30 glassy alloy with high thermal stability and soft magnetic properties, Journal of Alloys and Compounds 605 (2014), S. 199-207 URL

J. Tan, G. Wang, Z.Y. Liu, J. Bednarcik, Y.L. Gao, Q.J. Zhai, N. Mattern, J. Eckert: Correlation between atomic structure evolution and strength in a bulk metallic glass at cryogenic temperature, Scientific Reports 4 (2014), S. 3897/1-7 URL

A. Teresiak, M. Uhlemann, J. Thomas, J. Eckert, A. Gebert: Influence of Co and Pd on the formation of nanostructured LaMg2Ni and its hydrogen reactivity, Journal of Alloys and Compounds 582 (2014), S. 647-658 URL

F. Thoss, L. Giebeler, K. Weisser, J. Feller, J. Eckert: Preparation and cycling performance of Iron or Iron Oxide containing amorphous Al-Li alloys as electrodes, Inorganics 2 (2014), S. 674-682 URL

H. Turnow, H. Wendrock, S. Menzel, T. Gemming, J. Eckert: Synthesis and characterization of amorphous Ni-Zr thin films, Thin Solid Films 561 (2014), S. 48-52 URL

U. Vogel, T. Gemming, J. Eckert, S. Oswald: Analysis of surface pre-treatment for SAW substrate material (LiNbO3) and deposited thin films of Ta/Ti using ARXPS, Surface and Interface Analysis 46 (2014), S. 1033-1038 URL

Z. Wang, J. Tan, B.A. Sun, S. Scudino, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert: Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles, Materials Science and Engineering A 600 (2014), S. 53-58 URL

Z. Wang, J. Tan, S. Scudino, B.A. Sun, R.T. Qu, J. He, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert: Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses, Advanced Powder Technology 25 (2014) Nr. 2, S. 635-639 URL

G. Wang, S. Pauly, S. Gorantla, N. Mattern, J. Eckert: Plastic flow of a Cu50Zr45Ti5 bulk metallic glass composite, Journal of Material Science and Technologie 30 (2014) Nr. 6, S. 609-615 URL

Z. Wang, K.G. Prashanth, S. Scudino, A.K. Chaubey, D.J. Sordelet, W.W. Zhang, Y.Y. Li, J. Eckert: Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles, Journal of Alloys and Compounds 586 (2014) Nr. Suppl. 1, S. S419-S422 URL

Z. Wang, K.G. Prashanth, S. Scudino, J. He, W.W. Zhang, Y.Y. Li, M. Stoica, G. Vaughan, D.J. Sordelet, J. Eckert: Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders, Intermetallics 46 (2014), S. 97-102 URL

J. Zhao, Q. Deng, A. Bachmatiuk, G. Sandeep, A. Popov, J. Eckert, M.H. Ruemmeli: Free-standing single-atom-thick iron membranes suspended in graphene pores, Science 343 (2014), S. 1228-1232 URL

L.-F. Zhu, M. Friak, A. Udyansky, D. Ma, A. Schlieter, U. Kuehn, J. Eckert, J. Neugebauer: Ab initio based study of finite-temperature structural, elastic and thermodynamic properties of FeTi, Intermetallics 45 (2014), S. 11-17 URL

K. Zhuravleva, R. Mueller, L. Schultz, J. Eckert, A. Gebert, M. Bobeth, G. Cuniberti: Determination of the Young’s modulus of porous beta- type Ti-40Nb by finite element analysis, Materials and Design 64 (2014), S. 1-8 URL

K. Zhuravleva, M. Boenisch, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Phase transformations in ball-milled Ti-40Nb and Ti-45Nb powders upon quenching from the beta--phase region, Powder Technology 253 (2014), S. 166-171 URL

M. Zier, F. Scheiba, S. Oswald, J. Thomas, D. Goers, T. Scherer, M. Klose, H. Ehrenberg, J. Eckert: Lithium dendrite and solid electrolyte interphase investigation using OsO4, Journal of Power Sources 266 (2014), S. 198-207 URL

2013

F. Ali, S. Scudino, S.M. Gorantla, V.C. Srivastava, H.R. Shahid, V. Uhlenwinkel, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, J. Eckert: Mechanically driven phase transformation in single phase Al62.5Cu25Fe12.5 quasi-crystals: Effect of milling intensity, Acta Materialia 61 (2013), S. 3819-3830 URL

A. Bachmatiuk, R.G. Mendes, C. Hirsch, J. Jaehne, M.R. Lohe, J. Grothe, S. Kaskel, L. Fu, R. Klingeler, J. Eckert, P. Wick, M.H. Ruemmeli: Few-layer graphene shells and nonmagnetic encapsulates: A versatile and nontoxic carbon nanomaterial, ACS nano 7 (2013) Nr. 12, S. 10552-10562 URL

A. Behler, N. Teichert, B. Dutta, A. Waske, T. Hickel, A. Auge, A. Huetten, J. Eckert: Thickness dependent exchange bias in martensitic epitaxial Ni-Mn-Sn thin films, AIP Advances 3 (2013) Nr. 12, S. 122112/1-9 URL

M. Boenisch, M. Calin, T. Waitz, A. Panigrahi, M. Zehetbauer, A. Gebert, W. Skrotzki, J. Eckert: Thermal stability and phase transformations of martensitic Ti-Nb alloys, Science and Technology of Advanced Materials 14 (2013), S. 55004/1-9 URL

N. Brun, K. Sakaushi, L. Yu, L. Giebeler, J. Eckert, M.M. Titirici: Hydrothermal carbon-based nanostructured hollow spheres as electrode materials for high-power lithium-sulfur batteries, Physical Chemistry Chemical Physics 15 (2013), S. 6080-6087 URL

M. Calin, A. Gebert, A.C. Ghinea, P.F. Gostin, S. Abdi, C. Mickel, J. Eckert: Designing biocompatible Ti-based metallic glasses for implant applications, Materials Science and Engineering C 33 (2013) Nr. 2, S. 875-883 URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: Synthesis and characterization of nanocrystallineMg-7.4%Al powders produced by mechanical alloying, Metals 3 (2013) Nr. 1, S. 58-68 URL

A.E. Chivu, S. Ciuca, D. Bojin, G.E. Stan, A. Gebert, J. Eckert: Electrochemical deposited hydroxyapatite on pre-treated Cp-Ti surfaces, Metalurgia International 18 (2013) Nr. Special Issue, 1, S. 34-38

J.W. Cui, M. Calin, J. Eckert, Z.F. Zhang: Tensile fracture dynamics and intrinsic plasticity of metallic glasses, Applied Physics Letters 102 (2013) Nr. 3, S. 31908/1-4 URL

F.S. Fedorov, I. Moench, C. Mickel, K. Tschulik, B. Zhao, M. Uhlemann, A. Gebert, J. Eckert: Electrochemical deposition of Co(Cu)/Cu multilayered nanowires, Journal of the Electrochemical Society 160 (2013), S. D13-D19 URL

P. Gargarella, S. Pauly, K.K. Song, J. Hu, N.S. Barekar, M. Samadi Khoshkhoo, A. Teresiak, H. Wendrock, U. Kuehn, C. Ruffing, E. Kerscher, J. Eckert: Ti-Cu-Ni shape memory bulk metallic glass composites, Acta Materialia 61 (2013) Nr. 1, S. 151-162 URL

M. Goettlicher, M. Rohnke, A. Helth, T. Leichtweiss, T. Gemming, A. Gebert, J. Eckert, J. Janek: Controlled surface modification of Ti-40Nb implant alloy by electrochemically assisted inductively coupled RF plasma oxidation, Acta Biomaterialia 9 (2013), S. 9201-9210 URL

M. Gogebakan, C. Kursun, J. Eckert: Formation of new Cu-based nanocrystalline powders by mechanical alloying technique, Powder Technology 247 (2013), S. 172-177 URL

P.F. Gostin, A. Helth, A. Voss, R. Sueptitz, M. Calin, J. Eckert, A. Gebert: Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy, Journal of Biomedical Materials Research Part B 101 (2013) Nr. 2, S. 269-278 URL

J.H. Han, N. Mattern, I. Kaban, D. Holland-Moritz, J. Bednarcik, R. Nowak, N. Sobczak, D.H. Kim, J. Eckert: Phase separation in ternary Co-Gd-Ti liquids, Journal of Physics - Condensed Matter 25 (2013) Nr. 24, S. 245104/1-7 URL

J. He, N. Mattern, J. Tan, J.Z. Zhao, I. Kaban, Z. Wang, L. Ratke, D.H. Kim, W.T. Kim, J. Eckert: A bridge from monotectic alloys to liquid-phase-separated bulk metallic glasses: Design, microstructure and phase evolution, Acta Materialia 61 (2013), S. 2102-2112 URL

A. Helth, U. Siegel, U. Kuehn, T. Gemming, W. Gruner, S. Oswald, T. Marr, J. Freudenberger, J. Scharnweber, C.-G. Oertel, W. Skrotzki, L. Schultz, J. Eckert: Influence of boron and oxygen on the microstructure and mechanical properties of high-strength Ti66Nb13Cu8Ni6.8Al6.2 alloys, Acta Materialia 61 (2013) Nr. 9, S. 3324-3334 URL

M. Herklotz, F. Scheiba, M. Hinterstein, K. Nikolowski, M. Knapp, A.-C. Dippel, L. Giebeler, J. Eckert, H. Ehrenberg: Advances in in situ powder diffraction of battery materials: A case study of the new beamline P02.1 at DESY, Hamburg, Journal of Applied Crystallography 46 (2013), S. 1117-1127 URL

J. Hufenbach, K. Kunze, L. Giebeler, T. Gemming, H. Wendrock, C. Baldauf, U. Kuehn, W. Hufenbach, J. Eckert: The effect of boron on microstructure and mechanical properties of high-strength cast FeCrVC, Materials Science and Engineering A 586 (2013), S. 267-275 URL

I. Kaban, P. Jovari, V. Kokotin, O. Shuleshova, B. Beuneu, K. Saksl, N. Mattern, J. Eckert, A.L. Greer: Local atomic arrangements and their topology in Ni-Zr and Cu-Zr glassy and crystalline alloys, Acta Materialia 61 (2013) Nr. 7, S. 2509-2520 URL

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, T. Gemming, H. Wendrock, J. Eckert: Size evaluation of nanostructured materials, Materials Letters 108 (2013), S. 343-345 URL

D.H. Kim, W.T. Kim, E.S. Park, N. Mattern, J. Eckert: Phase separation in metallic glasses, Progress in Materials Science 58 (2013) Nr. 8, S. 1103-1172 URL

S.Y. Kim, S.J. Kim, S.S. Jee, J.M. Park, K.H. Park, S.C. Park, E.A. Cho, J.H. Lee, I.Y. Song, S.M. Lee, I.T. Han, K.R. Lim, W.T. Kim, J.C. Park, J. Eckert, D.H. Kim, E.-S. Lee: Capillary flow of amorphous metal for high performance electrode, Scientific Reports 3 (2013), S. 2185/1-7 URL

K.C. Kim, K.R. Lim, E.S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Thermal stability of amorphous oxide in Al87Ni3Y10 metallic glass, Corrosion Science 77 (2013), S. 1-5 URL

K. Kosiba, P. Gargarella, S. Pauly, U. Kuehn, J. Eckert: Predicted glass-forming ability of Cu-Zr-Co alloys and their crystallization behavior, Journal of Applied Physics 113 (2013), S. 123505/1-4 URL

N.V. Kuratieva, M. Banki, A.A. Tsirlin, J. Eckert, Ehrenberg H., D. Mikhailova: New lithium copper borates with BO3 triangles: Li6CuB4O10, Li3CuB3O7, Li8Cu7B14O32, and Li2Cu9B12O28, Inorganic Chemistry 52 (2013), S. 13974-13983 URL

C.J. Li, J. Tan, X.K. Zhu, Y. Zhang, M. Stoica, U. Kuehn, J. Eckert: On the transformation-induced work-hardening behavior of Zr47.5Co47.5Al5 ultrafine-grained alloy, Intermetallics 35 (2013), S. 116-119 URL

C.J. Li, J. Tan, G. Wang, J. Bednarcik, X.K. Zhu, Y. Zhang, M. Stoica, U. Kuehn, J. Eckert: Enhanced strength and transformation-induced plasticity in rapidly solidified Zr-Co- (Al) alloys, Scripta Materialia 68 (2013) Nr. 11, S. 897-900 URL

K.R. Lim, J.M. Park, S.J. Kim, E.-S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Enhancement of oxidation resistance of the supercooled liquid in Cu-Zr-based metallic glass by forming an amorphous oxide layer with high thermal stability, Corrosion Science 66 (2013), S. 1-4 URL

K.R. Lim, J.M. Park, S.S. Jee, S.Y. Kim, S.J. Kim, E.-S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Effect of thermal stability of the amorphous substrate on the amorphous oxide growth on Zr–Al–(Cu,Ni) metallic glass surfaces, Corrosion Science 73 (2013), S. 1-6 URL

L. Loeber, C. Flache, R. Petters, U. Kuehn, J. Eckert: Comparison of different post processing technologies for SLM generated 316l steel parts, Rapid Prototyping Journal 19 (2013) Nr. 3, S. 173-179 URL

Q. Luo, B. Schwarz, N. Mattern, J. Shen, J. Eckert: Roles of hydrogenation, annealing and field in the structure and magnetic entropy change of Tb-based bulk metallic glasses, AIP Advances 3 (2013), S. 32134/1-17 URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, K.K. Song, M. Samadi Khoshkhoo, Z.J. Wei, U. Kuehn, J. Eckert: Structure of GP zones in Al-Si matrix composites solidified under high pressure, Materials Letters 109 (2013), S. 1-4 URL

G.Z. Ma, B.A. Sun, S. Pauly, K.K. Song, U. Kuehn, D. Chen, J. Eckert: Effect of Ti substitution on glass-forming ability and mechanical properties of a brittle Cu–Zr–Al bulk metallic glass, Materials Science and Engineering A 563 (2013), S. 112-116 URL

G.Z. Ma, K.K. Song, B.A. Sun, Z.J. Yan, U. Kuehn, D. Chen, J. Eckert: Effect of cold-rolling on the crystallization behavior of a CuZr-based bulk metallic glass, Journal of Materials Science 48 (2013), S. 6825-6832 URL

T. Marr, J. Freudenberger, A. Kauffmann, J. Romberg, I. Okulov, R. Petters, J. Scharnweber, A. Eschke, C.-G. Oertel, U. Kuehn, J. Eckert, W. Skrotzki, L. Schultz: Processing of intermetallic titanium aluminide wires, metals 3 (2013), S. 188-201 URL

N. Mattern, J. Bednarcik, H.-P. Liermann, J. Eckert: Structural behaviour of Pd40Cu30Ni10P20 metallic glass under high pressure, Intermetallics 38 (2013), S. 9-13 URL

N. Mattern, J. Bednarcik, M. Stoica, J. Eckert: Temperature dependence of the short-range order of Cu65Zr35 metallic glass, Intermetallics 32 (2013), S. 51-56 URL

N. Mattern, J.H. Han, O. Fabrichnaya, M. Zinkevich, W. Loeser, J. Werner, R. Nowak, I. Kaban, O. Shuleshova, D. Holland-Moritz, J. Bednarcik, N. Sobczak, J. Eckert: Experimental and thermodynamic assessment of the Gd-Ti system, CALPHAD: Computer Coupling of Phase Diagramsand Thermochemistry 42 (2013), S. 19-26 URL

D. Mikhailova, A. Thomas, S. Oswald, W. Gruner, N.N. Bramnik, A.A. Tsirlin, D.M. Trots, A. Senyshyn, J. Eckert, H. Ehrenberg: Structural changes in the LiCrMnO4 cathode material during electrochemical Li extraction and insertion, Journal of the Electrochemical Society 160 (2013), S. A3082-A3089 URL

C. Bonatto Minella, I. Lindemann, P. Nolis, A. Kiessling, M. Dolors Barod, M. Klose, L. Giebeler, B. Rellinghaus, J. Eckert, L. Schultz, O. Gutfleisch: NaAlH4 confined in ordered mesoporous carbon, International Journal of Hydrogen Energy 38 (2013), S. 8829-8837 URL

J.D. Moore, D. Klemm, D. Lindackers, S. Grasemann, R. Traeger, J. Eckert, L. Loeber, S. Scudino, M. Katter, A. Barcza, K.P. Skokov, O. Gutfleisch: Selective laser melting of La(Fe,Co,Si)13 geometries for magnetic refrigeration, Journal of Applied Physics 114 (2013) Nr. 4, S. 43907/1-8 URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert: Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals, Applied Physics Letters 103 (2013) Nr. 20, S. 201914/1-5 URL

S. Niyomsoan, P. Gargarella, M. Stoica, M.S. Khoshkoo, U. Kuehn, J. Eckert: Phase formation in rapid solidified Ag-Y alloys, Journal of Applied Physics 113 (2013) Nr. 10, S. 104308/1-9 URL

I.V. Okulov, S. Pauly, U. Kuehn, P. Gargarella, T. Marr, J. Freudenberger, L. Schultz, J. Scharnweber, C.-G. Oertel, W. Skrotzki, J. Eckert: Effect of microstructure on the mechanical properties of as-cast Ti–Nb–Al–Cu–Ni alloys for biomedical application, Materials Science and Engineering C 33 (2013), S. 4795-4801 URL

S. Pauly, L. Loeber, R. Petters, M. Stoica, S. Scudino, U. Kuehn, J. Eckert: Processing metallic glasses by selective laser melting, Materials Today 16 (2013) Nr. 1-2, S. 37-41 URL

K. Pinkert, L. Giebeler, M. Herklotz, S. Oswald, J. Thomas, A. Meier, L. Borchardt, L. Kaskel, H. Ehrenberg, J. Eckert: Functionalised porous nanocomposites: Amultidisciplinary approach to investigate designed structures for supercapacitor applications, Journal of Materials Chemistry A 1 (2013) Nr. 5, S. 4904-4910 URL

J. Romberg, J. Freudenberger, J. Scharnweber, U. Gaitzsch, T. Marr, A. Eschke, U. Kuehn, C.-G. Oertel, I. Okulov, R. Petters, W. Skrotzki, J. Eckert, L. Schultz: Metallographic preparation of Aluminium-Titanium composites, Praktische Metallographie 50 (2013) Nr. 11, S. 739-753

S.A. Rounaghi, H. Eshghi, A.R. Kiani Rashid, J. Vahdati Khaki, M. Samadi Khoshkhoo, S. Scudino, J. Eckert: Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile, Journal of Solid State Chemistry 198 (2013), S. 542-547 URL

M.H. Ruemmeli,  M. Zeng,  S. Melkhanova,  S. Gorantla, A. Bachmatiuk,  L. Fu,  C. Yan,  S. Oswald,  R.G. Mendes,  D. Makarov,  O. Schmidt, J. Eckert: Insights into the early growth of homogeneous single-layer graphene over Ni-Mo binary substrates, Chemistry of Materials 25 (2013), S. 3880-3887 URL

M.H. Ruemmeli,  S. Gorantla, A. Bachmatiuk,  J. Phieler, N. Geissler,  I. Ibrahim,  J. Pang, J. Eckert: On the role of vapor trapping for Chemical Vapor Deposition (CVD) grown graphene over copper, Chemistry of Materials 25 (2013), S. 4861-4866 URL

K. Sakaushi, E. Hosono, G. Nickerl, T. Gemming, H. Zhou, S. Kaskel, J. Eckert: Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device, nature communications 4 (2013), S. 1485/1-7 URL

K. Sakaushi,  J. Thomas,  S. Kaskel, J. Eckert: Aqueous solution process for the synthesis and assembly of nanostructured one-dimensional alpha-MoO3 electrode materials, Chemistry of Materials 25 (2013), S. 2557-2563 URL

B. Schwarz, N. Mattern, O. Shuleshova, J. Eckert: Liquid- liquid demixing and microstructure of CoeCueZr alloys with low Zr content, Intermetallics 32 (2013), S. 250-258 URL

S. Scudino, J.Y. Kim, K.G. Prashanth, M.H. Lee, B.S. Kim, U. Kuehn, J. Eckert: Production of customized hybrid porous structures by powder metallurgy of Ni59Zr20Ti16Si2Sn3 glassy powders, Journal of Materials Research 28 (2013) Nr. 17, S. 2490-2498 URL

A. Seifoddini, M. Stoica, M. Nili-Ahmadabadi, S. Heshmati-Manesh, U. Kuehn, J. Eckert: New (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloys with enhanced glass-forming ability and large compressive strain, Materials Science and Engineering A 560 (2013), S. 575-582 URL

K.K. Song, S. Pauly, Y. Zhang, B.A. Sun, J. He, G.Z. Ma, U. Kuehn, J. Eckert: Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites, Materials Science and Engineering A 559 (2013), S. 711-718 URL

K.K. Song, S. Pauly, B.A. Sun, J. Tan, M. Stoica, U. Kuehn, J. Eckert: Correlation between the microstructures and the deformation mechanisms of CuZr based bulk metallic glass composites, AIP Advances 3 (2013), S. 12116/1-8 URL

K.K. Song, S. Pauly, Z. Wang, U. Kuehn, J. Eckert: Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys, Materials Science and Engineering A 587 (2013), S. 372-380 URL

M. Spindler, B. Uhlig, S.B. Menzel, C. Huck, T. Gemming, J. Eckert: Local temperature determination in power loaded surface acoustic wave structures using Raman spectroscopy, Journal of Applied Physics 114 (2013), S. 164317/1-5 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch: Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system, Journal of Alloys and Compounds 578 (2013), S. 471-480 URL

R. Sueptitz, P. Dunne, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Electrochemical micromachining of passive electrodes, Electrochimica Acta 109 (2013), S. 562-569 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Retarding the corrosion of iron by inhomogeneous magnetic fields, Materials and Corrosion 63 (2013) Nr. online first URL

B.A. Sun, S. Pauly, J. Hu, W.H. Wang, U. Kuehn, J. Eckert: Origin of intermittent plastic flow and instability of shear band sliding in bulk metallic glasses, Physical Review Letters 110 (2013) Nr. 22, S. 225501/1-5 URL

A.H. Taghvaei, M. Stoica, K.G. Prashanth, J. Eckert: Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties, Acta Materialia 61 (2013), S. 6609-6621 URL

A.H. Taghvaei, M. Stoica, F. Mazaleyrat, K.G. Prashanth, M. Samadi Khoshkhoo, K. Janghorban, J. Eckert: Microstructure and magnetic properties of soft magnetic composites based on silicon resin coated Co40Fe22Ta8B30 glassy powders, Intermetallics 43 (2013), S. 1-7 URL

A.M. Taghvaei, M. Stoica, M.S. Khoshkhoo, I. Kaban, J. Bednarcik, P. Jovari, K. Janghorban, J. Eckert: DSC, XRD and TEM characterization of glassy Co40Fe22Ta8B30 alloy with very high thermal stability, Materials Letters 93 (2013), S. 322-325 URL

J. Tan, F.S. Pan, C.J. Li, J.F. Wang, J. Eckert: Effect of Fe on crystallization process of Zr-Co-Al-(Fe) bulk metallic glasses, Materials Science Forum 745-746 (2013), S. 734-739 URL

F. Thoss, L. Giebeler, J. Thomas, S. Oswald, K. Potzger, H. Reuther, H. Ehrenberg, J. Eckert: Amorphous Li-Al-based compounds: A novel approach for designing high performance electrode materials for Li-Ion batteries, Inorganics 1 (2013), S. 14-31 URL

J. Torrens-Serra, P. Bruna, M. Stoica, S. Roth, J. Eckert: Glass forming ability, thermal stability, crystallization and magnetic properties of [(Fe,Co,Ni)0.75Si0.05B0.20]95Nb4Zr1 metallic glasses, Journal of Non-Crystalline Solids 367 (2013), S. 30-36 URL

J. Torrens-Serra, M. Stoica, J. Bednarcik, J. Eckert, S. Kustov: Elastic and anelastic properties close to the curie temperature of Fe-based bulk metallic glass, Applied Physics Letters 102 (2013) Nr. 4, S. 41904/1-4 URL

D. Wadewitz, W. Gruner, M. Herklotz, M. Klose, L. Giebeler, A. Voss, J. Thomas, T. Gemming, J. Eckert, H. Ehrenberg: Investigation of copper-cobalt-oxides as model systems for composite interactions in conversion-type electrodes for Lithium-Ion batteries, Journal of the Electrochemical Society 160 (2013) Nr. 8, S. A1333-A1339 URL

J. Wang, M. Zeng, L. Tan, B. Dai, Y. Deng, M. Ruemmeli, H. Xu, Z. Li, S. Wang, L. Peng, J. Eckert, L. Fu: High-mobility graphene on liquid p-block elements by ultra-low-loss CVD growth, Scientific Reports 3 (2013), S. 2670/1-7 URL

A. Waske, B. Schwarz, N. Mattern, J. Eckert: Magnetocaloric (Fe–B)-based amorphous alloys, Journal of Magnetism and Magnetic Materials 329 (2013), S. 101-104 URL

W. Xu, D.P. Edwards, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: Promoting nano/ultrafine-duplex structure via accelerated alpha precipitation in a beta-type titanium alloy severely deformed by high-pressure torsion, Scripta Materialia 68 (2013) Nr. 1, S. 67-70 URL

Z. Yan, W. Hao, Y. Hu, K. Song, M. Stoica, S. Scudino, J. Eckert: Evidence for viscous flow nature in Zr60Al15Ni25 metallic glass subjected to cold rolling, Applied Physics Letters 103 (2013), S. 21907/1-5 URL

L. Yu, N. Brun, K. Sakaushi, J. Eckert, M.M. Titirici: Hydrothermal nanocasting: Synthesis of hierarchically porous carbon monoliths and their application in lithium–sulfur batteries, Carbon 61 (2013), S. 245-253 URL

Y. Zhang, N. Mattern, J. Eckert: Strong correlation of atomic thermal motion in the first coordination shell of a Cu-Zr metallic glass, Applied Physics Letters 102 (2013) Nr. 8, S. 81901/1-4 URL

K. Zhuravleva, M. Boenisch, K.G. Prashanth, U. Hempel, A. Helth, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert: Production of porous beta-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing, materials 6 (2013), S. 5700-5712 URL

K. Zhuravleva, S. Scudino, M.S. Khoshkhoo, A. Gebert, M. Calin, L. Schultz, J. Eckert: Mechanical alloying of beta- Type Ti-Nb for biomedical applications, Advanced Engineering Materials 15 (2013) Nr. 4, S. 262-268 URL

K. Zhuravleva, A. Chivu, A. Teresiak, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications, Materials Science and Engineering C 33 (2013) Nr. 4, S. 2280-2287 URL

2012

F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert: Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites, Journal of Alloys and Compounds 536 (2012) Nr. Suppl. 1, S. S130-S133 URL

D. Beitelschmidt, S. Scudino, G. K. Prashanth, U. Kuehn, J. Eckert: Mechanical behavior of the cold-rolled Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 metallic glass-quasicrystalline composite, International Journal of Materials Research 103 (2012) Nr. 9, S. 1113-1116 URL

B. Boehme, Y. Liang, F. Thoss, L. Giebeler, H. Ehrenberg, M. Baitinger, J. Eckert, Y. Grin: Lithium in intermetallic clathrates, Zeitschrift fuer anorganische und allgemeine Chemie 638 (2012) Nr. 10, S. 1639 URL

M. Calin, M. Stoica, N. Zheng, X. Wang, S. Scudino, A. Gebert, J. Eckert: Thermal stability and crystallization kinetics of Ti40Zr10Cu34Pd14Sn2 bulk metallic glass, Solid State Phenomena 188 (2012), S. 3-10 URL

A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra, J. Eckert: Effect of particle dispersion on the mechanical behavior of Al-based metal matrix composites reinforced with nanocrystalline Al–Ca intermetallics, Journal of Alloys and Compounds 536 (2012) Nr. Suppl. 1, S. S134-S137 URL

A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing, Materials Letters 79 (2012), S. 145-147 URL

V. Efimova, V. Hoffmann, J. Eckert: Sputter crater formation in the case of microsecond pulsed glow discharge in Grimm-type source. Comparison of direct current and radio frequency modes, Spectrochimica Acta B 76 (2012), S. 181-189 URL

S. Faehler, U.K. Roessler, O. Kastner, J. Eckert, G. Eggeler, H. Emmerich, P. Entel, S. Mueller, E. Quandt, K. Albe: Caloric effects in ferroic materials: New concepts for cooling, Advanced Engineering Materials 14 (2012) Nr. 1-2, S. 10-19 URL

A. Gebert, P.F. Gostin, M. Uhlemann, J. Eckert, L. Schultz: Interactions between mechanically generated defects and corrosion phenomena of Zr-based bulk metallic glasses, Acta Materialia 60 (2012), S. 2300-2309 URL

J.H. Han, N. Mattern, B. Schwarz, S. Gorantla, T. Gemming, J. Eckert: Microstructure and magnetic properties of GdeHfeCoeAl phase separated metallic glasses, Intermetallics 20 (2012), S. 115-122 URL

J.H. Han, N. Mattern, B. Schwarz, D.H. Kim, J. Eckert: Phase separation and magneticproperties in Gd–(Hf,Ti,Y)–Co–Al metallic glasses, Scripta Materialia 67 (2012), S. 149-152 URL

R. Hermann, H. Hermann, M. Calin, B. Buechner, J. Eckert: Elastic constants of single crystalline beta-Ti70Nb30, Scripta Materialia 66 (2012), S. 198-201 URL

H. Hermann, V. Kokotin, J. Eckert: Locally fluctuating cooling rate as possible reason for non-crystalline plasticity in metallic glasses, epl 98 (2012) Nr. 1, S. 16003/1-6 URL

J. Hufenbach, S. Kohlar, U. Kuehn, L. Giebeler, J. Eckert: Microstructural and mechanical characterization of an ultra-high-strength Fe86.7Cr4.4Mo0.6V1.1W2.5C4.7 alloy, Journal of Materials Science 47 (2012) Nr. 1, S. 267-271 URL

J. Hufenbach, L. Giebeler, M. Hoffmann, S. Kohlar, U. Kuehn, T. Gemming, S. Oswald, B. Eigenmann, J. Eckert: Effect of short-term tempering on microstructure and mechanical properties of high-strength FeCrMoVC, Acta Materialia 60 (2012), S. 4468-4476 URL

A. Hynowska, E. Pellicer, J. Fornell, S. Gonzalez, N. van Steenberge, S. Surinach, A. Gebert, M. Calin, J. Eckert, M. Dolors Baro, J. Sort: Nanostructured beta-phase Ti–31.0Fe–9.0Sn and sub-my-structured Ti–39.3Nb–13.3Zr–10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances, Materials Science and Engineering C 32 (2012), S. 2418-2425 URL

F.A. Javid, N. Mattern, S. Pauly, J. Eckert: Effect of cobalt on phase formation, microstructure, and mechanical properties of Cu50xCoxZr50 (x = 2, 5, 10, 20 at. pct) alloys, Metallurgical and Materials Transactions A 43 A (2012), S. 2631-2636 URL

A.M.Jr. Jorge, C. Bolfarini, C.S. Kiminami, J. Eckert, W.J. Botta: RQ 14 - "Rapidly quenched and metastable materials", International Journal of Materials Research 103 (2012) Nr. 9, S. 1

I. Kaban, P. Jovari, R.-P. Wang, B. Luther-Davies, N. Mattern, J. Eckert: Structural investigations of Ge5AsxSe95..x and Ge15AsxSe85.. x glasses using x-ray diffraction and extended x-ray fine structure spectroscopy, Journal of Physics: Condensed Matter 24 (2012), S. 385802/1-10 URL

I. Kaban, M. Koehler, L. Ratke, R. Nowak, N. Sobczak, N. Mattern, J. Eckert, A.L. Greer, S.W. Sohn, D.H. Kim: Phase separation in monotectic alloys as a route for liquid state fabrication of composite materials, Journal of Materials Science 47 (2012) Nr. 24, S. 8360-8366 URL

I. Kaban, R. Nowak, O. Shuleshova, B. Korpala, G. Bruzda, A. Siewiorek, J.H. Han, N. Sobczak, N. Mattern, J. Eckert: Sessile drop study of Gd-Ti monotectic alloys on ceramic substrates: phase transformations, wetting, and reactivity, Journal of Materials Science 47 (2012) Nr. 24, S. 8381-8386 URL

T.E. Kim, J.M. Park, U. Kuehn, J. Eckert, W.T. Kim, D.H. Kim: In situ martensitic phase reinforced Fe-Nb-Ni-Mn ultrafine composite with enhanced mechanical properties, Materials Science and Engineering A 531 (2012), S. 51-54 URL

J.Y. Kim, S. Scudino, U. Kuehn, B.S. Kim, M.H. Lee, J. Eckert: Production and characterization of brass-matrix composites reinforced with Ni59Zr20Ti16Si2Sn3 glassy particles, metals 2 (2012), S. 79-94 URL

V. Kokotin, H. Hermann, J. Eckert: Theoretical approach to local and effective properties of BMG based matrix-inclusion nanocomposites, Intermetallics 30 (2012), S. 40-47 URL

U. Kuehn, J. Hufenbach, H. Wendrock, J. Eckert, W. Hufenbach, K. Kunze: Extrem hohe Energieabsorption durch TRIP-Effekt, Konstruktion (2012) Nr. 9, S. 10-11 URL

J. Kundin, R. Kumar, A. Schlieter, M.A. Choudhary, T. Gemming, B. Kuehn, J. Eckert, H. Emmerich: Phase-field modeling of eutectic Ti-Fe alloy solidification, Computational Materials Science 63 (2012), S. 319-328 URL

M. H. Lee, J. Das, D. J. Sordelet, J. Eckert, A. J. Hurd: Effect of tungsten metal particle sizes on the solubility of molten alloy melt: experimental observation of Gibbs-Thomson effect in anocomposites, Applied Physics Letters 101 (2012), S. 124103/1-5 URL

M.H. Lee, J.Y. Kim, U. Kuehn, J. Eckert: Influence of viscous flow on the deformation behavior of bulk metallic glassy alloys in supercooled liquid region, Intermetallics 30 (2012), S. 72-75 URL

K.R. Lim, W.T. Kim, E.-S. Lee, S.S. Jee, S.Y. Kim, D.H. Kim, A. Gebert, J. Eckert: Oxidation resistance of the supercooled liquid in Cu50Zr50 and Cu46Zr46Al8 metallic glasses, Journal of Materials Research 27 (2012) Nr. 8, S. 1178-1186 URL

Z. Liu, R. Li, G. Liu, K. Song, S. Pauly, T. Zhang, J. Eckert: Pronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment, AIP Advances 2 (2012), S. 3121/1-8 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Irreversible and reversible magnetic entropy change in a Dy-based bulk metallic glass, Intermetallics 30 (2012), S. 76-79 URL

Q. Luo, B. Schwarz, N. Mattern, J. Shen, J. Eckert: Mechanism of the giant irreversible positive magnetic entropy change in a Tb-based bulk metallic glass, Applied Physics Letters 101 (2012) Nr. 6, S. 62411/1-6 URL

N. Mattern, A. Shariq, B. Schwarz, U. Vainio, J. Eckert: Structural and magnetic nanoclusters in Cu50Zr50xGdx (x = 5 at.%) metallic glasses, Acta Materialia 60 (2012), S. 1946-1956 URL

N. Mattern, J.H. Han, M. Zinkevich, O. Shuleshova, I. Kaban, D. Holland-Moritz, J. Gegner, F. Yang, J. Bednarcik, W. Loeser, J. Eckert: Experimental and thermodynamic assessment of the Gd-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 39 (2012), S. 27-32 URL

N. Mattern, M. Stoica, G. Vaughan, J. Eckert: Thermal behaviour of Pd40Cu30Ni10P20 bulk metallic glass, Acta Materialia 60 (2012) Nr. 2, S. 517-524 URL

J.M. Park, D.H. Kim, J. Eckert: Enhanced plasticity of Fe-Nb-B- (Ni, Cu) bulk metallic glasses by controlling the heterogeneity and elastic constants, Journal of Alloys and Compounds 536 (2012) Nr. Supl. 1, S. S70-S73 URL

J.M. Park, J.H. Han, N. Mattern, D.H. Kim, J. Eckert: Designing Zr-Cu-Co-Al bulk metallic glasses with phase separation mediated plasticity, Metallurgical and Materials Transactions A 43A (2012), S. 2598-2603 URL

J.M. Park, T.E. Kim, S.J. Kim, W.T. Kim, U. Kuehn, J. Eckert, D.H. Kim: Improving the mechanical properties of Fe-Nb-(Ni-Mn) dendrite-ultrafine eutectic composites via controlling the primary phase Features, Metallurgical and Materials Transactions A 43 A (2012), S. 2680-2686 URL

J.M. Park, D.H. Kim, J. Eckert: Internal state modulation-mediated plasticity enhancement in monolithic Ti-based bulk metallic glass, Intermetallics 29 (2012), S. 70-74 URL

A. Perumal, M. Froebel, S. Gorantla, T. Gemming, L. Luessem, J. Eckert, K. Leo: Novel approach for alternating current (AC)-driven organic light-emitting devices, Advanced Functional Materials 22 (2012) Nr. 1, S. 210-217 URL

K.G. Prashanth, S. Scudino, M. Samadi Khoshkhoo, K.B. Surreddi, M. Stoica, G. Vaughan, J. Eckert: Structural and mechanical characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 bulk metallic glass, Materials 5 (2012) Nr. 1, S. 1-11 URL

R.T. Qu, J.X. Zhao, M. Stoica, J. Eckert, Z.F. Zhang: Macroscopic tensile plasticity of bulk metallic glass through designed artificial defects, Materials Science and Engineering A 534 (2012), S. 365-373 URL

R.T. Qu, M. Calin, J. Eckert, Z.F. Zhang: Metallic glasses: Notch-insensitive materials, Scripta Materialia 66 (2012), S. 733-736 URL

K. Sakaushi, G. Nickerl, F. M. Wisser, D. Nishio-Hamane, E. Hosono, H. Zhou, S. Kaskel, J. Eckert: An energy storage principle using bipolar porous polymeric frameworks, Angewandte Chemie/ International Edition 51 (2012) Nr. 31, S. 7850-7854 URL

K. Sakaushi, G. Nickerl, F.M. Wisser, D. Nishio-Hamane, E. Hosono, H. Zhou, S. Kaskel, J. Eckert: Ein Energiespeicherprinzip auf Basis bipolarer poroeser Polymernetzwerke, Angewandte Chemie - German Edition 124 (2012) Nr. 31, S. 7972-7976 URL

B. Schwarz, N. Mattern, Q. Luo, J. Eckert: Magnetic properties and magnetocaloric effect of rapidly quenched Gd–Co–Fe–Al alloys, Journal of Magnetism and Magnetic Materials 324 (2012) Nr. 8, S. 1581-1587 URL

A. Seifoddini, M. Nili-Ahmadabadi, S. Heshmati-Manesh, M. Stoica, U. Kuehn, J. Eckert: The effect of microstructural changes induced by annealing on mechanical properties of FeCoCrMoCBY bulk glassy alloy, Advanced Materials Research 488-489 (2012), S. 861-865 URL

O. Shuleshova, W. Loeser, R. Holland-Moritz, D.M. Herlach, J. Eckert: Solidification and melting of high temperature materials: In situ observations by synchrotron radiation, Journal of Materials Science 47 (2012), S. 4497-4513 URL

K. K. Song, P. Gargarella, S. Pauly, G.Z. Ma, U. Kuehn, J. Eckert: Correlation between glass-forming ability, thermal stability, and crystallization kinetics of Cu-Zr-Ag metallic glasses, Journal of Applied Physics 112 (2012), S. 63503/1-11 URL

K.K. Song, S. Pauly, Y. Zhang, R. Li, S. Gorantla, N. Narayanan, U. Kuehn, T. Gemming, J. Eckert: Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites, Acta Materialia 60 (2012) Nr. 17, S. 6000-6012 URL

K.K. Song, S. Pauly, B.A. Suna, Y. Zhang, J. Tan, U. Kuehn, M. Stoica, J. Eckert: Formation of Cu-Zr-Al-Er bulk metallic glass composites with enhanced deformability, Intermetallics 30 (2012), S. 132-138 URL

R. Sueptitz, K. Tschulik, C. Becker, M. Stoica, M. Uhlemann, J. Eckert, A. Gebert: Micropatterning of Fe-based bulk metallic glass surfaces by pulsed electrochemical micromachining, Journal of Materials Research 27 (2012) Nr. 23, S. 3033-3040 URL

B.A. Sun, J. Tan, S. Pauly, U. Kuehn, J. Eckert: Stable fracture of a malleable Zr-based bulk metallic glass, Journal of Applied Physics 112 (2012) Nr. 10, S. 103533/1-6 URL

B.A. Sun, S. Pauly, J. Tan, M. Stoica, W.H. Wang, U. Kuehn, J. Eckert: Serrated flow and stick–slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass, Acta Materialia 60 (2012), S. 4160-4171 URL

A.H. Taghvaei, M. Stoica, M.S. Khoshkhoo, J. Thomas, G. Vaughan, K. Janghorban, J. Eckert: Microstructure and magnetic properties of amorphous/nanocrystalline Co40Fe22Ta8B30 alloy produced by mechanical alloying, Materials Chemistry and Physics 134 (2012), S. 1214-1224 URL

J. Tan, F.S. Pan, Y. Zhang, Z. Wang, M. Stoica, B.A. Sun, U. Kuehn, J. Eckert: Effect of Fe addition on glass forming ability and mechanical properties in Zr–Co–Al–(Fe) bulk metallic glasses, Materials Science and Engineering A 539 (2012), S. 124-127 URL

J. Tan, F.S. Pan, Y. Zhang, B.A. Sun, J. He, N. Zheng, M. Stoica, U. Kuehn, J. Eckert: Formation of Zr-Co-Al bulk metallic glasses with high strength and large plasticity, Intermetallics 31 (2012), S. 282-286 URL

F. Thoss, L. Giebeler, S. Oswald, H. Ehrenberg, J. Eckert: Study on the reversible Li-insertion of amorphous and partially crystalline Al86Ni8La6 and Al86Ni8Y6 alloys as anode materials for Li-ion batteries, Electrochimica Acta 60 (2012), S. 85-94 URL

R. Ummethala, V.O. Khavrus, A. Leonhardt, B. Buechner, J. Eckert: A comparative study of various supported catalysts on the growth of aligned carbon nanotube forests on aluminum foils, Chemical Vapor Deposition 18 (2012), S. 326-335 URL

G. Wang, N. Mattern, J. Bednarcik, R. Li, B. Zhang, J. Eckert: Correlation between elastic structural behavior and yield strength of metallic glasses, Acta Materialia 60 (2012) Nr. 6-7, S. 3074-3083 URL

A. Waske, H. Hermann, N. Mattern, K. Skokov, O. Gutfleisch, J. Eckert: Magnetocaloric effect of an Fe-based metallic glass compared to benchmark gadolinium, Journal of Applied Physics 112 (2012) Nr. 12, S. 123918/1-7 URL

W. Xu, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: On the formation of an ultrafine-duplex structure facilitated by severe shear deformation in a Ti-20Mo beta-type titanium alloy, Acta Materialia 60 (2012) Nr. 13-14, S. 5067-5078 URL

Y. Zhang, N. Mattern, J. Eckert: Understanding the relationship between atomic structures and transport properties in (Cu0.5Zr0.5)100.xAlx (<10) glass forming liquids: Molecular dynamics simulations, Journal of Alloys and Compounds 514 (2012), S. 141-149 URL

Y. Zhang, N. Mattern, J. Eckert: Study of structural anisotropy in Cu50Zr45Al5 metallic glass under uniaxial compression by molecular dynamics simulations, Intermetallics 30 (2012), S. 154-157 URL

Y. Zhang, N. Mattern, T.X. Liang, Q. Huang, J. Eckert: Atomic packing and short to medium range order in a U-Fe metallic glass, Applied Physics Letters 101 (2012) Nr. 2, S. 21909/1-4 URL

N. Zheng, R.T. Qu, S. Pauly, M. Calin, T. Gemming, Z.F. Zhang, J. Eckert: Design of ductile bulk metallic glasses by adding “soft” atoms, Applied Physics Letters 100 (2012) Nr. 14, S. 141901/1-4 URL

L.-F. Zhu, M. Friak, A. Dick, B. Grabowski, T. Hickel, F. Liot, D. Hole, A. Schlieter, U. Kuehn, J. Eckert, Z. Ebrahimi, H. Emmerich, J. Neugebauer: First-principles study of the thermodynamic and elastic properties of eutectic Fe–Ti alloys, Acta Materialia 60 (2012), S. 1594-1602 URL

2011

G.A. Almyras, D.G. Papageorgiou, C.E. Lekka, N. Mattern, J. Eckert, G.A. Evangelakis: Atomic cluster arrangements in Reverse Monte Carlo and molecular dynamics structural models of binary CueZr metallic glasses, Intermetallics 19 (2011) Nr. 5, S. 657-661 URL

A.A. Antonysamy, S. Pauly, B.K. Dhindaw, J. Eckert: Influence of superheat on microstructure and mechanical properties of ductile Cu47.5Zr47.5Al5 bulk metallic glass-matrix composite, Journal of Materials Engineering and Performance 20 (2011) Nr. 7, S. 1196-1205 URL

H. Bahmanpour, A. Kauffmann, M.S. Khoshkhoo, K.M. Youssef, S. Mula, J. Freudenberger, J. Eckert, R.O. Scattergood, C.C. Koch: Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys, Materials Science and Engineering A 529 (2011), S. 230-236 URL

N. Barekar, P. Gargarella, K. Song, S. Pauly, U. Kuehn, J. Eckert: Effect of Al and Ag addition on phase formation, thermal stability, and mechanical properties of Cu–Zr-based bulk metallic glasses, Journal of Materials Research 26 (2011) Nr. 14, S. 1702-1710 URL

A. Castellero, T.A. Baser, J. Das, P. Matteis, J. Eckert, L. Battezzati, M. Baricco: Role of crystalline precipitates on the mechanical properties of (Cu0.50Zr0.50)100-xAlx (x = 4, 5, 7) bulk metallic glasses, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S99-S104 URL

G.S. Dmytriv, V.V. Pavlyuk, H. Pauly, J. Eckert, H. Ehrenberg: New real ternary and pseudoternary phases in the Li-Au-Insystem, Journal of Solid State Chemistry 184 (2011) Nr. 5, S. 1328-1332 URL

V. Efimova, V. Hoffmann, J. Eckert: Electrical properties of the my-s pulsed glow discharge in a Grimm-type source: comparison of dc and rf modes, Journal of Analytical Atomic Spectrometry 26 (2011), S. 784-791 URL

M. Friak, T. Hickel, B. Grabowski, L. Lymperakis, A. Udyansky, A. Dick, D. Ma, F. Roters, L.-F. Zhu, A. Schlieter, U. Kuehn, Z. Ebrahimi, R.A. Lebensohn, D. Holec, J. Eckert, H. Emmerich, D. Raabe, J. Neugebauer: Methodological challenges in combining quantum-mechanical and continuum approaches for materials science applications, The European Physical Journal Plus 126 (2011), S. 101/1-23 URL

W. Gang, N. Mattern, J. Bednarci, L. Xia, Q. Zhai, Y. Dong, J. Eckert: Deformation induced structural evolution in bulk metallic glasses, Chinese Science Bulletin- Special Issue, Bulk Metallic Glasses 56 (2011), S. 3952-3959 URL

P. Gargarella, M.F. de Oliveira, C.S. Kiminami, S. Pauly, U. Kuehn, C. Bolfarini, W.J. Botta, J. Eckert: Prediction of good glass formers in the Al-Ni-La and Al-Ni-Gd systems using topological instability and electronegativity, Journal of Applied Physics 109 (2011) Nr. 9, S. 93509/1-7 URL

P. Gargarella, M.F. de Oliveira, C.S. Kiminami, S. Pauly, U. Kuehn, C. Bolfarini, W.J. Botta, J. Eckert: Predicting glass-forming compositions in the Al–La and Al–La–Ni systems, Journal of Alloys and Compounds 509S (2011) Nr. Suppl. 1, S. S170-S174 URL

J. Gluch, T. Roessler, S.B. Menzel, J. Eckert: Microstructure and stress in High-k Hf-Y-O thin films, Microelectronic Engineering 88 (2011), S. 561-563 URL

R.V. Gudavarthy, S. Gorantla, G. Mu, E.A. Kulp, T. Gemming, J. Eckert, J.A. Switzer: Epitaxial electrodeposition of Fe3O4 on single-crystal Ni(111), Chemistry of Materials 23 (2011), S. 2017-2019 URL

J.H. Han, N. Mattern, D.H. Kim, J. Eckert: Phase separation and microstructure evolution of rapidly quenched Gd–Hf–Co–Al alloys, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S42-S45 URL

J. He, H. Jiang, J. Zhao, N. Mattern, J. Eckert: AlNiYCo amorphous matrix composites induced by bismuth and lead additions, Metallurgical and Materials Transactions A 42 (2011) Nr. 13, S. 4100-4105 URL

J. Hufenbach, U. Kuehn, L. Krueger, H. Wendrock, J. Eckert: Transformation-induced plasticity in rapidly solidified Fe88.9Cr4.3V2.2C4.6, Steel Research International 82 (2011) Nr. 1, S. 51-55 URL

F.A. Javid, N. Mattern, S. Pauly, J. Eckert: Martensitic transformation and thermal cycling effect in Cu-Co-Zr alloys, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S334-S337 URL

I. Kaban, P. Jovari, T. Wagner, M. Bartos, M. Frumar, B. Beuneu, W. Hoyer, N. Mattern, J. Eckert: Structural study of AsS2-Ag glasses over a wide concentration range, Journal of Non-Crystalline Solids 357 (2011) Nr. 19-20, S. 3430-3434 URL

I. Kaban, M. Koehler, L. Ratke, W. Hoyer, N. Mattern, J. Eckert, A.L. Greer: Interfacial tension, wetting and nucleation in Al–Bi and Al–Pb monotectic alloys, Acta Materialia 59 (2011), S. 6880-6889 URL

T. Karan, S. Ram, M. Stoica, J. Eckert: Effect of copper additives on irreversible melting in [{(Fe0.5Co0.5)0.75B0.2Si0.05}96Nb4]100-xCux, x 3 alloys, International Journal of Nanoscience 10 (2011) Nr. 4, S. 1013-1017 URL

A. Kauffmann, S. Yin, J. Freudenberger, L. Schultz, M.S. Khoshkhoo, H. Wendrock, J. Eckert, W. Schillinger, V. Subramanya Sarma, H. Bahmanpour, R. Scattergood, C.C. Koch: Zwillingsbildung durch Kryoumformung, Metall-Forschung 65 (2011) Nr. 11, S. 501-503

A. Kauffmann, J. Freudenberger, D. Geissler, S. Yin, W. Schillinger, V. Subramanya Sarma, H. Bahmanpour, R. Scattergood, M.S. Khoshkhoo, H. Wendrock, C.C. Koch, J. Eckert, L. Schultz: Severe deformation twinning in pure copper by cryogenic wire drawing, Acta Materialia 59 (2011) Nr. 20, S. 7816-7823 URL

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert: Grain and crystallite size evaluation of cryomilled pure copper, Journal of Alloys and Compounds 509 (2011) Nr. Supplement 1, S. S343-S347 URL

K.T. Kim, J. Eckert, G. Liu, J.M. Park, B.K. Lim, S.H. Hong: Influence of embedded-carbon nanotubes on the thermal properties of copper matrix nanocomposites processed by molecular-level mixing, Scripta Materialia 64 (2011) Nr. 2, S. 181-184 URL

S.Y. Kim, S.S. Jee, K.R. Lim, W.T. Kim, D.H. Kim, E.-S. Lee, Y.H. Kim, S.M. Lee, J.H. Lee, J. Eckert: Replacement of oxide glass with metallic glass for Ag screen printing metallization on Si emitter, Applied Physics Letters 98 (2011) Nr. 22, S. 222112/1-3 URL

K.T. Kim, G.H. Ha, J. Eckert: Microstructures and magnetic properties of carbon nanotube/Co-oxide nanocomposite powders, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S412-S415 URL

V. Kokotin, H. Hermann, J. Eckert: Computer simulation of the matrix-inclusion interphase in bulk metallic glass based nanocomposites, Journal of Physics/ Condensed Matter 23 (2011) Nr. 42, S. 425403/1-7 URL

G. Liu, S. Scudino, R. Li, U. Kuehn, J. Sun, J. Eckert: Coupling effect of primary voids and secondary voids on the ductile fracture of heat-treatable aluminum alloys, Mechanics of Materials 43 (2011) Nr. 10, S. 556-566 URL

M. Loeffler, U. Weissker, T. Muehl, T. Gemming, J. Eckert, B. Buechner: Current-induced mass transport in filled multiwalled carbon nanotubes, Advanced Materials 23 (2011) Nr. 4, S. 541-544 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Magnetic ordering and slow dynamics in a Ho-based bulk metallic glass with moderate random magnetic anisotropy, Journal of Applied Physics 109 (2011) Nr. 11, S. 113904/1-3 URL

T. Marr, J. Freudenberger, D. Seifert, H. Klauss, J. Romberg, I. Okulov, J. Scharnweber, A. Eschke, C.-G. Oertel, W. Skrotzki, U. Kuehn, J. Eckert, L. Schultz: Ti-Al composite wires with high specific strength, Metals 1 (2011) Nr. 1, S. 79-97 URL

N. Mattern, U. Vainio, J.M. Park, J.H. Han, A. Shariq, D.H. Kim, J. Eckert: Phase separation in Cu46Zr47-xAl7Gdx metallic glasses, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S23-S26 URL

N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, T.P. Yadav, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert: Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling, Philosophical Magazine 91 (2011) Nr. 19-21, S. 2482-2490 URL

J.M. Park, D.H. Kim, M. Stoica, N. Mattern, R. Li, J. Eckert: The influence of in situ formed precipitates on the plasticity of Fe-Nb-B-Cu bulk metallic glasses, Journal of Materials Research 26 (2011) Nr. 16, S. 2080-2086 URL

J.M. Park, G. Wang, S. Pauly, N. Mattern, D.H. Kim, J. Eckert: Ductile Ti-based bulk metallic glasses with high specific strength, Metallurgical and Materials Transactions A 42 (2011) Nr. 6, S. 1456-1460 URL

J.M. Park, D.H. Kim, K.B. Kim, N. Mattern, J. Eckert: Evolution of constitution, structure, and mechanical properties in Fe–Ti–Zr–B heterogeneous multiphase composites, Journal of Materials Research 26 (2011), S. 365-371 URL

J.M. Park, D.H. Kim, N. Mattern, K.B. Kim, E. Fleury, J. Eckert: Microstructure and mechanical properties of Fe–Si–Ti–(Cu, Al) heterostructured ultrafine composites, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S367-S370 URL

G. Parzych, D. Mikhailova, S. Oswald, J. Eckert, H. Ehrenberg: Study of the conversion reaction mechanism for copper borate as electrode material in lithium-ion batteries, Journal of the Electrochemical Society 158 (2011) Nr. 8, S. A898-A904 URL

K.G. Prashanth, S. Kumar, S. Scudino, B.S. Murty, J. Eckert: Fabrication and response of Al70Y16Ni10Co4 glass reinforced metal matrix composites, Materials and Manufacturing Processes 26 (2011) Nr. 10, S. 1242-1247 URL

R.T. Qu, J. Eckert, Z.F. Zhang: Tensile fracture criterion of metallic glass, Journal of Applied Physics 109 (2011) Nr. 8, S. 83544/1-12 URL

J.L. Ren, C. Chen, G. Wang, N. Mattern, J. Eckert: Dynamics of serrated flow in a bulk metallic glass, AIP Advances 1 (2011) Nr. 3, S. 32158/1-6 URL

A. Schlieter, U. Kuehn, J. Eckert, W. Loeser, T. Gemming, M. Friak, J. Neugebauer: Anisotropic mechanical behavior of ultrafine eutectic TiFe cast under non-equilibrium conditions, Intermetallics 19 (2011), S. 327-335 URL

B. Schwarz, U. Vainio, N. Mattern, S.W. Sohn, S. Oswald, D.H. Kim, J. Eckert: Combined in-situ SAXS/WAXS and HRTEM study on crystallization of (Cu60Co40)1-xZrx metallic glasses, Journal of Non-Crystalline Solids 357 (2011) Nr. 6, S. 1538-1546 URL

B. Schwarz, N. Mattern, J.D. Moore, K.P. Skokov, O. Gutfleisch, J. Eckert: Influence of sample geometry on determination of magnetocaloric effect for Gd60Co30Al10 glassy ribbons using direct and indirect methods, Journal of Magnetism and Magnetic Materials 323 (2011) Nr. 13, S. 1782-1786 URL

S. Scudino, B. Jerliu, S. Pauly, K.B. Surreddi, U. Kuehn, J. Eckert: Ductile bulk metallic glasses produced through designed heterogeneities, Scripta Materialia 65 (2011) Nr. 9, S. 815-818 URL

S. Scudino, B. Jerliu, K.B. Surreddi, U. Kuehn, J. Eckert: Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass, Journal of Alloys and Compounds 509 (2011) Nr. Supplement 1, S. S128-S130 URL

A.P. Shpak, A.G. Ilinskii, A.V. Marunyak, O.I. Slukhovskyy, Y.V. Lepeeva, A. Dekhtyar, I. Kaban, N. Mattern, J. Eckert: Crystallization of Fe82Si2B16 and Fe82Si4B14 metallic glasses upon isothermal and non-isothermal annealing, EPJ Web of Conferences 15 (2011), S. 1008/1-4 URL

K.K. Song, S. Pauly, Y. Zhang, S. Scudino, P. Gargarella, K.B. Surreddi, U. Kuehn, J. Eckert: Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass, Intermetallics 19 (2011), S. 1394-1398 URL

K.K. Song, S. Pauly, Y. Zhang, P. Gargarella, R. Li, N.S. Barekar, U. Kuehn, M. Stoica, J. Eckert: Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys, Acta Materialia 59 (2011), S. 6620-6630 URL

M. Stoica, A. Bardos, S. Roth, L.K. Varga, L. Schultz, A. Lovas, J. Eckert: Improved synthesis of bulk metallic glasses by current-assisted copper mold casting, Advanced Engineering Materials 13 (2011) Nr. 1-2, S. 38-42 URL

M. Stoica, R. Li, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: [(Fe0.5Co0.5)0.75B0.20Si0.05]96Nb4 metallic glasses with small Cu additions, Metallurgical and Materials Transactions A 42 (2011) Nr. 6, S. 1476-1480 URL

M. Stoica, V. Kolesar, J. Bednarcic, S. Roth, H. Franz, J. Eckert: Thermal stability and magnetic properties of partially Co-substituted (Fe71.2B24Y4.8)96Nb4 bulk metallic glasses, Journal of Applied Physics 109 (2011) Nr. 5, S. 54901/1-6 URL

H.J. Su, J. Zhang, L. Liu, J. Eckert, H.Z. Fu: Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming, Applied Physics Letters 99 (2011) Nr. 22, S. 221913/1-3 URL

J. Tan, Y. Zhang, M. Stoica, U. Kuehn, N. Mattern, F.S. Pan, J. Eckert: Study of mechanical property and crystallization of a ZrCoAl bulk metallic glass, Intermetallics 19 (2011) Nr. 4, S. 567-571 URL

J. Tan, Y. Zhang, B.A. Sun, M. Stoica, C.J. Li, K.K., Kuehn, U. Song, F.S. Pan, J. Eckert: Correlation between internal states and plasticity in bulk metallic glass, Applied Physics Letters 98 (2011) Nr. 15, S. 151906/1-3 URL

J. Torrens-Serra, S. Venkataraman, M. Stoica, U. Kuehn, S. Roth, J. Eckert: Non-isothermal kinetic analysis of the crystallization of metallic glasses using the master curve method, Materials 4 (2011), S. 2231-2243 URL

L. Wondraczek, J.C. Mauro, J. Eckert, U. Kuehn, J. Horbach, J. Deubener, T. Rouxel: Towards ultrastrong glasses, Advanced Materials 23 (2011) Nr. 39, S. 4578-4586 URL

W. Xu, R.B. Figueiredo, X. Wu, S. Pauly, M. Stoica, J. Eckert, T.G. Langdon, K. Xia: Intrinsically ductile failure in a nanocrystalline beta titanium alloy, Advanced Engineering Materials 13 (2011) Nr. 12, S. 1108-1113 URL

Y. Zhang, N. Mattern, J. Eckert: Atomic structure and transport properties of Cu50Zr45Al5 metallic liquids and glasses: Molecular dynamics simulations, Journal of Applied Physics 110 (2011) Nr. 9, S. 93506/1-8 URL

L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao, T.B. Sercombe: Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy, Scripta Materialia 65 (2011) Nr. 1, S. 21-24 URL

Y. Zhang, N. Mattern, J. Eckert: Effect of uniaxial loading on the structural anisotropy and the dynamics of atoms of Cu50Zr50 metallic glasses within the elastic regime studied by molecular dynamics simulation, Acta Materialia 59 (2011), S. 4303-4313 URL

Y. Zhang, N. Mattern, J. Eckert: Molecular dynamic simulation study of the structural anisotropy in Cu50Zr50 and Cu64.5Zr35.5 metallic glasses induced by static uniaxial loading within the elastic regime, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S74-S77 URL

2010

N.S. Barekar, S. Pauly, R.B. Kumar, U. Kuehn, B.K. Dhindaw, J. Eckert: Structure–property relations in bulk metallic Cu–Zr–Al alloys, Materials Science and Engineering A 527 (2010) Nr. 21-22, S. 5867-5872 URL

F. Boerrnert, S. Gorantla, A. Bachmatiuk, J.H. Warner, I. Ibrahim, J. Thomas, T. Gemming, J. Eckert, G. Cuniberti, B. Buechner, M.H. Ruemmeli: In situ observations of self-repairing single-walled carbon nanotubes, Physical Review B 81 (2010) Nr. 20, S. 201401(R)/1-4 URL

M. Calin, J. Das, K.B. Kim, S. Pauly, N. Mattern, J. Eckert: Enhanced work hardening of Cu-based bulk metallic glass composites by in-situ formed nano-scale heterogeneities, Materials Science Forum 633-634 (2010), S. 665-673 URL

I. Chumak, V. Pavlyuk, G. Dmytriv, S. Oswald, J. Eckert, H. Trill, H. Eckert, H. Pauly, H. Ehrenberg: Li(Al1-zZnz) alloys as anode materials for rechargeable Li-ion batteries, Journal of Materials Research 25 (2010) Nr. 8, S. 1492-1499 URL

J.W. Cui, R.T. Qua, F.F. Wu, Z.F. Zhang, B.L. Shen, M. Stoica, J. Eckert: Shear band evolution during large plastic deformation of brittle and ductile metallic glasses, Philosophical Magazine Letters 90 (2010), S. 573-579 URL

J. Das, R. Theissmann, W. Loeser, J. Eckert: Effect of Sn on microstructure and mechanical properties of Ti-Fe-(Sn) ultrafine eutectic composites, Journal of Materials Research 25 (2010) Nr. 5, S. 943-956 URL

V. Efimova, A. Derzsi, A. Zlotorowicz, V. Hoffmann, Z. Donko, J. Eckert: Influence of the anode material on the characteristics of an analytical glow discharge cell, Spectrochimica Acta, Part B 65 (2010) Nr. 4, S. 311-315 URL

A. Gebert, A. Concustell, A.L. Greer, L. Schultz, J. Eckert: Effect of shot-peening on the corrosion resistance of a Zr-based bulk metallic glass, Scripta Materialia 62 (2010) Nr. 9, S. 635-638 URL

J. Gluch, T. Roessler, D. Schmidt, S.B. Menzel, M. Albert, J. Eckert: TEM characterization of ALD layers in deep trenches using a dedicated FIB lamellae preparation method, Thin Solid Films 518 (2010), S. 4553-4555 URL

S. Gorantla, F. Boerrnert, A. Bachmatiuk, M. Dimitrakopoulou, R. Schoenfelder, F. Schaeffel, J. Thomas, T. Gemming, E. Borowiak-Palen, J.H. Warner, B.I. Yakobson, J. Eckert, B. Buechner, M.H. Ruemmeli: In situ observations of fullerene fusion and ejection in carbon nanotubes, Nanoscale 2 (2010) Nr. 10, S. 2077-2079 URL

S. Gorantla, S. Avdoshenko, F. Boerrnert, A. Bachmatiuk, M. Dimitrakopoulou, F. Schaeffel, R. Schoenfelder, J. Thomas, T. Gemming, J.H. Warner, G. Cuniberti, J. Eckert, B. Buechner, M.H. Ruemmeli: Enhanced pi-pi interactions between a C60 fullerene and a buckle bend on a double-walled carbon nanotube, Nano Research 3 (2010) Nr. 2, S. 92-97 URL

I. Kaban, P. Jovari, M. Stoica, N. Mattern, J. Eckert, W. Hoyer, B. Beuneu: On the atomic structure of Zr60Cu20Fe20 metallic glass, Journal of Physics: Condensed Matter 22 (2010) Nr. 40, S. 404208/1-5 URL

T.E. Kim, J.M. Park, S.W. Sohn, D.H. Kim, W.T. Kim, M. Stoica, U. Kuehn, J. Eckert: Effect of carbon addition on the microstructural evolution and mechanical properties in hypo-eutectic Fe-Zr(-Nb) alloys, Materials Transactions 51 (2010) Nr. 4, S. 799-802

U. Kuehn, J. Romberg, N. Mattern, H. Wendrock, J. Eckert: Transformation-induced plasticity in Fe-Cr-V-C, Journal of Materials Research 25 (2010) Nr. 2, S. 368-374 URL

M.H. Lee, K.T. Kim, T. Gemming, D.J. Sordelet, J. Eckert: Enhanced gas adsorption property of hybrid nanopore-structured copper oxide synthesized from the carbon nanotube/copper composites, Journal of Applied Physics 108 (2010) Nr. 6, S. 64303/1-6 URL

M.H. Lee, J. Das, K.S. Lee, U. Kuehn, J. Eckert: Effect of prestraining on the deformation and fracture behavior of Zr44Ti11Cu9.8Ni10.2Be25, Intermetallics 18 (2010) Nr. 10, S. 1902-1907 URL

M.H. Lee, J.K. Lee, K.B. Kim, D.J. Sordelet, J. Eckert, J.C. Bae: Mechanical behavior of metallic glass reinforced nanostructured tungsten composites synthesized by spark plasma sintering, Intermetallics 18 (2010) Nr. 10, S. 2009-2013 URL

M.H. Lee, K.S. Lee, J. Das, J. Thomas, U. Kuehn, J. Eckert: Improved plasticity of bulk metallic glasses upon cold rolling, Scripta Materialia 62 (2010) Nr. 9, S. 678-681 URL

R. Li, G. Liu, M. Stoica, J. Eckert: FeCo-based multiphase composites with high strength and large plastic deformation, Intermetallics 18 (2010) Nr. 1, S. 134-139 URL

R. Li, S. Pang, M. Stoica, J.M. Park, U. Kuehn, T. Zhang, J. Eckert: Mechanical properties of rapidly solidified Fe–Al–B ternary alloys, Journal of Alloys and Compounds 504 (2010) Nr. Suppl. 1, S. S472-S475 URL

R. Li, M. Stoica, G. Liu, J. Eckert: Evolution of constitution, structure and morphology in FeCo-based multicomponent alloys, Metallurgical and Materials Transactions A 41 (2010) Nr. 7, S. 1640-1645 URL

R. Li, M. Stoica, G. Wang, J.M. Park, Y. Li, T. Zhang, J. Eckert: Glass formation, thermal properties, and elastic constants of La-Al-Co alloys, Journal of Materials Research 25 (2010) Nr. 7, S. 1398-1404 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Giant irreversible positive to large reversible negative magnetic entropy change evolution in Tb-based bulk metallic glass, Physical Review B 82 (2010) Nr. 2, S. 24204/1-6 URL

T. Marr, J. Freudenberger, A. Kauffmann, J. Scharnweber, C.-G. Oertel, W. Skrotzki, U. Siegel, U. Kuehn, J. Eckert, U. Martin, L. Schultz: Damascene light-weight metals, Advanced Engineering Materials 12 (2010) Nr. 12, S. 1191-1197 URL

T. Marr, J. Freudenberger, L. Schultz, J. Scharnweber, C.-G. Oertel, W. Skrotzki, U. Siegel, U. Kuehn, J. Eckert: Damaszen Leichtmetall, Metall 64 (2010) Nr. 4, S. 168-170

N. Mattern, U. Vainio, B. Schwarz, J.M. Park, D.H. Kim, J. Eckert: Phase separation in Ni70Nb30-xYx glasses, Intermetallics 18 (2010), S. 1842-1845 URL

N. Mattern, T. Gemming, J. Thomas, G. Goerigk, H. Franz, J. Eckert: Phase separation in Ni–Nb–Y metallic glasses, Journal of Alloys and Compounds 495 (2010) Nr. 2, S. 299-304 URL

D. Mikhailova, N. Narayanan, A. Voss, H. Ehrenberg, D.M. Trots, C. Ritter, J. Eckert, H. Fuess: Solid solution Sr2Sc1+xRe1–xO6 with a perovskite-like structure: Phase transitions and magnetic properties, European Journal of Inorganic Chemistry (2010) Nr. 8, S. 1196-1206 URL

J.M. Park, D.H. Kim, K.B. Kim, J. Eckert: Improving the plasticity of a high strength Fe–Si–Ti ultrafine composite by introduction of an immiscible element, Applied Physics Letters 97 (2010) Nr. 25, S. 251915/1-3 URL

J.M. Park, K.B. Kim, D.H. Kim, N. Mattern, R. Li, G. Liu, J. Eckert: Multi-phase Al-based ultrafine composite with multi-scale microstructure, Intermetallics 18 (2010) Nr. 10, S. 1829-1833 URL

J.M. Park, J. Jayaraj, D.H. Kim, N. Mattern, G. Wang, J. Eckert: Tailoring of in situ Ti-based bulk glassy matrix composites with high mechanical performance, Intermetallics 18 (2010) Nr. 10, S. 1908-1911 URL

J.M. Park, G. Wang, R. Li, N. Mattern, J. Eckert, D.H. Kim: Enhancement of plastic deformability in Fe–Ni–Nb–B bulk glassy alloys by controlling the Ni-to-Fe concentration ratio, Applied Physics Letters 96 (2010) Nr. 3, S. 31905/1-3 URL

J.M. Park, J.H. Na, D.H. Kim, K.B. Kim, N. Mattern, U. Kuehn, J. Eckert: Medium range ordering and its effect on plasticity of Fe–Mn–B–Y–Nb bulk metallic glass, Philosophical Magazine 90 (2010) Nr. 19, S. 2619-2633 URL

J.M. Park, S. Pauly, N. Mattern, D.H. Kim, K.B. Kim, J. Eckert: Microstructural modulations enhance the mechanical properties in Al-Cu-(Si, Ga) ultrafine composites, Advanced Engineering Materials 12 (2010) Nr. 11, S. 1137-1141 URL

S. Pauly, G. Liu, S. Gorantla, G. Wang, U. Kuehn, D.H. Kim, J. Eckert: Criteria for tensile plasticity in Cu-Zr-Al bulk metallic glasses, Acta Materialia 58 (2010) Nr. 14, S. 4883-4890 URL

S. Pauly, J. Bednarcik, U. Kuehn, J. Eckert: Plastically deformable Cu-Zr intermetallics, Scripta Materialia 63 (2010), S. 336-338 URL

S. Pauly, S. Gorantla, G. Wang, U. Kuehn, J. Eckert: Transformation-mediated ductility in CuZr-based bulk metallic glasses, nature materials 9 (2010), S. 473-477 URL

R.T. Qu, M. Stoica, J. Eckert, Z.F. Zhang: Tensile fracture morphologies of bulk metallic glass, Journal of Applied Physics 108 (2010) Nr. 6, S. 63509/1-9 URL

A. Schlieter, U. Kuehn, J. Eckert, H.-J. Seifert: Microstructure, thermal, and mechanical characterization of rapidly solidified high strength Fe84.3Cr4.3Mo4.6V2.2C4.6, Journal of Materials Research 25 (2010) Nr. 6, S. 1164-1171 URL

B. Schwarz, B. Podmilsak, N. Mattern, J. Eckert: Magnetocaloric effect in Gd-based Gd60FexCo30-xAl10 metallic glasses, Journal of Magnetism and Magnetic Materials 322 (2010) Nr. 16, S. 2298-2303 URL

B. Schwarz, N. Mattern, S. Oswald, J. Eckert: Surface oxidation and magnetic properties of (Cu60Co40)68Zr32 glassy ribbons, Journal of Alloys and Compounds 506 (2010) Nr. 2, S. 520-525 URL

S. Scudino, K.B. Surreddi, G. Wang, J. Eckert: Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints, Scripta Materialia 62 (2010) Nr. 10, S. 750-753 URL

S. Scudino, K.B. Surreddi, J. Eckert: Mechanical properties of cold-rolled Zr60Ti5Ag5Cu12.5Ni10Al7.5 metallic glass, Physica Status Solidi A 207 (2010), S. 1118-1121 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, F. Alia, J. Eckert: Structure and mechanical properties of Al–Mg alloys produced by copper mold casting, Journal of Alloys and Compounds 504 (2010) Nr. Supplement 1, S. S483-S486 URL

S. Scudino, F. Ali, K.B. Surreddi, K.G. Prashanth, M. Sakaliyska, J. Eckert: Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles, Journal of Physics: Conference Series 240 (2010) Nr. 1, S. 12154/1-4 URL

S. Scudino, K.B. Surreddi, M.S. Khoshkhoo, M. Sakaliyska, G. Wang, J. Eckert: Improved room temperature plasticity of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by channel-die compression, Advanced Engineering Materials 12 (2010) Nr. 11, S. 1123-1126 URL

G.A. Song, D.H. Kim, D.H. Kim, M.H. Lee, J.K. Lee, J.M. Park, J. Eckert, Y. Seo, K.B. Kim: Deformation mechanisms of a bimodal eutectic Mg72Cu5Zn23 ultrafine composite, Materials Letters 64 (2010), S. 534-536 URL

M. Spindler, S.B. Menzel, J. Eckert, C. Eggs: Influence of Al on resistance and power durability of Cu- based SAW metallizations, IOP Conference Series: Materials Science and Engineering 8 (2010) Nr. 1, S. 12013/1-5 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch: Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming, Materials Science and Engineering A 527 (2010) Nr. 10-11, S. 2747-2758 URL

M. Stoica, N. Van Steenberge, J. Bednarcik, N. Mattern, H. Franz, J. Eckert: Changes in short-range order of Zr55Cu30Al10Ni5 and Zr55Cu20Al10Ni10Ti5 BMGs upon annealing, Journal of Alloys and Compounds 506 (2010) Nr. 1, S. 85-87 URL

M. Stoica, J. Das, J. Bednarcik, G. Wang, G. Vaughan, W.H. Wang, J. Eckert: Mechanical response of metallic glasses: Insights from in-situ high energy X-ray diffraction, JOM: the Journal of the Minerals, Metals and Materials Society 62 (2010) Nr. 2, S. 76-82

M. Stoica, S. Roth, J. Eckert, T. Karan, S. Ram, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses with Cu additions, Physica Status Solidi C 7 (2010) Nr. 5, S. 1331-1335 URL

M. Stoica, R. Li, A.R. Yavari, G. Vaughan, J. Eckert, N. Van Steenberge, D.R. Romera: Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses, Journal of Alloys and Compounds 504S (2010), S. S123-128 URL

R. Sueptitz, J. Das, S. Baunack, A. Gebert, L. Schultz, J. Eckert: Corrosion and pitting behaviour of ultrafine eutectic Ti–Fe–Sn alloys, Journal of Alloys and Compounds 503 (2010) Nr. 1, S. 19-24 URL

K.B. Surreddi, V.C. Srivastava, S. Scudino, M. Sakaliyska, V. Uhlenwinkel, J.S. Kim, J. Eckert: Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering, Journal of Physics: Conference Series 240 (2010), S. 12155/1-4 URL

K.B. Surreddi, S. Scudino, M. Sakaliyska, K.G. Prashanth, D.J. Sordelet, J. Eckert: Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder, Journal of Alloys and Compounds 491 (2010), S. 137-142 URL

L.C. Zhang, H.B. Lu, M. Calin, E.V. Pereloma, J. Eckert: High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure, Journal of Physics: Conference Series 240 (2010), S. 12103/1-5 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation-induced grain refinement in body-centered cubic Co–Fe alloys upon room temperature compression, Materials Science and Engineering A 527 (2010) Nr. 21-22, S. 5796-5800 URL

N. Zheng, G. Wang, L.C. Zhang, M. Calin, M. Stoica, G. Vaughan, N. Mattern, J. Eckert: In situ high-energy x-ray diffraction observation of structural evolution in a Ti-based bulk metallic glass upon heating, Journal of Materials Research 25 (2010) Nr. 12, S. 2271-2277 URL

2009

M. Baricco, T.A. Baser, J. Das, J. Eckert: Correlation between Poisson ratio and Mohr-Coulomb coefficient in metallic glasses, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 125-131 URL

T.A. Baser, J. Das, J. Eckert, M. Baricco: Glass formation and mechanical properties of (Cu50Zr50)100-xAlx (x = 0, 4, 5, 7) bulk metallic glasses, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 146-149 URL

A. Concustell, J. Sort, J. Fornell, E. Rossinyol, S. Surinach, A. Gebert, J. Eckert, M.D. Baro: Work-hardening mechanisms of the Ti60Cu14Ni12Sn4Nb10 nanocomposite alloy, Journal of Materials Research 24 (2009) Nr. 10, S. 3146-3153 URL

J. Das, S. Pauly, M. Bostroem, K. Durst, M. Goeken, J. Eckert: Designing bulk metallic glass and glass matrix composites in martensitic alloys, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 97-101 URL

J.T. Fan, Z.F. Zhang, S.X. Mao, B.L. Shen, J. Eckert: Serrated flow behavior induced by blunt mechanism of shear crack propagation in metallic glass, Journal of Materials Research 24 (2009) Nr. 2, S. 436-440 URL

N. Ismail, A.A. El-Meligi, M. Uhlemann, A. Gebert, J. Eckert, L. Schultz: Hydrogenation of Zr-Cu-Al-Ni-Pd metallic glasses by electrochemical means, Journal of Alloys and Compounds 480 (2009) Nr. 2, S. 321-324 URL

H.-J. Jun, K.S. Lee, U. Kuehn, J. Eckert, Y.W. Chang: Effect of crystalline phases on deformation and warm formability of a bulk metallic glass composite within supercooled liquid region, Materials Science and Engineering A 525 (2009) Nr. 1-2, S. 62-68 URL

I. Kaban, P. Jovari, M. Stoica, J. Eckert, W. Hoyer, B. Beuneu: Topological and chemical ordering in Co43Fe20Ta5.5B31.5 metallic glass, Physical Review B 79 (2009) Nr. 21, S. 212201/1-4 URL

D. Klemm, V. Hoffmann, K. Wetzig, J. Eckert: DC-and RF-GD-OES measurements of adsorbed organic monolayers on copper, Analytical and Bioanalytical Chemistry 395 (2009) Nr. 6, S. 1893-1900 URL

M.H. Lee, J.K. Lee, K.T. Kim, J. Thomas, J. Das, U. Kuehn, J. Eckert: Deformation-induced microstructural heterogeneity in monolithic Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass, Physica Status Solidi RRL 3 (2009) Nr. 2-3, S. 46-48 URL

K.S. Lee, H.-J. Jun, S. Pauly, B. Bartusch, Y.W. Chang, J. Eckert: Thermomechanical characterization of Cu47.5Zr47.5Al5 bulk metallic glass within the homogeneous flow regime, Intermetallics 17 (2009) Nr. 1, S. 65-71 URL

K.S. Lee, J.-H. Lee, J. Eckert: On the structural relaxation of bulk metallic glass under warm deformation, Intermetallics 17 (2009) Nr. 4, S. 222-226 URL

R. Li, M. Stoica, J. Eckert: Effect of minor Cu addition on phase evolution and magnetic properties of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}100-x Cux alloys, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12042/1-4 URL

R. Li, S. Kumar, S. Ram, M. Stoica, S. Roth, J. Eckert: Crystallization and magnetic properties of [(Fe,Co)0.75Si0.05B0.20]94Nb6 metallic glasses, Journal of Physics D 42 (2009) Nr. 8, S. 85006/1-6 URL

N. Mattern, G. Goerigk, U. Vainio, M.K. Miller, T. Gemming, J. Eckert: Spinodal decomposition of Ni-Nb-Y metallic glasses, Acta Materialia 57 (2009) Nr. 3, S. 903-908 URL

N. Mattern, P. Jovari, I. Kaban, S. Gruner, A. Elsner, V. Kokotin, H. Franz, B. Beuneu, J. Eckert: Short-range order of Cu-Zr metallic glasses, Journal of Alloys and Compounds 485 (2009), S. 163-169 URL

N. Mattern, J. Bednarcik, S. Pauly, G. Wang, J. Das, J. Eckert: Structural evolution of Cu-Zr metallic glasses under tension, Acta Materialia 57 (2009) Nr. 14, S. 4133-4139 URL

K. Nikolowski, S. Scudino, M. Stoica, K.B. Surreddi, J. Das, J. Eckert: Stress-induced martensitic transformation in a Ti45Zr38Al17 cast rod, Journal of Physics: Conference Series 144 (2009), S. 12090/1-4 URL

J.M. Park, N. Mattern, U. Kuehn, J. Eckert, K.B. Kim, W.T. Kim, K. Chattopadhyay, D.H. Kim: High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity, Journal of Materials Research 24 (2009) Nr. 8, S. 2605-2609 URL

J.M. Park, J.H. Han, K.B. Kim, N. Mattern, J. Eckert, D.H. Kim: Favorable microstructural modulation and enhancement of mechanical properties of Ti–Fe–Nb ultrafine composites, Philosophical Magazine Letters 89 (2009) Nr. 10, S. 623-632 URL

S. Pauly, J. Das, N. Mattern, D.H. Kim, J. Eckert: Phase formation and thermal stability in Cu-Zr-Ti(Al) metallic glasses, Intermetallics 17 (2009) Nr. 6, S. 453-462 URL

S. Pauly, J. Das, J. Bednarcik, N. Mattern, K.B. Kim, D.H. Kim, J. Eckert: Deformation-induced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites, Scripta Materialia 60 (2009) Nr. 6, S. 431-434 URL

S. Pauly, G. Liu, G. Wang, J. Das, K.B. Kim, U. Kuehn, D.H. Kim, J. Eckert: Modeling deformation behavior of Cu–Zr–Al bulk metallic glass matrix composites, Applied Physics Letters 95 (2009) Nr. 10, S. 101906/1-3 URL

S. Pauly, G. Liu, G. Wang, U. Kuehn, N. Mattern, J. Eckert: Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites, Acta Materialia 57 (2009) Nr. 18, S. 5445-5453 URL

S. Pauly, M.H. Lee, D.H. Kim, K.B. Kim, D.J. Sordelet, J. Eckert: Crack evolution in bulk metallic glasses, Journal of Applied Physics 106 (2009) Nr. 10, S. 103518/1-7 URL

D.H. Pi, J.K. Lee, M.H. Lee, S. Yi, J. Eckert, K.B. Kim: Role of heterogeneity on deformation behavior of bulk metallic glasses, Journal of Alloys and Compounds 486 (2009), S. 233-236 URL

K.G. Prashanth, S. Scudino, B.S. Murty, J. Eckert: Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders, Journal of Alloys and Compounds 477 (2009) Nr. 1-2, S. 171-177 URL

K.G. Prashanth, S. Scudino, K.B. Surreddi, M. Sakaliyska, B.S. Murty, J. Eckert: Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots, Materials Science and Engineering A 513-514 (2009), S. 279-285 URL

R.-T. Qu, F.-F. Wu, Z.-F. Zhang, J. Eckert: Direct observations on the evolution of shear bands into cracks in metallic glass, Journal of Materials Research 24 (2009) Nr. 10, S. 3130-3135 URL

S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty, J. Eckert: Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy, Acta Materialia 57 (2009) Nr. 6, S. 2029-2039 URL

S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi, J. Eckert: Powder metallurgy of Al-based metal matrix composites reinforced with beta - Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties, Acta Materialia 57 (2009), S. 4529-4538 URL

S. Scudino, P. Donnadieu, K.B. Surreddi, K. Nikolowski, M. Stoica, J. Eckert: Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys, Intermetallics 17 (2009) Nr. 7, S. 532-539 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert: Mechanical alloying and milling of Al-Mg alloys, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 2-7 URL

S. Scudino, S. Venkataraman, M. Stoica, K.B. Surreddi, S. Pauly, J. Das, J. Eckert: Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 227-230 URL

S. Scudino, K.B. Surreddi, H.V. Nguyen, G. Liu, T. Gemming, M. Sakaliyska, J.S. Kim, J. Vierke, M. Wollgarten, J. Eckert: High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders, Journal of Materials Research 24 (2009) Nr. 9, S. 2909-2916 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert: Solid-state processing of Al-Mg alloys, Journal of Physics: Conference Series 144 (2009), S. 12019/1-4 URL

S. Scudino, B. Bartusch, J. Eckert: Viscosity of the supercooled liquid in multi-component Zr-based metallic glasses, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12097/1-4 URL

G.P. Singh, S. Ram, J. Eckert, H.-J. Fecht: Synthesis and morphological stability in CrO2 single crystals of a half-metallic ferromagnetic compound, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12110/1-4 URL

V.C. Srivastava, K.B. Surreddi, V. Uhlenwinkel, A. Schulz, J. Eckert, H.-W. Zoch: Formation of nanocrystalline matrix composite during spray forming of Al83La5Y5Ni5Co2, Metallurgical and Materials Transactions A 40 (2009) Nr. 2, S. 450-461 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, A. Rosenauer, H.-W. Zoch, J. Eckert: Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures, Transactions of The Indian Institute of Metals 62 (2009) Nr. 4-5, S. 331-335 URL

M. Stoica, M. Emmi, S. Ram, A. Wiedenmann, O. Perroud, J. Eckert: Microstructure and magnetic properties of binary Nd80Fe20 with Ga additions, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12103/1-4 URL

M. Stoica, S. Kumar, S. Roth, S. Ram, J. Eckert, G. Vaughan, A.R. Yavari: Crystallization kinetics and magnetic properties of Fe66Nb4B30 bulk metallic glass, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 632-637 URL

K.B. Surreddi, S. Scudino, H.V. Nguyen, K. Nikolowski, M. Stoica, M. Sakaliyska, J.S. Kim, T. Gemming, J. Vierke, M. Wollgarten, J. Eckert: Spark plasma sintering of gas atomized Al87Ni8La5 amorphous powder, Journal of Physics: Conference Series 144 (2009), S. 12079/1-5 URL

A. Teresiak, M. Uhlemann, A. Gebert, J. Thomas, J. Eckert, L. Schultz: Formation of nanostructured LaMg2Ni by rapid quenching and intensive milling and its hydrogen reactivity, Journal of Alloys and Compounds 481 (2009) Nr. 1-2, S. 144-151 URL

G. Wang, N. Mattern, S. Pauly, J. Bednarcik, J. Eckert: Atomic structure evolution in bulk metallic glass under compressive stress, Applied Physics Letters 95 (2009) Nr. 25, S. 251906/1-3 URL

F.F. Wu, Z.F. Zhang, S.X. Mao, J. Eckert: Effect of sample size on ductility of metallic glass, Philosophical Magazine Letters 89 (2009) Nr. 3, S. 178-184 URL

W. Xu, X. Wu, R.B. Figueiredo, M. Stoica, M. Calin, J. Eckert, T.G. Langdon, K. Xia: Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion, International Journal of Materials Research 100 (2009) Nr. 12, S. 1662-1667

W. Xu, X. Wu, M. Calin, M. Stoica, J. Eckert, K. Xia: Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability, Scripta Materialia 60 (2009) Nr. 11, S. 1012-1015 URL

J.X. Zhao, R.T. Qu, F.F. Wu, Z.F. Zhang, B.L. Shen, M. Stoica, J. Eckert: Fracture mechanism of some brittle metallic glasses, Journal of Applied Physics 105 (2009) Nr. 10, S. 103519/1-6 URL

2008

J. Bednarcik, S. Venkataraman, O. Khvostikova, H. Franz, D.J. Sordelet, J. Eckert: Microstructural changes induced by thermal treatment in Cu47Ti33Zr11Ni8Si1 metallic glass, Materials Science and Engineering A 498 (2008) Nr. 1-2, S. 335-340 URL

Y. Das, K.B. Kim, Z.-F. Zhang, G. He, C. Mueller, J. Eckert: Deformation and fracture of Ti-base nanostructured composite, International Journal of Materials Research (Zeitschrift fuer Metallkunde) 99 (2008) Nr. 9, S. 985-990 URL

J. Das, F. Ettingshausen, J. Eckert: Ti-base nanoeutectic-hexagonal structured (D019) dendrite composite, Scripta Materialia 58 (2008) Nr. 8, S. 631-634 URL

C. Duhamel, J. Das, S. Pauly, K.S. Lee, J. Eckert: Deformation behavior and fractographic features of ductile Cu47Zr47Al6 bulk metallic glass, Reviews on Advanced Materials Science 18 (2008) Nr. 5, S. 527-533 URL

J. Eckert, M. Calin, P. Yu, L.C. Zhang, S. Scudino, C. Duhamel: Al-based alloys containing amorphous and nanostructured phases, Reviews on Advanced Materials Science 18 (2008) Nr. 2, S. 169-172 URL

J. Eckert, J. Das, W. Xu, R. Theissmann: Nanoscale mechanism and intrinsic structure related deformation of Ti-alloys, Materials Science and Engineering A 493 (2008) Nr. 1-2, S. 71-78 URL

V.V. Efimova, M.V. Voronov, V. Hoffmann, J. Eckert: Electrical properties of pulsed glow discharge: two new aspects, Publications of the Astronomical Observatory of Belgrade 84 (2008), S. 369-373

B.J. Fan, Z. Zhang, S.X. Mao, J. Eckert: Propagation and deflection of shear bands in metallic glass under circumferential constraint, Advanced Engineering Materials 10 (2008) Nr. 12, S. 1117- URL

J.H. Han, K.B. Kim, S. Yi, J.M. Park, S.W. Sohn, T.E. Kim, D.H. Kim, J. Das, J. Eckert: Formation of a bimodal eutectic structure in Ti–Fe–Sn alloys with enhanced plasticity, Applied Physics Letters 93 (2008) Nr. 14, S. 141901/1-3 URL

J.H. Han, K.B. Kim, S. Yi, J.M. Park, D.H. Kim, S. Pauly, J. Eckert: Influence of a bimodal eutectic structure on the plasticity of a (Ti70.5Fe29.5)91Sn9 ultrafine composite, Applied Physics Letters 93 (2008) Nr. 20, S. 201906/1-3 URL

V. Hoffmann, V.V. Efimova, M.V. Voronov, P. Smid, E.B.M. Steers, J. Eckert: Measurement of voltage and current in continuous and pulsed rf and dc glow discharges, Journal of Physics / Conference Series 133 (2008), S. 12017/1-12 URL

H.-J. Jun, K.S. Lee, J. Eckert, Y.W. Chang: High-temperature deformation behavior and formability of a Zr-Cu-Al-Ni bulk metallic glass, Metallurgical and Materials Transactions A 39 (2008) Nr. 8, S. 1831-1837 URL

K.B. Kim, X.F. Zhang, S. Yi, M.H. Lee, J. Das, J. Eckert: Effect of local chemistry, structure and length scale of heterogeneities on the mechanical properties of a Ti45Cu40Ni7.5Zr5Sn2.5 bulk metallic glass, Philosophical Magazine Letters 88 (2008) Nr. 1, S. 75-81 URL

K.B. Kim, J. Das, M.H. Lee, D.H. Kim, Lee, W.H., J. Eckert: Formation of nano-scale omega-phase in arc-melted micron-scale dendrite reinforced Zr73.5Nb9Cu7Ni1Al9.5 ultrafine composite during heat treatment, Intermetallics 16 (2008) Nr. 4, S. 538-543 URL

K.T. Kim, S.I. Cha, T. Gemming, J. Eckert, S.H. Hong: The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites, Small 4 (2008) Nr. 11, S. 1936-1940 URL

K.T. Kim, J. Eckert, S.B. Menzel, T. Gemming, S.H. Hong: Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites, Applied Physics Letters 92 (2008) Nr. 12, S. 121901/1-3 URL

D. Klemm, M. Stangl, A. Peeva, V. Hoffmann, K. Wetzig, J. Eckert: Analysis of interface impurities in electroplated Cu layers by using GD-OES and TOF-SIMS, Surface and Interface Analysis 40 (2008) Nr. 3-4, S. 418-422 URL

M.H. Lee, K.B. Kim, J.H. Han, J. Eckert, D.J. Sordelet: High strength porous Ti–6Al–4V foams synthesized by solid state powder processing, Journal of Physics / D 41 (2008) Nr. 10, S. 105404/1-5 URL

K.S. Lee, J. Eckert, Y.W. Chang: EXAFS and dilatometric analysis of structural rearrangement after annealing in a Zr-Based bulk metallic glass, Reviews on Advanced Materials Science 18 (2008) Nr. 1, S. 14-17 URL

M.H. Lee, D.H. Bae, D.H. Kim, W.T. Kim, D. J. Sordelet, B.K. Kim, J. Eckert: Nanocrystallization at shear bands in bulk metallic glass matrix composites, Scripta Materialia 58 (2008) Nr. 8, S. 651-654 URL

N. Mattern, A. Schoeps, U. Kuehn, J. Acker, O. Khvostikova, J. Eckert: Structural behavior of CuxZr100-x metallic glass (x = 35-70), Journal of Non-Crystalline Solids 354 (2008) Nr. 10-11, S. 1054-1060 URL

I. Mazilu, A. Teresiak, J. Werner, G. Behr, C.D. Cao, W. Loeser, J. Eckert, L. Schultz: Phase diagram studies on Er2PdSi3 and ErPd2Si2 intermetallic compounds, Journal of Alloys and Compounds 454 (2008) Nr. 1-2, S. 221-227 URL

J.M. Park, D.H. Kim, K.B. Kim, E. Fleury, M.H. Lee, W.T. Kim, J. Eckert: Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni-Ta bulk glassy alloy via introducing the structural inhomogeneity, Journal of Materials Research 23 (2008) Nr. 11, S. 2984-2989 URL

J.M. Park, D.H. Kim, K.B. Kim, M.H. Lee, W.T. Kim, J. Eckert: Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys, Journal of Materials Research 23 (2008) Nr. 7, S. 2003-2008 URL

J.M. Park, S.W. Sohn, D.H. Kim, K.B. Kim, W.T. Kim, J. Eckert: Propagation of shear bands and accommodation of shear strain in the Fe56Nb4Al40 ultrafine eutectic-dendrite composite, Applied Physics Letters 92 (2008) Nr. 9, S. 91910/1-3 URL

J.M. Park, K.B. Kim, W.T. Kim, M.H. Lee, J. Eckert, D.H. Kim: High strength ultrafine eutectic Fe–Nb–Al composites with enhanced plasticity, Intermetallics 16 (2008) Nr. 5, S. 642-650 URL

J.M. Park, T.E. Kim, S.W. Sohn, D.H. Kim, K.B. Kim, W.T. Kim, J. Eckert: High strength Ni–Zr binary ultrafine eutectic-dendrite composite with large plastic deformability, Applied Physics Letters 93 (2008) Nr. 3, S. 31913/1-3 URL

S. Pauly, J. Das, C. Duhamel, J. Eckert: Effect of titanium on microstructure and mechanical properties of Cu50Zr50- x Ti x (2.5 = x = 7.5) glass matrix composites, Metallurgical and Materials Transactions A 39 (2008) Nr. 8, S. 1868-1873 URL

S. Scudino, D.J. Sordelet, J. Eckert: Devitrification of mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders studied by time-resolved X-ray diffraction, Reviews on Advanced Materials Science 18 (2008) Nr. 2, S. 221-224 URL

S. Scudino, S. Sperling, M. Sakaliyska, C. Thomas, M. Feuerbacher, K.B. Kim, H. Ehrenberg, J. Eckert: Phase transformations in mechanically milled and annealed single-phase beta-Al3Mg2, Acta Materialia 56 (2008) Nr. 5, S. 1136-1143 URL

S. Scudino, M. Sakaliyska, M. Stoica, K.B. Surreddi, F. Ali, G. Vaughan, A.R. Yavari, J. Eckert: In-situ X-ray diffraction of mechanically milled - beta-Al3Mg2 powders, Physica Status Solidi - Rapid Research Letters 2 (2008) Nr. 6, S. 272-274 URL

S. Scudino, K.B. Surreddi, S. Sager, M. Sakaliyska, J.S. Kim, W. Loeser, J. Eckert: Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites, Journal of Materials Science 43 (2008) Nr. 13, S. 4518-4526 URL

S. Scudino, S. Venkataraman, M. Sakaliyska, J. Eckert: Crystallization behavior and consolidation of ball milled Zr60Ti5Ag5Cu12.5Ni10Al7.5 glassy powders, Journal of Alloys and Compounds 456 (2008) Nr. 1-2, S. 159-162 URL

S. Scudino, S. Venkataraman, J. Eckert: Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass, Journal of Alloys and Compounds 460 (2008), S. 263-267 URL

J. Sort, N. Van Steenberge, A. Gimazov, A. Concustell, S. Surinach, A. Gebert, J. Eckert, M.D. Baro: Study of the mechanical behaviour of a Zr-based metallic glass rod using micro- and nano-indentation, The Open Materials Science Journal 2 (2008), S. 1-5 URL

M. Spindler, S.B. Menzel, C. Eggs, J. Thomas, T. Gemming, J. Eckert: TEM investigation of Ti and Ti/Al bilayer as alternative diffusion barriers for Cu metallization for SAW device applications, Microelectronic Engineering 85 (2008) Nr. 10, S. 2055-2058 URL

N. Van Steenberge, A. Concustell, J. Sort, J. Das, N. Mattern, A. Gebert, S. Surinach, J. Eckert, M.D. Baro: Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing, Materials Science and Engineering A 491 (2008) Nr. 1-2, S. 124-130 URL

M. Stoica, K. Hajlaoui, J. Das, J. Eckert, A.R. Yavari: FeNbB bulk metallic glass with high boron content, Reviews on Advanced Materials Science 18 (2008) Nr. 1, S. 61-65 URL

M. Stoica, J. Das, J. Bednarcik, H. Franz, N. Mattern, W.H. Wang, J. Eckert: Strain distribution in Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass investigated by in situ tensile tests under synchrotron radiation, Journal of Applied Physics 104 (2008) Nr. 1, S. 13522/1-7 URL

S. Venkataraman, H. Hermann, D.J. Sordelet, J. Eckert: Influence of sub-Tg annealing on the crystallization kinetics of Cu47Ti33Zr11Ni8Si1 metallic glass, Journal of Applied Physics 104 (2008) Nr. 6, S. 66107/1-3 URL

F.-F. Wu, Z.-F. Zhang, B.-L. Shen, S.X.-Y. Mao, J. Eckert: Size effect on shear fracture and fragmentation of a Fe57.6Co14.4B19.2Si4.8Nb4 bulk metallic glass, Advanced Engineering Materials 10 (2008) Nr. 8, S. 727-730 URL

L.C. Zhang, M. Calin, M. Adam, J. Eckert: Crystallization kinetics and viscosity of Cu47Ti33Zr11Ni8X1 (X=Si, Sn) metallic glasses, Reviews on Advanced Materials Science 18 (2008) Nr. 5, S. 429-432 URL

W.Y. Zhang, B. Yang, M. Stoica, J., Shen, B.G. Shen, J. Eckert: Magnetic hardening mechanism of PrCo5-based ribbons with C addition prepared by melt spinning, International Journal of Materials Research (Zeitschrift fuer Metallkunde) 99 (2008) Nr. 1, S. 67-69 URL

W.Y. Zhang, M. Stoica, H.W. Chang, M. Calin, R. Schierholz, W.C. Chang, J. Eckert: The role of nonmagnetic phases in improving the magnetic properties of devitrified Pr2Fe14B-based nanocomposites, Materials Science and Engineering B 149 (2008) Nr. 1, S. 73-76 URL

W.Y. Zhang, M. Stoica, J. Eckert, P. Yu, J.Z. Jiang: Preparation of bulk Nd2Fe14B/Fe3B nanocomposite magnets with high rare earth content, Intermetallics 16 (2008) Nr. 3, S. 341-344 URL

W.Y. Zhang, M. Stoica, J. Eckert, H.W. Chang, W.C. Chang, H. Ehrenberg: The role of combined addition of Ti and B in magnetic hardening of devitrified Pr2Fe14B/(Fe3B,-alpha-Fe) nanocomposite magnets, Physica Status Solidi A 205 (2008) Nr. 5, S. 1207-1210 URL

2007

M. Calin, L.C. Zhang, J. Eckert: Tailoring of microstructure and mechanical properties of a Ti-based bulk metallic glass-forming alloy, Scripta Materialia 57 (2007) Nr. 12, S. 1101-1104 URL

A. Concustell, N. Mattern, H. Wendrock, U. Kuehn, A. Gebert, J. Eckert, A.L. Greer, J. Sort, M.D. Baro: Mechanical properties of a two-phase amorphous Ni–Nb–Y alloy studied by nanoindentation, Scripta Materialia 56 (2007) Nr. 2, S. 85-88 URL

A. Concustell, J. Sort, S. Surinach, A. Gebert, J. Eckert, A.P. Zhilyaev, M.D. Baro: Severe plastic deformation of a Ti-based nanocomposite alloy studied by nanoindentation, Intermetallics 15 (2007) Nr. 8, S. 1038-1045 URL

J. Das, F. Ettingshausen, R. Theissmann, W. Loeser, J. Eckert: Microstructure and mechanical properties of Ti-Fe-(Sn) ultrafine eutectic alloys, Transactions of the Indian Institute of Metals 60 (2007) Nr. 2-3, S. 229-233

J. Das, K.B. Kim, W. Xu, W. Loeser, J. Eckert: Formation of ductile ultrafine eutectic structure in Ti–Fe–Sn alloy, Materials Science and Engineering A 449-451 (2007), S. 737-740 URL

J. Das, S. Pauly, C. Duhamel, B.C. Wei, J. Eckert: Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5, Journal of Materials Research 22 (2007) Nr. 2, S. 326-333 URL

J. Das, K.B. Kim, F. Baier, W. Loeser, A. Gebert, J. Eckert: Bulk ultra-fine eutectic structure in Ti–Fe–base alloys, Journal of Alloys and Compounds 434-435 (2007), S. 28-31 URL

J. Das, M. Bostroem, N. Mattern, A. Kvick, A.R. Yavari, A.L. Greer, J. Eckert: Plasticity in bulk metallic glasses investigated via the strain distribution, Physical Review B 76 (2007) Nr. 9, S. 92203/1-4 URL

J. Eckert, J. Das, S. Pauly, C. Duhamel: Processing routes, microstructure and mechanical properties of metallic glasses and their composites, Advanced Engineering Materials 9 (2007) Nr. 6, S. 443-453 URL

J. Eckert, J. Das, G. He, M. Calin, K.B. Kim: Ti-base bulk nanostructure-dendrite composites: Microstructure and deformation, Materials Science and Engineering A 449-451 (2007), S. 24-29 URL

J. Eckert, C. Duhamel, J. Das, K.B. Kim, Z.F. Zhang: Bulk nanostructure - Dendrite composites. solidification, microstructure and mechanical properties, Transactions of the Indian Institute of Metals 60 (2007) Nr. 2-3, S. 331-338

J. Eckert, J. Das, S. Pauly, C. Duamel, K.B. Kim, S. Yi, W.H. Wang: Impact of microstructural inhomogenities on the ductility of bulk metallic glasses, Materials Transactions 48 (2007) Nr. 7, S. 1806-1811

J. Eckert, J. Das, S. Pauly, C. Duhamel: Mechanical properties of bulk metallic glasses and composites, Journal of Materials Research 22 (2007) Nr. 2, S. 285-301 URL

J. Eckert, J. Das, K.B. Kim, F. Baier, W. Loeser, M. Calin, Z.F. Zhang, A. Gebert: Deformation behavior of a Ti66Cu8Ni4.8Sn7.2Nb14 nanostructured composite containing ductile dendrites, Journal of Alloys and Compounds 434-435 (2007), S. 13-17 URL

J. Eckert, J. Das, W. Loeser, S.K. Roy, A. Gebert: Strengthening of multicomponent glass-forming alloys by microstructure design, Journal of Non-Crystalline Solids 353 (2007) Nr. 32-40, S. 3742-3749 URL

A. Gebert, N. Mattern, U. Kuehn, J. Eckert, L. Schultz: Electrode characteristics of two-phase glass-forming Ni–Nb–Y alloys, Intermetallics 15 (2007) Nr. 9, S. 1183-1189 URL

K.B. Kim, J. Das, F. Baier, J. Eckert: Microstructural investigation of a deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 106-109 URL

K.B. Kim, J. Das, W. Loeser, M.H. Lee, D.H. Kim, S.K. Roy, J. Eckert: Microstructural comparison of Zr73.5Nb9Cu7Ni1Al9.5 nanostructure-dendrite composites produced by different casting techniques, Materials Science and Engineering A 449-451 (2007), S. 747-751 URL

K.B. Kim, P.J. Warren, B. Cantor, J. Eckert: Devitrification of nano-scale icosahedral phase in multicomponent alloys, Materials Science and Engineering A 449-451 (2007), S. 983-986 URL

U. Kuehn, N. Mattern, T. Gemming, U. Siegel, K. Werniewicz, J. Eckert: Superior mechanical properties of FeCrMoVC, Applied Physics Letters 90 (2007) Nr. 26, S. 261901/1-3 URL

K.S. Lee, J. Eckert, H.-J. Jun, Y.W. Chang: Influence of annealing on structural relaxation, crystallization, and deformation behavior of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass, Journal of Materials Research 22 (2007) Nr. 7, S. 1849-1858 URL

K.S. Lee, J. Eckert, Y.W. Chang: Load relaxation behavior of a Zr41.2Ti13.8Cu12.5Ni10 Be22.5 bulk metallic glass, Journal of Non-Crystalline Solids 353 (2007) Nr. 26, S. 2515-2520 URL

K.S. Lee, H.-J. Jun, D.W. Kim, J. Eckert, Y.W. Chang: Structural relaxation and crystallization of a Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass, Materials Transactions 48 (2007) Nr. 7, S. 1722-1728

B. Lorenz, O. Perner, J. Eckert, C.W. Chu: Superconducting gaps of nanocrystalline MgB2, Physica C 460-462 (2007), S. 553-554 URL

N. Mattern, U. Kuehn, J. Eckert: Structural behavior of amorphous and liquid metallic alloys at elevated temperatures, Journal of Non-Crystalline Solids 353 (2007), S. 3327-3331 URL

N. Mattern, U. Kuehn, A. Concustell, A. Schoeps, M.D. Baro, J. Eckert: Phase separation and crystallization in Cu-Zr metallic glasses, Materials Transactions 48 (2007) Nr. 7, S. 1639-1643

N. Mattern, T. Gemming, G. Goerigk, J. Eckert: Phase separation in amorphous Ni–Nb–Y alloys, Scripta Materialia 57 (2007) Nr. 1, S. 29-32 URL

N. Mattern, W. Loeser, J. Eckert: Influence of cooling rate on crystallization and microstructure of the monotectic Ni54Nb23Y23 alloy, Philosophical Magazine Letters 87 (2007) Nr. 11, S. 839-846 URL

S. Pauly, J. Das, C. Duhamel, J. Eckert: Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite, Advanced Engineering Materials 9 (2007) Nr. 6, S. 487-491 URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz: Effect of Zr on the crystallization behavior of multi-component Zr-based metallic glasses, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 217-220 URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz: Influence of oxygen on the devitrification of Zr–Ti–Nb–Cu–Ni–Al metallic glasses, Materials Science and Engineering A 449-451 (2007), S. 493-496 URL

S. Scudino, J. Eckert, X.Y. Yang, D.J. Sordelet, L. Schultz: Conditions for quasicrystal formation from mechanically alloyed Zr-based glassy powders, Intermetallics 15 (2007) Nr. 4, S. 571-582 URL

N. Van Steenberge, J. Sort, A. Concustell, J. Das, S. Scudino, S. Surinach, J. Eckert, M.D. Baro: Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy, Scripta Materialia 56 (2007) Nr. 7, S. 605-608 URL

M. Stoica, J. Eckert, S. Roth, A.R. Yavari, L. Schultz: Fe65.5Cr4Mo4Ga4P12C5B5.5 BMGs: Sample preparation, thermal stability and mechanical properties, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 171-175 URL

S. Venkataraman, J. Eckert, L. Schultz, D.J. Sordelet: Studies on the crystallization kinetics of Cu-reinforced partially crystalline Cu47Ti33Zr11Ni8Si1 metallic glass composite, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 203-206 URL

S. Venkataraman, H. Hermann, C. Mickel, L. Schultz, D.J. Sordelet, J. Eckert: Calorimetric study of the crystallization kinetics of Cu47Ti33Zr11Ni8Si1 metallic glass, Physical Review B 75 (2007) Nr. 10, S. 104206/1-9 URL

S. Venkataraman, B. Bartusch, C. Mickel, K.B. Kim, J. Das, S. Scudino, M. Stoica, D.J. Sordelet, J. Eckert: Metallic glass formation in the Cu47Ti33Zr11Ni8Si1 alloy, Materials Science and Engineering A 444 (2007) Nr. 1-2, S. 257-264 URL

B.C. Wei, L.C. Zhang, T.H. Zhang, D.M. Xing, J. Das, J. Eckert: Strain rate dependence of plastic flow in Ce-based bulk metallic glass during nanoindentation, Journal of Materials Research 22 (2007) Nr. 2, S. 258-263 URL

K. Werniewicz, U. Kuehn, N. Mattern, B. Bartusch, J. Eckert, J. Das, L. Schultz, T. Kulik: New Fe-Cr-Mo-Ga-C composites with high compressive strength and large plasticity, Acta Materialia 55 (2007) Nr. 10, S. 3513-3520 URL

A.R. Yavari, J.J. Lewandowski, J. Eckert: Mechanical properties of bulk metallic glasses, MRS Bulletin 32 (2007) Nr. 8, S. 635-638

P. Yu, L.C. Zhang, W.Y. Zhang, J. Das, K.B. Kim, J. Eckert: Interfacial reaction during the fabrication of Ni60Nb40 metallic glass particles-reinforced Al based MMCs, Materials Science and Engineering A 444 (2007) Nr. 1-2, S. 206-213 URL

P. Yu, S. Venkataraman, J. Das, L. Zhang, W. Zhang, J. Eckert: Effect of high pressure during the fabrication on the thermal and mechanical properties of amorphous Ni60Nb40 particle-reinforced Al-based metal matrix composites, Journal of Materials Research 22 (2007) Nr. 5, S. 1168-1173 URL

W.Y. Zhang, C.H. Chiu, L.C. Zhang, K. Biswas, H. Ehrenberg, W.C. Chang, J. Eckert: Complete suppression of metastable phase and significant enhancement of magnetic properties of B-rich PrFeB nanocomposites prepared by devitrifying amorphous ribbons, Journal of Magnetism and Magnetic Materials 308 (2007), S. 24-27 URL

Z.-F. Zhang, J. Eckert: The physical nature of materials strengths, Advanced Engineering Materials 9 (2007) Nr. 3, S. 143-146 URL

X.F. Zhang, K.B. Kim, J. Das, S. Yi, J. Eckert: Influence of additional elements on the development of nanoscale heterogeneities in (TiCu)-based bulk metallic glasses with enhanced ductility, Journal of Materials Research 22 (2007) Nr. 8, S. 2223-2229 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation behavior and plastic instability of off-stoichiometric Co–Fe alloys, Scripta Materialia 57 (2007) Nr. 8, S. 731-734 URL

L.-C. Zhang, H.-B. Lu, C. Mickel, J. Eckert: Ductile ultrafine-grained Ti-based alloys with high yield strength, Applied Physics Letters 91 (2007) Nr. 5, S. 51906/1-3 URL

L.-C. Zhang, M. Calin, F. Paturaud, C. Mickel, J. Eckert: Deformation-induced nanoscale high-temperature phase separation in Co–Fe alloys at room temperature, Applied Physics Letters 90 (2007) Nr. 20, S. 201908/1-3 URL

L.C. Zhang, M. Calin, M. Branzei, L. Schultz, J. Eckert: Phase stability and consolidation of glassy/nanostructured Al85Ni9Nd4Co2 alloys, Journal of Materials Research 22 (2007) Nr. 5, S. 1145-1155 URL

L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin, J. Eckert: High strength Ti–Fe–Sn ultrafine composites with large plasticity, Scripta Materialia 57 (2007) Nr. 2, S. 101-104 URL

2006

K. Biswas, S. Venkataraman, W.Y. Zhang, S. Ram, J. Eckert: Glass-forming ability and fragility parameter of amorphous Fe67Co9.5Nd3Dy0.5B20, Journal of Applied Physics 100 (2006) Nr. 2, S. 23501/1-5 URL

A. Castellero, S. Bossuyt, M. Stoica, S. Deledda, J. Eckert, G.Z. Chen, D.J. Fray, A.L. Greer: Improvement of the glass-forming ability of Zr55Cu30Al10Ni5 and Cu47Ti34Zr11Ni8 alloys by electro-deoxidation of the melts, Scripta Materialia 55 (2006) Nr. 1, S. 87-90 URL

A. Concustell, J. Sort, T.G. Woodcock, A. Gimazov, S. Surinach, A. Gebert, J. Eckert, A.P. Zhilyaev, M.D. Baro: Enhanced microhardness in nanocomposite Ti60Cu14Ni12Sn4Ta10 processed by high pressure torsion, Intermetallics 14 (2006) Nr. 8-9, S. 871-875 URL

J. Das, K.B. Kim, W. Xu, B.C. Wei, Z.F. Zhang, W.H. Wang, S. Yi, J. Eckert: Ductile metallic glasses in supercooled martensitic alloys, Materials Transactions 47 (2006) Nr. 10, S. 2606-2609

J. Das, J. Eckert, R. Theissmann: Structural short-range order of the BETA-Ti phase in bulk Ti–Fe–(Sn) nanoeutectic composites, Applied Physics Letters 89 (2006) Nr. 26, S. 261917/1-3 URL

S. Dasgupta, J. Das, J. Eckert, I. Manna: Influence of environment and grain size on magnetic properties of nanocrystalline Mn–Zn ferrite, Journal of Magnetism and Magnetic Materials 306 (2006) Nr. 1, S. 9-15 URL

J. Eckert, J. Das, K.B. Kim, F. Baier, M.B. Tang, W.H. Wang, Z.F. Zhang: High strength ductile Cu-base metallic glass, Intermetallics 14 (2006) Nr. 8-9, S. 876-881 URL

K.B. Kim, J. Das, X.D. Wang, X. Zhang, J. Eckert, S. Yi: Effect of Sn on microstructure and mechanical properties of (Ti–Cu)-based bulk metallic glasses, Philosophical Magazine Letters 86 (2006) Nr. 8, S. 479-486 URL

K.B. Kim, J. Das, S. Venkataraman, S. Yi, J. Eckert: Work hardening ability of ductile Ti45Cu40Ni7.5Zr5Sn2.5 and Cu47.5Zr47.5Al5 bulk metallic glasses, Applied Physics Letters 89 (2006) Nr. 7, S. 71908/1-3 URL

K.B. Kim, S. Yi, H. Choi-Yim, J. Das, W. Xu, W.L. Johnson, J. Eckert: Effect of Cu on local amorphization in bulk Ni–Ti–Zr–Si alloys during solidification, Acta Materialia 54 (2006) Nr. 11, S. 3141-3150 URL

K.B. Kim, J. Das, W. Xu, Z.F. Zhang, J. Eckert: Microscopic deformation mechanism of a Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure–dendrite composite, Acta Materialia 54 (2006) Nr. 14, S. 3701-3711 URL

U. Kuehn, K. Eymann, N. Mattern, J. Eckert, A. Gebert, B. Bartusch, L. Schultz: Limited quasicrystal formation in Zr–Ti–Cu–Ni–Al bulk metallic glasses, Acta Materialia 54 (2006) Nr. 18, S. 4685-4692 URL

U. Kuehn, J. Eckert, L. Schultz: Annealing-induced phase transitions in a Zr–Ti–Nb–Cu–Ni–Al bulk metallic glass matrix composite containing quasicrystalline precipitates, Zeitschrift fuer Metallkunde 97 (2006) Nr. 7, S. 996-1000

G. Kumar, P. Kerschl, U.K. Roessler, K. Nenkov, K.-H. Mueller, L. Schultz, J. Eckert: High-field magnetization and coercivity of hard magnetic mold-cast Nd80Fe20, Journal of Applied Physics 99 (2006) Nr. 8, S. 83904/1-8 URL

G. Kumar, O. Filip, W. Loeser, L. Schultz, J. Eckert: Cooling rate controlled microstructure and magnetic properties of metastable Fe20Nd80 alloys, Intermetallics 14 (2006) Nr. 1, S. 47-53 URL

M. Kusy, U. Kuehn, A. Concustell, A. Gebert, J. Das, J. Eckert, L. Schultz, M.D. Baro: Fracture surface morphology of compressed bulk metallic glass-matrix-composites and bulk metallic glass, Intermetallics 14 (2006) Nr. 8-9, S. 982-986 URL

B. Lorenz, O. Perner, J. Eckert, C.W. Chu: Superconducting properties of nanocrystalline MgB2, Superconductor Science and Technology 19 (2006) Nr. 9, S. 912-915 URL

U. Kamachi Mudali, U. Kuehn, J. Eckert, L. Schultz, A. Gebert: Corrosion behaviour of zirconium based bulk metallic glasses, Transactions of the Indian Institute of Metals 59 (2006) Nr. 1, S. 123-138

S. Roth, M. Stoica, J. Degmova, U. Gaitzsch, J. Eckert, L. Schultz: Fe-based bulk amorphous soft magnetic materials, Journal of Magnetism and Magnetic Materials 304 (2006) Nr. 2, S. 192-196 URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz: Influence of ball milling on quasicrystal formation in melt-spun Zr-based glassy ribbons, Philosophical Magazine 86 (2006) Nr. 3-5, S. 367-371 URL

S. Scudino, M. Stoica, N. Mattern, H. Breitzke, K. Lueders, A.R. Yavari, J. Eckert: Is a particular quenched-in short-range order necessary for quasicrystal formation from glassy precursors?, Physica Status Solidi B 243 (2006) Nr. 5, S. R34-R36 URL

S. Scudino, J. Das, M. Stoica, K.B. Kim, M. Kusy, J. Eckert: High strength hexagonal structured dendritic phase reinforced Zr–Ti–Ni bulk alloy with enhanced ductility, Applied Physics Letters 88 (2006) Nr. 20, S. 201920/1-3 URL

N. Van Steenberge, J. Das, A. Concustell, J. Sort, S. Surinach, J. Eckert, M.D. Baro: Influence of annealing on the microstructure and hardness of Ti67.79Fe28.36Sn3.85 nanocomposite rods, Scripta Materialia 55 (2006) Nr. 12, S. 1087-1090 URL

M. Stoica, J. Eckert, S. Roth, L. Schultz, A.R. Yavari: Preparation and characterization of Fe-(Cr,Mo,Ga)-(P,C,B) soft magnetic bulk metallic glasses, Journal of Optoelectronics and Advanced Materials 8 (2006) Nr. 5, S. 1685-1690

S. Venkataraman, S. Scudino, J. Eckert, T. Gemming, C. Mickel, L. Schultz, D.J. Sordelet: Nanocrystallization of gas atomized Cu47Ti33Zr11Ni8Si1 metallic glass, Journal of Materials Research 21 (2006) Nr. 3, S. 597-607 URL

S. Venkataraman, J. Eckert, L. Schultz, D.J. Sordelet: Effect of preannealing on glass transition and crystallization of gas atomized Cu47Ti33Zr11Ni8Si1 metallic glass powders, Intermetallics 14 (2006) Nr. 8-9, S. 1085-1090 URL

S. Venkataraman, K. Biswas, B.C. Wei, D.J. Sordelet, J. Eckert: On the fragility of Cu47Ti33Zr11Ni8Si1 metallic glass, Journal of Physics D: Applied Physics 39 (2006) Nr. 12, S. 2600-2608 URL

S. Venkataraman, W. Loeser, J. Eckert, T. Gemming, C. Mickel, P. Schubert-Bischoff, N. Wanderka, L. Schultz, D.J. Sordelet: Nanocrystal development in Cu47Ti33Zr11Ni8Si1 metallic glass powders, Journal of Alloys and Compounds 415 (2006) Nr. 1-2, S. 162-169 URL

S. Venkataraman, M. Stoica, S. Scudino, T. Gemming, C. Mickel, U. Kunz, K.B. Kim, L. Schultz, J. Eckert: Revisiting the Cu47Ti33Zr11Ni8Si1 glass-forming alloy, Scripta Materialia 54 (2006) Nr. 5, S. 835-840 URL

W. Xu, K.B. Kim, J. Das, M. Calin, J. Eckert: Phase stability and its effect on the deformation behavior of Ti–Nb–Ta–In/Cr beta alloys, Scripta Materialia 54 (2006) Nr. 11, S. 1943-1948 URL

W. Xu, K.B. Kim, J. Das, M. Calin, B. Rellinghaus, J. Eckert: Deformation-induced nanostructuring in a Ti–Nb–Ta–In beta alloy, Applied Physics Letters 89 (2006) Nr. 3, S. 31906/1-3 URL

P. Yu, K.B. Kim, J. Das, F. Baier, W. Xu, J. Eckert: Fabrication and mechanical properties of Ni–Nb metallic glass particle-reinforced Al-based metal matrix composite, Scripta Materialia 54 (2006) Nr. 8, S. 1445-1450 URL

W.Y. Zhang, C.H. Chiu, L.C. Zhang, K. Biswas, H. Ehrenberg, W.C. Chang, J. Eckert: Complete suppression of metastable phase and significant enhancement of magnetic properties of B-rich PrFeB nanocomposites prepared by devitrifying amorphous ribbons, Journal of Magnetism and Magnetic Materials 308 (2006), S. 24-27 URL

Z.F. Zhang, F.F. Wu, W. Gao, J. Tan, Z.G. Wang, M. Stoica, J. Das, J. Eckert, B.L. Shen, A. Inoue: Wavy cleavage fracture of bulk metallic glass, Applied Physics Letters 89 (2006) Nr. 25, S. 251917/1-3 URL

2005

G. Alcala, A. Concustell, S. Mato, T.G. Woodcock, A. Gebert, M.D. Baro, J. Eckert: Mechanical characterization of Cu60Zr22Ti18 bulk metallic glasses, Journal of Metastable and Nanocrystalline Materials 24-25 (2005), S. 669-672

K. Biswas, S. Ram, L. Schultz, J. Eckert: Crystallization kinetics of amorphous Fe67Co9.5Nd3Dy0.5B20, Journal of Alloys and Compounds 397 (2005) Nr. 1-2, S. 104-109 URL

M. Calin, M. Stoica, J. Eckert, A.R. Yavari, L. Schultz: Glass formation and crystallization of Cu47Ti33Zr11Ni8X1 (X = Fe, Si, Sn, Pb) alloys, Materials Science and Engineering A 392 (2005) Nr. 1-2, S. 169-178 URL

A. Concustell, J. Sort, G. Alcala, S. Mato, A. Gebert, J. Eckert, M.D. Baro: Plastic deformation and mechanical softening of Pd40Cu30Ni10P20 bulk metallic glass during nanoindentation, Journal of Materials Research 20 (2005) Nr. 10, S. 2719-2725 URL

A. Concustell, G. Alcala, S. Mato, T.G. Woodcock, A. Gebert, J. Eckert, M.D. Baro: Effect of relaxation and primary nanocrystallization on the mechanical properties of Cu60Zr22Ti18 bulk metallic glass, Intermetallics 13 (2005) Nr. 11, S. 1214-1219 URL

J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, J. Eckert: "Work-Hardenable" ductile bulk metallic glass, Physical Review Letters 94 (2005) Nr. 20, S. 205501/1-4 URL

J. Eckert, J. Das, G. He, W. Loeser, E. Ma, Y. Li, M.L. Sui, T.G. Woodcock, A. Gebert: In situ formed bulk nanostructured Ti-base composites, Journal of Metastable and Nanocrystalline Materials 24-25 (2005), S. 31-36

J. Eckert, J. Das, W. Loeser, U. Kuehn, S.K. Roy: Ductile Zr-base bulk nanostructured composites: present state-of-the-art, Transactions of the Indian Institute of Metals 58 (2005) Nr. 6, S. 1157-1167

S.N. Kane, N.S. Mitrovic, A. Gupta, S. Roth, F. Mazaleyrat, J. Eckert: Influence of Nb addition on structural and magnetic properties of FeNbAlGaPCB metallic glasses, Journal of Magnetism and Magnetic Materials 290-291 (2005) Nr. Part 2, S. 1461-1464 URL

K.B. Kim, J. Das, F. Baier, J. Eckert: Heterogeneous distribution of shear strains in deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure-dendrite composite, Physica Status Solidi A 202 (2005) Nr. 13, S. 2405-2412 URL

Ki Buem Kim, Yi Seonghoon, Haein Choi-Yim, Jayanta Das, W.L. Johnson, J. Eckert: Interfacial instability-driven amorphization/nanocrystallization in a bulk Ni45Cu5Ti33Zr16Si1 alloy during solidification, Physical Review B 72 (2005) Nr. 9, S. 92102/1-4 URL

U. Kuehn, J. Eckert, N. Mattern, L. Schultz: Formation of micrometer sized quasicrystals in slowly cooled Zr-Ti-Nb-Cu-Ni-Al alloys, Physica Status Solidi A 202 (2005) Nr. 13, S. 2436-2441 URL

U. Kuehn, J. Eckert, S. Scudino, A. Gebert, N. Radtke, N. Mattern, L. Schultz: Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al alloys by casting or annealing, Journal of Metastable and Nanocrystalline Materials 24-25 (2005), S. 511-514

S. Mato, G. Alcala, T.G. Woodcock, A. Gebert, J. Eckert, L. Schultz: Corrosion behaviour of a Ti-base nanostructure-dendrite composite, Electrochimica Acta 50 (2005) Nr. 12, S. 2461-2467 URL

I. Mazilu, W. Loeser, G. Behr, J. Werner, J. Eckert, L. Schultz: Element segregation during crystal growth processes of Ce2PdxCo1-xSi3 intermetallic compounds, Journal of Crystal Growth 275 (2005) Nr. 1-2, S. e109-e114 URL

O. Perner, J. Eckert, W. Haessler, C. Fischer, J. Acker, T. Gemming, G. Fuchs, B. Holzapfel, L. Schultz: Stoichiometry dependence of superconductivity and microstructure in mechanically alloyed MgB2, Journal of Applied Physics 97 (2005) Nr. 5, S. 56105/1-3 URL

O. Perner, W. Haessler, J. Eckert, C. Fischer, C. Mickel, G. Fuchs, B. Holzapfel, L. Schultz: Effects of oxide particle addition on superconductivity in nanocrystalline MgB2 bulk samples, Physica C 432 (2005) Nr. 1-2, S. 15-24 URL

O. Perner, W. Haessler, C. Fischer, G. Fuchs, B. Holzapfel, L. Schultz, J. Eckert: Enhanced critical current density in nanocrystalline mechanically alloyed MgB2 bulk and Fe sheathed tapes, IEEE Transactions on Applied Superconductivity 15 (2005) Nr. 2, S. 3192-3195

L. Schultz, O. Perner, W. Haessler, C. Fischer, G. Fuchs, B. Holzapfel, J. Eckert: Mechanically alloyed MgB2 superconductors: microstructure, tape formation and critical currents, Journal of Metastable and Nanocrystalline Materials 24-25 (2005), S. 559-564

S. Scudino, J. Eckert, C. Mickel, L. Schultz: On the amorphous-to-quasicrystalline phase transformation in ball-milled and melt-spun Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 glassy alloys, Journal of Non-Crystalline Solids 351 (2005) Nr. 10-11, S. 856-862 URL

S. Scudino, J. Eckert, C. Mickel, P. Schubert-Bischoff, H. Breitzke, K. Lueders, L. Schultz: Quasicrystalline phase formation in Zr–Ti–Nb–Cu–Ni–(Al) metallic glasses, Journal of Alloys and Compounds 387 (2005) Nr. 1-2, S. 269-273 URL

M. Stoica, S. Roth, J. Eckert, L. Schultz, M.D. Baro: Bulk amorphous FeCrMoGaPCB: Preparation and magnetic properties, Journal of Magnetism and Magnetic Materials 290-291 (2005) Nr. Part 2, S. 1480-1482 URL

M. Stoica, J. Eckert, S. Roth, Z.F. Zhang, L. Schultz, W.H. Wang: Mechanical behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass, Intermetallics 13 (2005) Nr. 7, S. 764-769 URL

R. Sato Turtelli, C. Bormio-Nunes, G. Kumar, R. Groessinger, J. Eckert, L. Schultz: Magnetostriction of hard magnetic Nd80Fe20 mold-cast rod, Journal of Magnetism and Magnetic Materials 285 (2005) Nr. 3, S. 395-400 URL

S. Venkataraman, E. Rozhkova, J. Eckert, L. Schultz, D.J. Sordelet: Thermal stability and crystallization kinetics of Cu-reinforced Cu47Ti33Zr11Ni8Si1 metallic glass composite powders synthesized by ball milling: the effect of particulate reinforcement, Intermetallics 13 (2005) Nr. 8, S. 833-840 URL

T.G. Woodcock, F.-Y. Xie, G. Alcala, S. Mato, W. Loeser, A. Gebert, J. Eckert, L. Schultz: Phase formation in quinary Ti-based nanocomposites and an analogous ternary system with a view to thermodynamic modelling, Journal of Metastable and Nanocrystalline Materials 24-25 (2005), S. 53-56

T.G. Woodcock, M. Kusy, S. Mato, G. Alcala, J. Thomas, W. Loeser, A. Gebert, J. Eckert, L. Schultz: Formation of a metastable eutectic during the solidification of the alloy Ti60Cu14Ni12Sn4Ta10, Acta Materialia 53 (2005) Nr. 19, S. 5141-5149 URL

T.G. Woodcock, G. Alcala, S. Mato, A. Gebert, W. Loeser, J. Eckert, L. Schultz: Microstructural and nano-mechanical characterisation of multicomponent composites nanocrystalline matrix, Advanced Engineering Materials 7 (2005) Nr. 4, S. 197-201

H. Zhang, X.-F. Pan, Z.-F. Zhang, J. Das, K.B. Kim, C. Mueller, F. Baier, M. Kusy, A. Gebert, G. He, J. Eckert: Toughening mechanisms of a Ti-based nanostructured composite containing ductile dendrites, Zeitschrift fuer Metallkunde 96 (2005) Nr. 6, S. 675-680

2004

G. Alcala, S. Mato, T.G. Woodcock, U. Hangen, J. Eckert, A. Gebert, L. Schultz: Nanomechanical characterization of Ti-base nanostructure-dendrite composite, Zeitschrift fuer Metallkunde 95 (2004) Nr. 5, S. 317-319

J.M. Borrego, C.F. Conde, A. Conde, S. Roth, J. Eckert, J.M. Greneche: Moessbauer study of FeCoSiAlGaPCB amorphous alloys, Journal of Applied Physics 95 (2004) Nr. 8, S. 4151-4156 URL

S. Bossuyt, S.V. Madge, G.Z. Chen, A. Castellero, S. Deledda, J. Eckert, D.J. Fray, A.L. Greer: Electrochemical removal of oxygen for processing glass-forming alloys, Materials Science and Engineering A 375-377 (2004), S. 240-243 URL

H. Breitzke, K. Lueders, S. Scudino, U. Kuehn, J. Eckert: NMR investigations of medium-range order and quasicrystal formation in Zr59Cu20Al10Ni8Ti3 metallic glass
, Physical Review B 70 (2004), S. 14201/1-12 URL

M. Calin, H. Grahl, M. Adam, J. Eckert, L. Schultz: Synthesis and thermal stability of ball-milled and melt-quenched amorphous and nanostructured Al-Ni-Nd-Co alloys, Journal of Materials Science 39 (2004) Nr. 16-17, S. 5295-5298

M. Calin, M. Stoica, J. Eckert, A. Reza Yavari, L. Schultz: Phase formation, thermal stability and crystallization behavior of Cu47Ti33Zr11Ni8X1 (X=Fe, Si, Sn, Pb) bulk glassy alloys, Zeitschrift fuer Metallkunde 95 (2004) Nr. 11, S. 970-977

L.C. Damonte, M.A. Bab, L. Mendoza-Zelis, S. Deledda, J. Eckert: Local order changes in amorphous Zr52.5Hf2Ti7.5Cu20Al10Ni8 alloy upon crystallization, Journal of Metastable and Nanocrystalline Materials; Proceedings of the 10th ISMANAM 2003; 20-21 (2004), S. 499-504

J. Das, S.K. Roy, W. Loeser, J. Eckert, L. Schultz: Novel in situ nanostructure-dendrite composites in Zr-base multicomponent alloy system, Materials and Manufacting Processes 19 (2004) Nr. 3, S. 423-437 URL

J. Degmova, S. Roth, J. Eckert, H. Grahl, L. Schultz: Magnetic properties of bulk amorphous FeAlGaPCBSi samples prepared by ball-milling and subsequent hot pressing, Materials Science and Engineering A 375-377 (2004), S. 265-269 URL

S. Deledda, J. Eckert, L. Schultz: Mechanically alloyed Zr–Cu–Al–Ni–C glassy powders, Materials Science and Engineering A 375-377 (2004), S. 804-808 URL

J. Eckert, G. He, Z.F. Zhang, W. Loeser: Fracture-induced melting in glassy and nanostructured composite materials, Journal of Metastable and Nanocrystalline Materials; Proceedings of the 10th ISMANAM 2003; 20-21 (2004), S. 357-365

C. Fischer, W. Haessler, C. Rodig, O. Perner, G. Behr, M. Schubert, K. Nenkov, J. Eckert, B. Holzapfel, L. Schultz: Critical current densities of superconducting MgB2 tapes prepared on the base of mechanically alloyed precursors, Physica C 406 (2004) Nr. 1-2, S. 121-130 URL

E. Garcia-Matres, A. Wiedenmann, G. Kumar, J. Eckert, H. Hermann, L. Schultz: Hard magnetic properties of bulk amorphous Nd60Fe20Co10Al10 investigated by SANSPOL, Physica B 350 (2004) Nr. 1-3, Suppl. 1, S. e315-e318 URL

A. Gebert, R.V. Subba Rao, U. Wolff, S. Baunack, J. Eckert, L. Schultz: Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass, Materials Science and Engineering A 375-377 (2004), S. 280-284 URL

G. He, W. Loeser, J. Eckert, L. Schultz: Microstructure, mechanical properties and fracture mechanism of As-cast (Ti0.5Cu0.25Ni0.15Sn0.05Zr0.05)(100-X)Mo-X composites, Metallurgical and Materials Transactions A 35A (2004) Nr. 5, S. 1591-1601

G. He, J. Eckert, W. Loeser, M. Hagiwara: Composition dependence of the microstructure and the mechanical properties of nano/ultrafine-structured Ti-Cu-Ni-Sn-Nb alloys, Acta Materialia 52 (2004) Nr. 10, S. 3035-3046 URL

G. He, W. Loeser, J. Eckert: Devitrification and phase transformation of (Ti0.5Cu0.25Ni0.15Sn0.05Zr0.05)100-xMox metallic glasses, Scripta Materialia 50 (2004) Nr. 1, S. 7-11 URL

G. He, J. Eckert, M. Hagiwara: Glass-forming ability and crystallization behavior of Ti-Cu-Ni-Sn-M (M=Zr, Mo, and Ta) metallic glasses, Journal of Applied Physics 95 (2004) Nr. 4, S. 1816-1821 URL

G. He, J. Eckert, W. Loeser, M. Hagiwara: Processing dependence of Young`s modulus of Ti-base nanostructured alloys, Solid State Communications 129 (2004) Nr. 11, S. 711-715 URL

D.C. Ile, A. Revesz, H. Grahl, J. Eckert, P. Crespo, P. Marin, A. Hernando, S. Surinach, J.S. Munoz, M.D. Baro: Thermal stability and crystallization behavior of Fe77C5B4(AlGa)3(PSi)11 metallic glasses, Materials Science and Engineering A 375-377 (2004), S. 297-301 URL

P. Kollar, J. Bednarcik, S. Roth, H. Grahl, J. Eckert: Structure and magnetic properties of hot pressed Co-based powder, Journal of Magnetism and Magnetic Materials 278 (2004) Nr. 3, S. 373-378 URL

U. Kuehn, J. Eckert, N. Mattern, H.-J. Klauss, L. Schultz: Zr-Nb-Cu-Ni-Al glass or nanocrystalline matrix composites containing dendritic BCC phase precipitates, Journal of Metastable and Nanocrystalline Materials; Proceedings of the 10th ISMANAM 2003; 20-21 (2004), S. 41-46

U. Kuehn, J. Eckert, N. Mattern, L. Schultz: Microstructure and mechanical properties of slowly cooled Zr–Nb–Cu–Ni–Al composites with ductile bcc phase, Materials Science and Engineering A 375-377 (2004), S. 322-326 URL

G. Kumar, J. Eckert, S. Roth, W. Loeser, K.-H. Mueller, L. Schultz: Magnetic properties of amorphous Nd–Fe–Co–Al alloys, Materials Science and Engineering A 375-377 (2004), S. 1083-1086 URL

W. Loeser, J. Das, A. Gueth, H.-J. Klauss, C. Mickel, U. Kuehn, J. Eckert, S.K. Roy, L. Schultz: Effect of casting conditions on dendrite-amorphous/nanocrystalline Zr–Nb–Cu–Ni–Al in situ composites, Intermetallics 12 (2004) Nr. 10-11, S. 1153-1158 URL

N. Mattern, J. Sakowski, U. Kuehn, H. Vinzelberg, J. Eckert: Structural behavior and glass transition of bulk metallic glasses, Journal of Non-Crystalline Solids 345-346 (2004), S. 758-761 URL

N. Mattern, U. Kuehn, J. Eckert: Glass transition and crystallization of Zr60Ti2Al10Cu20Ni8 bulk metallic glass, Journal of Metastable and Nanocrystalline Materials; Proceedings of the 10th ISMANAM 2003; 20-21 (2004), S. 59-64

N. Mattern, U. Kuehn, H. Hermann, S. Roth, H. Vinzelberg, J. Eckert: Thermal behavior and glass transition of Zr-based bulk metallic glasses, Materials Science and Engineering A 375-377 (2004), S. 351-354 URL

U. Kamachi Mudali, S. Scudino, U. Kuehn, J. Eckert, A. Gebert: Polarisation behaviour of the Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 alloy in different microstructural states in acid solutions, Scripta Materialia 50 (2004) Nr. 11, S. 1379-1384 URL

U. Kamachi Mudali, S. Baunack, J. Eckert, L. Schultz, A. Gebert: Pitting corrosion of bulk glass-forming zirconium-based alloys, Journal of Alloys and Compounds 377 (2004) Nr. 1-2, S. 290-297 URL

B.S. Murty, P. Barua, V. Srinivas, F. Schurack, J. Eckert: Synthesis of (Al65Cu20Fe15)(100-x)Si-x quasicrystalline alloys by mechanical alloying, Journal of Non-Crystalline Solids 334-335 (2004), S. 44-47 URL

S. Parida, S. Ram, J. Eckert, S. Roth, W. Loeser, L. Schultz: Bulk glass forming and thermal stability in Fe67.0Co9.5Nd3.0Dy0.5B20 alloy, Materials Letters 58 (2004) Nr. 12-13, S. 1844-1852 URL

O. Perner, J. Eckert, W. Haessler, C. Fischer, K.-H. Mueller, G. Fuchs, B. Holzapfel, L. Schultz: Microstructure and impurity dependence in mechanically alloyed nanocrystalline MgB2 superconductors, Superconductor Science and Technology 17 (2004) Nr. 10, S. 1148-1153 URL

G. Saage, S. Roth, J. Eckert, L. Schultz: Low magnetostriction crystalline ribbons prepared by melt–spinning and reactive annealing, Materials Science and Engineering A 375-377 (2004), S. 1125-1128 URL

G. Saage, S. Roth, J. Eckert, L. Schultz: Extraction of boron Fe80B20 ribbons by annealing under hydrogen flow, Journal de Physique IV/ 2nd International Conference on Thermal Process Modelling and Computer Simulation, Proceedings, S. Denis; P. Archambault; J.-M. Bergheau; R. Fortunier (eds.) 120 (2004), S. 55-59

M. Savyak, S. Hirnyj, H.-D. Bauer, M. Uhlemann, J. Eckert, L. Schultz, A. Gebert: Electrochemical hydrogenation of Mg65Cu25Y10 metallic glass, Journal of Alloys and Compounds 364 (2004), S. 229-237 URL

S. Scudino, U. Kuehn, L. Schultz, D. Nagahama, K. Hono, J. Eckert: Microstructure evolution upon devitrification and crystallization kinetics of Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 melt-spun glassy ribbon, Journal of Applied Physics 95 (2004) Nr. 7, S. 3397-3404 URL

S. Scudino, C. Mickel, L. Schultz, J. Eckert, X.Y. Yang, D.J. Sordelet: Quasicrystal formation in mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders, Applied Physics Letters 85 (2004) Nr. 19, S. 4349-4351 URL

S. Scudino, J. Eckert, L. Schultz: Possible influence of quenched-in nuclei on quasicrystal formation in mechanically alloyed Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 glassy powder, Journal of Materials Research 19 (2004) Nr. 8, S. 2211-2215 URL

S. Scudino, U. Kuehn, L. Schultz, H. Breitzke, K. Lueders, J. Eckert: Formation of quasicrystals in ball-milled amorphous Zr-Ti-Nb-Cu-Ni-Al alloys with different Nb content, Journal of Materials Science 39 (2004) Nr. 16-17, S. 5483-5486 URL

A. Slipenyuk, J. Eckert: Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass, Scripta Materialia 50 (2004) Nr. 1, S. 39-44 URL

J. Sort, D.C. Ile, A.P. Zhilyaev, A. Concustell, T. Czeppe, M. Stoica, S. Surinach, J. Eckert, M.D. Baro: Cold-consolidation of ball-milled Fe-based amorphous ribbons by high pressure torsion, Scripta Materialia 50 (2004) Nr. 9, S. 1221-1225 URL

M. Stoica, J. Eckert, S. Roth, L. Schultz: Preparation of bulk amorphous Fe–Cr–Mo–Ga–P–C–B alloys by copper mold casting, Materials Science and Engineering A 375-377 (2004), S. 399-402 URL

Z.G. Sun, G. Kumar, W. Loeser, J. Eckert, K.-H. Mueller, L. Schultz: Glass forming ability of Nd60TM30Al10 (TM=Fe, Co, Ni, Cu, Mn) alloys, Materials Science and Engineering A 375-377 (2004), S. 403-406 URL

Z.G. Sun, G. Kumar, W. Loeser, J. Eckert, L. Schultz: Effect of Y addition on the microstructure and magnetic properties of Nd60-xYxFe30Al10 mould-cast alloys, Journal of Alloys and Compounds 366 (2004) Nr. 1-2, S. 248-253 URL

B.C. Wei, G.S. Yu, W.H. Li, W. Loeser, S. Roth, J. Eckert: Magnetic properties and magnetic domain structure of bulk glass forming Nd60Al10Fe20Co10 alloy, Physica Status Solidi A 201 (2004) Nr. 7, S. 1563-1569 URL

B.C. Wei, G.S. Yu, W. Loeser, L. Xia, S. Roth, W.H. Wang, J. Eckert: Deformation behavior and dilatometric measurements of Nd–Fe based bulk metallic glass, Materials Science and Engineering A 375-377 (2004), S. 1161-1164 URL

Z.F. Zhang, J. Eckert, L. Schultz: Fatigue and fracture behavior of bulk metallic glass, Metallurgical and Materials Transactions 35A (2004), S. 3489-3498

2003

J. Bednarcik, P. Kollar, S. Roth, J. Eckert: Co-based soft magnetic bulk amorphous ferromagnets prepared by powder consolidation, Physica Status Solidi A 199 (2003) Nr. 2, S. 299-304 URL

J.M. Borrego, A. Conde, S. Roth, J. Eckert: Soft magnetic properties of FeCoSiAlGaPCB amorphous alloys, Journal of Magnetism and Magnetic Materials 254-255 (2003), S. 444-446 URL

M. Calin, J. Eckert, L. Schultz: High-strength Cu-Ti-rich bulk metallic glasses and nano-composites- Dedicated to Professor Otmar Voehringer on the occasion of his 65th birthday, Zeitschrift fuer Metallkunde 94 (2003) Nr. 5, S. 615-620

M. Calin, J. Eckert, L. Schultz: Improved mechanical behavior of Cu-Ti-based bulk metallic glass by in situ formation of nanoscale precipitates, Scripta Materialia 48 (2003) Nr. 6, S. 653-658 URL

L.C. Damonte, L.A. Mendoza-Zelis, S. Deledda, J. Eckert: Effect of preparation conditions on the short-range order in Zr-based bulk glass-forming alloys, Materials Science and Engineering A 343 (2003), S. 194-198 URL

J. Das, A. Gueth, H.-J. Klauss, C. Mickel, W. Loeser, J. Eckert, S.K. Roy, L. Schultz: Effect of casting conditions on microstructure and mechanical properties of high-strength Zr73.5Nb9Cu7Ni1Al9.5 in situ composites, Scripta Materialia 49 (2003) Nr. 12, S. 1189-1195 URL

J. Das, W. Loeser, U. Kuehn, J. Eckert, S.K. Roy, L. Schultz: High-strength Zr-Nb-(Cu,Ni,Al) composites with enhanced plasticity, Applied Physics Letters 82 (2003) Nr. 26, S. 4690-4692 URL

J. Eckert, F. Schurack, L. Schultz: Synthesis and mechanical properties of high strength aluminium-based quasicrystalline composites, Journal of Metastable and Nanocrystalline Materials 15-16 (2003), S. 245-252

J. Eckert, B. Bartusch, A. Gebert: The effect of nanosized Y2O3 as a second phase in mechanically alloyed Mg-Y-Cu glass matrix composites, Journal of Metastable and Nanocrystalline Materials 15-16 (2003), S. 37-42

J. Eckert, G. He, J. Das, W. Loeser: Nanostructured composites in multicomponent alloy systems, Materials Transactions 44 (2003) Nr. 10, S. 1999-2006

C. Fischer, C. Rodig, W. Haessler, O. Perner, J. Eckert, K. Nenkov, G. Fuchs, H. Wendrock, B. Holzapfel, L. Schultz: Preparation of MgB2 tapes using a nanocrystalline partially reacted precursor, Applied Physics Letters 83 (2003) Nr. 9, S. 1803-1805 URL

G. Fuchs, S.-L. Drechsler, K.-H. Mueller, A. Handstein, S.V. Shulga, G. Behr, A. Guembel, J. Eckert, K. Nenkov, V.N. Narozhnyi, L. Schultz, H. Eschrig, S. Otani, H. Rosner, W.E. Pickett: A comparative study of MgB2 and other diborides, Journal of Low Temperature Physics 131 (2003) Nr. 5-6, S. 1159-1163 URL

H. Grahl, S. Roth, J. Eckert, L. Schultz: Stability and magnetic properties of Fe-based amorphous alloys with supercooled liquid region, Journal of Magnetism and Magnetic Materials 254-255 (2003), S. 23-25 URL

A. Guembel, O. Perner, J. Eckert, G. Fuchs, K. Nenkov, K.-H. Mueller, L. Schultz: High density nanocrystalline MgB2 bulk superconductors with improved pinning, IEEE Transactions on Applied Superconductivity 13 (2003) Nr. 2, S. 3064-3067

W. Haessler, C. Rodig, C. Fischer, B. Holzapfel, O. Perner, J. Eckert, K. Nenkov, G. Fuchs: Low temerature preparation of MgB2 tapes using mechanically alloyed powder, Superconductor Science and Technology 16 (2003) Nr. 2, S. 281-284 URL

G. He, J. Eckert, W. Loeser: Stability, phase transformation and deformation behavior of Ti-base metallic glass and composites, Acta Materialia 51 (2003) Nr. 6, S. 1621-1631 URL

G. He, Z.F. Zhang, W. Loeser, J. Eckert, L. Schultz: Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass, Acta Materialia 51 (2003) Nr. 8, S. 2383-2395 URL

G. He, W. Loeser, J. Eckert: Microstructure and mechanical properties of the Zr66.4Cu10.5Ni8.7Al8Ta6.4 metallic glass-forming alloy, Scripta Materialia 48 (2003) Nr. 11, S. 1531-1536 URL

G. He, W. Loeser, J. Eckert, L. Schultz: Phase transformation and mechanical properties of Zr-base bulk glass-forming alloys, Materials Science and Engineering A 352 (2003) Nr. 1-2, S. 179-185 URL

G. He, J. Eckert, W. Loeser, L. Schultz: Novel Ti-base nanostructure-dendrite composite with enhanced plasticity, Nature materials 2 (2003) Nr. 1, S. 33-37 URL

G. He, J. Eckert, Q.L. Dai, M.L. Sui, W. Loeser, M. Hagiwara, E. Ma: Nanostructured Ti-based multi-component alloys with potential for biomedical applications, Biomaterials 24 (2003) Nr. 28, S. 5115-5120 URL

G. He, W. Loeser, J. Eckert: In situ formed Ti-Cu-Ni-Sn-Ta nanostructure-dendrite composite with large plasticity, Acta Materialia 51 (2003) Nr. 18, S. 5223-5234 URL

G. Kumar, J. Eckert, S. Roth, K.-H. Mueller, L. Schultz: Coercivity mechanism in mold-cast Nd60FexCo30-xAl10 bulk amorphous alloys, Journal of Alloys and Compounds 348 (2003) Nr. 1-2, S. 309-313 URL

G. Kumar, J. Eckert, S. Roth, W. Loeser, L. Schultz, S. Ram: Effect of microstructure on the magnetic properties of mold-cast and melt-spun Nd-Fe-Co-Al amorphous alloys, Acta Materialia 51 (2003) Nr. 1, S. 229-238 URL

G. Kumar, J. Eckert, W. Loeser, S. Roth, L. Schultz: Effect of Al on microstructure and magnetic properties of mould-cast Nd60Fe40-xAlx alloys, Scripta Materialia 48 (2003) Nr. 4, S. 321-325 URL

R.V. Subba Rao, U. Wolff, S. Baunack, J. Eckert, A. Gebert: Corrosion behaviour of the amorphous Mg65Y10Cu15Ag10 alloy, Corrosion Science 45 (2003) Nr. 2, S. 817-832 URL

R.V. Subba Rao, U. Wolff, S. Baunack, J. Eckert, A. Gebert: Stability of the Mg65Y10Cu15Ag10 metallic glass in neutral and weakly acidic media, Journal of Materials Research 18 (2003) Nr. 1, S. 97-105 URL

G. Saage, S. Roth, J. Eckert, L. Schultz: Low magnetostriction crystalline ribbons prepared by melt spinning and reactive annealing, Journal of Magnetism and Magnetic Materials 254-255 (2003), S. 26-28 URL

F. Schurack, J. Eckert, L. Schultz: Synthesis and mechanical properties of mechanically alloyed Al-Cu-Fe quasicrystalline composites, Philosophical Magazine 83 (2003) Nr. 11, S. 1287-1305 URL

F. Schurack, J. Eckert, L. Schultz: Al-Mn-Ce quasicrystalline composites: phase formation and mechanical properties, Philosophical Magazine 83 (2003) Nr. 7, S. 807-825 URL

S. Scudino, J. Eckert, U. Kuehn, L. Schultz: Formation of quasicrystals by partial devitrification of ball-milled amorphous Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5, Applied Physics Letters 83 (2003) Nr. 12, S. 2345-2347 URL

S. Scudino, J. Eckert, U. Kuehn, L. Schultz: Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al melt-spun and ball-milled multicomponent alloys, Journal of Metastable and Nanocrystalline Materials 15-16 (2003), S. 67-72

Z.G. Sun, W. Loeser, J. Eckert, K.-H. Mueller, L. Schultz: Effect of cooling rate on microstructure and magnetic properties of Nd60Fe30Al10 hard magnetic alloys, Journal of Magnetism and Magnetic Materials 261 (2003), S. 122-130 URL

Z.G. Sun, W. Loeser, J. Eckert, K.-H. Mueller, L. Schultz, T. Zhu, Z.H. Cheng: Structural and magnetic properties of Nd60Fe30-xCoxAl10 melt-spun ribbons, Journal of Applied Physics 93 (2003) Nr. 10, S. 6930-6932 URL

L. Sun, W. Wang, L. Wang, T. Kikegawa, Qi Wu, J. Zhang, C. Fan, J. Eckert, L. Schultz: Structural evaluation of Fe60Co10Zr8Mo5Nb2B15 metallic glass under high pressure, Physical Review B 68 (2003), S. 52302/1-4 URL

Z.F. Zhang, Z.G. Wang, J. Eckert: What types of grain boundaries can be passed through by persistent slip bands?, Journal of Materials Research 18 (2003) Nr. 5, S. 1031-1034 URL

Z.F. Zhang, G. He, J. Eckert, L. Schultz: Fracture mechanisms in bulk metallic glassy materials, Physical Review Letters 91 (2003) Nr. 4, S. 45505/1-4 URL

Z.F. Zhang, J. Eckert, L. Schultz: Tensile and fatigue fracture mechanisms of a Zr-based bulk metallic glass, Journal of Materials Research 18 (2003) Nr. 2, S. 456-465 URL

Z.F. Zhang, J. Eckert, L. Schultz: Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass, Acta Materialia 51 (2003) Nr. 4, S. 1167-1179 URL

2002

S. Bakai, I.M. Neklyudov, P.I. Stoyev, J. Eckert, U. Kuehn: Mechanisms of plastic deformation-sources of acoustic emission in bulk metallic glass Zr52,5Ti5Cu17,9Ni14,6Al10 (in russisch), Metallofizika i Noveishie Tekhnologii 24 (2002) Nr. 10, S. 1385-1396

B. Bartusch, F. Schurack, J. Eckert: High strength magnesium-based glass matrix composites, Materials Transactions 43 (2002) Nr. 8, S. 1979-1984

N. Schlorke-de Boer, R. Schaefer, J. Eckert, L. Schultz: Drastic coercivity relaxation in amorphous Fe74Al5P11C6B4 and its dependence on the preparation method, Journal of Applied Physics 91 (2002) Nr. 10, S. 6601-6610 URL

J.M. Borrego, C.F. Conde, A. Conde, S. Roth, H. Grahl, A. Ostwald, J. Eckert: Glass-forming ability and crystallization behavior of Co62-xFexNb6Zr2B30 (x=0,16) amorphous alloys with large supercooled liquid region, Journal of Applied Physics 92 (2002) Nr. 11, S. 6607-6611 URL

J.M. Borrego, A. Conde, S. Roth, J. Eckert: Glass-forming ability and soft magnetic properties of FeCoSiAlGaPCB amorphous alloys, Journal of Applied Physics 92 (2002) Nr. 4, S. 2073-2078 URL

B.S.S. Daniel, A. Reger-Leonhard, M. Heilmaier, J. Eckert, L. Schultz: Thermal relaxation and high temperature creep of Zr55Cu30Al10Ni5 bulk metallic glass, Mechanics of Time-Dependent Materials 6 (2002) Nr. 2, S. 193-206

J. Degmova, S. Roth, J. Eckert, L. Schultz: Preparation and magnetic properties of ball-milled and subsequently hot pressed Fe77Al2.14Ga0.86P8.4C5B4Si2.6 bulk metallic glass, Journal of Metastable and Nanocrystalline Materials (online only: www.scientific.net/jmnm) 12 (2002), S. 85-92

S. Deledda, J. Eckert, L. Schultz: Thermal stability of mechanically alloyed Zr-Cu-Al-Ni glass composites containing ZrC particles as a second phase, Scripta Materialia 46 (2002) Nr. 1, S. 31-35 URL

J. Eckert, U. Kuehn, N. Mattern, G. He, A. Gebert: Structural bulk metallic glasses with different length-scale of constituent phases, Intermetallics 10 (2002) Nr. 11-12, S. 1183-1190 URL

A. Gebert, N. Ismail, U. Wolff, M. Uhlemann, J. Eckert, L. Schultz: Effects of electrochemical hydrogenation of Zr-based alloys with high glass-forming ability, Intermetallics 10 (2002) Nr. 11-12, S. 1207-1213 URL

A. Guembel, J. Eckert, G. Fuchs, K. Nenkov, K.-H. Mueller, L. Schultz: Improved superconducting properties in nanocrystalline bulk MgB2, Applied Physics Letters 80 (2002) Nr. 15, S. 2725-2727 URL

G. He, W. Loeser, J. Eckert, L. Schultz: Enhanced plasticity in a Ti-based bulk metallic glass-forming alloy by in situ formation of a composite microstructure, Journal of Materials Research 17 (2002) Nr. 12, S. 3015-3018 URL

M. Heilmaier, H. Saage, K.J. Mirpuri, J. Eckert, L. Schultz, P. Singh: Superposition of grain size and dispersion strengthening in ODS Ll2-(Al, Cr)3Ti, Materials Science and Engineering A 329-331 (2002), S. 106-111 URL

N. Ismail, M. Uhlemann, A. Gebert, J. Eckert, L. Schultz: The electrochemical hydrogen sorption behaviour of Zr-Cu-Al-Ni metallic glasses, Materials Transactions 43 (2002) Nr. 5, S. 1133-1137

R. Klemm, E. Thiele, C. Holste, J. Eckert, N. Schell: Thermal stability of grain structure and defects in submicrocrystalline and nanocrystalline nickel, Scripta Materialia 46 (2002) Nr. 9, S. 685-690 URL

U. Kuehn, J. Eckert, N. Mattern, L. Schultz: ZrNbCuNiAl bulk metallic glass matrix composites containing dendritic bcc phase precipitates, Applied Physics Letters 80 (2002) Nr. 14, S. 2478-2480 URL

G. Kumar, J. Eckert, S. Roth, W. Loeser, L. Schultz: Structural and magnetic properties of as-cast Nd-(Fe,Co)-AI alloys, Annales de Chimie Science des Materiaux 27 (2002) Nr. 5, S. 41-47 URL

G. Kumar, J. Eckert, L. Schultz, S. Ram: Formation and thermal stability of cluster structure in Nd55Cu15Ni10Co5Al15 bulk amorphous alloy, Materials Letters 53 (2002) Nr. 4-5, S. 305-315 URL

G. Kumar, J. Eckert, S. Roth, W. Loeser, S. Ram, L. Schultz: Magnetic properties of Nd-Fe-Co(Cu)-Al-B amorphous alloys prepared by nonequilibrium techniques, Journal of Applied Physics 91 (2002) Nr. 6, S. 3764-3768 URL

J.C. Li, M. Zhao, Q. Jiang, J. Eckert: Surface coating on steel by pressure friction, Materials Science and Technology 18 (2002) Nr. 11, S. 1382-1384

N. Mattern, J. Eckert, U. Kuehn, H. Hermann, J. Sakowski, G. Herms, J. Neuefeind: Structural behavior of Zr52Ti5Cu18Ni15Al10 bulk metallic glass at high temperatures, Applied Physics Letters 80 (2002) Nr. 24, S. 4525-4527 URL

N. Mattern, U. Kuehn, H. Hermann, H. Ehrenberg, J. Neuefeind, J. Eckert: Short-range order of Zr62-xTixAl10Cu20Ni8 bulk metallic glasses, Acta Materialia 50 (2002) Nr. 2, S. 305-314 URL

N. Mattern, U. Kuehn, J. Sakowski, J. Neuefeind, J. Eckert: Structure of Zr52Ti5CU18Ni15Al10 bulk metallic glass at elevated temperatures, Materials Transactions 43 (2002) Nr. 8, S. 1947-1951

N. Mitrovic, S. Roth, J. Eckert, C. Mickel: Microstructure evolution and soft magnetic properties of Fe72-xNbxAl5Ga2P11C6B4 (x=0, 2) metallic glasses, Journal of Physics D: Applied Physics 35 (2002) Nr. 18, S. 2247-2253 URL

V.N. Narozhnyi, G. Fuchs, A. Handstein, A. Guembel, J. Eckert, K. Nenkov, D. Hinz, O. Gutfleisch, A. Waelte, L.N. Bogacheva, I.E. Kostyleva, K.-H. Mueller, L. Schultz: Comparative study of dense bulk MgB2 materials prepared by different methods, Journal of Superconductivity: Incorporating Novel Magnetism 15 (2002) Nr. 6, S. 599-601

M. Qi, X.D. Wang, S. Deledda, J. Eckert, L. Schultz: Influence of Si addition and relaxation on the crystallization of Zr-Al-Ni-Cu based amorphous alloys, Journal of Materials Science Letters 21 (2002) Nr. 11, S. 893-896

V.R. Raju, U. Kuehn, U. Wolff, F. Schneider, J. Eckert, R. Reiche, A. Gebert: Corrosion behaviour of Zr-based bulk glass-forming alloys containing Nb or Ti, Materials Letters 57 (2002) Nr. 1, S. 173-177 URL

S. Roth, H. Grahl, J. Degmova, N. Schlorke-de Boer, M. Stoica, J.M. Borrego, A. Conde, N.M. Mitrovic, J. Eckert: Magnetic properties of (Fe, Co)-(Al,Ga,Si)-(B,C,P) alloys with large supercooled liquid region: Influence of preparation conditions and heat treatment, Journal of Optoelectronics and Advanced Materials 4 (2002) Nr. 2, S. 199-205

F. Schneider, W. Schwarz, J. Eckert, A. Gebert, V.R. Raju: Corrosion behaviour of carbon steel coated with Zr-based metallic glass, Materials and Corrosion 53 (2002) Nr. 2, S. 85-90 URL

L. Schultz, A. Bollero, A. Handstein, D. Hinz, A. Kirchner, A. Yan, K.-H. Mueller, G. Kumar, J. Eckert, O. Gutfleisch: Nanocomposite magnetic materials, Journal of Korean Powder Metallurgy Institute 9 (2002) Nr. 6, S. 381-393

R.M. Srivastava, J. Eckert, W. Loeser, B.K. Dhindaw, L. Schultz: Cooling rate evaluation for bulk amorphous alloys from eutectic microstructures in casting processes, Materials Transactions 43 (2002) Nr. 7, S. 1670-1675

M. Stoica, J. Eckert, S. Roth, L. Schultz, A.R. Yavari, A. Kvick: Casting and phase transformations of Fe65.5Cr4Mo4Ga4P12C5B5.5, Journal of Metastable and Nanocrystalline Materials (online only: www.scientific.net/jmnm) 12 (2002), S. 77-84

M.H. Stoica, J. Degmova, S. Roth, J. Eckert, H. Grahl, L. Schultz, A.R. Yavari, A. Kvick, G. Heunen: Magnetic properties and phase transformations of bulk amorphous Fe-based alloys obtained by different techniques, Materials Transactions 43 (2002) Nr. 8, S. 1966-1973

Z.G. Sun, W. Loeser, J. Eckert, K.-H. Mueller, L. Schultz: Magnetic properties of Nd60-xYxFe30Al10 (x=0, 10, 30) melt-spun ribbons containing two amorphous magnetic phases, Journal of Applied Physics 91 (2002) Nr. 11, S. 9267-9271 URL

Z.G. Sun, W. Loeser, J. Eckert, K.-H. Mueller, L. Schultz: Phase separation in Nd60-xYxFe30Al10 melt-spun ribbons, Applied Physics Letters 80 (2002) Nr. 5, S. 772-774 URL

V.V. Tcherdyntsev, S.D. Kaloshkin, A.I. Salimon, E.A. Leonova, I.A. Tomilin, J. Eckert, F. Schurack, V.D. Rogozin, S.P. Pisarev, Yu.P. Trykov: Al-Cu-Fe quasicrystalline phase formation by mechanical alloying, Materials and Manufacturing Processes 17 (2002) Nr. 6, S. 825-841

R. Sato Turtelli, D. Triyono, R. Groessinger, H. Michor, J.H. Espina, J.P. Sinnecker, H. Sassik, J. Eckert, G. Kumar, Z.G. Sun, G.J. Fan: Coercivity mechanism in Nd60Fe30Al10 and Nd60Fe20Co10Al10 alloys, Physical Review B 66 (2002) Nr. 5, S. 54441/1-8 URL

B.C. Wei, W. Loeser, L. Xia, S. Roth, M.X. Pan, W.H. Wang, J. Eckert: Anomalous thermal stability of Nd-Fe-Co-Al bulk metallic glass, Acta Materialia 50 (2002) Nr. 17, S. 4357-4367 URL

U. Wolff, A. Gebert, J. Eckert, L. Schultz: Effect of surface pretreatment on the electrochemical activity of a glass-forming Zr-Ti-Al-Cu-Ni alloy, Journal of Alloys and Compounds 346 (2002) Nr. 1-2, S. 222-229 URL

L. Xing, J. Eckert, W. Loeser: Local ordering upon crystallization of bulk amorphous alloys, Annales de Chimie Science des Materiaux 27 (2002) Nr. 5, S. 69-75 URL

2001

I. Boerner, J. Eckert: Phase formation and properties of mechanically alloyed amorphous Al85Y8Ni5Co2, Scripta Materialia 45 (2001) Nr. 2, S. 237-244 URL

S. Deledda, J. Eckert, L. Schultz: Nanocrystalline CaO and ZrC as a second phase in amorphous Zr-Cu-Al-Ni matrix composites, Journal of Metastable and Nanocrystalline Materials 10 (2001), S. 85-90

J. Eckert, S. Deledda, U. Kuehn, A. Reger-Leonhard: Bulk metallic glasses and composites in multicomponent systems, Materials Transactions 42 (2001) Nr. 4, S. 650-655

J. Eckert, U. Kuehn, N. Mattern, A. Reger-Leonhard, M. Heilmaier: Bulk nanostructured Zr-based multiphase alloys with high strength and good ductility, Scripta Materialia 44 (2001) Nr. 8-9, S. 1587-1590 URL

J. Eckert, A. Reger-Leonhard, B. Weiss, M. Heilmaier: Nanostructured materials in multicomponent alloy system, Materials Science and Engineering A 301 (2001) Nr. 1, S. 1-11 URL

J. Eckert, A. Reger-Leonhard, B. Weiss, M. Heilmaier, L. Schultz: Bulk nanostructured multicomponent alloys, Advanced Engineering Materials 3 (2001) Nr. 1-2, S. 41-47

A. Gebert, U. Wolff, A. John, J. Eckert, L. Schultz: Stability of the bulk glass-forming Mg65Y10Cu25 alloy in aqueous electrolytes, Materials Science and Engineering A 299 (2001) Nr. 1-2, S. 125-135 URL

A. Gebert, K. Buchholz, A.M. El-Aziz, J. Eckert: Hot water corrosion behaviour of Zr-Cu-Al-Ni bulk metallic glass, Materials Science and Engineering A 316 (2001) Nr. 1-2, S. 60-65 URL

A. Gebert, J. Eckert, U. Kuehn, A. Reger-Leonhard: Nanostructured Zr-based alloys - phase formation and mechanical properties, Chinese Physics 10 (2001) Nr. Suppl., S. S40-S44

N. Ismail, A. Gebert, M. Uhlemann, J. Eckert, L. Schultz: Effect of hydrogen on Zr65Cu17.5Al7.5Ni10 metallic glass, Journal of Alloys and Compounds 314 (2001) Nr. 1-2, S. 170-176 URL

N. Mattern, S. Roth, H.-D. Bauer, G. Henninger, J. Eckert: Influence of iron additions on structure and properties of amorphous Zr65Al7.5Cu17.5Ni10, Materials Science and Engineering A 304-306 (2001), S. 311-314 URL

N. Mattern, S. Roth, U. Kuehn, M. Hofman, H.-D. Bauer, J. Eckert: Formation and nanocrystals by crystallisation of Zr-Al-Cu-Ni-Fe metallic glasses, Materials Transactions 42 (2001) Nr. 8, S. 1509-1516

N. Mitrovic, S. Roth, J. Eckert: Kinetics of the glass-transition and crystallization process of Fe72-xNbxAl5Ga2P11C6B4 (x=0,2) metallic glasses, Applied Physics Letters 78 (2001) Nr. 15, S. 2145-2147 URL

F. Schurack, J. Eckert, L. Schultz: Synthesis and mechanical properties of cast quasicrystal-reinforced Al alloys, Acta Materialia 49 (2001) Nr. 8, S. 1351-1361 URL

W.H. Wang, R.J. Wang, G.J. Fan, J. Eckert: Formation and properties of Zr-(Ti,Nb)-Cu-Ni-Al bulk metallic glasses, Materials Transactions 42 (2001) Nr. 4, S. 587-591

2000

K. Buchholz, A. Gebert, K. Mummert, J. Eckert, L. Schultz: Corrosion behaviour of bulk amorphous and crystalline Zr55Al10Cu30Ni5 alloys at ambient and elevated temperature, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 1, S. 213-218

L.C. Damonte, L. Mendoza-Zélis, J. Eckert: Short-range order in bulk Zr- and Hf-based amorphous alloys, Materials Science and Engineering A 278 (2000) Nr. 1-2, S. 16-21 URL

G. David, S. Roth, J. Eckert, L. Schultz: Effect of annealing in hydrogen on composition, structure and magnetic properties of rapidly quenched Fe-Co-Si-TM-B ribbons, Journal of Magnetism and Magnetic Materials 215-216 (2000), S. 434-436 URL

G. David, S. Roth, J. Eckert, L. Schultz: Effect of annealing in hydrogen on composition, structure and magnetic properties of rapidly quenched Fe-Co-Si-TM-B ribbons, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 2, S. 835-840

J. Eckert, A. Kuebler, A. Reger-Leonhard, A. Gebert, M. Heilmaier: Glass transition, viscosity of the supercooled liquid and crystallization behaviour of Zr-Al-Cu-Ni-Fe metallic glasses, Materials Transactions JIM 41 (2000) Nr. 11, S. 1415-1422

G.J. Fan, J. Eckert, W. Loeser, S. Roth, L. Schultz: Effect of Co and Cu alloying on Nd-Fe-Al based bulk amorphous alloys, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 1, S. 97-102

G.J. Fan, W. Loeser, S. Roth, J. Eckert, L. Schultz: Glass-forming ability and magnetic properties of Nd70-xFe20Al10Cox alloys, Journal of Materials Research 15 (2000) Nr. 7, S. 1556-1563

G.J. Fan, W. Loeser, S. Roth, J. Eckert: Glass-forming ability of RE-Al-TM alloys (RE=Sm, Y; TM=Fe, Co, Cu), Acta Materialia 48 (2000) Nr. 15, S. 3823-3831 URL

A. Gebert, U. Wolff, A. John, J. Eckert: Corrosion behaviour of Mg65Y10Cu25 metallic glass, Scripta Materialia 43 (2000) Nr. 3, S. 279-283 URL

A. Guembel, J. Eckert, A. Handstein, L. Schultz: Structural and superconducting properties of mechanically alloyed Y-Pd1-xTMx-B-C (TM=Ni, Pt), Physica B 284-288 (2000), S. 1107-1108 URL

A. Guembel, J. Eckert, A. Handstein, W. Skrotzki, L. Schultz: Variation of superconductivity in mechanically alloyed pseudo-quaternary Y-Pt/Pd-B-C, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 2, S. 924-930

M. Heilmaier, J. Eckert: The synthesis and properties of Zr-based metallic glasses and glass-matrix composites, JOM Journal of the Minerals Metals & Materials Society 52 (2000) Nr. 7, S. 43-47

N. Ismail, M. Uhlemann, A. Gebert, J. Eckert: Hydrogenation and its effect on the crystallisation behaviour of Zr55Cu30Al10Ni5 metallic glass, Journal of Alloys and Compounds 298 (2000) Nr. 1-2, S. 146-152 URL

J.Z. Jiang, T.J. Zhou, H. Rasmussen, U. Kuehn, J. Eckert, C. Lathe: Crystallization in Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under pressure, Applied Physics Letters 77 (2000) Nr. 22, S. 3553-3555 URL

J.Z. Jiang, J.S. Olsen, L. Gerward, S. Abdali, J. Eckert, N. Schlorke-de Boer, L. Schultz, J. Truckenbrodt, P.X. Shi: Pressure effect on crystallization of metallic glass Fe72P11C6Al5B4Ga2 alloy with wide supercooled liquid region, Journal of Applied Physics 87 (2000) Nr. 5, S. 2664-2666 URL

U. Kuehn, J. Eckert, N. Mattern, L. Schultz: As-cast quasicrystalline phase in a Zr-based multicomponent bulk alloy, Applied Physics Letters 77 (2000) Nr. 20, S. 3176-3178 URL

N. Mattern, H.-D. Bauer, J. Eckert: Formation of nanocrystals in Zr-Al-Cu-Ni alloys, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 1, S. 185-190

N. Mattern, U. Kuehn, J. Neuefeind, J. Eckert: Formation of ultrafine nanostructure by crystallization of Zr52Al6Cu14Ni8Fe20 metallic glass, Applied Physics Letters 77 (2000) Nr. 8, S. 1153-1154 URL

B. Mueller, L. Ledig, D. Hough, C.-G. Oertel, W. Skrotzki, A. Guembel, J. Eckert: X-ray crystallographic characterization of nanocrystalline and amorphous YNi2B2C superconductors, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 2, S. 689-694

M. Multigner, A. Hernando, P. Crespo, G. Rivero, A. Garcia Escorial, C. Stiller, L. Schultz, J. Eckert: Thermal decomposition of mechanically alloyed (FexCu1-x)93Zr7 (x=0.5, 0.7) solid solutions, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 2, S. 800-805

C.-G. Oertel, L. Ledig, J. Eckert, W. Skrotzki: Superconductivity of annealed and consolidated amorphous YNi2B2C powders, Crystal Research and Technology 35 (2000) Nr. 4, S. 427-435

A. Reger-Leonhard, M. Heilmaier, J. Eckert: Newtonian flow of Zr55Cu30Al10Ni5 bulk metallic glassy alloys, Scripta Materialia 43 (2000) Nr. 5, S. 459-464 URL

F. Schurack, J. Eckert, L. Schultz: Quasicrystalline Al-alloys with high strength and good ductility, Materials Science and Engineering A 294-296 (2000), S. 164-167 URL

M. Seidel, J. Eckert, I. Baecher, M. Reibold, L. Schultz: Progress of solid-state reaction and glass formation in mechanically alloyed Zr65Al7.5Cu17.5Ni10, Acta Materialia 48 (2000) Nr. 14, S. 3657-3670 URL

Wei Hua Wang, Z.X. Bao, J. Eckert: Pressure-volume relation of Zr-Ti-Cu-Ni-Be bulk metallic glass, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 1, S. 146-150

W.H. Wang, Z.X. Bao, C.X. Liu, D.Q. Zhao, J. Eckert: Equation of state of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass, Physical Review B 61 (2000) Nr. 5, S. 3166-3169 URL

B. Weiss, J. Eckert: Thermal stability and viscosity of Mg-based glasses and composites, Journal of Metastable and Nanocrystalline Materials 8 (2000) Nr. part 1, S. 129-134

L.Q. Xing, J. Eckert, W. Loeser, S. Roth, L. Schultz: Atomic ordering and magnetic properties in Nd57Fe20B8Co5Al10 solids, Journal of Applied Physics 88 (2000) Nr. 6, S. 3565-3569 URL

L.Q. Xing, T.C. Hufnagel, J. Eckert, W. Loeser, L. Schultz: Relation between short-range order and crystallization behavior in Zr-based amorphous alloys, Applied Physics Letters 77 (2000) Nr. 13, S. 1970-1972 URL

1999

J. Eckert, N. Schlorke-de Boer, B. Weiss, L. Schultz: Mechanically alloyed Mg-based metallic glasses and metallic glass composites containing nanocrystalline particles, Zeitschrift fuer Metallkunde 90 (1999) Nr. 11, S. 908-913

J. Eckert, A. Kuebler, L. Schultz: Mechanically alloyed Zr55Al10Cu30Ni5 metallic glass composites containing nanocrystalline W particles, Journal of Applied Physics 85 (1999) Nr. 10, S. 7112-7119 URL

J. Eckert, M. Seidel, L.Q. Xing, I. Boerner, B. Weiss: Nanophase composites in easy glass forming systems, Nanostructured Materials 12 (1999) Nr. 1-4, S. 439-442 URL

G.J. Fan, W. Loeser, S. Roth, J. Eckert, L. Schultz: Magnetic properties of cast Nd60-xFe20Al10Co10Cux alloys, Applied Physics Letters 75 (1999) Nr. 19, S. 2984-2986 URL

G.J. Fan, M.X. Quan, Z.Q. Hu, W. Loeser, J. Eckert: Deformation-induced microstructural changes in Fe40Ni40P14B6 metallic glass, Journal of Materials Research 14 (1999) Nr. 9, S. 3765-3774

G.J. Fan, M.X. Quan, Z.Q. Hu, J. Eckert, L. Schultz: In-situ explosive formation of NbSi2-based nanocomposites by mechanical alloying, Scripta Materialia 41 (1999) Nr. 11, S. 1147-1151 URL

A. Gebert, K. Buchholz, A. Leonhard, K. Mummert, J. Eckert, L. Schultz: Investigations on the electrochemical behaviour of Zr-based bulk metallic glasses, Materials Science and Engineering A 267 (1999) Nr. 2, S. 294-300 URL

A. Kuebler, J. Eckert, L. Schultz: Nanoparticles in an amorphous Zr55Al10Cu30Ni5-matrix - the formation of composites by mechanical alloying, Nanostructured Materials 12 (1999) Nr. 1-4, S. 443-446 URL

L. Ledig, D. Hough, C.-G. Oertel, J. Eckert, W. Skrotzki: Nanocrystal formation, amorphization and superconductivity in YNi2B2C, Journal of Alloys and Compounds 285 (1999) Nr. 1-2, S. 27-36 URL

N. Mattern, H. Ehrenberg, A. Knapp, H. Hermann, J. Eckert: Short-range order of amorphous (Zr65Al7.5Ni10)100-xFex alloys, Physica Status Solidi A 175 (1999) Nr. 2, S. 449-456 URL

M. Multigner, A. Hernando, P. Crespo, C. Stiller, J. Eckert, L. Schultz: Structural and magnetic properties of mechanically alloyed (FexCu1-x)93Zr7(x=0.5, 0.7) solid solutions, Journal of Magnetism and Magnetic Materials 197 (1999) Nr. May, S. 214-215 URL

N. Schlorke, J. Eckert, L. Schultz: Thermal and magnetic properties of bulk glass forming Fe-Al-P-C-B-(Ga) alloys, Journal of Physics D: Applied Physics 32 (1999) Nr. 8, S. 855-861 URL

N. Schlorke, B. Weiss, J. Eckert, L. Schultz: Properties of Mg-Y-Cu glasses with nanocrystalline particles, Nanostructured Materials 12 (1999) Nr. 1-4, S. 127-130 URL

F. Schurack, J. Eckert, L. Schultz: High-strength Al alloys with nano-quasicrystalline phase as main component, Nanostructured Materials 12 (1999) Nr. 1-4, S. 107-110 URL

L.Q. Xing, J. Eckert, W. Loeser, L. Schultz: High-strength materials produced by precipitation of icosahedral quasicrystals in bulk Zr-Ti-Cu-Ni-Al amorphous alloys, Applied Physics Letters 74 (1999) Nr. 5, S. 664-666 URL

L.Q. Xing, J. Eckert, W. Loeser, L. Schultz, D.M. Herlach: Crystallization behaviour and nanocrystalline microstructure evolution of a Zr57Cu20Al10Ni8Ti5 bulk amorphous alloy, Philosophical Magazine A 79 (1999) Nr. 5, S. 1095-1108 URL

L.Q. Xing, J. Eckert, L. Schultz: Deformation mechanism of amorphous and partially crystallized alloys, Nanostructured Materials 12 (1999) Nr. 1-4, S. 503-506 URL

1998

J. Eckert, N. Mattern, M. Zinkevitch, M. Seidel: Crystallization behavior and phase formation in Zr-Al-Cu-Ni metallic glass containing oxygen, Materials Transactions, JIM 39 (1998) Nr. 6, S. 623-632

J. Eckert, M. Seidel, A. Kuebler, U. Klement, L. Schultz: Oxide dispersion strengthened mechanically alloyed amorphous Zr-Al-Cu-Ni composites, Scripta Materialia 38 (1998) Nr. 4, S. 595-602 URL

A. Gebert, J. Eckert, L. Schultz: Effect of oxygen on phase formation and thermal stability of slowly cooled Zr65Al7.5Cu17.5Ni10 metallic glass, Acta Materialia 46 (1998) Nr. 15, S. 5475-5482 URL

A. Kuebler, J. Eckert, A. Gebert, L. Schultz: Influence of oxygen on the viscosity of Zr-Al-Cu-Ni metallic glasses in the undercooled liquid region, Journal of Applied Physics 83 (1998) Nr. 6, S. 3438-3440 URL

A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, L. Schultz: Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys, Nanostructured Materials 10 (1998) Nr. 5, S. 805-817 URL

N. Mattern, S. Roth, G. Henninger, H. Hermann, J. Eckert: Structural and magnetic properties of amorphous (Zr65Al7.5Cu17.5Ni10)100-xFex alloys, Journal of Physics: Condensed Matter 10 (1998) Nr. 34, S. L575-L581 URL

M. Seidel, M. Reibold, J. Eckert: Investigations of the solid state reaction process in mechanically alloyed Zr-Al-Cu-Ni bulk metallic glasses by analytical transmission electron microscopy, Fresenius Journal of Analytical Chemistry 361 (1998) Nr. 6-7, S. 740-742

L.Q. Xing, J. Eckert, W. Loeser, L. Schultz: Effect of cooling rate on the precipitation of quasicrystals from the Zr-Cu-Al-Ni-Ti amorphous alloy, Applied Physics Letters 73 (1998) Nr. 15, S. 2110-2112 URL

1997

I. Boerner, J. Eckert: Nanostructure formation and steady-state grain size of ball-milled iron powders, Mat. Sci. Engng. A Structural materials properties microstructure and processing 226 (1997) Nr. Juni, S. 541-545 URL

J. Eckert: Mechanical alloying of highly processable glassy alloys, Materials Science and Engineering A 226 (1997) Nr. Juni, S. 364-373 URL

J. Eckert, K. Jost, L. Schultz: Synthesis and properties of mechanically alloyed Y-Ni-B-C, Materials Letters 31 (1997) Nr. 3-6, S. 329-333 URL

J. Eckert, I. Boerner: Nanostructure formation and porperties of ball-milled NiAl intermetallic compound, Materials Science and Engineering A 240 (1997) Nr. Dec, S. 619-624 URL

J. Eckert: Massive amorphe Metalle, Wiss. Zeitschrift der TU Dresden 46 (1997) Nr. 3, S. 86-92

A. Gebert, K. Mummert, J. Eckert, L. Schultz, A. Inoue: Electrochemical investigations on the bulk glass forming Zr55Cu30Al10Ni5 alloy, Materials and Corrosion 48 (1997) Nr. 5, S. 293-297 URL

M. Heilmaier, H. Saage, J. Eckert: Formation of ODS Ll2-(Al,Cr)3Ti by mechanical alloying, Materials Science and Engineering A 240 (1997) Nr. Dec, S. 652-657 URL

N. Mattern, J. Eckert, M. Seidel, U. Kuehn, S. Doyle, I. Baecher: Relaxation and crystallization of amorphous Zr65Al7.5Cu17.5Ni10, Mat. Sci. Engng. A Structural materials properties microstructure and processing 226 (1997) Nr. Juni, S. 468-473 URL

N. Schlorke, J. Eckert, L. Schultz: Synthesis of multicomponent Fe-based amorphous alloys with significant supercooled liquid region by mechanical alloying, Mat. Sci. Engng A 226 (1997) Nr. Juni, S. 425-428 URL

M. Seidel, M. Reibold, I. Baecher, H.-D. Bauer, J. Eckert, L. Schultz: Progress of solid-state reaction during mechanical alloying of Zr-Al-Cu-Ni bulk metallic glass-forming alloys, Materials Science and Engineering A 226 (1997) Nr. Juni, S. 383-387 URL

C. Stiller, J. Eckert, P. Crespo, S. Roth, L. Schultz: Structural and magnetic properties of nanocrystalline (Fe-Cu)93Zr7 alloys prepared by mechanical alloying, Materials Science and Engineering A 226-228 (1997), S. 577-580 URL

1996

J. Eckert, M. Seidel, L. Schultz: Formation of amorphous alloys with significant supercooled liquid region by mechanical alloying, Journal of Non-Crystalline Solids 207 (1996) Nr. Okt. part 2, S. 500-503 URL

V. Neu, P. Crespo, R. Schaefer, J. Eckert, L. Schultz: High remanence Nd-Fe-B-X(X= Cu, Si, Nb3Cu, Zr) powders by mechanical alloying, Journal of Magnetism and Magnetic Materials 157-158 (1996), S. 61-62 URL

V. Neu, U. Klement, R. Schaefer, J. Eckert, L. Schultz: Remanence enhancement in mechanically alloyed two-phase Nd-Fe-B magnetic material, Materials Letters 26 (1996) Nr. 3, S. 167-170 URL

R. Schaefer, S. Roth, C. Stiller, J. Eckert, U. Klement, L. Schultz: Domain studies on mechanically alloyed Fe-Zr-B-Cu nanocrystalline powder, IEEE Transactions on Magnetics 32 (1996) Nr. 5 part2, S. 4383-4385

M. Seidel, J. Eckert, E. Zueco-Rodrigo, L. Schultz: Mg-based amorphous alloys with extended supercooled liquid region produced by mechanical alloying, Journal of Non-Crystalline Solids 207 (1996) Nr. Okt. part 2, S. 514-517 URL

C. Stiller, J. Eckert, S. Roth, R. Schaefer, U. Klement, L. Schultz: Mechanically alloyed Fe-Zr-(B,Cu) alloys - Effect of composition and heat treatment on the microstructure and the magnetic properties, Journal of Non-Crystalline Solids 207 (1996) Nr. Okt. part 2, S. 620-623 URL

Contributions to collected editions/proceedings

2016

T. Gustmann, A. Neves, U. Kuehn, P. Gargarella, C.S. Kiminami, C. Bolfarini, J. Eckert, S. Pauly: Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting, Fraunhofer Direct Digital Manufacturing Conference (DDMC) 2016, in: Proceedings of the Fraunhofer Direct Digital Manufacturing Conference 2016 (Fraunhofer Verlag, ISBN 978-3-8396-1001-5), 345 (2016) URL

2015

A. Panigrahi, M. Boenisch, T. Waitz, M. Calin, W. Skrotzki, J. Eckert, M. Zehetbauer: Thermal stability of HPT-induced omega phase in biocompatible Ti-16.1Nb alloys, 7th International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM) 2015, 28.6.-3.7.2015, Whistler, BC, Canada, in: Proceedings of the 7th International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM) 2015, 263-268 (2015)

J. Zeisig, H. Wendrock, J. Hufenbach, J. Eckert, U. Kuehn: Mikrostrukturelle Charakterisierung der durch Mikro- und Nanoindentierung induzierten martensitischen Phasenumwandlung in der Fe79,4Cr13Mo5V1C1,6 Stahlgusslegierung, Vortragstexte der 49. Metallographie-Tagung, Dresden/ Germany, 16.-18.9.15, in: Fortschritte in der Metallographie: [Praktische Metallographie / Sonderbaende]; 978-3-88355-410-5, 47, 71-76 (2015)

J. Zeisig, H. Wendrock, J. Hufenbach, T. Gemming, U. Kuehn, J. Eckert: Characterization of martensitic transformation in a newly developed FeCrMoVC cast alloy using micro- and nanoindentation experiments, Asia Steel International Conference 2015 (Asia Steel 2015), Yokohama/ Japan, 5.-8.10.15, in: Proceedings of the Asia Steel International Conference 2015 (Asia Steel 2015), 82-83 (2015)

2014

S. Doerfler, K. Pinkert, A. Meyer, M. Weiser, H. Althues, L. Giebeler, M. Schneider, J. Eckert, A. Michaelis, E. Beyer, S. Kaskel: Highly porous carbon electrodes for energy storage and conversion application, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 427 (2014)

L. Giebeler, F. Thoss, I. Lindemann, C. Bonatto Minella, B. Boehme, S. Peters, M. Baitinger, J. Grin, J. Eckert, L. Schultz: Solid state hydrogen storage materials and metallic anodes for mobile and stationary applications, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 385 (2014)

S. Horn, A. Freidank, M. Uhlemann, M. Stoica, J. Eckert, A. Gebert: Electrochemical micromachining of passive Fe-based bulk metallic glasses in aqueous solution, Electrochemical Micromachining Technology (INSECT) 2014, Saarbrücken/ Germany, 13.-14.11.2014, in: International Symposium on Electrochemical Machining Technology INSECT 2014: Proceedings; 978-3-95735-010-7, 103-109 (2014)

T. Marr, J. Romberg, J. Freudenberger, J. Scharnweber, A. Eschke, C.-G. Oertel, I. Okulov, R. Petters, U. Kuehn, J. Eckert, L. Schultz, W. Skrotzki: Feines Gefuege, fester Werkstoff, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 375 (2014)

K. Schulz, D. Ernst, S. Menzel, T. Gemming, J. Eckert, K.-J. Wolter: Thermosonic platinum wire bonding on platinum, 37th International Spring Seminar on Electronics Technology (ISSE), Dresden/ Germany, 7.-11.5.14, in: Proceedings, 120-124 (2014) URL

A.H. Taghvaei, M. Stoica, K. Janghorban, J. Eckert: Ball milling-induced nanocrystallization of Co40Fe22Ta8B30 metallic glass with high thermal stability and good soft magnetic properties, 5th International Conference on Nanostructures (ICNS5), Institute for Nanoscience and Nanotechnology (INST), Sharif University of Technology, Tehran/ Islamic Republic of Iran, 6.-9.3.14, in: Proceedings (Hrsg. M. Reza Ejtehadi), Part 2, 974 (2014)

J. Zhao, Q. Deng, S.M. Avdoshenko, L. Fu, J. Eckert, M.H. Ruemmeli: Direct in situ observations of single Fe atom catalytic processes and anomalous diffusion at graphene edges, in: PNAS, 111, 15641-15646 (2014) URL

2013

J. Tan, C.J. Li, Y.H. Jiang, R. Zhou, J. Eckert: Correlation between internal states and strength in bulk metallic glasses, Pacific Rim International Congress on Advanced Materials and Processing (PRICM-8), Waikaloa, Hawaii/ USA, 4.-9.8.13, in: Proceedings, Fernand Marquis (Ed.), 3199 (2013) URL

X. Wang, S. Scudino, J. Eckert: Production and characterization of Al 2024 matrix composites reinforced with beta-Al3Mg2 complex metallic alloy particles, Materials Research Society Symposium, in: MRS Proceedings, 1517, 1-11 (2013) URL

2012

B. Boehme, Y. Liang, F. Thoss, L. Giebeler, H. Ehrenberg, M. Baitinger, J. Eckert, Y. Grin: Lithium in clathrates, ECEMP- European Centre for Emerging Materials and Processes Dresden - Neue Werkstoffe und Technologien fuer nachhaltige Produkte und Prozesse, Dresden, 25.-26.10.12, in: Proceedings, International ECEMP Colloquium 2012, W. Hufenbach, M. Gude (eds.), 228-239 (2012)

J.S. Kim, M.H. Lee, D.H. Kim, U. Kuehn, J. Eckert: Synthesis of functional porous metallic material from metallic glass composites precursor by powder metallurgy route, European Congress on Advanced Materials and Processes (EUROMAT 2011), Symposium C13- Metallic Glasses and Related Composites: New Routes for Functional and Strong Materials, (M. Stoica and K. Georgarakis, eds.) Montpellier/ Frankreich, 12.-15.9.11, in: Revue de Metallurgie, 109, 11- (2012)

I. Okulov, U. Kuehn, J. Eckert, T. Marr, J. Freudenberger, L. Schultz, J. Scharnweber, C.-G. Oertel, W. Skrotzki: Duktile multikomponentige Titanlegierungen, ECEMP-European Centre for Emerging Materials and Processes Dresden - Neue Werkstoffe und Technologien fuer nachhaltige Produkte und Prozesse, Dresden, 25.-26.10.12, in: Proceedings, International ECEMP Colloquium 2012, W. Hufenbach, M. Gude (eds.), 96-107 (2012)

K.G. Prashanth, K.B. Surreddi, S. Scudino, M. Samadi Khoshkhoo, Z. Wang, D.J. Sordelet, J. Eckert: Powder metallurgy of high strength Al90.4 Y4.4 Ni4.3 Co0.9 gas-atomized powder, International Conference on Aluminium Alloys (ICAA 13), Pittsburgh/ USA, 3.-7.6.12, in: Proceedings, H. Weiland; A.D. Rollett; W.A. Cassada (eds.), 1017 (2012)

2011

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales: Mechanical engineering properties of CMAs, in: Complex Metallic Alloys : Fundamentals and Applications, Dubois, Jean-Marie (ed.), Weinheim : Wiley-VCH-Verl., 273-316 (2011)

R. Hermann, H. Hermann, M. Calin, G. Gerbeth, B. Buechner, J. Eckert: Magnetic field controlled Ti-Nb single crystal growth and determination of elastic properties, 8th International Pamir Conference on Fundamental and Applied MHD, Borgo/ Corsica, France, 5.-9.9.11, in: Proceedings, CD (2011)

I. Kaban, P. Jovari, T. Petkova, P. Petkov, A. Stoilova, B. Beuneu, W. Hoyer, N. Mattern, J. Eckert: Atomic structure of (Ge0.2Se0.8)85B15 and (Ge0.2Se0.8)85In15 glasses, in: Nanotechnological Basis for Advanced Sensors, Series: NATO Science for Peace and Security Series B: Physics and Biophysics, Reithmaier, J.P.; Paunovic, P.; Kulisch, W.; Popov, C.; Petkov, P. (eds.), Dordrecht: Springer Netherlands, 2011, Part 6, 545- (2011)

I. Kaban, P. Jovari, T. Petkova, P. Petkov, A. Stoilova, B. Beuneu, B. Hoyer, N. Mattern, J. Eckert: Atomic structure of (Ge0.2Se0.8)85B15 and (Ge0.2Se0.8) 85In15 glasses, NATO Summer School on Nanotechnological Basis for Advanced Sensors, Sozopol/ Bulgarien, 30.5.-11.6.10, in: Nanotechnological Basis for Advanced Sensors, Johann Peter Reithmaier, Perica Paunovic, Wilhelm Kulisch, Cyril Popov, Plamen Petkov (eds.), NATO Science for Peace and Security Series B: Physics and Biophysics, Part 6, Dordrecht: Springer., 195-202 (2011)

L. Loeber, D. Klemm, U. Kuehn, J. Eckert: Rapid manufacturing of cellular structures of steel or titaniumaluminide, in: Light Metals Technology V, H. Dieringa, N. Hort, K.U. Kainer (eds.), Materials Science Forum, 690, 103- (2011)

S. Scudino, J. Eckert: Nanocrystalline metals and alloys prepared by mechanical attrition, in: Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. S. H. Whang (ed.) Cambridge: Woodhead Publ., 2011, Capter 3, 59-84 (2011)

L.C. Zhang, M. Calin, J. Eckert: High-strength titanium base alloys with multiple length-scale microstructure, in: Advances in Mechanical Engineering Research, Vol. 2, David E. Malach (ed.), Nova Science Publishers 2011, 233-251 (2011)

2010

B. Boehme, F. Thoss, M. Rosenburg, I. Chumak, L. Giebeler, M. Baitinger, M. Hinterstein, A. Bell, H. Ehrenberg, J. Eckert, Y. Grin: In-situ investigation on the electrochemical reaction of Li with Ge(cF136), in: DESY- Annual Report, 1257-1258 (2010)

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales: Mechanical engineering properties of CMAs, in: Complex Metallic Alloys: Fundamentals and Applications, Dubois, Jean-Marie ; Belin-Ferre, Esther (Ed.), Weinheim: Wiley-VCH, 273-315 (2010)

M.H. Lee, J.H. Jun, J. Eckert: Effect of residual stress on mechanical property of monolithic bulk metallic glasses, 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns/ Australia, 1.-5.8.10, in: Proceedings, J.-F. Nie, A. Morton (eds.), Materials Science Forum, 654-656, 1050 (2010)

T. Marr, J. Freudenberger, A. Kauffmann, J. Scharnweber, C.-G. Oertel, W. Skrotzki, U. Siegel, U. Kuehn, J. Eckert, L. Schultz: Damaszenleichtmetalle, International ECEMP Colloquium, 2.-3.12.10, in: Proceedings, 71-79 (2010)

N. Mattern, J. Eckert: Short-range order of Cu-Zr metallic glasses, 2009 WPI-AIMR Annual Workshop, Miyagi-Zao/ Japan, 1.-6.3.09, in: Proceedings, WPI-AIMR News 10, 10, 104-110 (2010)

M. Spindler, S.B. Menzel, J. Eckert, C. Eggs: Influence of Al on resistance and power durability of Cu-based SAW metallizations, E-MRS Spring Meeting, Symposium G, Strasbourg/ France, 8.-12.6.09, in: Proceedings: Fundamentals and Technology of Multifunctional Oxide Thin Films; P. Muralt, M. Kosec, V. Raineri, S. Ravesi (eds.), IOP Publ. Ltd., London. IOP Conf. Series: Materials Science and Engineering, 8, 12013/1-3 (2010)

W. Xu, M. Calin, K.B. Kim, J. Das, K. Xia, J. Eckert: Microscopic deformation behavior and microstructural evolution in Ti-Nb-Ta-M (M = In, Ag, or Cr) beta- alloys, 2009 WPI-AIMR Annual Workshop, Miyagi-Zao/ Japan, 1.-6.3.09, in: Proceedings, WPI-AIMR News 10, 10, 111-114 (2010)

2009

S. Gorantla, F. Boerrnert, A. Bachmatiuk, R. Schoenfelder, M.H. Ruemmeli, B. Buechner, T. Gemming, J. Eckert: HRTEM Imaging of Electron Beam Irradiation Defect Dynamics in SWCNTs at 80 kV, Microscopy Conference 2009 (MC2009), Graz/ Oesterreich, 30.8.-4.9.09, in: Proceedings, W. Grogger, F. Hofer, P. Poelt (eds.) Verlag der TU Graz/ Oesterreich., Vol. 3, 141-142 (2009)

M. Sakaliyska, S. Scudino, H.V. Nguyen, K.B. Surreddi, B. Bartusch, F. Ali, J.-S. Kim, J. Eckert: Consolidation and mechanical properties of mechanically alloyed Al-Mg powders, Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, MRS Symposium 2009, Warrendale/ USA, in: MRS Symposium Proceedings, M. Palm ; B.P. Bewlay ; M. Takeyama ; J.M.K. Wiezorek ; Y.-H. He (eds), 1128, U05-46 (2009)

M. Stoica, S. Roth, J. Eckert, G. Vaughan: Glass-forming Fe-based alloys purified by fluxing techniques, International Conference on Advanced Processing for Novel Functional Materials - APNFM 2008, Dresden, 23.-25.1.08, in: Proceedings, Y. Grin, B. Kieback, J. Schmidt (eds.), 471-475 (2009)

J. Thomas, J. Schumann, T. Gemming, J. Eckert: TEM investigation of electron beam evaporated epitaxial Fe3Si films on GaAs (100) substrates, Microscopy Conference 2009 (MC2009), Graz/ Oesterreich, 30.8.-4.9.09, in: Proceedings, W. Grogger, F. Hofer, P. Poelt (eds.) Verlag der TU Graz/ Oesterreich (2009)

2008

C. Duhamel, S. Venkataraman, S. Scudino, J. Eckert: Diffusionless transformations, in: Basics of Thermodynamics and Phase Transitions in Complex Intermetallics, Book Series on Complex Metallic Alloys, E. Bellin-Ferre (ed.), Singapur: World Scientific Publisher, 2008, Vol. 1, 119-146 (2008)

K.S. Lee, H.-J. Jun, Y.W. Chang, J. Eckert, J.H. Lee: High temperature deformation and formability of Cu47.5Zr47.5Al5 bulk metallic glass, International Conference on Technology of Plasticity, Gyeongju/ Sued-Korea, 7.-11.9.08, in: Proceedings. Seoul: The Korean Society for Technology of Plasticity, CD-ROM, 570 (2008)

P. Matteis, P. Russo Spena, C. Pozzi, D. Firrao, T.A. Baser, M. Baricco, J. Eckert, L. Battezzati: Fracture of Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasss, 17th European Conference on Fracture (ECF 17). Multilevel Approach to Fracture of Materials, Components and Structures, in: Proceedings, J. Pokluda, P. Lukas, P. Sandera, I. Dlouhy (eds.) VUTIUM Brno/ Tschechische Republik; CD-ROM, 1717 (2008)

O. Perroud, A. Wiedemann, M. Stoica, J. Eckert: Nanosized megnetization density profiles in hard magnetic Nd-Fe-Co-Al-glasses, in: Phase Transformations in Multicomponent Melts, D. M. Herlach (ed), Weinheim: Wiley-VCH, 2008, 263-276 (2008)

M. Stoica, S. Roth, J. Eckert, G. Vaughan: Crystallization behavior and magnetic properties of Fe-Based bulk metallic glasses, in: Intermetallics Research Progress, Y.N. Berdovsky (ed.) Hauppauge: Nova Science Publisher, 2008, 261-277 (2008)

M. Stoica, G. Kumar, M. Emmi, O. Perroud, A. Wiedemann, A. Gebert, S. Ram, L. Schultz, J. Eckert: Microstructure and magnetic properties of rapidly quenched (Nd100-xGax)80Fe20 (x = 0, 5, 10, 15 at.%) alloys, in: Phase Transformations in Multicomponent Melts, D. M. Herlach (ed.), Weinheim: Wiley-VCH, 2008, 277-295 (2008)

K. Werniewicz, U. Kuehn, N. Mattern, B. Bartusch, J. Eckert, U. Siegel, L. Schultz, T. Kulik: Fe-Based composite materials with improved mechanical properties, in: Glass Materials Research Progres, J.C. Wolf; L. Lange (eds.), Hauppauge: Nova Science Publisher, 2008, 259-274 (2008)

2007

J. Eckert, S. Scudino: Crystallization of metallic glasses, in: Materials Processing Handbook, J.R.Groza ; J.F. Schackelford ; E.J. Lavernia M.T. Powers (eds.)Taylor and Francis, 2007, 6/1-27 (2007)

W. Haessler, O. Perner, C. Fischer, K. Nenkov, C. Rodig, M. Schubert, M. Herrmann, L. Schultz, B. Holzapfel, J. Eckert: Nanocrystalline microstructure of mechanically alloyed MgB2 superconductor precursor powder for bulk tape fabrication and implications on the superconductivity (Chapter 7), in: Superconductivity Research Horizons, E.H. Peterson (ed.), Nova Science Publ., Inc., Hauppauge, NY/ USA, 193-208 (2007)

2006

J. Eckert, J. Das, K.B. Kim: Nanostructured composites: Ti-Base alloys, in: The Dekker Encyclopedia of Nanoscience and Nanotechnology, update March 2006, 1-17 (2006) URL

M. Miller, S. Venkataraman, J. Eckert, L. Schultz, D. Sordelet: Atom probe tomography characterization of a gas atomized metallic glass, TMS Annual Meeting and Exhibition, San Antonio/ USA, 12.-16.3.06, in: Bulk Metallic Glasses, Peter Liaw (ed.); The Minerals, Metals and Materials Society 2006, 77-88 (2006)

2005

J. Eckert, J. Das, G. He, T.G. Woodcock, W. Loeser, A. Gebert: Synthesis and properties of bulk nanostructure/dendrite Ti-base composites, Conference on Processing and Fabrication of Advanced Materials XIII, Singapore, 6.-8.12.04, in: Proceedings, M. Gupta; C.Y.H. Lim; T.S. Srivatsan; R.A. Varin (eds.), Vol. 1, 40-60 (2005)

A. Handstein, O. Perner, W. Haessler, C. Fischer, G. Fuchs, O. Gutfleisch, K. Nenkov, C. Rodig, J. Eckert, B. Holzapfel, K.-H. Mueller, L. Schultz: High critical currents in nanostructured MgB2 hot-pressed pellets and Iron-sheathed tapes, Conference on Processing and Fabrication of Advanced Materials XIII, Singapore, 6.-8.12.04, in: Proceedings; M. Gupta; C.Y.H. Lim; T.S. Srivatsan; R.A. Varin (eds.), Vol. 1, 431-453 (2005)

S. Roth, G. Saage, J. Eckert, L. Schultz: Magnetic crystalline transition metal ribbons prepared by melt-spinning and reactive annealing, in: Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors; Kluwer Academic Publishers; B. Idzikowski; P. Svec; M. Miglierini (eds.), 199-207 (2005)

2004

G. Alcala, S. Mato, S. Deledda, M. Knieps, U. Hangen, J. Eckert, A. Gebert, L. Schultz: Nano-mechanical study of mechanically alloyed Zr-Cu-Al-Ni glass composite containing second-phase ZrC particles, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 343-348 (2004)

J. Bednarcik, S. Roth, J. Degmova, P. Kollar, J. Eckert: Hot pressed Co-based soft magnetic bulk materials, in: 16. Soft Magnetic Material Conference, Duesseldorf, 9.-12.9.03, Proceedings, Vol. 2, D. Raabe (ed.), 537-541 (2004)

H. Breitzke, K. Lueders, S. Scudino, J. Eckert, U. Kuehn: Medium-range order and crystallization in Zr59Cu20Al10Ni8Ti3 and Zr57Cu20Al10Ni8Ti5 metallic glasses investigated by NMR, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 57-62 (2004)

J. Degmova, S. Roth, J. Eckert, H. Grahl, L. Schultz: Magnetic properties of bulk amorphous FeAlGaPCBSi samples prepared by ball-milling and subsequent hot pressing, in: 16. Soft Magnetic Material Conference, Duesseldorf, 9.-12.9.03, Proceedings, Vol. 1, D. Raabe (ed.), 269-274 (2004)

U. Gaitzsch, M. Stoica, A. Gebert, S. Roth, J. Eckert, L. Schultz: Electrochemical behavior and magnetic properties of the bulk amorphous Fe65.5Cr4Mo4Ga4P12C5B5.5 alloy, in: 16. Soft Magnetic Material Conference, Duesseldorf, 9.-12.9.03, Proceedings, Vol. 2, D. Raabe (ed.), 579-584 (2004)

A. Gebert, U.K. Mudali, J. Eckert, L. Schultz: Electrochemical reactivity of zirconium-based bulk metallic glasses, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 369-379 (2004)

H. Grahl, S. Roth, R. Schaefer, J. Eckert, L. Schultz: Magnetic properties and domain patterns of bulk amorphous FeAlGaPCBSi rods prepeared by centrifugal casting, in: 16. Soft Magnetic Material Conference, Duesseldorf, 9.-12.9.03, Proceedings, Vol. 2, D. Raabe (ed.), 597-602 (2004)

A. Handstein, J. Eckert, C. Fischer, G. Fuchs, O. Gutfleisch, W. Haessler, D. Hinz, B. Holzapfel, V. Narozhnyi, K. Nenkov, O. Perner, K.-H. Mueller, L. Schultz: Critical currents in bulk MgB2 superconductors, Processing and Fabrication of Advanced Materials XII, Pittsburgh/USA, 13.-15.10.2003, in: Proceedings, T.S. Srivatsan; R.A. Varin (eds.), 3-19 (2004)

G. Kumar, J. Eckert, W. Loeser, P. Schilling, E. Ma, C. Mickel, L. Schultz: TEM and XAS characterization of hard magnetic phase in Nd-Fe alloys, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 257-262 (2004)

N. Mattern, U. Kuehn, J. Sakowski, J. Neuefeind, J. Eckert: Structure of Zr52Ti5Cu18Ni15Al10 bulk metallic glass at elevated temperatures, in: Materials Science Forum ; Trans Tech Publications, 443-444, 227-230 (2004)

N. Radtke, J. Eckert, U. Kuehn, M. Stoica, L. Schultz: Microstructure, thermal stability and mechanical properties of slowly cooled Zr-based composites containing dendritic bcc phase precipitates, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 189-194 (2004)

E.A. Rozhkova, X.Y. Yang, P.B. Wheelock, J. Eckert, U. Kuehn, D.J. Sordelet: Formation of high-strength Zr-Nb-Cu-Ni-Al alloys by warm extrusion of gas atomized powders, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 127-132 (2004)

S. Scudino, J. Eckert, U. Kuehn, H. Breitzke, K. Lueders, L. Schultz: Influence of Al on quasicrystal formation in Zr-Ti-Nb-Cu-Ni-Al metallic glasses, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 83-88 (2004)

M. Stoica, N. Radtke, J. Eckert, S. Roth, G. Alcala, A. Gebert, L. Schultz, Wei Hua Wang, Yan Hui Zhao: Mechanical behavior of bulk glassy Fe65.5Cr4Mo4Ga4P12C5B5.5, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 349-354 (2004)

M. Stoica, S. Roth, J. Eckert, L. Schultz: Magnetic properties of bulk amorphous Fe-Cr-Mo-Ga-P-C-B alloys obtained by different techniques, in: 16. Soft Magnetic Material Conference, Duesseldorf, 9.-12.9.03, Proceedings, Vol. 2, D. Raabe (ed.), 681-686 (2004)

T.G. Woodcock, S. Mato, G. Alcala, G. He, Y. Wang, E. Ma, Q. Dai, M. Sui, W. Loeser, J. Eckert, L. Schultz: Microstructure of Ti-based, dendrite/nanostructured-matrix composites, Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA, in: MRS Symposium Proceedings; 806, 355-359 (2004)

2003

B.S. Sundar Daniel, M. Heilmaier, B. Bartusch, J. Kanzow, K. Guenther-Schade, K. Raetzke, J. Eckert, F. Faupel: Free volume evolution in bulk metallic glass during high temperature creep, MRS Fall Meeting Boston/USA, 2.-6.12.02, in: MRS Symposium Proceedings, 754, 396-401 (2003)

S. Deledda, J. Eckert, L. Schultz: Crystallization behavior of mechanically alloyed Zr-Cu-Al-Ni glass composites containing second-phase ZrC particles, MRS Fall Meeting Boston/USA, 2.-6.12.02, in: MRS Symposium Proceedings, 754, 385-390 (2003)

J. Eckert, U. Kuehn, N. Mattern, N. Radtke: Bulk metallic glass-based composites with different size of second phase particles, Processing and Fabrication of Advanced Materials XI, Columbus/USA, 7.-10.10.02, in: Proceedings; T.S.Srivatsan; R.A.Varin (eds.), 465-479 (2003)

J. Eckert, O. Perner, G. Fuchs, K. Nenkov, K.-H. Mueller, W. Haessler, C. Fischer, B. Holzapfel, L. Schultz: High critical fields and currents in mechanically alloyed MgB2, DPG-Fruehjahrstagung, Dresden, 24.-28.3.03, in: Advances in Solid State Physics, Kramer, B. (ed.), Springer-Verl., 43, 703-719 (2003)

U. Kuehn, J. Eckert, N. Mattern, N. Radtke, L. Schultz: Microstructure and mechanical properties of slowly cooled Zr66.4Nb6.4Cu10.5Ni8.7Al8.0 with ductile bcc phase, MRS Fall Meeting Boston/USA, 2.-6.12.02, in: MRS Symposium Proceedings, 754, 333-338 (2003)

N. Mattern, J. Sakowski, A. Concustell, P. Jovan, M.D. Baro, J. Eckert: In situ X-ray diffraction investigation of the crystallization of Cu60Ti20Zr20 bulk metallic glass, in: Jahresbericht des HASYLAB am Deutschen Elektronen-Synchrotron DESY, Hamburg, 627-628 (2003)

2002

P. Crespo, P. Marin, P. Agudo, M.C. Alocen, A. Hernando, A. Garcia-Escorial, J. Eckert, S. Roth, L. Schultz: Mechanically alloyed (Fe0.5Cu0.5)100-xZrx alloys, ISMANAM 2001, Ann Arbor/USA, 24.-29.6.01, in: Proceedings, Materials Science Forum, 386-388, 175-180 (2002)

S. Deledda, J. Eckert, L. Schultz: Viscosity of mechanically alloyed amorphous Zr-Cu-Al-Ni matrix composites in the supercooled liquid region, ISMANAM 2001, Ann Arbor/USA, 24.-29.6.01, in: Proceedings, Materials Science Forum, 386-388, 71-76 (2002)

J. Eckert, F. Schurack, I. Boerner: High strength nanostructured aluminum alloys based on quasicrystalline or amorphous phase, "Processing and Fabrication of Advanced Materials X", Indianapolis/USA, 5.-8.11.01, in: Proceedings, ASM International, 19-32 (2002)

J. Eckert: Structure formation and mechanical behavior of two-phase nanostructured materials, in: C.C. Koch (ed.) "Nanostructured Materials: Processing, properties and potential applications", Noyes Publications, William Andrew Publishing, Norwich, New York, U.S.A., 423-525 (2002)

M. Heilmaier, U. Grundmann, H. Saage, J. Eckert: Novel oxide dispersion strengthened alloys produced by mechanical milling, "Processing and Fabrication of Advanced Materials X, Indianapolis/USA, 5.-8.11.01, in: Proceedings, ASM International, 241-253 (2002)

S. Roth, M. Stoica, J. Degmova, H. Grahl, J. Eckert, L. Schultz: Measurements of soft magnetic properties of iron-based bulk amorphous alloys, Seventh International Workshop on 1&2-Dimensional Magnetic Measurement and Testing, Luedenscheid,16.-17.9.02, in: Proceedings, J. Sievert (ed.); Report Series of the Physikalisch-Technische Bundesanstalt Braunschweig; PTB-E-81, 31-36 (2002)

R. Sato Turtelli, D. Triyono, R. Groessinger, K.R. Pirota, M. Knobel, P. Kerschl, J. Eckert, S. Kato: Temperature dependence of the magnetic relaxation of Nd60Fe30Al10 and Nd60Fe20Co10Al10 Alloys, XVIIth International Workshop on Rare-Earth Magnets and their Applications, Newark,Delaware/USA, 18.-22.8.02, in: Proceedings, G.C.Hadjipanayis and M.J.Bonder (ed.), Rinton Press Princeton, 161-168 (2002)

Z.F. Zhang, Z.G. Wang, J. Eckert, L. Schultz: Fatigue cracking behavior of a special copper bicrystal with common primary slip plane, Eighth International Fatigue Congress, Stockholm/Schweden, 3.-7.6.02, in: "Fatigue 2002", Proceedings, EMAS, U.K., 3, 1649-1656 (2002)

2001

B.S.S. Daniel, M. Heilmaier, A. Reger-Leonhard, J. Eckert, L. Schultz: On the high temperature creep and relaxation behaviour of Zr-based bulk metallic glasses, Symposium der Materials Research Society, Boston/USA, 27.-30.11.00, in: "Supercooled liquid, bulk glassy and nanocrystalline states of alloys", ed. A. Inoue, A.R. Yavari, W.L. Johnson, R.H. Dauskardt: Symposium Proceedings, 644, L10.7.1-6 (2001)

G. David, S. Roth, J. Eckert, L. Schultz: Extraction of boron Fe80B20 ribbons by annealing under hydrogen flow, THERMEC 2000, Las Vegas/USA, 4.-8.12.00, in: Proceedings of the International Conference on Processing and Manufacturing of Advanced Materials: CDROM, Section D3 (6 p.); Special Issue: Journal of Materials Processing Technology, Eds. T.Chandra, K.Higashi, C.Suryanarayana, C.Tome, Elsevier Science, 117/3 (2001)

J. Eckert, U. Kuehn, U. Wolff, A. Gebert: Synthesis and properties of amorphous and quasicrystalline Zr-Ti/Nb-Al-Cu-Ni alloys, The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), Honolulu/USA, 11.-15.12.01, in: Proceedings, S. Hanada, Z. Zhong, S.W. Nam, R.N. Wright, The Japan Institute of Metals, I, 103-106 (2001)

A. Gebert, U. Wolff, M. Savyak, J. Eckert, L. Schultz: Stability and electrochemical properties of Mg65Y10Cu25 metallic glass, 6th International Symposium on Chemical and Electrochemical Reactivity of Amorphous and Nanocrystalline Materials, Quebec/Kanada, 7.-9.2.01, in: Proceedings: Materials Science Forum, ed. R. Schulz (special issue: Journal of Metastable and Nanocrystalline Materials vol. 11, 2001), 377, 9-14 (2001)

A. Gebert, U. Wolff, M. Savyak, J. Eckert: Electrochemical properties of bulk glass-forming Mg-based alloys, 7th All-Polish Corrosion Symposium, Poraj/Poland, 21.-23.11.01, in: New Achievements in Corrosion Research and Engineering (in polish), 3-10 (2001)

U. Kuehn, J. Eckert, N. Mattern, L. Schultz: Glass and quasicrystal formation in a Zr-based multicomponent alloy, Symposium der Materials Research Society, Boston/USA, 27.-30.11.00, in: "Supercooled liquid, bulk glassy and nanocrystalline states of alloys", ed. A. Inoue, A.R. Yavari, W.L. Johnson, R.H. Dauskardt: Symposium Proceedings, 644, L12.8.1-6 (2001)

G. Kumar, J. Eckert, L.Q. Xing, A. Gueth, S. Roth, W. Loeser, S. Ram: Effect of preparation on glass formation and magnetic properties of Nd-Fe-Co-Al-B alloys, Symposium der Materials Research Society, Boston/USA, 27.-30.11.00, in: "Supercooled liquid, bulk glassy and nanocrystalline states of alloys", ed. A. Inoue, A.R. Yavari, W.L. Johnson, R.H. Dauskardt: Symposium Proceedings, 644, L12.14.1-6 (2001)

G. Kumar, J. Eckert, S. Roth, W. Loeser, L. Schultz, S. Ram: Formation of cluster structure and phase separation in cast Nd-Fe-Co-Al alloys, 22nd Risoe International Symposium on Materials Science, Roskilde/Daenemark, 3.-7.9.01, in: "Science of Metastable and Nanocrystalline Alloys", ed. A.R.Dinesen u.a., Risoe National Laboratory, 307-312 (2001)

N. Mattern, J. Neuefeind, U. Kuehn, M. Zinkevitch, H. Hermann, J. Eckert: Short-range order and crystallization behvior of Zr-based bulk amorphous alloys, THERMEC 2000, Las Vegas/USA, 4.-8.12.00, in: Proceedings of the International Conference on Processing and Manufacturing of Advanced Materials; CDROM, Section D3 (6 p.), Special Issue: Journal of Materials Processing Technology, Eds. T.Chandra, K.Higashi, C.Suryanarayana, C.Tome, Elsevier Science, 117/3 (2001)

N. Mattern, J. Sakowski, U. Kuehn, H. Herms, U. Precht, J. Neuefeind, J. Eckert: Structure of glassy, supercooled liquid and liquid Zr52Ti5Cu18Ni15Al10, in: Jahresbericht des HASYLAB am Deutschen Elektronen-Synchrotron DESY, Hamburg, 581-582 (2001)

N. Mattern, U. Kuehn, J. Eckert: Structure formation and crystallization of Zr62-xTixAl10Cu20Ni8 bulk metallic glasses, 22nd Risoe International Symposium on Materials Science, Roskilde/Daenemark, 3.-7.9.01 , in: "Science of Metastable and Nanocrystalline Alloys", ed. A.R.Dinesen u.a., Risoe National Laboratory, 323-328 (2001)

F. Schurack, J. Eckert, L. Schultz: Processing and mechanical properties of quasicrystal-reinforced Al alloys, Symposium "Quasicrystals - Preparation, Properties and Applications", Boston/USA, 27.-30.11.00, in: MRS Symposium Proceedings, Belin-Ferré, E.; Thiel, P.A.Tsai, A.-P.; Urban, K.(ed), 643, K9.11.1-6 (2001)

U. Wolff, A. Gebert, M. Savyak, J. Eckert, L. Schultz: Stability and electrochemical properties of Mg65Y10Cu25 metallic glass, 22nd Risoe International Symposium on Materials Science, Roskilde/Daenemark, 3.-7.9.01, in: "Science of Metastable and Nanocrystalline Alloys", ed. A.R.Dinesen u.a., Risoe National Laboratory, 441-447 (2001)

1999

K. Buchholz, A. Gebert, K. Mummert, J. Eckert, L. Schultz: Investigations on the electrochemical behavior of Zr-Al-Cu-Ni bulk metallic glass, Symposium der Materials Research Society, Boston/USA, 1.-3.12.98, in: Materials Research Society Symposium Proceedings "Bulk Metallic Glasses", Warrendale, 554, 161-166 (1999)

J. Eckert: Mechanical alloying of bulk metallic glass forming systems, ISMANAM'98, Wollongong/Australien, 7.-12.12.98, in: Materials Science Forum, 312-314, 3-12 (1999)

A. Guembel, L. Ledig, D. Hough, C.-G. Oertel, W. Skrotzki, J. Eckert, L. Schultz: Mechanically attritioned superconducting Y-TM borocarbides (TM= Ni, Pd), ISMANAM'98, Wollongong/Australien, 7.-12.12.98, in: Materials Science Forum, 312-314, 61-66 (1999)

W. Hoffmann, M. Baenitz, K. Lueders, A. Gebert, J. Eckert, L. Schultz: NMR investigations of the bulk metallic glass Zr55Cu30Al10Ni5, Symposium der Materials Research Society, Boston/USA, 1.-3.12.98, in: Materials Research Society Symposium Proceedings "Bulk Metallic Glasses", Warrendale, 554, 95-100 (1999)

L. Ledig, D. Hough, C.-G. Oertel, J. Eckert, W. Skrotzki: Phase formation, stability and superconducting properties of mechanically alloyed yttrium-nickel-borocarbides, Symposium "Solid-State Chemistry of Inorganic Materials II", Boston/USA, 30.11.-4.12.98, in: Materials Research Society, Warrendale, 547, 463-468 (1999)

A. Leonhard, M. Heilmaier, J. Eckert, L. Schultz: Creep behavior of bulk amorphous and partially crystalline Zr-base alloys, TMS Annual Meeting, San Diego/USA, 28.2.-4.3.99, in: Creep Behavior of Advanced Materials for the 21st Century, 41-50 (1999)

A. Leonhard, M. Heilmaier, J. Eckert, L. Schultz: Deformation behavior of bulk amorphous Zr-base alloys, Symposium der Materials Research Society, Boston/USA, 1.-3.12.98, in: Materials Research Society Symposium Proceedings "Bulk Metallic Glasses", Warrendale, 554, 137-142 (1999)

M. Leonhardt, H.-G. Lindenkreuz, W. Loeser, J. Eckert: Metastable phase formation and microstructure evolution from undercooled eutectic melts, ISMANAM'98, Wollongong/Australien, 7.-12.12.98, in: Materials Science Forum, 312-314, 275-280 (1999)

H. Saage, M. Heilmaier, J. Eckert, L. Schultz: Microstructural evaluation during mechanical milling and consolidation of ODS L12-(Al, Cr)3 Ti, MRS Fall Meeting, Boston/USA, 29.11.-4.12.98, in: MRS Symposium Proceedings, 552, KK8.34.1-KK8.34.7 (1999)

F. Schurack, I. Boerner, J. Eckert, L. Schultz: Synthesis and properties of mechanically alloyed and ball milled high strength amorphous or quasicrystalline Al alloys, ISMANAM'98, Wollongong/Australien, 7.-12.12.98, in: Materials Science Forum, 312-314, 49-54 (1999)

1998

J. Eckert, N. Schlorke, L. Schultz: Mg-based lightweight alloys prepared by mechanical attrition and consolidation in the viscous state, Powder Metallurgy World Congress, Granada/Spanien, 10/98, in: Proceedings, vol. 1, 311-316 (1998)

A. Gebert, J. Eckert, H.-D. Bauer, L. Schultz: Characteristics of slowly cooled Zr-Al-Cu-Ni bulk samples with different oxygen content, ISMANAM'97, Sitges/Spanien, Aug/Sept. 1997, in: Materials Science Forum, 269-272 , 797-802 (1998)

A. Kuebler, J. Eckert, A. Kirchner, L. Schultz: Thermal stability and consolidation behavior of mechanically alloyed Zr-Al-Cu-Ni powders with varying oxygen, iron and tungsten content, ISMANAM'97, Sitges, Spanien, Aug/Sept. 1997, in: Materials Science Forum, 269-272 (1998), 767-772 (1998)

R. Lin, M. Seidel, J.Z. Jiang, J. Eckert: Structural properties and thermal stability of glassy (Zr.65Al.075Cu.175Ni.1)100-xFex (x<20) alloys prepared by mechanical alloying, ISMANAM'97, Sitges, Spanien, Aug/Sept. 1997, in: Materials Science Forum, 269-272 (1998), 461-466 (1998)

N. Schlorke, J. Eckert, L. Schultz: Formation and stability of bulk metallic glass forming Mg-Y-Cu alloys produced by mechanical alloying and rapid quenching, ISMANAM'97, Sitges, Spanien, Aug/Sept. 1997, in: Materials Science Forum, 269-272 (1998), 761-766 (1998)

N. Schlorke, J. Eckert, L. Schultz: Synthesis and properties of bulk metallic Mg-Y-Cu lightweight alloys produced by mechanical alloying and rapid quenching, Conference on Magnesium Alloys and Their Applications, Wolfsburg, 4/98, in: Proceedings, Werkstoff-Informationsgesellschaft, Frankfurt/M, 533 (1998)

C. Stiller, E. Wu, S.J. Campbell, A. Kerr, W.A. Kaczmarek, J.S. Williams, J. Eckert, L. Schultz: Mechanically alloyed and rapidly quenched Fe-Zr-B-Cu: Moessbauer investigation, ISMANAM'97, Sitges/Spanien, Aug/Sept. 1997, in: Materials Science Forum, 269-272 , 425-430 (1998)

L.Q. Xing, M. Cornet, J. Eckert: Nanostructural transformation and mechanical property variation of Zr-Ti-Al-Cu-Ni bulk amorphous alloys, International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials "ISMANAM'97", Sitges/Spanien, Aug/Sept. 97 , in: Materials Science Forum, 269-272, 785-790 (1998)

1997

I. Boerner, J. Eckert: Grain-size effects and consolidation in ball-milled nanocrystalline NiAl, Synthesis and properties of mechanically alloyed and nanocrystalline materials-ISMANAM-96, in: Materials Science Forum, 235-238 Pt1&2, 79-84 (1997)

I. Boerner, J. Eckert: Nanostructure formation in ball-milled iron powders, Journées d'Automne, SF2M, Paris, 25.-27.11.97, in: La Revue de Métallurgie SF2M-JA97, 124 (1997)

L.C. Damonte, L. Mendoza-Zelis, F.H. Sánchez, J. Eckert: Aleaciones amorfas metálicas con uno amplia région de liquido sobreendriado preparadas por aleado mecánico, Annual Meeting Asociacion Fisica Argentina, Tandil, Dez. 96, in: Proceedings (1997)

J. Eckert, N. Mattern, M. Seidel, L. Schultz: The effect of iron and oxygen additions on the properties of Zr-Al-Cu-Ni bulk metallic glass forming alloys, Structure and dynamics of glasses and glass formers, in: Materials Research Society Symposium Proceedings, 455, 465-470 (1997)

J. Eckert, M. Seidel, N. Schlorke, A. Kuebler, L. Schultz: Solid-state processing of bulk metallic-glass forming alloys, Synthesis and properties of mechanically alloyed and nanocrystalline materials - ISMANAM-96, in: Materials Science Forum, 235-238 Pt 1&2, 23-28 (1997)

J. Eckert, K. Jost, O. de Haas, L. Schultz: Phase formation and properties in mechanically alloyed and ball-milled Re-TM-borocarbides, Synthesis and properties of mechanically alloyed and nanocrystalline materials-ISMANAM-96, in: Materials Science Forum, 235-238 Pt1&2, 133-138 (1997)

J. Eckert: Mechanical alloying of advanced materials, IWCC Technical Seminar, Singapore, 21.-24.10.97, in: Proceedings (1997)

J. Eckert: Solid state processing of nanomaterials, Journées d'Automne, SF2M, Paris, 25.-27.11.97, in: La Revue de Métallurgie SF2M-JA97, 42 (1997)

J. Eckert, N. Schlorke, C.A.R.T. Miranda, L. Schultz: Phase formation and properties of mechanically alloyed Mg-based multicomponent lightweight alloys, TMS Annual Meeting, Orlando, Florida, 9.-13.2.1997, in: Synthesis/Processing of Lightweight Metallic Materials II, ed. by C.M.Ward-Close u.a., 383-394 (1997)

N. Schlorke, J. Eckert, L. Schultz: Formation and properties of amorphous and nanocrystalline phases in mechanically alloyed Fe-based multicomponent alloys, Structure and dynamics of glasses and glass formers, in: Materials Research Society Symposium Conference Proceedings, 455, 507-512 (1997)

N. Schlorke, J. Eckert, L. Schultz: Bulk Mg-based glasses with nanocrystalline dispersions prepared by mechanical alloying and consolidation in the viscous state, Journées d'Automne, SF2M, Paris, 25.-27.11.97, in: La Revue Metallurgie SF2M-JA97, 45 (1997)

M. Seidel, J. Eckert, L. Schultz: The effect of milling conditions and impurities on the properties of mechanically alloyed Zr-based metallic glasses with wide supercooled liquid region, Synthesis and properties of mechanically alloyed and nanocrystalline materials-ISMANAM-96, in: Materials Science Forum, 235-238 Pt1&2, 29-34 (1997)

C. Stiller, J. Eckert, R. Schaefer, S. Roth, L. Schultz: The influence of processing conditions on the microstructure and the magnetic properties of Fe-Zr-Cu-(B)-based alloys prepared by mechanical attrition, Synthesis and properties of mechanically alloyed and nanocrystalline materials-ISMANAM-96, in: Materials Science Forum, 235-238, 777-782 (1997)

1996

I. Boerner, J. Eckert: Structural properties and compositional dependence of grain size in heavily mechanically deformed nanophase NiAl, in: Materials Science Forum , 225-227, 377 (1996)

J. Eckert, M. Seidel, L. Schultz: Bulk metallic glasses with significant supercooled liquid region prepared by mechanical alloying, in: Materials Science Forum, 225-227, 113 (1996)

M. Seidel, J. Eckert, H.-D. Bauer, L. Schultz: Mechanically alloyed Zr-based metallic glasses with significant supercooled liquid region, in: Materials Science Forum, 225-227, 119 (1996)

C. Stiller, J. Eckert, S. Roth, R. Schaefer, U. Klement, L. Schultz: The influence of alloy composition and thermal treatment on structural and magnetic properties of mechanically alloyed Fe-transition metal-based alloys, in: Materials Science Forum, 225-227, 695-700 (1996)

Invited talks

2016

M. Calin, M. Boenisch, A. Helth, S. Pilz, L. Giebeler, A. Gebert, W. Skrotzki, J. Eckert: Thermal stability and structural characteristics of metastable beta-type Ti-Nb alloys for implant applications, TMS 2016, Nashville/USA, 16.-18.2.16 (2016)

M. Calin, M. Boenisch, S. Pilz, S. Bera, A. Gebert, J. Eckert: Property optimization of Ti-based biomaterials by structural design, Conference "Diaspora si prietenii 2016", Timisoara/ Romania, 24.-28.4.16 (2016)

M. Calin, M. Boenisch, A. Helth, S. Pilz, R. Schmidt, A. Gebert, T. Waitz, M. Zehetbauer, J. Eckert: Nanostructured SPD-processed Ti-based materials for load-bearing orthopaedic applications, THERMEC 2016, Graz/Austria, 29.5-3.6.16 (2016)

M. Calin, S. Bera, R. Parthiban, N. Zhang, M. Stoica, J. Eckert: Effect of 'soft' atoms (Ga, In) on glass formation and mechanical behavior of Ni-free Ti-based bulk metallic glasses, ISMANAM 2016, Nara/Japan, 3.-8.7.16 (2016)

J. Eckert, R.N. Shahid, P. Wang, K.G. Prashanth, M. Stoica, D. Zhang: Bulk processing of nanostructured advanced materials, TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16 (2016)

T. Gustmann, J.M. dos Santos, A. Neves, U. Kuehn, P. Gargarella, C.S. Kiminami, C. Bolfarini, W.J. Botta, J. Eckert, S. Pauly: Fabrication of Cu-based Shape-Memory Parts by Selective Laser Melting, Fraunhofer Direct Digital Manufacturing Conference (DDMC) 2016, Berlin/ Germany, 16.-17.3.16 (2016)

J.K. Hufenbach, H. Wendrock, J. Sander, J. Zeisig, L. Giebeler, J. Eckert, U. Kuehn: Entwicklung hochfester Stahlgusslegierungen, Spezialseminar an der Technischen Universitaet Bergakademie Freiberg, Freiberg/ Germany, 6.6.16 (2016)

J. Hufenbach, J. Zeisig, J. Sander, H. Wendrock, L. Giebeler, J. Eckert, U. Kuehn: Entwicklung hochfester Stahlgusslegierungen, Seminars des Instituts für Strukturphysik der TU Dresden, Dresden/ Germany, 26.1.16 (2016)

I. Kaban, L. Xi, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert: Wettability and interfacial interactions between TiB2 ceramic and Ni-Al melts, 9th International Conference on High Temperature Ceramic Mat, Toronto/ Canada, 26.6.-1.7.16 (2016)

J.J. Kruzic, B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert: Designed Heterogeneities Improve the Fracture Reliability of a Zr-based Bulk Metallic Glass, TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16 (2016)

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, J. Wright, J. Eckert: Influence of small Cu addition on the crystallization behavior of soft magnetic FeCoBSiNb bulk metallic glass, THERMEC’2016, International Conference on Processing & Manufacturing of Advanced Materiales: Processing, Fabrication, Properties, Applications, Graz/ Austria, 29.5.-3.6.16 (2016)

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert: FeCoSiBNbCu Bulk Metallic Glass with Compressive Deformability, TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16 (2016)

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, D. Sopu, B. Sarac, D. Ehinger, D. Geißler, J. Eckert: Structural modifications of Fe-based BMGs induced by thermal cycling studied by mean of in-situ X-ray diffraction, 23rd International Symposium on Metastable, Amorphous and Na, Nara/ Japan, 3.-8.7.16 (2016)

2015

M. Boenisch, A. Panigrahi, M. Calin, F. Senftleben, M. Stoica, M. Zehetbauer, T. Waitz, W. Skrotzki, J. Eckert: Selected aspects relating to the martensitic transformations in Ti-Nb alloys, BioTiNet Workshop, Universitaet Wien, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, A. Gebert, F.P. Gostin, A. Helth, M. Boenisch, S. Pilz, R. Schmidt, U. Hempel, M. Zehetbauer, J. Eckert: Tailoring the microstructures and surfaces of metastable Ti-based alloys at the nano-scale for implant applications, 1st. International Symposium on Physics of Surfaces and Interfaces, from Fundamentals to Sustainable Applications (SIPS 2015), Antalya/ Turkey, 4.-9.10.15 (2015)

M. Calin, A. Gebert, S. Abdi, A. Helth, S. Pilz, J. Eckert: Property optimization of Ti-based biomaterials by structural design, Colloquium of Materials Science and Enginerring Faculty, University Politehnica Bucharest, Bucharest/ Romania, 11.-12.11.15 (2015)

M. Calin, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Ti-based glassy alloys as prospective biomaterials, Workshop BioTiNet, University of Vienna, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, M. Boenisch, A. Helth, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel Ti-Based Metastable Alloys for Biomedical Applications, The 9th International Conference on Materials Science & Engineering - Bramat 2015, Brasov/ Romania, 5.-7.3.15 (2015)

M. Calin, S. Abdi, N. Zheng, F.P. Gostin, A. Gebert, J. Eckert: Compositional-induced structural change and deformation behavior of glassy Ti-Zr-based alloys with potential for biomedical applications, 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15 (2015)

J. Eckert, K.G. Prashanth, S. Scudino, M. Stoica, S. Pauly, U. Kuehn: Selective Laser Melting of Metallic Glasses, The Minerals, Metals and Materials Society Annual Meeting 2015 (TMS 2015), Orlando/ USA, 15.-19.3.15 (2015)

A. Gebert, S. Horn, R. Sueptitz, P.F. Gostin, M. Stoica, J. Eckert, M. Uhlemann: Electrochemical micromachining of bulk metallic glasses, 227th Electrochemical Society Meeting (ECS), Chicago/ USA, 25.-28.5.15 (2015)

A. Gebert, S. Horn, R. Sueptitz, M. Stoica, J. Eckert, M. Uhlemann: Electrochemical micromachining of passive Fe-based bulk metallic glasses, TMS Annual Meeting 2015, Orlando/ USA, 15.-19.3.15 (2015)

T. Gustmann, U. Kuehn, S. Pauly, J. Eckert, P. Gargarella, C.S. Kiminami, C. Bolfarini: Selektives Laserstrahlschmelzen von kupferbasierten Formgedaechtnislegierungen, Symposium zum 3D-Druck, Erding/ Germany, 14.-15.10.15 (2015)

J. Hufenbach, U. Kuehn, J. Eckert: Development of high-strength iron-based alloys for tooling applications, Korea Institute for Rare Metals, Korea Institute of Industrial Technology, Incheon/ South Korea, 22.4.15 (2015)

H. Schwab, U. Kuehn, F. Palm, J. Eckert: Selektives Laserstrahlschmelzen der Legierung Ti-5553: Chancen und Herausforderungen, Werkstoffwoche 2015: "Werkstoffe der Zukunft", Dresden/ Germany, 14.-17.9.15 (2015)

H. Schwab, J. Eckert, F. Palm, U. Kuehn: Selektives Laserstrahlschmelzen von Titanlegierungen - Herausforderungen und Perspektiven, Symposium zum 3D-Druck, Erding/ Germany, 14.-15.10.15 (2015) (2015)

S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, G. Vaughan, U. Kuehn, J. Eckert: Strain Analysis of Plastically-deformed Bulk Metallic Glasses, 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15 (2015)

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert: (Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties, 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15 (2015)

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert: (Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties, Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Munich/ Germany, 10.-11.7.15 (2015)

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert: Structure evolution and soft magnetic properties of Cu-free and Cu-added Fe-Co-B-Si-Nb BMGs, Advanced Materials and Structures AMS'15, Timisoara/ Romania, 16.-17.10.15 (2015)

2014

M. Boenisch, M. Calin, A. Panigrahi, T. Waitz, M. Zehetbauer, A. Helth, A. Gebert, L. Giebeler, J. van Humbeeck, W. Skrotzki, J. Eckert: Displacive and diffusional phase transformations in Ti-Nb alloys, Seminar, Forschungsgruppe Physik funktioneller Materialien, Universitaet Wien, Wien/ Oesterreich, 10.3.14 (2014)

M. Calin, N. Zheng, S. Abdi, M. Boenisch, A. Helth, M.D. Baro, F.P. Gostin, A. Gebert, J. Eckert: Design of biocompatible Ti-based amorphous alloys for implant applications, The 15th International Conference of Rapidly Quenched & Metastable Materials (RQ 15 ), Shanghai/ China, 24.-28.8.14 (2014)

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, N. Zheng, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel metastable Ti-based structures for orthopedic applications, Internation Conference ROMAT 2014, Bukarest/ Rumaenien, 15.-17.10.14 (2014)

J. Eckert: Tailoring structure formation and mechanical properties of nanomaterials, 14th International Symposium on Plasticity and Its Current Applications (Plasticity '14), Freeport/ Bahamas, 7.1.14 (2014)

J. Eckert: Improving the deformability of metallic glasses and composites, 10th International Conference on Bulk Metallic Glasses (BMG X), Shanghai/ PR China, 4.6.14. (2014)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen, Materialwissenschaftliches Kolloqium, Montanuniversitaet Leoben and Erich-Schmid Institut fuer Materialwissenschaft der Oesterreichischen Akademie der Wissenschaften, Leoben/ Oesterreich, 10.6.14 (2014)

J. Eckert: Improving the ductility of bulk metallic glasses by mechanical treatment, Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14 (2014)

J. Eckert: High-strength ultrafine-grained materials with enhanced deformability, 15th International Conference on Rapidly Quenched and Metastable Materials (RQ 15), Shanghai/ PR China, 26.8.14 (2014)

J. Eckert: Complex metallic materials with hierarchical hybrid structures: Tailoring metastable phases for engineering applications, Materials Science and Engineering Congress (MSE 2014), Darmstadt, 25.9.14 (2014)

J. Eckert: Tailoring structure formation and properties of metastable alloys and composites, Symposium on "Frontiers of Solidification Research", DLR Koeln, 29.9.14 (2014)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen- Modernes Legierungsdesign am Beispiel von metallischen Glaesern und nanostrukturierten Kompositen, Technikwissenschaftliche Klasse der Saechsischen Akademie der Wissenschaften zu Leipzig, Leipzig, 10.10.14 (2014)

J. Eckert: Ductilization of bulk metallic glasses by mechanical treatment, 5th International Conference on Materials Science and Technologies (RoMat 2014), Bukarest/ Rumaenien, 16.10.14 (2014)

J. Eckert, S. Scudino, D. Beitelschmidt, H.S. Shahabi, U. Kuehn, M. Stoica: Ductilization of metallic glasses by mechanical treatment, TMS 2014, The 143rd Annual Meeting and Exhibition, San Diego, California/ USA, 3/2014 (2014)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, E.A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable Ti-based alloys at the nanoscale for biomedical applications, 5th International Conference on Materials Science and Technology, RoMat 2014, Bucharest/ Romania, 15.-17.10.14 (2014)

A. Gebert, A. Helth, K. Zhuravleva, M. Boenisch, P.F. Gostin, S. Oswald, M. Calin, J. Eckert: New Ti-Nb-based alloys for implant applications, Indo-German Workshop: Strategies for Improved Bone Replacement Materials and Orthopeadic Implants- Design- Manufactoring- Technologies, TU Dresden, Universitaetsklinikum Carl Gustav Carus, Dresden, 19.-21.2.14 (2014)

T. Gustmann, U. Kuehn, P. Gargarella, C.S. Kiminami, C. Bolfarini, J. Eckert, S. Pauly: Processing of a Cu-Al-Ni-Mn shape memory alloy by Selective Laser Melting, Materials Science Engineering (MSE) 2014, Darmstadt/ Germany, 23.-25.9.14 (2014)

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert: Compressive behavior of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}99.5Cu0.5 glassy alloy, Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14 (2014)

M. Stoica, J. Eckert: Casting of bulk metallic glasses: Challenges to overcome, The 5th International Conference on Materials Science and Technologies RoMat 2014, Bucharest/ Romania, 10/2014 (2014)

2013

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, S. Abdi, A. Panigrahi, M., Gebert, A. Zehetbauer, J. Eckert: Enhancing the biomechanical capacity of Ti-Nb-based metastable alloys for implant applications, International Conference EUROMAT 2013, Sevilla/ Spain, 8.-13.9.13 (2013)

M. Calin, N. Zheng, A. Helth, M. Boenisch, S. Abdi, A. Gebert, J. Eckert: Titanium-based amorphous alloys as prospective biomaterials, Conference "Advanced Materials and Structures "- AMS 2013, Timisoara/ Romania, 24.-25.10.13 (2013)

M. Calin, N. Zheng, S. Abdi, P.F. Gostin, C. Damm, M.D. Baro, P. Rizzi, A. Gebert, J. Eckert: Biocompatible Ti-based metallic glasses for implant applications, ISMANAM 2013 Conference, Turin/ Italy, 30.6.-5.7.13 (2013)

J. Eckert, K.K. Song, S. Pauly, B.A. Sun, Y. Zhang, R. Li, S. Gorantla, T. Gemming, U. Kuehn: Deformation mechanisms in metastable CuZrAl composites, 2013 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (X)", San Antonio/ USA, 5.3.13 (2013)

J. Eckert: Heterogeneity and phase transformations as ways to tailor the deformability of high-strength metastable materials, China-Germany Workshop on "Microstructure-Driven Design and Performance of Advanced Metals", Shenyang/ PR China, 14.4.13 (2013)

J. Eckert: Application of amorphous alloys: Potential and challenges to overcome, Res Metallica 2013 Workshop on "Amorphous Alloys and Bulk Metallic Glasses", KU Leuven/ Belgien, 8.5.13. (2013)

J. Eckert: Metallic glasses - Structure, properties and perspectives, Kolloquium on "Current Challenges in Materials Physics", Universitaet Goettingen, 24.5.13 (2013)

J. Eckert: Mechanical properties of metallic glasses and composites, 20th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2013), Turin/ Italy, 2.7.13 (2013)

J. Freudenberger, T. Marr, J. Romberg, E. Knauer, D. Seifert, H. Klauss, L. Schultz, U. Martin, H. Watanabe, H. Bauder, J. Scharnweber, C.-G. Oertel, W. Skrotzki, I. Okulov, U. Kuehn, J. Eckert: Damaszen-Technik fuer Verbundwerkstoffe, 4. Dresdner Werkstoffsymposium, Dresden, 18.-19.11.13 (2013)

A. Gebert, R. Sueptitz, M. Uhlemann, J. Eckert: Electrochemical micromachining of bulk metallic glasses, TMS Annual Spring Meeting, San Antonio, Texas/ USA, 3.-7.3.13 (2013)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable beta-type Ti-based alloys at the nano-scale for biomedical applications, ISMANAM 2013, Turin/ Italien, 30.5.-5.6.13 (2013)

T. Gustmann, U. Kuehn, P. Gargarella, C.S. Kiminami, C. Bolfarini, J. Eckert, S. Pauly: Rapid solidification and advanced manufacturing of Cu-based shape memory alloys with complex geometries, BRAGECRIM Meeting 2013, Sao Carlos/Brazil, 30.9.-2.10.13 (2013)

M. Herklotz, F. Scheiba, N.K. Yavuz, D. Wadewitz, M. Hinterstein, A.-C. Dippel, J. Eckert, H. Ehrenberg: In operando / In situ studies on battery materials - capabilities of the beamline P02.1 and recent results, Workshop: Structural and in situ material science at Beamline P02.1 et PETRA III, DESY Hamburg, 12.-13.9.13 (2013)

M. Stoica, I. Kaban, J. Bednarcik, G. Vaughan, J. Eckert: Fe-based bulk metallic glasses with enhanced plastic deformation, The 8th International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2013, Las Vegas/ USA, 2.-6.12.13 (2013)

M. Stoica, A.H. Tagvaei, P. Kollar, J. Fuezer, J. Eckert: FeNiMoPCB and CoFeTaB bulk metallic glasses and composites, preparation and properties, Amorphous and Nanocrystalline Magnetic Materials (ANMM), Sendai/ Japan, 30.9.-4.10.13 (2013)

M. Stoica, J. Bednacik, G. Vaughan, I. Kaban, J. Eckert: Fe-based bulk metallic glasses with enhanced plastic deformation, ISMANAM 2013, Torino/ Italy, 30.6.-5.7.13 (2013)

2012

M. Calin, A. Helth, M. Boenisch, N. Zheng, A. Gebert, J. Eckert: Microstructural design and innovative processing of multicomponent Ti-based alloys for structural applications, Conference: Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania - 'Seeds for the Future', Bukarest/ Rumaenien, 25.-28.9.12 (2012)

M. Calin, N. Zheng, M. Boenisch, A. Helth, A. Gebert, J. Eckert: Strengthening of metastable Ti-based alloys by microstructure design, 4 th International Conference on Materials Science and Technologies ROMAT 2012, Bukarest/ Rumaenien, 17.-19.10.12 (2012)

J. Eckert: Plastic deformation in bulk metallic glasses and composites, 19 th. International Symposium on Metastable Amorphous and Nanostructured Materials (ISMANAM 2012), Moskau/ Russland, 19.6.12 (2012)

J. Eckert, A. Gebert, M. Uhlemann, R. Sueptitz, U. Kuehn, B.S. Kim, M.H. Lee, T. S. Kim: Stability and recycling of rare earth permanent magnets, International Symposium on Novel and Nano Materials (ISNNM 2012), Istanbul/ Tuerkei, 27.8.12 (2012)

J. Eckert, N. Mattern, J.H. Han, J.M. Park, U. Vainio, A. Shariq, D.H. Kim: Phase separated metallic glasses: Microstructure formation and tunning of mechanical properties, 11th. International Conference on Nanostructured Materials (NANO 2012), Rhodos/ Griechenland, 29.8.12 (2012)

J. Eckert, L.C. Zhang, T.B. Sercombe, W. Xu, K. Xia, A. Helth, M. Boenisch, M. Calin, A. Gebert, M. Zehetbauer: Advanced structural design and innovative processing of biocompatible Beta Ti-Nb based alloys, Material Science and Engineering Congress (MSE 2012), Darmstadt, 27.9.12 (2012)

J. Eckert: Ways to improve the plasticity of bulk metallic glass composites, Global Research Laboratory Germany - Korea Workshop on Bulk Metallic Glass and Nanostructured Materials, Seoul National University, Seoul/ Korea, 12.10.12 (2012)

J. Eckert: Structure evolution and plasticity in metallic glasses, 2nd. Sino-German Workshop, Structure and Dynamics of Bulk Metallic Glasses, Koeln, 5.11.12 (2012)

J. Eckert: Bulk metallic glasses and composites: Structure and deformation behavior, Northwestern Polytechnical University, Xi'an/ PR China, 14.12.12 (2012)

J. Eckert: Enhanced tensile ductility of bulk metallic glasses by tailoring atomic order, 9th International Conference on Bulk Metallic Glasses (BMG IX), Xiamen/ PR China, 18.12.12 (2012)

J. Eckert, K.K. Song, S. Pauly, Y. Zhang, P. Gargarella, N.S. Barekar, U. Kuehn, M. Stoica: Formation of B2 CuZr in metastable CuZr-based bulk glass forming alloys, 2012 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (IX)", Orlando/ USA, 13.3.12 (2012)

J. Eckert: Metallic glasses and composites: Structure and deformation behavior, Universitaet Wien, Institut fuer Physik, Wien/ Oesterreich, 26.4.12 (2012)

J. Eckert: Rare metal policy and strategy in Europe - The situation in Germany and at the IFW Dresden, Korean-German Workshop on Rare Metals and 2nd Rare Metal Industry Development Forum, Incheon/ Korea, 8.5.12 (2012)

J. Eckert: Deformation in bulk metallic glasses and composites, 19th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2012), Moskau/ Russland 19.6.12 (2012)

A. Helth, K. Zhuravleva, P.F. Gostin, S. Oswald, A. Gebert, M. Calin, U. Hempel, K.S. Lips, A. Cavalcanti-Adam, J. Eckert: Neue Beta-Ti-Nb Legierungen fuer Hartgewebeimplantatanwendungen, 61. Jahrestagung Norddeutsche Orthopaeden- und Unfallchirurgenvereinigung, Hamburg, 16.6.12 (2012)

A. Kauffmann, J. Freudenberger, J. Pribbenow, V. Klemm, W. Schillinger, V. Subramanya Sarma, J. Eckert, L. Schultz: Tracking the twin formation in cryo-drawn copper, Seminar of the Material Advantage Chapter of IIT, Madras/ Chennai, 27.8.12 (2012)

N. Mattern, J. Han, U. Vainio, A. Shariq, J. Eckert: Phase-separated metallic glasses, ISMANAM Conference 2012, Moskau/ Russland, 18.-22.6.12 (2012)

S. Scudino, H.S. Shahabi, M. Stoica, U. Kuehn, J. Eckert: Enhanced tensile ductility of bulk metallic glasses by customized microstructural heterogeneities, ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12 (2012)

S. Scudino, U. Kuehn, J. Eckert: Mechanical properties of complex metallic alloys, MRS Fall Meeting, Boston/ USA, 25.-30.11.12 (2012)

M. Stoica, A. Seifoddini, R.T. Qu, J.W. Cui, Z.F. Zhang, T. Gemming, N. Mattern, J. Eckert: Ductile (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloy, ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12 (2012)

R. Sueptitz, M. Uhlemann, J. Eckert, A. Gebert: The influence of superimposed magnetic fields on the corrosion behavior of iron, 16th All Polish Corrosion Symposium, Poraj/ Polen, 26.-30.11.12 (2012)

M. Uhlemann, K. Tschulik, G. Mutschke, C. Cierpka, X. Yang, A. Gebert, J. Eckert: Structured electrodeposition in magnetic gradient fields, Interfinish 2012, Milano/ Italy, 14.-16.11.12 (2012)

A. Waske, M. Krautz, A. Moehn, K. Skokov, L. Giebeler, O Gutfleisch, J. Eckert: Magnetocaloric Materials, CMAC-Days Promotional Lecture, Krakau/ Poland, 11.12.12 (2012)

A. Waske, K. Skokov, L. Giebeler, O. Gutfleisch, J. Eckert: The Role of Structural Transitions for Magnetocaloric Cooling, International Symposium on Novel and Nano Materials, Instanbul/ Turkey, 26.8.12 (2012)

2011

M. Calin, N. Zheng, A. Helth, L.C. Zhang, A. Gebert, J. Eckert: Phase transformations and mechanical behavior of glassy/nanostructured Ti-based alloys and their composites, International Conference on Advanced Materials and Structures, Timisoara/ Romania, 27.-28.10.11 (2011)

M. Calin, N. Zheng, A. Helth, F. Gostin, A. Gebert, J. Eckert: Ti-based metallic glasses and composites with improved mechanical properties, Colloquium, Dipartimento di Chimica I.F.M., Universita di Torino, Torino/ Italy, 23.11.11 (2011)

J. Eckert, A. Gebert, U. Kuehn: Rare metal related issues in Germany, 1. International Workshop on Rare Metals, KITECH, KIRAM, Incheon/ Korea, 18.-19.4.11 (2011)

J. Eckert: Ti-base single- and multi-phase alloys for high strength applications, Global Research Laboratory Germany - Korea Workshop on Bulk Metallic Glass and Nanostructured Materials, Lisbon/ Portugal, 25.8.11 (2011)

J. Eckert: Designing ductile and tough bulk metallic glasses and composites, 14th International Conference on Rapidly Quenched and Metastable Materials, Salvador/ Brasil, 2.9.11 (2011)

J. Eckert: Present understanding of the mechanical properties of metallic glasses, Kick-Off-Meeting of the Special Research Area 1594 "Topological Engineering of Ultrastrong Glasses" of the German Science Foundation (DFG), Erlangen, 4.10.11 (2011)

J. Eckert: The role of heterogeneity for tailoring the mechanical properties of advanced metallic materials, 2nd Symposium for the Global Research Laboratory (GRL) Program of Korea, Seoul/ Korea, 22.2.11 (2011)

J. Eckert: Ti-based bulk metallic glasses and composites for structural and functional applications, TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (VIII)", San Diego/ USA, 3.3.11 (2011)

J. Eckert: Phase formation and microstructure development in multicomponent alloys, Hauptvortrag im Rahmen der Fruehjahrstagung der Sektion Kondensierte Materie (SKM) der DPG, Symposium on "Heterogeneous Nucleation and Microstructure Formation: Steps towards a System- and Scale-bridging Understanding", Dresden, 17.3.11 (2011)

J. Eckert: Development of bulk metallic glasses and composites with high plasticity, Shanghai University, School of Materials Science and Engineering, Institute of Materials, Shanghai/ P.R. China, 13.5.11 (2011)

J. Eckert: Correlation between structure and deformation behavior in glassy materials, 8th International Conference on Bulk Metallic Glasses (BMG VIII), Hong Kong/ PR China, 16.5.11 (2011)

J. Eckert: Ways to improve the plasticity of bulk metallic glasses, 2011 Taiwan Tech International Workshop on Metallic Glasses, Taiwan University of Science and Technology, Taipei/ Taiwan, 23.5.11 (2011)

J. Eckert: Hybrid nanostructured materials for structural and functional applications, 18th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2011), Gijon/ Spanien, 28.6.11 (2011)

A. Gebert, J.A. Koza, R. Sueptitz, M. Uhlemann, J. Eckert, L. Schultz: Utilization of electrochemical dissolution processes for micro-machining of bulk metallic glasses, ISMANAM 2011, Gijon/ Spanien, 26.6.-1.7.11 (2011)

A. Gebert, J. Koza, R. Sueptitz, M. Uhlemann, J. Eckert, L. Schultz: Electrochemical micromachining of bulk metallic glasses, International Conference on Rapidly Quenched and Metastable Materials RQ14, Salvador, Bahia/ Brasilien, 28.8.-3.9.11 (2011)

P.F. Gostin, U. Siegel, F. Mayr, J. Romberg, C. Mickel, S. Baunack, S. Oswald, A. Gebert, U. Kuehn, J. Eckert, L. Schultz: Corrosion behaviour of amorphous iron base alloys, Kolloquium, Vacuumschmelze Hanau, 15.9.11 (2011)

A. Kauffmann, J. Freudenberger, D. Geissler, S. Yin, W. Schillinger, V. Subramanya Sarma, H. Bahmanpour, R. Scattergood, M.S. Khoshkhoo, H. Wendrock, C.C. Koch, J. Eckert, L. Schultz: Zwillingsbildung durch Kryoumformung, Seminar des Instituts fuer Werkstoffwissenschaft, TU Bergakademie Freiberg, 14.12.11 (2011)

D. Klemm, L. Loeber, R. Petters, U. Kuehn, J. Eckert: 3D Laserstrahlschmelzen - Anwendung in der Materialwissenschaft und in der Medizintechnik, Institutskolloquium IFOM, Prof. Fuessel, Westsaechsische Hochschule Zwickau, 1.6.11 (2011)

S. Wege, H. Wendrock, J. Eckert: Method for measuring local strains in polycrystals using EBSD or KOSSEL, RMS EBSD Tagung 2011, Duesseldorf, 28.-30.3.11 (2011)

S. Wege, H. Wendrock, J. Eckert: A new concept of strain determination by precision EBSD, Workshop, Leipzig, 1.3.11 (2011)

S. Wege, H. Wendrock, J. Eckert: Method for measuring local strains in polycrystals using EBSD or KOSSEL, RMS EBSD Tagung 2011, Duesseldorf, 28.-30.3.11 (2011)

2010

J. Eckert: Metallische Glaeser und Komposite - Materialdesign fuer neue Hochleistungswerkstoffe, Karlsruher Werkstoffkolloquium, Karlsruhe Institute of Technology, KIT, Karlsruhe, 26.1.10 (2010)

J. Eckert: Metastable metallic materials: Tailoring properties by phase and microstructure design, 11. ZFM-Festkoerpertag 2010, Zentrum fuer Festkoerperchemie und Neue Materialien, Leibniz Universitaet Hannover, 29.1.10 (2010)

J. Eckert: Strengthening of Ti-base glass-forming alloys by microstructure design, 2010 TMS Annual Meeting & Exhibition, Symposium "Bulk Metallic Glasses (VII)", Seattle/ USA, 16.2.10 (2010)

J. Eckert: Materialdesign innovativer metallischer Werkstoffe, Workshop Nanomaterial - BDLI priority program "Eco-efficient Flying", EADS, Ottobrunn, 26.2.10 (2010)

J. Eckert: Structure-property relations in bulk metallic glasses, International Conference on Mechanical Properties of Materials (ICMPM), ), Hangzhou/ China, 27.5.10 (2010)

J. Eckert: Structure-properties relationship in bulk metallic glasses and bulk metallic glass composites, International Workshop on Metallic Glasses, Natl. Taiwan University of Science and Technology, Teipei/ Taiwan, 31.5.10 (2010)

J. Eckert: Bulk metallic glasses and composites: Development of high performance materials by phase and microstructure design, National Central University, Jhongli/ Taiwan, 1.6.10 (2010)

J. Eckert: Plasticity enhancement in bulk metallic glasses, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2010), Zuerich/ Switzerland, 6.-9.7.10 (2010)

J. Eckert: Metallische Glaeser und Komposite - Herstellung, Eigenschaften und Innovationspotenzial, Workshop / Side Event Innovationspotenzial ausgewaehlter neuer Werkstoffe, Materials Science and Engineering Congress (MSE 2010), Darmstadt, 25.8.10 (2010)

J. Eckert: Transformation-mediated plasticity and the role of heterogeneity on improving the deformability of metallic glasses, Sino-German Workshop "Building the Bridge between Physics and Materials Science in Amorphous Metals", Beijing/ China, 13.10.10 (2010)

J. Eckert: Transformation-induced plasticity enhancement in metallic glasses: The role of structure and heterogeneity, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Gangneung/ Korea, 15.10.10 (2010)

J. Eckert: Tuning the structure for enhancing the plasticity of metallic glasses, MRS Fall Meeting, Symposium on Bulk Metallic Glasses and their Applications, Boston/ USA, 2.12.10 (2010)

D. Klemm, U. Kuehn, J. Eckert: Selektives Laserstrahlschmelzen - generative Fertigung 3dimensional komplex gestalteter Formkoerper, MBZ Institutsseminar, Dresden, 19.4.10 (2010)

D. Klemm, R. Taranczewski, V. Hoffmann, U. Kuehn, J. Eckert: 3D Laserstrahlschmelzen – Technologie fuer die generative Fertigung und Anwendung in der Materialforschung, Institutsseminar vom Fraunhofer Institut fuer Werkstoff- und Strahltechnik, Dresden, 26.4.10 (2010)

N. Mattern, U. Vainio, J.M. Park, J.H. Han, A. Shariq, D.H. Kim, J. Eckert: Liquid-liquid phase separation and structure formation of Cu46Zr47-xAl7Gdx metallic glasses, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials ISMANAM 2010, Zurich/ Switzerland, 4.-9.7.10 (2010)

U. Siegel, U. Kuehn, J. Eckert: Metallische Glaeser und Komposite - Herstellung, Eigenschaften und Applikationen, Material Forum des Materials Valley e.V., Vacuum Schmelze Hanau, 15.3.10 (2010)

2009

M. Calin, J. Das, L.-C. Zhang, C. Ghinea, C. Filipoiu, J. Eckert: Strengthening of multi-component Ti-based glass-forming alloys by microstructure design, WPI-Europe Workshop on Metallic Glasses and Related Materials, Grenoble/ France, 25.-28.8.09 (2009)

J. Eckert: Metallische Werkstoffe der Zukunft - schon heute, Forum Neue Technologien, Voith AG, Heidenheim, 15.1.09 (2009)

J. Eckert: Amorphe und nanostrukturierte Materialien als Basis fuer neue Hochleistungswerkstoffe, Institut fuer Werkstofftechnik, Universitaet Bremen, 29.1.09 (2009)

J. Eckert: Structurally inhomogeneous ultrafine and glassy alloys, Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC/ USA, 12.2.09 (2009)

J. Eckert: How to improve the deformability of bulk metallic glasses, 2009 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (VI)", San Francisco/ USA, 18.2.09 (2009)

J. Eckert: Heterostructured ultrafine and glassy alloys - Recent results, design strategies and deformation behavior, WPI-AIMR Annual Workshop 2009, Miyagi-Zao/ Japan, 6.3.09 (2009)

J. Eckert: Grundlagen und Anwendungen metallischer Glaeser und Komposite, VDMA Arbeitskreis Material Roadmap Expertenworkshop, Frankfurt, 3.4.09 (2009)

J. Eckert: Ultrafine and glassy alloys with improved deformability, Korea - Germany Joint Workshop on Amorphous - Nanostructured Materials, Ulsan/ Korea, 27.4.09 (2009)

J. Eckert: Bulk glassy composites: Phase formation and mechanical properties, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Seoul/ Korea, 29.4.09 (2009)

J. Eckert: Materialdesign fuer innovative Werkstoffe mit erweitertem Eigenschaftsspektrum, 13. Dresdner Leichtbausymposium 2009, Dresden, 18.6.09 (2009)

J. Eckert: Bulk metallic glasses and composites with different length-scale heterogeneities, Workshop on Future Directions in Bulk Metallic Glasses, Beijing/ China, 3.7.09 (2009)

J. Eckert: High-strength Al-based alloys and composites, 16th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2009), Beijing/ China, 6.7.09 (2009)

J. Eckert: Phase formation and properties of nanostructured and glassy metallic materials, Universitaet Wien/ Oesterreich, 16.7.09 (2009)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen, Materialwissenschaftliches Kolloqium, Universitaet Stuttgart, 21.7.09 (2009)

J. Eckert: Metallic glasses and composites - Development of high performance materials based on metastable phases, Seminar am Institut fuer Materialphysik im Weltraum, Deutsches Zentrum fuer Luft- und Raumfahrt e.V. (DLR), Koeln, 28.9.09 (2009)

J. Eckert: Processing, mechanical properties and applications of glassy alloys and composites, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), Symposium B13 - "Metallic Glasses", Glasgow/ UK, 8.9.09 (2009)

J. Eckert: Metastabile Phasen - Von den Grundlagen zu Anwendungen, Werkstoffwissenschaftliches Kolloquium, Universitaet Erlangen-Nuernberg, 27.10.09 (2009)

J. Eckert: Bulk metallic glasses and composites: The link between structure and deformability, 7th International Conference on Bulk Metallic Glasses (BMG VII), Busan/ Korea, 3.11.09 (2009)

J. Eckert: Current status of research on amorphous metals, Workshop on Amorphous Metals and Composites - Current Status and Future Directions, University of Melbourne/ Australien, 19.11.09 (2009)

J. Eckert: From BMGs to composites: The role of heterogeneities on improving the mechanical properties of metastable alloys, Workshop on Amorphous Metals and Composites - Current Status and Future Directions, University of Melbourne/ Australien, 19.11.09 (2009)

J. Eckert: Bulk metallic glasses and composites for engineering applications, Tewkesbury Lecture, University of Melbourne/ Australien, 19.11.09. (2009)

J. Eckert: Bulk metallic glasses and hierarchical composites: Tailoring of properties for engineering applications, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Dresden, 18.12.09 (2009)

V. Hoffmann, V. Efimova, D. Klemm, M. Voronov, J. Eckert: Gepulste Glimmentladungen - von den Grundlagen zu den Anwendungen, 15. Tagung Festkoerperanalytik, Chemnitz, 12.-16.7.09 (2009)

D. Ruiz Romera, N. Van Steenberge, M. Stoica, K. Van Brussel, M. De Wulf, J. Eckert, S. Claessens: Technological applications of bulk metallic glasses: challenges to overcome, IWMG09: International Workshop on Structural and Mechanical Properties of Metallic Glasses, Barcelona/ Spanien, 17.-19.6.09 (2009)

M. Stoica, J. Eckert, D. Ruiz Romera, N. Van Steenberge, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses: thermal stability and magnetic properties, The WPI-Europe Workshop on Metallic Glasses and Related Materials, Grenoble/ France, 25.-28.8.09 (2009)

M. Stoica, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses with Cu additions, E-MRS Fall Meeting 2009, Warshaw/ Poland, 14.-18.9.09 (2009)

M. Stoica, R. Li, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: Magnetic properties of FeCoBSiNb BMGs with Cu additions, 11th International Conference on Advanced Materials- ICAM 2009, Rio/ Brazil, 20.-25.9.09 (2009)

M. Stoica, R. Li, A.R. Yavari, G. Vaughan, J. Eckert: Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses, International Symposium on Metastable, Amorphous and Nanostructured Materials- ISMANAM 2009, Beijing/ China, 5.-9.7.09 (2009)

2008

J. Eckert: Complex metallic alloys in confined geometries: Processing, structure and mechanical properties, International Workshop on Multiscale Phenomena in Materials, Wien/ Oesterreich, 10.9.08 (2008)

V. Hoffmann, V. Efimova, M. Voronov, P. Smid, E. Steers, J. Eckert: Measurement of voltage and current in continuous and pulsed rf and dc glow discharges, 24th SPIG, Novi Sad/ Serbien, 25.-29.8.08 (2008)

V. Hoffmann, V. Efimova, D. Klemm, M. Voronov, J. Eckert: Pulsed glow discharges – from fundamentals to applications, 2008 Third Asia Pacific Winter Conference, Tsukuba/ Japan, 16.-21.11.08 (2008)

U. Kuehn, A. Schlieter, U. Siegel, H. Wendrock, K. Werniewicz, L. Schultz, J. Eckert: Microstructure and thermomechanical properties of FeCrMoVC, RQ 13 (International Conference on Rapidly Quenched and Metastable Materials), Dresden, 28.9.08 (2008)

N. Mattern, T. Gemming, J. Thomas, G. Goeringk, H. Franz, J. Eckert: Phase separation in Ni-Nb-Y metallic glasses, ISMANAM2008, Buenos Aires/ Argentinien, 6.-10.7.08 (2008)

2007

J. Eckert, M. Sakaliyska, K.B. Surreddi, S. Scudino: Complex metallic alloys, 14th International Symposium on Metastable and Nano Materials, Korfu/ Griechenland, 28.8.07 (2007)

J. Eckert: Improving the plastic deformability of bulk metallic glasses, MRS Fall Meeting, Boston/ USA, 28.11.07 (2007)

J. Eckert: Neue Hochleistungswerkstoffe auf der Basis metastabiler Phasen, Seminar am Fraunhofer Institut fuer Fertigungstechnik und Angewandte Materialforschung, Institutsteil Pulvermetallurgie und Verbundwerkstoffe, Dresden, 19.1.07 (2007)

J. Eckert: High strength and ductile bulk nanostructured titanium alloys, TMS Annual Meeting and Exhibition, Structural Materials Division Symposium: "Mechanical Behavior of Nanostructured Materials" in Honor of Carl Koch, Orlando/ USA, 26.2.07 (2007)

J. Eckert: Design of ductile bulk metallic glasses and composites, TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (IV)", Orlando/ USA, 27.2.07 (2007)

A. Gebert, F. Gostin, R. Sueptitz, J. Das, U. Kuehn, J. Eckert, L. Schultz: Bulk metallic glasses and composites under environmental stresses, BMG Europe 2007 Meeting, Paris/ Frankreich, 2.-4.12.07 (2007)

U. Kuehn, U. Siegel, K. Werniewicz, J. Eckert: Herstellung, Eigenschaften und Anwendungen von metallischen Glaesern und Kompositen, Vortrag zum Werkstoffseminar des IWKI Adelboden, 3.-9.3.07 (2007)

M. Stoica, S. Kumar, S. Roth, S. Ram, J. Eckert, G. Vaughan, A.R. Yavari: Crystallization kinetics and magnetic properties of Fe66Nb4B30 bulk metallic glass, ISMANAM 2007 Conference, Korfu/ Griechenland, 26.-30.8.07 (2007)

2005

A. Gebert, U. Kuehn, S. Mato, J. Eckert, S. Baunack, L. Schultz: Cast bulk composites with glassy or nanostructured matrix under corrosion conditions, 8th International Symposium on Electrochemical-Chemical Reactivity of Metastable Materials, Szeged/ Ungarn, 28.-30.8.05 (2005)

S. Roth, M. Stoica, J. Degmova, J. Eckert, L. Schultz: Bulk amorphous magnetic materials, 17th Soft Magnetic Conference, Bratislava/ Slowakische Republik, 7.-9.9.05 (2005)

2004

A. Handstein, O. Perner, W. Haessler, C. Fischer, G. Fuchs, O. Gutfleisch, K. Nenkov, C. Rodig, J. Eckert, B. Holzapfel, K.-H. Mueller, L. Schultz: Critical currents in nanostructured MgB2 hot-pressed pellets and Iron-sheathed tapes, Conference on Processing and Fabrication of Advanced Materials (PFAM XIII), Singapore, 6.-8.12.04 (2004)

N. Radtke, U. Kuehn, S. Scudino, J. Eckert, L. Schultz: Microstructure, thermal stability and mechanical properties of slowly cooled Zr-based composites, Seminar-Vortrag am FG Physikalische Metallkunde der TU Darmstadt, 10.11.04 (2004)

L. Schultz, O. Perner, W. Haessler, C. Fischer, G. Fuchs, B. Holzapfel, J. Eckert: Mechanically alloyed MgB2 superconductors: microstructure tape formation and critical currents, ISMANAM 2004, Sendai/Japan, 22.-26.8.04 (2004)

M. Stoica, S. Roth, J. Eckert, L. Schultz: Bulk metastable Fe-based alloys, Nanomat Trend Workshop, IKTS Dresden, 26.-27.9.04 (2004)

2003

J. Eckert: Massive metallische Glaeser als Strukturmaterialien, 1.Landestechnologiekonferenz Mecklenburg-Vorpommern "Wachstumsimpulse durch neue Materialien",Rostock-Warnemuende, 23.-24.4.03 (2003)

J. Eckert, U. Kuehn, S. Scudino, N. Mattern: Quasicrystals and related phases in multicomponent alloy systems, MRS Fall Meeting, Boston/USA, 1.-5.12.03 (2003)

J. Eckert, G. He, U. Kuehn, N. Radtke, W. Loeser, N. Mattern: Improved mechanical properties in nanostructured materials derived from multicomponent alloys, ISMANAM 2003, Foz de Iguacu/Brasilien, 24.-28.8.03 (2003)

J. Eckert, O. Perner, G. Fuchs, K. Nenkov, K.-H. Mueller, W. Haessler, C. Fischer, B. Holzapfel, L. Schultz: High critical fields and currents in mechanically alloyed MgB2, Hauptvortrag DPG-Fruehjahrstagung, Dresden, 24.-28.3.03 (2003)

J. Eckert: Nanostructured composites in multicomponent alloy systems, International Workshop on "Nanostructured Metallic Materials", Akiu/Japan, 9.-11.3.03 (2003)

A. Gebert, S. Deledda, J. Eckert, L. Schultz: Corrosion properties and hydrogen reactions of multicomponent metastable alloys, INCOME 2003, Braunschweig, 7.-11.9.03 (2003)

N. Mitrovic, S. Roth, S. Djukic, J. Eckert: Magnetic softening of metallic glasses by current annealing technique, PROSIZE - NATO Advanced Research Workshop, Budmerice/ Slowakische Republik, 8.-14.6.03 (2003)

S. Roth, G. Saage, J. Eckert, L. Schultz: Low magnetostriction crystalline ribbons prepared by melt-spinning and reactive annealing, NATO Advanced Research Workshop on "Properties and applications of nanocrystalline alloys prepared from amorphous precursors", Budmerice/ Slowakische Republik, 9.-15.6.03 (2003)

L. Schultz, M. Savyak, M. Uhlemann, J. Eckert, A. Gebert: Effect of hydrogen on the stability of the Mg65Y10Cu25 metallic glass, 7th International Symposium on Electrochemical/Chemical Reactivity of Metastable Materials, Warsaw/Polen, 19.-23.8.03 (2003)

2002

J. Eckert: Praeparation und Eigenschaften neuer Werkstoffe auf der Basis metastabiler Phasen, TU Darmstadt, FB Materialwissenschaften, Darmstadt, 23.5.02 (2002)

J. Eckert, B. Bartusch, F. Schurack, G. He, L. Schultz: High strength nanostructured metastable alloys, The 1st Korea-Germany Joint Seminar on Nanostructured Materials, University of Ulsan/ Korea, 18.-19.11.02 (2002)

J. Eckert: Design, Eigenschaften und Verarbeitung metastabiler Materialien, Seminar an der Montanuniversitaet Leoben/Oesterreich, 15.1.02 (2002)

J. Eckert, F. Schurack, I. Boerner: High strength nanostructured aluminum alloys based on quasicrystalline or amorphous phases, 10th International Symposium on Processing and Fabrication of Advanced Materials, Indianapolis/USA, 5.-8.11.2001 (2002)

J. Eckert, U. Kuehn, G. He, W. Loeser, N. Mattern, A. Gebert: Phase formation, microstructural design and mechanical properties of bilk metallic glass composites, MRS Fall Meeting, Boston/USA, 2.-6.12.02 (2002)

J. Eckert, F. Schurack, L. Schultz: Synthesis and mechanical properties of high strength aluminium-based quasicrystalline composites, ISMANAM 2002, Seoul/Korea, 8.-12.9.02 (2002)

J. Eckert, U. Kuehn, N. Mattern, S. Deledda, B. Bartusch: Structural bulk metallic glasses with various length scale of constituent phases, Second Conference on Bulk Metallic Glasses, Keelung/Taiwan, 24.-29.3.02 (2002)

J. Eckert, U. Kuehn, N. Mattern, N. Radtke: Bulk metallic glass-based composites with different size of second phase particles, 11th International Symposium on Processing and Fabrication of Advanced Materials PFAMXI, Columbus/USA, 7.-10.10.02 (2002)

J. Eckert: Bulk metallic glasses and metastable composites: Synthesis and properties, Ames National Laboratory, Ames/USA, 11.10.02 (2002)

J. Eckert: Massive metallische Glaeser und Quasikristalle, Seminar "Physik amorpher und fluessiger Legierungen", Institut fuer Physik der TU Chemnitz, 30.4.02 (2002)

S. Roth, M. Stoica, J. Degmova, H. Grahl, J. Eckert, L. Schultz: Measurement of soft magnetic properties of iron-based bulk amorphous alloys, Joint Congress of two International Conferences: XVIth Electromagnetic Fields and Materials (EMFM) and Magnetic Measurements'02 (MM), Bratislava/Slowakische Republik, 11.-13.9.02 (2002)

L. Schultz, A. Bollero, A. Handstein, D. Hinz, A. Kirchner, A. Yan, K.-H. Mueller, G. Kumar, J. Eckert, O. Gutfleisch: Nanocomposite magnetic materials, The 1st Korea-Germany Joint Seminar on Nanostructured Materials, University of Ulsan/Korea, 18.-19.11.02 (2002)

2001

J. Eckert: Metastabile Phasen als Grundlage neuer Werkstoffe, Max-Planck-Institut fuer Eisenforschung, Duesseldorf, 30.5.01 (2001)

J. Eckert, F. Schurack, J. Boerner, S. Deledda: High strength nanostructured aluminium alloys based on quasicrystalline or amorphous phases, 10th International Symposium on Processing and Fabrication of Advanced Materials PFAM-X, Indianapolis/USA, 5.-8.11.01 (2001)

J. Eckert, S. Deledda, B. Bartusch, U. Kuehn, U. Wolff, A. Gebert: The effect of second phase particles on thermal stability, deformation behavior and electrochemical properties of Zr- and Mg-based bulk metallic glasses, ISMANAM 2001, Ann Arbor/USA, 24.-29.6.01 (2001)

J. Eckert: Metastabile Phasen in mehrkomponentigen Systemen: von der Physik zu neuen Werkstoffen, Institut fuer Materialphysik, Universitaet Muenster, 2.7.01 (2001)

J. Eckert: Metallische Werkstoffe und Verbundwerkstoffe, Seminar an der TU Ilmenau, 19.1.01 (2001)

J. Eckert: Massive amorphe und nanostrukturierte Materialien: von der Physik zu neuen Werkstoffen, Friedrich-Schiller-Universitaet Jena, 24.1.01 (2001)

J. Eckert: Massive amorphe and nanostrukturierte Materialien in mehrkomponentigen Legierungssystemen, Seminar am 1. Physikalischen Institut der Universitaet Goettingen, 12.2.01 (2001)

J. Eckert: Bulk amorphous and nanostructured materials: Synthesis and properties, Vortrag an der University of British Columbia, Dept. of Metals and Materials Engineering, Vancouver/Kanada, 16.2.01 (2001)

S. Roth, H. Grahl, J. Degmova, N. Schlorke-de Boer, M. Stoica, J. Eckert, J.M. Borrego, A. Conde, N.M. Mitrovic: Magnetic properties of some (Fe-Co)-(Al, Ga, Si)-(B,C,D) alloys with large undercooling, influence of preparation and treatment, International Workshop on Amorphous and Nanocrystalline Magnetic Materials, ANMM 2001, Iasi/Rumaenien, 17.-18.9.01 (2001)

2000

G. David, S. Roth, J. Eckert, L. Schultz: Extraction of boron from Fe80B20 by annealing under hydrogen flow, THERMEC 2000, Las Vegas/USA, 4.-8.12.00 (2000)

J. Eckert, U. Kuehn, G.J. Fan, W. Loeser, S. Roth: Bulk amorphous and nanoscale structures in transition metal- and rare earth-based alloys, MRS Fall Meeting, Boston/USA, 29.11.00 (2000)

J. Eckert, U. Kuehn, N. Mattern, A. Reger-Leonhard, M. Heilmaier: Bulk nanostructured Zr-based multiphase alloys with high strength and good ductility, The Fifth International Conference on Nanostructured Materials "NANO'2000", Sendai/Japan, 20.-25.8.00 (2000)

J. Eckert: Bulk metallic glasses and composites in multicomponent systems, Conference on "Bulk Metallic Glasses", Singapore, 24.-28.9.00 (2000)

J. Eckert: Massive amorphe und nanostrukturierte Materialien, Kolloquium "Angewandte Werkstoffkunde", TU Clausthal, 10.10.00 (2000)

J. Eckert, U. Kuehn, G.J. Fan, W. Loeser, S. Roth: Bulk amorphous and nanoscale structures in transition-metal and rare earth-based alloys, MRS Fall Meeting, Boston/USA, 27.11.-1.12.00 (2000)

A. Gebert, J. Eckert, U. Kuehn, A. Reger-Leonhard, N. Ismail: Nanostructured Zr-based alloys - Phase transition, mechanical and electrochemical properties, Chinesisch-Deutscher Workshop "Characterization and development of nanosystems", Peking/China, 30.10.-2.11.00 (2000)

N. Mattern, J. Neuefeind, U. Kuehn, M. Zinkevitch, J. Eckert: Short-range order and crystallization of Zr-based bulk metallic glasses, THERMEC 2000, Las Vegas/USA, 4.-8.12.00 (2000)

F. Schurack, J. Eckert, L. Schultz: Quasicrystal-reinforced high-strength Al alloys by rapid solidification and solid state reaction, Quasicrystals - Structure and Physical properties, Joint Colloquium Ex-GDR-CINQ and DFG-SPQK, Juelich, 5.-7.4.00 (2000)

1999

J. Eckert: Mechanisch legierte metastabile Materialien, Institut fuer Physikalische Metallkunde, TU Dresden, 6.5.99 (1999)

J. Eckert: Nanokristalline und amorphe Materialien in multinaeren Systemen, Institut fuer Physikalische Chemie und Elektrochemie, Universitaet Hannover, 31.5.99 (1999)

J. Eckert: Nanostructured materials in multicomponent alloy systems, TMS Fall Meeting, Cincinnati/USA, 31.10.-4.11.99 (1999)

J. Eckert: Structure and properties of advanced materials based on metastable phases, Kolloquium der TU Delft/Niederlande, 28.5.99 (1999)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen, Kolloquium im FB Verfahrenstechnik, Umwelttechnik, Werkstoffwissenschaften der TU Berlin, 8.6.99 (1999)

J. Eckert: Metastabile Phasen als Grundlage fuer neue Materialien, Seminar im Technischen Institut der Friedrich-Schiller-Universitaet Jena, 16.7.99 (1999)

J. Eckert: Nanokristalline Materialien durch Festkoerperreaktion, Fruehjahrstagung des AK Festkoerperphysik der Deutschen Physikalischen Gesellschaft, Muenster, 22.-26.3.99 (1999)

J. Eckert: Neue Materialien durch Nichtgleichgewichtsverfahren, Adelbodener Werkstoffseminar, Adelboden/Schweiz, 6.-13.3.99 (1999)

M. Heilmaier, A. Leonhard, J. Eckert, L. Schultz: Mechanical behaviour of Zr-based bulk glass forming alloys, EUROMAT'99, Muenchen, 27.-30.9.99 (1999)

1998

J. Eckert: Metastabile Phasen durch Nichtgleichgewichtsprozesse, Kolloquium am Hahn-Meitner-Institut Berlin, 27.2.98 (1998)

J. Eckert: Solid state processing of bulk metallic glasses, American Physical Society March Meeting, Los Angeles, USA, 16.-20.3.1998 (1998)

J. Eckert: Phasenbildung und Eigenschaften metastabiler Legierungen, Kolloquium der TU Clausthal, 26.1.1998 (1998)

J. Eckert: Mechanical alloying of bulk metallic glass forming systems, International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials, ISMANAM'98, Wollongong/Australien, 7.-12.12.98 (1998)

J. Eckert: Synthesis and properties of bulk metallic glasses and glass-matrix composites, MRS Fall Meeting, Boston/USA, 30.11.-4.12.98 (1998)

A. Gebert, K. Buchholz, K. Mummert, J. Eckert, L. Schultz: Investigation on the electrochemical behaviour of Zr-based bulk metallic glasses, 5th International Symposium on Electrochemical/Chemical Reactivity of Novel Materials, Sendai/Japan, 3.-6.10.98 (1998)

A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, L. Schultz: Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys, TMS Annual Meeting, San Antonio/USA, 16.2.98 (1998)

L. Schultz, W. Gruenberger, A. Kirchner, O. Gutfleisch, K.-H. Mueller, G. Fuchs, J. Eckert: Deformation processing of magnetic materials, 43rd Annual Conference on Magnetism and Magnetic Materials MMM98, Miami/USA, 9.-12.11.98 (1998)

1997

J. Eckert: Herstellung und Eigenschaften nanokristalliner und amorpher Werkstoffe, Institut fuer Metallkunde, Universitaet Stuttgart, 23.1.97 (1997)

J. Eckert: Mechanical alloying of advanced materials, IWCC Technical Seminar, Singapore, 24.10.97 (1997)

J. Eckert: Solid state processing of nanomaterials, Herbsttagung der Societe de Metallurgie et de Materiaux SF2M, Paris, 26.11.97 (1997)

J. Eckert: Metallic glass formation in multicomponent alloys, EUROMAT'97, Maastricht, 21.-23.4.1997 (1997)

J. Eckert: Phasenbildung unter Nichtgleichgewichtsbedingungen, Werkstoffkolloquium Universitaet Karlsruhe, 24.6.1997 (1997)

J. Eckert: Solid state processing of nanomaterials, SF2M Fall Meeting, Paris, 25.-27.11.1997 (1997)

N. Mattern, J. Eckert, M. Seidel: Relaxation und Kristallisation amorpher ZrAlCuAl-Legierungen, 5. Jahrestagung der Deutschen Gesellschaft fuer Kristallographie, Hamburg, 10.-12.3.97 (1997)

1996

J. Eckert: Mechanisch legierte metallische Glaeser mit weitem Unterkuehlungsbereich, Lehrstuhl fuer Materialverbunde der Technischen Fakultaet der Christian-Albrechts-Universitaet Kiel, 17.6.96 (1996)

J. Eckert: Mechanical alloying of highly processable glassy alloys, 9th International Conference on Rapidly Quenched and Metastable Materials, Bratislava/Slovakei, 25.-30.8.96 (1996)

J. Eckert: Fabrication and processing of bulk metallic glasses by mechanical alloying, Edgar Luescher Seminar, Serneus/Schweiz, 29.1.96 (1996)