Recent Publications of the Institute for Complex Materials

Journal papers

2015

S. Abdi, S. Oswald, P.F. Gostin, A. Helth, J. Sort, M.D. Baro, M. Calin, L. Schultz, J. Eckert, A. Gebert: Designing new biocompatible glass-forming Ti75-xZr10NbxSi15 (x=0, 15) alloys: corrosion, passivity, and apatite formation, Journal of Biomedical Materials Research Part B: Applied Biomaterials online first (2015)

H. Attar, K.G. Prashanth, A.K. Chaubey, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes, Materials Letters 142 (2015), S. 38-41 URL

H. Attar, L. Loeber, A. Funk, M. Calin, L.C. Zhang, K.G. Prashanth, S. Scudino, Y.S. Zhang, J. Eckert: Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting, Materials Science and Engineering A 625 (2015), S. 350-356 URL

J. Balach, T. Jaumann, M. Klose, S. Oswald, J. Eckert, L. Giebeler: Mesoporous Carbon Interlayers with Tailored Pore Volume as Polysulfide Reservoir for High-Energy Lithium-Sulfur Batteries, The Journal of Physical Chemistry C 119 (2015) Nr. 9, S. 4580-4587 URL

O. Balci, K.G. Prashanth, S. Scudino, D. Agaogullari, I. Duman, M.L. Oevecoglu, V. Uhlenwinkel, J. Eckert: Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles, Metals 5 (2015) Nr. 2, S. 669-685 URL

B. Op de Beeck, M. Dusselier, J. Geboers, J. Holsbeek, E. Morre, S. Oswald, L. Giebeler, B.F. Sels: Direct catalytic conversion of cellulose to liquid straight-chain alkanes, Energy and Environmental Science 8 (2015), S. 230-240 URL

M. Bleckmann, J. Gleinig, J. Hufenbach, H. Wendrock, L. Giebeler, J. Zeisig, U. Diekmann, J. Eckert, U. Kuehn: Effect of cooling rate on the microstructure and properties of FeCrVC, Journal of Alloys and Compounds 634 (2015), S. 200-207 URL

M. Boenisch, M. Calin, J. van Humbeeck, W. Skrotzki, J. Eckert: Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys, Materials Science and Engineering C 48 (2015), S. 511-520 URL

F. Cao, Y. Jia, K.G. Prashanth, P. Ma, J. Li, S. Scudino, F. Huang, J. Eckert, J. Sun: Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content, Materials and Design 74 (2015), S. 150-156 URL

A.K. Chaubey, S. Scudino, K.G. Prashanth, J. Eckert: Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium, Materials Science and Engineering A 625 (2015), S. 46-49 URL

J. Dijkmans, M. Dusselier, D. Gabriels, K. Houthoofd, P.C.M.M. Magusin, S. Huang, Y. Pontikes, M. Trekels, A. Vantomme, L. Giebeler, S. Oswald, B.F. Sels: Cooperative Catalysis for Multistep Biomass Conversion with Sn/Al Beta Zeolite, ACS Catalysis 5 (2015) Nr. 2, S. 928-940 URL

P. Gargarella, S. Pauly, M. Stoica, G. Vaughan, C.R.M. Afonso, U. Kuehn, J. Eckert: Structural evolution in Ti-Cu-Ni metallic glasses during heating, APL materials 3 (2015) Nr. 1, S. 16101/1-6 URL

P. Gargarella, S. Pauly, M.F. de Oliveira, U. Kuehn, J. Eckert: Glass formation in the Ti-Cu system with and without Si additions, Journal of Alloys and Compounds 618 (2015), S. 413-420 URL

A. Gebert, S. Oswald, A. Helth, A. Voss, P.F. Gostin, M. Rohnke, J. Janek, M. Calin, J. Eckert: Effect of indium (In) on corrosion and passivity of a beta-type Ti-Nb alloy in Ringer's solution, Applied Surface Science 335 (2015), S. 213-222 URL

P.F. Gostin, D. Eigel, D. Grell, J. Eckert, E. Kerscher, A. Gebert: Comparing the pitting corrosion behavior of prominent Zr-based bulk metallic glasses, Journal of Materials Research 30 (2015) Nr. 2, S. 233-241 URL

J. He, N. Mattern, I. Kaban, F. Dai, K. Song, Z. Yan, J. Zhao, D.H. Kim, J. Eckert: Enhancement of glass-forming ability and mechanical behavior of zirconium-lanthanide two-phase bulk metallic glasses, Journal of Alloys and Compounds 618 (2015), S. 795-802 URL

T. Jaumann, M. Herklotz, M. Klose, K. Pinkert, S. Oswald, J. Eckert, L. Giebeler: Tailoring hollow Silicon-Carbon nanocomposites as high-performance anodes in secondary Lithium-based batteries through economical chemistry, Chemistry of Materials 27 (2015), S. 37-43 URL

P. Jovari, S. Cui, V. Nazabal, I. Kaban, B. Beuneu, M. Dussauze, C. Boussard, B. Bureau: Network Rearrangement in AgI-Doped GeTe4 Glasses, Journal of the American Ceramic Society 98 (2015) Nr. 3, S. 1034-1039

M. Samadi Khoshkhoo, S. Scudino, T. Gemming, J. Thomas, J. Freudenberger, M. Zehetbauer, C.C. Koch, J. Eckert: Nanostructure formation mechanism during in-situ consolidation of copper by room-temperature ball milling, Materials and Design 65 (2015), S. 1083-1090 URL

M. Krautz, A. Funk, K.P. Skokov, T. Gottschall, J. Eckert, O. Gutfleisch, A. Waske: A new type of La(Fe,Si)13-based magnetocaloric composite with amorphous metallic matrix, Scripta Materialia 95 (2015), S. 50-53 URL

M. Madian, L. Giebeler, M. Klose, T. Jaumann, M. Uhlemann, A. Gebert, S. Oswald, N. Ismail, A. Eychmueller, J. Eckert: Self-Organized TiO2/CoO Nanotubes as Potential Anode Materials for Lithium Ion Batteries, ACS Sustainable Chemisty & Engineering 3 (2015) Nr. 5, S. 909-919 URL

R.G. Mendes, B. Koch, A. Bachmatiuk, X. Ma, S. Sanchez, C. Damm, O.G. Schmidt, T. Gemming, J. Eckert, M.H. Ruemmli: A size dependent evaluation of the cytotoxicity and uptake of nanographene oxide, Journal of Materials Chemistry B 3 (2015) Nr. 12, S. 2522-2529 URL

A. Panigrahi, M. Boenisch, T. Waitz, E. Schafler, M. Calin, J. Eckert, W. Skrotzki, M. Zehetbauer: Phase transformations and mechanical properties of biocompatible Ti16.1Nb processed by severe plastic deformation, Journal of Alloys and Compounds 628 (2015), S. 434-441 URL

I. Pethes, I. Kaban, R.-P. Wang, B. Luther-Davies, P. Jovari: Short range order in Ge-As-Se glasses, Journal of Alloys and Compounds 623 (2015), S. 454-459 URL

K.G. Prashanth, H. Shakur Shahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, S. Scudino: Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting, Additive Manufacturing 6 (2015), S. 1-5 URL

B. Sarac, D. Sopu, E. Park, J.K. Hufenbach, S. Oswald, M. Stoica, J. Eckert: Mechanical and Structural Investigation of Porous Bulk Metallic Glasses, Metals 5 (2015) Nr. 2, S. 920-933 URL

C. Schliebe, T. Gemming, J. Noll, L. Mertens, M. Mehring, A. Seifert, S. Spange, H. Lang: Zirconium and Hafnium Twin Monomers for Mixed Oxides, ChemPlusChem 80 (2015) Nr. 3, S. 559-567

S. Scudino, C. Unterdoerfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, J. Eckert: Additive manufacturing of Cu-10Sn bronze, Materials Letters 156 (2015), S. 202-204 URL

S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, B. Escher, U. Kuehn, G.B.M. Vaughan, J. Eckert: Structural features of plastic deformation in bulk metallic glasses, Applied Physics Letters 106 (2015) Nr. 3, S. 31903/1-5 URL

S. Scudino, M. Stoica, I. Kaban, K.G. Prashanth, G.B.M. Vaughan, J. Eckert: Length scale-dependent structural relaxation in Zr57.5Ti7.5Nb5Cu12.5Ni10Al7.5 metallic glass, Journal of Alloys and Compounds 639 (2015), S. 465-469 URL

H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, U. Ruett, U. Kuehn, J. Eckert: Structural aspects of elasto-plastic deformation of a Zr-based bulk metallic glass under uniaxial compression, Acta Materialia 95 (2015), S. 30-36 URL

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, M. Nicoara, G.B.M. Vaughan, J. Wright, R. Kumar, J. Eckert: Structure evolution of soft magnetic (Fe36Co36B19.2Si4.8Nb4)100-xCux (x=0 and 0.5) bulk glassy alloys, Acta Materialia 95 (2015), S. 335-342 URL

N. Teichert, D. Kucza, O. Yildirim, E. Yuzuak, I. Dincer, A. Behler, B. Weise, L. Helmich, A. Boehnke, S. Klimova, A. Waske, Y. Elerman, A. Huetten: Structure and giant inverse magnetocaloric effect of epitaxial Ni-Co-Mn-Al films, Physical Review B 91 (2015) Nr. 18, S. 184405/1-7 URL

N. Teichert, A. Boehnke, A. Behler, B. Weise, A. Waske, A. Huetten: Exchange bias effect in martensitic epitaxial Ni-Mn-Sn thin films applied to pin CoFeB/MgO/CoFeB magnetic tunnel junctions, Applied Physics Letters 106 (2015) Nr. 19, S. 192401/1-4 URL

U. Vogel, E. Brachmann, S. Oswald, S. Menzel, T. Gemming, J. Eckert: Evaluation of a mobile vacuum transfer system for in vacuo XPS analysis using as-deposited Ti thin-films, Vacuum 117 (2015), S. 81-84 URL

Z. Wang, K.G. Prashanth, A.K. Chaubey, L. Loeber, F.P. Schimansky, F. Pyczak, W.W. Zhang, S. Scudino, J. Eckert: Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles, Journal of Alloys and Compounds 630 (2015), S. 256-259 URL

A. Waske, L. Giebeler, B. Weise, A. Funk, M. Hinterstein, M. Herklotz, K. Skokov, S. Faehler, O. Gutfleisch, J. Eckert: Asymmetric first-order transition and interlocked particle state in magnetocaloric La(Fe,Si)13, physica status solidi (RRL) - Rapid Research Letters 9 (2015) Nr. 2, S. 136-140

Z. Wei, P. Ma, H. Wang, C. Zou, S. Scudino, K. Song, K.G. Prashanth, W. Jiang, J. Eckert: The thermal expansion behaviour of SiCp/ Al- 20Si composites solidified under high pressures, Materials and Design 65 (2015), S. 387-394 URL

L. Xi, I. Kaban, R. Nowak, B. Korpala, G. Bruzda, N. Sobczak, N. Mattern, J. Eckert: High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic, Journal of Materials Science 50 (2015) Nr. 7, S. 2682-2690

2014

S. Abdi, M. Samadi Khoshkhoo, O. Shuleshova, M. Boenisch, M. Calin, L. Schultz, J. Eckert, M.D. Baro, J. Sort, A. Gebert: Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti-Zr-Si alloy, Intermetallics 46 (2014), S. 156-163 URL

J. Akola, P. Jovari, I. Kaban, I. Voleska, J. Kolar, T. Wagner, R.O. Jones: Structure, electronic, and vibrational properties of amorphous AsS2 and AgAsS2: Experimentally constrained density functional study, Physical Review B 89 (2014) Nr. 6, S. 64202/1-9 URL

F. Ali, S. Scudino, M.S. Anwar, R.N. Shahid, V.C. Srivastava, V. Uhlenwinkel, M. Stoica, G. Vaughan, J. Eckert: Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction, Journal of Alloys and Compounds 607 (2014), S. 274-279 URL

H. Attar, M. Boenisch, M. Calin, L.-C. Zhang, S. Scudino, J. Eckert: Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties, Acta Materialia 76 (2014), S. 13-22 URL

H. Attar, M. Boenisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert: Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies, Journal of Materials Research 29 (2014), S. 1941-1950 URL

H. Attar, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Materials Science and Engineering A 593 (2014), S. 170-177 URL

A. Bachmatiuk, R.F. Abelin, H.T. Quang, B. Trzebicka, J. Eckert, M.H. Ruemmeli: Chemical vapor deposition of twisted bilayer and few-layer MoSe2 over SiO x substrates, Nanotechnology 25 (2014) Nr. 36, S. 365603/1-5 URL

T. Biemelt, C. Selzer, F. Schmidt, G. Mondin, A. Seifert, K. Pinkert, S. Spange, T. Gemming, S. Kaskel: Hierarchical porous zeolite ZSM-58 derived by desilication and desilication re-assembly, Microporous and Mesoporous Materials 187 (2014), S. 114-124 URL

B. Boehme, C.B. Minella, F. Thoss, I. Lindemann, M. Rosenburg, C. Pistidda, C.T. Moeller, T.R. Jensen, L. Giebeler, M. Baitinger, O. Gutfleisch, H. Ehrenberg, J. Eckert, Y. Grin, L. Schultz: B1 - Mobilstor: Materials for sustainable energy storage techniques - Lithium containing compounds for hydrogen and electrochemical energy storage, Advanced Engineering Materials 16 (2014) Nr. 10, S. 1183-1195

M. Boenisch, M. Calin, L. Giebeler, A. Helth, A. Gebert, W. Skrotzki, J. Eckert: Composition-dependent magnitude of atomic shuffles in Ti-Nb martensites, Journal of Applied Crystallography 47 (2014), S. 1374-1379 URL

V. Brackmann, V. Hoffmann, A. Kauffmann, A. Helth, J. Thomas, H. Wendrock, J. Freudenberger, T. Gemming, J. Eckert: Glow discharge plasma as a surface preparation tool for microstructure investigations, Materials Characterization 91 (2014), S. 76-88 URL

N. Brun, K. Sakaushi, J. Eckert, M.M. Titirici: Carbohydrate-derived nanoarchitectures: On a synergistic effect toward an improved performance in Lithium-Sulfur batteries, ACS Sustainable Chemistry and Engineering 2 (2014), S. 126-129 URL

M. Calin, A. Helth, J.J. Gutierrez Moreno, M. Boenisch, V. Brackmann, L. Giebeler, T. Gemming, C.E. Lekka, A. Gebert, R. Schnettler, J. Eckert: Elastic softening of Beta-type Ti-Nb alloys by indium (In) additions, Journal of the Mechanical Behavior of Biomedical Materials 39 (2014), S. 162-174 URL

R.D. Cava, C. Bolfarini, C.S. Kiminami, E.M. Mazzer, W.J. Botta Filho, P. Gargarella, J. Eckert: Spray forming of Cu-11.85Al-3.2Ni-3Mn (wt%) shape memory alloy, Journal of Alloys and Compounds 615 (2014) Nr. S1, S. S602-S606 URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: High-strength ultrafine grain Mg- 7.4% Al alloy synthesized by consolidation of mechanically alloyed powders, Journal of Alloys and Compounds 610 (2014), S. 456-461 URL

M.O. Cichocka, J. Zhao, A. Bachmatiuk, H.T. Quang, S.M. Gorantla, I.G. Gonzalez-Martinez, L. Fu, J. Eckert, J.H. Warner, M.H. Ruemmeli: In situ observations of Pt nanoparticles coalescing inside carbon nanotubes, RSC Advances 4 (2014), S. 49442-49445 URL

S. Doerfler, K. Pinkert, M. Weiser, C. Wabnitz, A. Goldberg, B. Ferse, L. Giebeler, H. Althues, M. Schneider, J. Eckert, A. Michaelis, E. Beyer, S. Kaskel: D2 Enertrode: Production technologies and component integration of nanostructured carbon electrodes for energy technology - Functionalized carbon materials for efficient electrical energy supply, Advanced Engineering Materials 16 (2014) Nr. 10, S. 1196-1201

P. Donnadieu, C. Pohlmann, S. Scudino, J.-J. Blandin, K.B. Surreddi, J. Eckert: Deformation at ambient and high temperature of in situ Laves phases-ferrite composites, Science and Technology of Advanced Materials 15 (2014), S. 34801/1-8 URL

P. Entel, M.E. Gruner, D. Comtesse, V.V. Sokolovskiy, V.D. Buchelnikov: Interacting magnetic cluster-spin glasses and strain glasses in NiMn based Heusler structured intermetallics, Physica Status Solidi B 251 (2014) Nr. 10, S. 2135-2148 URL

P.P. Ferguson, D.-B. Leb, A.D.W. Todd, M.L. Martine, S. Trussler, M.N. Obrovac, J.R. Dahn: Nanostructured Sn30Co30C40 alloys for lithium-ion battery negative electrodes prepared by horizontal roller milling, Journal of Alloys and Compounds 595 (2014), S. 138-141 URL

P.P. Ferguson, A.D.W. Todd, M.L. Martine, J.R. Dahn: Structure and performance of Tin-Cobalt-Carbon alloys prepared by attriting, roller milling and sputtering, Journal of The Electrochemical Society 161 (2014), S. A342-A347 URL

P. Gargarella, S. Pauly, M. Samadi Khoshkhoo, U. Kuehn, J. Eckert: Phase formation and mechanical properties of Ti-Cu-Ni-Zr bulk metallic glass composites, Acta Materialia 65 (2014), S. 259-269 URL

A. Gebert, P.F. Gostin, R. Sueptitz, S. Oswald, S. Abdi, M. Uhlemann, J. Eckert: Polarization studies of Zr-based bulk metallic glasses for electrochemical machining, Journal of The Electrochemical Society 161 (2014), S. E66-E73 URL

F. German, A. Hintennach, A. LaCroix, D. Thiemig, S. Oswald, F. Scheiba, M.J. Hoffmann, H. Ehrenberg: Influence of temperature and upper cut-off voltage on the formation of lithium-ion cells, Journal of Power Sources 264 (2014), S. 100-107 URL

C. Gonzalez-Gago, P. Smid, T. Hofmann, C. Venzago, V. Hoffmann, W. Gruner: The use of matrix-specific calibrations for oxygen in analytical glow discharge spectrometry, Analytical and Bioanalytical Chemistry 406 (2014), S. 7473-7482 URL

I.G. Gonzalez-Martinez, S.M. Gorantla, A. Bachmatiuk, V. Bezugly, J. Zhao, T. Gemming, J. Kunstmann, J. Eckert, G. Cuniberti, M.H. Ruemmeli: Room temperature in situ growth of B/BOx nanowires and BOx nanotubes, Nano Letters 14 (2014), S. 799-805 URL

S. Gorantla, A. Bachmatiuk, J. Hwang, H.A. Alsalman, J.Y. Kwak, T. Seyller, J. Eckert, M.G. Spencer, M.H. Ruemmeli: A universal transfer route for graphene, Nanoscale 6 (2014), S. 889-896 URL

P.F. Gostin, H. Wendrock, I. Schneider, M. Bleckmann, M. Stoica, U. Kuehn, J. Eckert: Microstructure and mechanical properties of a newly developed high strength Mg54.7Cu11.5Ag3.3Gd5.5Sc25 alloy, Intermetallics 45 (2014), S. 84-88 URL

F. Haag, D. Beitelschmidt, J. Eckert, K. Durst: Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending A nanoindentation and atomic force microscopy study, Acta Materialia 70 (2014), S. 188-197 URL

S. Haindl, M. Kidszun, S. Oswald, C. Hess, B. Buechner, S. Koelling, L. Wilde, T. Thersleff, V.V. Yurchenko, M. Jourdan, H. Hiramatsu, H. Hosono: Thin film growth of Fe-based superconductors: From fundamental properties to functional devices. A comparative review, Reports on Progress in Physics 77 (2014), S. 46502/1-32 URL

J.H. Han, N. Mattern, U. Vainio, A. Shariq, S.W. Sohn, D.H. Kim, J. Eckert: Phase separation in Zr56-xGdxCo28Al16 metallic glasses (0< x < 20), Acta Materialia 66 (2014), S. 262-272 URL

A. Helth, P.F. Gostin, S. Oswald, H. Wendrock, U. Wolff, U. Hempel, S. Arnhold, M. Calin, J. Eckert, A. Gebert: Chemical nanoroughening of Ti40Nb surfaces and its effect on human mesenchymal stromal cell response, Journal of Biomedical Materials Research, Part B - Applied Biomaterials 102 B (2014), S. 31-41

M. Herklotz, F. Scheiba, R. Glaum, E. Mosymow, S. Oswald, J. Eckert, H. Ehrenberg: Electrochemical oxidation of trivalent chromium in a phosphatematrix: Li3Cr2(PO4)3as cathode material for lithium ion batteries, Electrochimica Acta 139 (2014), S. 356-364 URL

H. Hermann: Sung Nok Chiu et al.: Stochastic geometry and its applications, Physik-Journal (2014) Nr. 9, S. 75

H. Hermann, A. Elsner: Geometric models for isotropic random porous media: A review, Advances in Materials Science and Engineering (2014), S. 1-16 URL

H. Hermann, U. Kuehn, H. Wendrock, V. Kokotin, B. Schwarz: Evidence for cooling-rate-dependent icosahedral short-range order in a Cu-Zr-Al metallic glass, Journal of Applied Crystallography 47 (2014), S. 1906-1911

A.-K. Herrmann, P. Formanek, L. Borchardt, M. Klose, L. Giebeler, J. Eckert, S. Kaskel, N. Gaponik, A. Eychmueller: Multimetallic aerogels by template-free self-assembly of Au, Ag, Pt, and Pd nanoparticles, Chemistry of Materials 26 (2014), S. 1074-1083 URL

C. Hoffmann, T. Biemelt, M.R. Lohe, M.H. Ruemmeli, S. Kaskel: Nanoporous and highly active Silicon carbide supported CeO2-catalysts for the Methane oxidation reaction, Small 10 (2014), S. 316-322 URL

A. Hynowska, A. Blanquer, E. Pellicer, J. Fornell, S. Surinach, M.D. Baro, A. Gebert, M. Calin, J. Eckert, C. Nogues, E. Ibanez, L. Barrios, J. Sort: Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery, Journal of Biomedical Materials Research Part B: Applied Biomaterials online first (2014)

J.J. Ipus, J.S. Blazquez, V. Franco, M. Stoica, A. Conde: Milling effects on magnetic properties of melt spun Fe-Nb-B alloy, Journal of Applied Physics 115 (2014) Nr. 17, S. 17B518/1-3 URL

F.A. Javid, N. Mattern, M. Samadi Khoshkhoo, M. Stoica, S. Pauly, J. Eckert: Phase formation of Cu50xCoxZr50 (x = 020 at.%) alloys: Influence of cooling rate, Journal of Alloys and Compounds 590 (2014), S. 428-434 URL

Y. Jia, F. Cao, S. Scudino, P. Ma, H. Li, L. Yu, J. Eckert, J. Sun: Microstructure and thermal expansion behavior of spray-deposited Al50Si, Materials and Design 57 (2014), S. 585-591 URL

P. Jovari, P. Lucas, Z. Yang, B. Bureau, I. Kaban, B. Beuneu, J. Bednarcik: Short-range order in Ge-As-Te glasses, Journal of the American Ceramic Society 97 (2014) Nr. 5, S. 1625-1632

H.Y. Jung, S. Yi: Nanocrystallization and soft magnetic properties of Fe23M6 (M: C or B) phase in Fe-based bulk metallic glass, Intermetallics 49 (2014), S. 18-22 URL

H.Y. Jung, M. Stoica, S. Yi, D.H. Kim, J. Eckert: Crystallization kinetics of Fe76.5xC6.0Si3.3B5.5P8.7Cux (x = 0, 0.5, and 1 at. pct) bulk amorphous alloy, Metallurgical and Materials Transactions A (2014)

H.Y. Jung, M. Stoica, S. Yi, D.H. Kim, J. Eckert: Electrical and magnetic properties of Fe-based bulk metallic glass with minor Co and Ni addition, Journal of Magnetism and Magnetic Materials 364 (2014), S. 80-84 URL

I. Kaban, K. Khalouk, F. Gasser, J.-G. Gasser, J. Bednarcik, O. Shuleshova, I. Okulov, T. Gemming, N. Mattern, J. Eckert: In situ studies of temperature-dependent behaviour and crystallisation of Ni36.5Pd36.5P27 metallic glass, Journal of Alloys and Compounds 615 (2014), S. S208-S212 URL

I. Kaban, P. Jovari, A. Waske, M. Stoica, J. Bednarcik, B. Beuneu, N. Mattern, J. Eckert: Atomic structure and magnetic properties of Fe-Nb-B metallic glasses, Journal of Alloys and Compounds 586 (2014) Nr. Suppl. 1, S. S189-S193 URL

F. Karnbach, M. Uhlemann, A. Gebert, J. Eckert, K. Tschulik: Magnetic field templated patterning of the soft magnetic alloy CoFe, Electrochimica Acta 123 (2014), S. 477-484 URL

S.M. Khoshkhoo, S. Scudino, J. Bednarcik, A. Kauffmann, H. Bahmanpour, J. Freudenberger, R. Scattergood, M.J. Zehetbauer, C.C. Koch, J. Eckert: Mechanism of nanostructure formation in ball-milled Cu and Cu3wt%Zn studied by X-ray diffraction line profile analysis, Journal of Alloys and Compounds 588 (2014), S. 138-143 URL

W. Kicinski, M. Bystrzejewski, M.H. Ruemmeli, T. Gemming: Porous graphitic materials obtained from carbonization of organic xerogels doped with transition metal salts, Bulletin of Materials Science 37 (2014) Nr. 1, S. 141-150

M. Klose, I. Lindemann, C. Bonatto Minella, K. Pinkert, M. Zier, L. Giebeler, P. Nolis, M.D. Baro, S. Oswald, O. Gutfleisch, H. Ehrenberg, J. Eckert: Unusual oxidation behavior of light metal hydride by tetrahydrofuran solvent molecules confined in ordered mesoporous carbon, Journal of Materials Research 29 (2014) Nr. 1, S. 55-63 URL

M. Klose, K. Pinkert, M. Zier, M. Uhlemann, F. Wolke, T. Jaumann, P. Jehnichen, D. Wadewitz, S. Oswald, J. Eckert, L. Giebeler: Hollow carbon nano-onions with hierarchical porosity derived from commercial metal organic framework, Carbon 79 (2014), S. 302-309 URL

M. Krautz, J. Hosko, K. Skokov, P. Svec, M. Stoica, L. Schultz, J. Eckert, O. Gutfleisch, A. Waske: Pathways for novel magnetocaloric materials: A processing prospect, Physica Status Solidi (c) 11 (2014) Nr. 5-6, S. 1039-1042

M. Krautz, K. Skokov, T. Gottschall, C.S. Teixeira, A. Waske, J. Liu, L. Schultz, O. Gutfleisch: Systematic investigation of Mn substituted La(Fe,Si)13 alloys and their hydrides for room-temperature magnetocaloric application, Journal of Alloys and Compounds 598 (2014), S. 27-32 URL

S. Kudela, K. Izdinsky, S. Oswald, P. Ranachowski, Z. Ranachowski, S. Kudela: Decomposition of silica binder during infiltration of Saffil fiber preform with Mg and Mg-Li melts, Kovove Materialy - Metallic Materials 52 (2014) Nr. 4, S. 183-188

M.H. Lee, B.S. Kim, D.H. Kim, R.T. Ott, F. Sansoz, J. Eckert: Effect of geometrical constraint condition on the formation of nanoscale twins in the Ni-based metallic glass composite, Philosophical Magazine Letters 94 (2014) Nr. 6, S. 351-360 URL

M.H. Lee, E.S. Park, R.T. Ott, B.S. Kim, J. Eckert: Evaluation of the relationship between the effective strain and the springback behavior during the deformation of metallic glass ribbons, Applied Physics Letters 105 (2014) Nr. 6, S. 61906/1-3 URL

S.W. Lee, J.T. Kim, S.H. Hong, H.J. Park, J.-Y. Park, N.S. Lee, Y. Seo, J.Y. Suh, J. Eckert, D.H. Kim, J.M. Park, K.B. Kim: Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite, Scientific Reports 4 (2014), S. 6500/1-5 URL

K. Li, C. Song, Q. Zhai, M. Stoica, J. Eckert: Microstructure evolution of gas-atomized Fe- 6.5 wt% Si droplets, Journal of Materials Research 29 (2014) Nr. 4, S. 527-534 URL

L. Loeber, F.P. Schimansky, U. Kuehn, F. Pyczak, J. Eckert: Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy, Journal of Materials Processing Technology 214 (2014) Nr. 9, S. 1852-1860 URL

M. Luckabauer, U. Kuehn, J. Eckert, W. Sprengel: Specific volume study of a bulk metallic glass far below its calorimetrically determined glass transition temperature, Physical Review B 89 (2014) Nr. 17, S. 174113/1-6 URL

P. Ma, K.G. Prashanth, S. Scudino, Y. Jia, H. Wang, C. Zou, Z. Wei, J. Eckert: Influence of annealing on mechanical properties of Al- 20Si processed by selective laser melting, metals 4 (2014), S. 28-36 URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, B.G. Fu, Z.J. Wei, U. Kuehn, J. Eckert: Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al20Si alloy, Journal of Alloys and Compounds 586 (2014), S. 639-644 URL

D. Marko, K.G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert: Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading, Journal of Alloys and Compounds 615 (2014), S. S382-S385 URL

M.L. Martine, G. Parzych, F. Thoss, L. Giebeler, J. Eckert: Na-Sb-Sn ternary phase diagram at room temperature for potential anode materials in sodium-ion batteries, Solid State Ionics 268 (2014), S. 261-264 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Nd-Ti system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 47 (2014), S. 136-143 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Nd-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46 (2014), S. 103-107 URL

N. Mattern, J.H. Han, K.G. Pradeep, K.C. Kim, E.M. Park, D.H. Kim, Y. Yokoyama, D. Raabe, J. Eckert: Structure of rapidly quenched (Cu0.5Zr0.5)100xAgx alloys (x = 040 at.%), Journal of Alloys and Compounds 607 (2014), S. 285-290 URL

N. Mattern: Comment on - Thermal expansion measurements by X-ray scattering and breakdown of Ehrenfest's relation in alloy liquids - Appl. Phys. Lett. 104, 191907 (2014), Applied Physics Letters 105 (2014) Nr. 25, S. 256101/1-2 URL

N. Mattern, Y. Yokoyama, A. Mizuno, J.H. Han, O. Fabrichnaya, H. Wendrock, T. Harada, S. Kohara, J. Eckert: Experimental and thermodynamic assessment of the Ce-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46 (2014), S. 213-219 URL

E.M. Mazzer, C.S. Kiminami, P. Gargarella, R.D. Cava, L.A. Basilio, C. Bolfarini, W.J. Botta, J. Eckert, T. Gustmann, S. Pauly: Atomization and selective laser melting of a Cu-Al-Ni-Mn shape memory alloy, Materials Science Forum 802 (2014), S. 343-348

R. Medda, A. Helth, P. Herre, D. Pohl, B. Rellinghaus, N. Perschmann, S. Neubauer, H. Kessler, S. Oswald, J. Eckert, J.P. Spatz, A. Gebert, E.A. Cavalcanti-Adam: Investigation of early cell-surface interactions of human mesenchymal stem cells on nanopatterned beta- type titanium niobium alloy surfaces, Interface Focus 4 (2014) Nr. 1, S. 20130046/1-11 URL

A. Meier, M. Weinberger, K. Pinkert, M. Oschatz, S. Paasch, L. Giebeler, H. Althues, E. Brunner, J. Eckert, S. Kaskel: Silicon oxycarbide-derived carbons from a polyphenylsilsequioxane precursor for supercapacitor applications, Microporous and Mesoporous Materials 188 (2014), S. 140-148 URL

D. Mikhailova, C.Y. Kuo, P. Reichel, A.A. Tsirlin, A. Efimenko, M. Rotter, M. Schmidt, Z. Hu, T.W. Pi, L.Y. Jang, Y.L. Soo, S. Oswald, L.H. Tjeng: Structure, magnetism, and valence states of Cobalt and Platinum in quasi-one-dimensional oxides A3CoPtO6 with A = Ca, Sr, The Journal of Physical Chemistry C 118 (2014), S. 5463-5469 URL

M. Moore, R. Sueptitz, A. Gebert, L. Schultz, O. Gutfleisch: Impact of magnetization state on the corrosion of sintered Nd-Fe-B magnets for e-motor applications, Materials and Corrosion 65 (2014) Nr. 9, S. 891-896 URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert: Inverse Hall-Petch like mechanical behaviour in nanophase AlCuFe quasicrystals: A new phenomenon, Acta Physica Polonica A 126 (2014) Nr. 2, S. 543-548 URL

I.V. Okulov, U. Kuehn, T. Marr, J. Freudenberger, I.V. Soldatov, L. Schultz, C.-G. Oertel, W. Skrotzki, J. Eckert: Microstructure and mechanical properties of new composite structured TiVAlCuNi alloys for spring applications, Materials Science and Engineering A 603 (2014), S. 76-83 URL

I.V. Okulov, U. Kuehn, J. Romberg, I.V. Soldatov, J. Freudenberger, L. Schultz, A. Eschke, C.-G. Oertel, W. Skrotzki, J. Eckert: Mechanical behavior and tensile/compressive strength asymmetry of ultrafine structured Ti-Nb-Ni-Co-Al alloys with bi-modal grain size distribution, Materials and Design 62 (2014), S. 14-20 URL

I.V. Okulov, M. Boenisch, U. Kuehn, W. Skrotzki, J. Eckert: Significant tensile ductility and toughness in an ultrafine-structured Ti68.8Nb13.6Co6Cu5.1Al6.5 bi-modal alloy, Materials Science and Engineering A 615 (2014), S. 457-463 URL

M. Oschatz, L. Borchardt, K. Pinkert, S. Thieme, M.R. Lohe, C. Hoffmann, M. Benusch, F.M. Wisser, C. Ziegler, L. Giebeler, M.H. Ruemmeli, J. Eckert, A. Eychmueller, S. Kaskel: Hierarchical carbide-derived carbon foams with advanced mesostructure as a versatile electrochemical energy- storage material, Advanced Energy Materials 4 (2014) Nr. 2, S. 1300645/1-9 URL

S. Oswald, U. Vogel, J. Eckert: ARXPS measurement simulation for improved data interpretation at complex Ta/Li-niobate interfaces, Surface and Interface Analysis 46 (2014), S. 1094-1098

S. Oswald, P.-F. Gostin, A. Helth, S. Abdi, L. Giebeler, H. Wendrock, M. Calin, J. Eckert, A. Gebert: XPS and AES sputter-depth profiling at surfaces of biocompatible passivated Ti-based alloys: Concentration quantification considering chemical effects, Surface and Interface Analysis 46 (2014), S. 683-688

J.M. Park, K.R. Lim, E.S. Park, S. Hong, K.H. Park, J. Eckert, D.H. Kim: Internal structural evolution and enhanced tensile plasticity of Ti-based bulk metallic glass and composite via cold rolling, Journal of Alloys and Compounds 615 (2014) Nr. S1, S. S113-S117 URL

G. Parzych, D. Mikhailova, S. Oswald, C. Taeschner, M. Ritschel, A. Leonhardt, J. Eckert, H. Ehrenberg: Improved electrochemical performance of Cu3B2O6-based conversion model electrodes by composite formation with different carbon additives, Journal of The Electrochemical Society 161 (2014), S. A1224-A1230

S. Pauly, K. Kosiba, P. Gargarella, B. Escher, K.K. Song, G. Wang, U. Kuehn, J. Eckert: Microstructural evolution and mechanical behaviour of metastable Cu-Zr-Co alloys, Journal of Material Science and Technologie 30 (2014) Nr. 6, S. 584-589 URL

K. Pinkert, M. Oschatz, L. Borchardt, M. Klose, M. Zier, W. Nickel, L. Giebeler, S. Oswald, S. Kaskel, J. Eckert: Role of surface functional groups in ordered mesoporous carbide- derived carbon/ionic liquid electrolyte double-layer capacitor interfaces, Applied Materials and Interfaces 6 (2014), S. 2922-2928

A. Plotnikov, J. Pfeifer, S. Richter, H. Kipphardt, V. Hoffmann: Determination of major nonmetallic impurities in magnesium by glow discharge mass spectrometry with a fast flow source using sintered and pressed powder samples, Analytical and Bioanalytical Chemistry 406 (2014), S. 7463-7471

K.G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert: Friction welding of Al-12Si parts produced by selective laser melting, Materials and Design 57 (2014), S. 632-637 URL

K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kuehn, M. Kamaraj, S. Scudino, J. Eckert: Tribological and corrosion properties of Al-12Si produced by selective laser melting, Journal of Materials Research 29 (2014) Nr. 17, S. 2044-2054 URL

K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Loeber, Z. Wang, A.K. Chaubey, U. Kuehn, J. Eckert: Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment, Materials Science and Engineering A 590 (2014), S. 153-160 URL

A. Raduta, M. Nicoara, C. Locovei, M. Stoica, J. Eckert: About replacement of Nickel as amorphization element for fabrication of ultra-rapidly solidified Ti-Zr alloys, Solid State Phenomena 216 (2014) Nr. 3, S. 3-10

G.K. Rane, S. Menzel, T. Gemming, J. Eckert: Microstructure, electrical resistivity and stresses in sputter deposited W and Mo films and the influence of the interface on bilayer properties, Thin Solid Films 571 (2014), S. 1-8 URL

J. Ren, C. Chen, G. Wang, W.-S. Cheung, B. Sun, N. Mattern, S. Siegmund, J. Eckert: Various sizes of sliding event bursts in the plastic flow of metallic glasses based on a spatiotemporal dynamic model, Journal of Applied Physics 116 (2014), S. 33520/1-3 URL

K. Sakaushi, E. Hosono, G. Nickerl, H. Zhou, S. Kaskel, J. Eckert: Bipolar porous polymeric frameworks for low-cost, high-power, long-life all-organic energy storage devices, Journal of Power Sources 245 (2014), S. 553-556 URL

A.E. Sarapulova, B. Bazarov, T. Namsaraeva, S. Dorzhieva, J. Bazarova, V. Grossman, A.A. Bush, I. Antonyshyn, M. Schmidt, A.M.T. Bell, M. Knapp, H. Ehrenberg, J. Eckert, D. Mikhailova: Possible piezoelectric materials CsMZr0.5(MoO4)3 (M = Al, Sc, V, Cr, Fe, Ga, In) and CsCrTi0.5(MoO4)3: Structure and physical properties, The Journal of Physical Chemistry C 118 (2014), S. 1763-1773 URL

T. Schied, H. Ehrenberg, J. Eckert, S. Oswald, M. Hoffmann, F. Scheiba: An O2 transport study in porous materials within the Li-O2 -system, Journal of Power Sources 269 (2014), S. 825-833 URL

C. Schliebe, T. Gemming, L. Mertens, M. Mehring, H. Lang: Twin polymerization: A unique and efficient tool for supporting silver nanoparticles on highly porous carbon and cilica, European Journal of Inorganic Chemistry (2014) Nr. 20, S. 3161-3163

H. Shakur Shahabi, S. Scudino, U. Kuehn, J. Eckert: Metallic glass-steel composite with improved compressive plasticity, Materials and Design 59 (2014), S. 241-245 URL

M. Shaygan, T. Gemming, V. Bezugly, Cuniberti G., Lee J.-S., M. Meyyappan: In situ observation of melting behavior of ZnTe nanowires, The Journal of Physical Chemistry 118 (2014), S. 15061-15067 URL

K. Snyder, B. Raguz, W. Hoffbauer, R. Glaum, H. Ehrenberg, M. Herklotz: Lithium Copper (I) orthophosphates Li3-xCuxPO4: Synthesis, crystal structures, and electrochemical properties, Zeitschrift fuer anorganische und allgemeine Chemie 640 (2014) Nr. 5, S. 944-951 URL

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert: FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction, Journal of Applied Physics 115 (2014) Nr. 5, S. 53520/1-9 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Retarding the corrosion of iron by inhomogeneous magnetic fields, Materials and Corrosion 65 (2014) Nr. 8, S. 803-808 URL

A.H. Taghvaei, M. Stoica, I. Kaban, J. Bednarcik, J. Eckert: Thermal and soft magnetic properties of Co40Fe22Ta8B30 glassy particles: In-situ X-ray diffraction and magnetometry studies, Journal of Applied Physics 116 (2014), S. 54904/1-8 URL

A.H. Taghvaei, M. Stoica, J. Bednarcik, I. Kaban, H.S. Shahabi, M.S. Khoshkhoo, K. Janghorban, J. Eckert: Influence of ball milling on atomic structure and magnetic properties of Co40Fe22Ta8B30 glassy alloy, Materials Characterization 92 (2014), S. 96-105 URL

A.H. Taghvaei, H.S. Shahabi, J. Bednarcik, J. Eckert: Fabrication and characterization of Co40Fe22Ta8-xYxB30 (x=0, 2.5, 4, 6, and 8) metallic glasses with high thermal stability and good soft magnetic properties, Journal of Applied Physics 116 (2014), S. 184904/1-5 URL

A.H. Taghvaei, M. Stoica, K. Song, K. Janghorban, J. Eckert: Crystallization kinetics of Co40Fe22Ta8B30 glassy alloy with high thermal stability and soft magnetic properties, Journal of Alloys and Compounds 605 (2014), S. 199-207 URL

J. Tan, G. Wang, Z.Y. Liu, J. Bednarcik, Y.L. Gao, Q.J. Zhai, N. Mattern, J. Eckert: Correlation between atomic structure evolution and strength in a bulk metallic glass at cryogenic temperature, Scientific Reports 4 (2014), S. 3897/1-7 URL

A. Teresiak, M. Uhlemann, J. Thomas, J. Eckert, A. Gebert: Influence of Co and Pd on the formation of nanostructured LaMg2Ni and its hydrogen reactivity, Journal of Alloys and Compounds 582 (2014), S. 647-658 URL

F. Thoss, L. Giebeler, K. Weisser, J. Feller, J. Eckert: Preparation and cycling performance of Iron or Iron Oxide containing amorphous Al-Li alloys as electrodes, Inorganics 2 (2014), S. 674-682 URL

H. Turnow, H. Wendrock, S. Menzel, T. Gemming, J. Eckert: Synthesis and characterization of amorphous Ni-Zr thin films, Thin Solid Films 561 (2014), S. 48-52 URL

A. Undisz, R. Hanke, K.E. Freiberg, V. Hoffmann, M. Rettenmayr: The effect of heating rate on the surface chemistry of NiTi, Acta Biomaterialia 10 (2014), S. 4919-4923 URL

U. Vogel, T. Gemming, J. Eckert, S. Oswald: Analysis of surface pre-treatment for SAW substrate material (LiNbO3) and deposited thin films of Ta/Ti using ARXPS, Surface and Interface Analysis 46 (2014), S. 1033-1038

Z. Wang, J. Tan, B.A. Sun, S. Scudino, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert: Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles, Materials Science and Engineering A 600 (2014), S. 53-58 URL

Z. Wang, J. Tan, S. Scudino, B.A. Sun, R.T. Qu, J. He, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert: Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses, Advanced Powder Technology 25 (2014) Nr. 2, S. 635-639 URL

G. Wang, S. Pauly, S. Gorantla, N. Mattern, J. Eckert: Plastic flow of a Cu50Zr45Ti5 bulk metallic glass composite, Journal of Material Science and Technologie 30 (2014) Nr. 6, S. 609-615 URL

Z. Wang, K.G. Prashanth, S. Scudino, A.K. Chaubey, D.J. Sordelet, W.W. Zhang, Y.Y. Li, J. Eckert: Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles, Journal of Alloys and Compounds 586 (2014) Nr. Suppl. 1, S. S419-S422 URL

Z. Wang, K.G. Prashanth, S. Scudino, J. He, W.W. Zhang, Y.Y. Li, M. Stoica, G. Vaughan, D.J. Sordelet, J. Eckert: Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders, Intermetallics 46 (2014), S. 97-102 URL

Z. Weiss, E.B.M. Steers, J.C. Pickering, V. Hoffmann, S. Mushtaq: Excitation of higher levels of singly charged copper ions in argon and neon glow discharges, Journal of Analytical Atomic Spectrometry 29 (2014) Nr. 12, S. 2256-2261 URL

G. Wittenburg, G. Lauer, S. Oswald, D. Labudde, C.M. Franz: Nanoscale topographic changes on sterilized glass surfaces affect cell adhesion and spreading, Journal of Biomedical Materials Research Part A 102 A (2014), S. 2755-2766

C. Wolf-Brandstetter, S. Oswald, S. Bierbaum, H.-P. Wiesmann, D. Scharnweber: Influence of pulse ratio on codeposition of copper species with calcium phosphate coatings on titanium by means of electrochemically assisted deposition, Journal of Biomedical Materials Research Part B - Applied Biomaterials 102 B (2014) Nr. 1, S. 160-172 URL

J. Zhao, M. Shaygan, J. Eckert, M. Meyyappan, M.H. Ruemmeli: A growth mechanism for free-standing vertical Graphene, Nano Letters 14 (2014), S. 3064-3071 URL

L.-F. Zhu, M. Friak, A. Udyansky, D. Ma, A. Schlieter, U. Kuehn, J. Eckert, J. Neugebauer: Ab initio based study of finite-temperature structural, elastic and thermodynamic properties of FeTi, Intermetallics 45 (2014), S. 11-17 URL

K. Zhuravleva, R. Mueller, L. Schultz, J. Eckert, A. Gebert, M. Bobeth, G. Cuniberti: Determination of the Youngs modulus of porous beta- type Ti40Nb by finite element analysis, Materials and Design 64 (2014), S. 1-8 URL

K. Zhuravleva, M. Boenisch, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Phase transformations in ball-milled Ti-40Nb and Ti-45Nb powders upon quenching from the beta--phase region, Powder Technology 253 (2014), S. 166-171 URL

M. Zier, F. Scheiba, S. Oswald, J. Thomas, D. Goers, T. Scherer, M. Klose, H. Ehrenberg, J. Eckert: Lithium dendrite and solid electrolyte interphase investigation using OsO4, Journal of Power Sources 266 (2014), S. 198-207 URL

2013

R. Adam, D. Wadewitz, W. Gruner, V. Klemm, H. Ehrenberg, D. Rafaja: Phase and microstructure development in the conversion type electrodes for Li-Ion batteries based on the Cu-Fe-O system, Journal of The Electrochemical Society 160 (2013) Nr. 9, S. A1594-A1603

F. Ali, S. Scudino, S.M. Gorantla, V.C. Srivastava, H.R. Shahid, V. Uhlenwinkel, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, J. Eckert: Mechanically driven phase transformation in single phase Al62.5Cu25Fe12.5 quasi-crystals: Effect of milling intensity, Acta Materialia 61 (2013), S. 3819-3830 URL

A. Bachmatiuk, R.G. Mendes, C. Hirsch, J. Jaehne, M.R. Lohe, J. Grothe, S. Kaskel, L. Fu, R. Klingeler, J. Eckert, P. Wick, M.H. Ruemmeli: Few-layer graphene shells and nonmagnetic encapsulates: A versatile and nontoxic carbon nanomaterial, ACS nano 7 (2013) Nr. 12, S. 10552-10562 URL

J.R. Bautista-Quijano, F. Aviles, J.V. Cauich-Rodrigueza, R. Schoenfelder, A. Bachmatiuk, T. Gemming, M.H. Ruemmeli: Tensile piezoresistivity and disruption of percolation in singlewall and multiwall carbon nanotube/ polyurethane composites, Synthetic Metals 185-186 (2013), S. 96-102 URL

A. Behler, N. Teichert, B. Dutta, A. Waske, T. Hickel, A. Auge, A. Huetten, J. Eckert: Thickness dependent exchange bias in martensitic epitaxial Ni-Mn-Sn thin films, AIP Advances 3 (2013) Nr. 12, S. 122112/1-9 URL

A. Bhaskar, W. Gruner, D. Mikhailova, H. Ehrenberg: Thermal stability of Li1- delta M0.5Mn1.5O4 (M = Fe, Co, Ni) cathodes in different states of delithiation delta, RSC Advances 3 (2013) Nr. 17, S. 5909-5916

M. Boenisch, M. Calin, T. Waitz, A. Panigrahi, M. Zehetbauer, A. Gebert, W. Skrotzki, J. Eckert: Thermal stability and phase transformations of martensitic Ti-Nb alloys, Science and Technology of Advanced Materials 14 (2013), S. 55004/1-9 URL

N. Brun, K. Sakaushi, L. Yu, L. Giebeler, J. Eckert, M.M. Titirici: Hydrothermal carbon-based nanostructured hollow spheres as electrode materials for high-power lithium-sulfur batteries, Physical Chemistry Chemical Physics 15 (2013), S. 6080-6087 URL

M. Calin, A. Gebert, A.C. Ghinea, P.F. Gostin, S. Abdi, C. Mickel, J. Eckert: Designing biocompatible Ti-based metallic glasses for implant applications, Materials Science and Engineering C 33 (2013) Nr. 2, S. 875-883 URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: Synthesis and characterization of nanocrystallineMg-7.4%Al powders produced by mechanical alloying, Metals 3 (2013) Nr. 1, S. 58-68 URL

A.E. Chivu, S. Ciuca, D. Bojin, G.E. Stan, A. Gebert, J. Eckert: Electrochemical deposited hydroxyapatite on pre-treated Cp-Ti surfaces, Metalurgia International 18 (2013) Nr. Special Issue, 1, S. 34-38

F. de Clippel, A.L. Khan, A. Cano-Odena, M. Dusselier, K. Vanherck, L. Peng, S. Oswald, L. Giebeler, S. Corthals, B. Kenens, J.F.M. Denayer, P.A. Jacobs, I.F.J. Vankelecom, B.F. Sels: CO2 reverse selective mixed matrix membranes for H2 purification by incorporation of carbon-silica fillers, Journal of Materials Chemistry A 1 (2013), S. 945-953 URL

J.W. Cui, M. Calin, J. Eckert, Z.F. Zhang: Tensile fracture dynamics and intrinsic plasticity of metallic glasses, Applied Physics Letters 102 (2013) Nr. 3, S. 31908/1-4 URL

J. Ellison, K. Tschulik, E.J.E. Stuart, K. Jurkschat, D. Omanovic, M. Uhlemann, A. Crossley, R.G. Compton: Get more out of your data: A new approach to agglomeration and aggregation studies using nanoparticle impact experiments, Chemistry open 2 (2013), S. 69-75 URL

F.S. Fedorov, I. Moench, C. Mickel, K. Tschulik, B. Zhao, M. Uhlemann, A. Gebert, J. Eckert: Electrochemical deposition of Co(Cu)/Cu multilayered nanowires, Journal of the Electrochemical Society 160 (2013), S. D13-D19 URL

F.S. Fedorov, J. Linnemann, K. Tschulik, L. Giebeler, M. Uhlemann, A. Gebert: Capacitance performance of cobalt hydroxide-based capacitors with utilization of near-neutral electrolytes, Electrochimica Acta 90 (2013), S. 166-170 URL

J. Fornell, E. Pellicer, N. Van Steenberge, S. Gonzalez, A. Gebert, S. Surinach, M.D. Baro, J. Sort: Improved plasticity and corrosion behavior in Ti-Zr-Cu-Pd metallic glass with minor addition of Nb: An alloy composition intended for biomedical applications, Materials Science and Engineering A 559 (2013), S. 159-164 URL

P. Gargarella, S. Pauly, K.K. Song, J. Hu, N.S. Barekar, M. Samadi Khoshkhoo, A. Teresiak, H. Wendrock, U. Kuehn, C. Ruffing, E. Kerscher, J. Eckert: Ti-Cu-Ni shape memory bulk metallic glass composites, Acta Materialia 61 (2013) Nr. 1, S. 151-162 URL

C. Georgi, A. Hildebrandt, A. Tuchscherer, S. Oswald, H. Lang: Hexacarbonyl (Trimethylsilyl Ethyne) dicobalt as MOCVD precursor for thin cobalt layer formation, Zeitschrift fuer anorganische und allgemeine Chemie 639 (2013) Nr. 14, S. 2532-2535 URL

M. Goettlicher, M. Rohnke, A. Helth, T. Leichtweiss, T. Gemming, A. Gebert, J. Eckert, J. Janek: Controlled surface modification of Ti-40Nb implant alloy by electrochemically assisted inductively coupled RF plasma oxidation, Acta Biomaterialia 9 (2013), S. 9201-9210 URL

M. Gogebakan, C. Kursun, J. Eckert: Formation of new Cu-based nanocrystalline powders by mechanical alloying technique, Powder Technology 247 (2013), S. 172-177 URL

P.F. Gostin, A. Helth, A. Voss, R. Sueptitz, M. Calin, J. Eckert, A. Gebert: Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy, Journal of Biomedical Materials Research Part B 101 (2013) Nr. 2, S. 269-278

T. Gross, L. Giebeler, C. Hess: Novel in situ cell for Raman diagnostics of lithium-ion batteries, Review of Scientific Instruments 84 (2013) Nr. 7, S. 73109/1-6 URL

J.H. Han, N. Mattern, I. Kaban, D. Holland-Moritz, J. Bednarcik, R. Nowak, N. Sobczak, D.H. Kim, J. Eckert: Phase separation in ternary Co-Gd-Ti liquids, Journal of Physics - Condensed Matter 25 (2013) Nr. 24, S. 245104/1-7 URL

J. He, N. Mattern, J. Tan, J.Z. Zhao, I. Kaban, Z. Wang, L. Ratke, D.H. Kim, W.T. Kim, J. Eckert: A bridge from monotectic alloys to liquid-phase-separated bulk metallic glasses: Design, microstructure and phase evolution, Acta Materialia 61 (2013), S. 2102-2112 URL

A. Helth, U. Siegel, U. Kuehn, T. Gemming, W. Gruner, S. Oswald, T. Marr, J. Freudenberger, J. Scharnweber, C.-G. Oertel, W. Skrotzki, L. Schultz, J. Eckert: Influence of boron and oxygen on the microstructure and mechanical properties of high-strength Ti66Nb13Cu8Ni6.8Al6.2 alloys, Acta Materialia 61 (2013) Nr. 9, S. 3324-3334 URL

M. Herklotz, F. Scheiba, M. Hinterstein, K. Nikolowski, M. Knapp, A.-C. Dippel, L. Giebeler, J. Eckert, H. Ehrenberg: Advances in in situ powder diffraction of battery materials: A case study of the new beamline P02.1 at DESY, Hamburg, Journal of Applied Crystallography 46 (2013), S. 1117-1127 URL

H. Hermann, A. Elsner, D. Stoyan: Surface area and volume fraction of random open-pore systems, Modelling and Simulation in Materials Science and Engineering 21 (2013), S. 85005/1-17 URL

J. Hosko, I. Janotova, P. Svec, G. Vlasak, I. Matko, D. Janickovic, T. Gemming, M. Stoica, Svec Sr., P.: Magnetostriction behavior of pseudobulk CoFeBSiNb(Ga) systems, Journal of Superconductivity and Novel Magnetism 26 (2013) Nr. 4, S. 797-800

J. Hufenbach, K. Kunze, L. Giebeler, T. Gemming, H. Wendrock, C. Baldauf, U. Kuehn, W. Hufenbach, J. Eckert: The effect of boron on microstructure and mechanical properties of high-strength cast FeCrVC, Materials Science and Engineering A 586 (2013), S. 267-275 URL

I. Ibrahim, Y. Zhang, A. Popov, L. Dunsch, B. Buechner, G. Cuniberti, M.H. Ruemmeli: Growth of all-carbon horizontally aligned single-walled carbon nanotubes nucleated from fullerene-based structures, Nanoscale Research Letters 8 (2013), S. 265/1-6 URL

I. Janotova, J. Hosko, P. Svec, I. Matko, D. Janickovic, P. Svec Sr, T. Gemming, M. Stoica: The study of structure of Fe-B-P based metallic glasses, Applied Surface Science 269 (2013), S. 102-105 URL

P. Jovari, Y. Sutou, I. Kaban, Y. Saito, J. Koike: Fourfold coordinated Te atoms in amorphous GeCu2Te3 phase change material, Scripta Materialia 68 (2013), S. 122-125 URL

P. Jovari, A. Piarristeguy, R. Escalier, I. Kaban, J. Bednarcik, A. Pradel: Short range order and stability of amorphous GexTe100-x alloys ..., Journal of Physics - Condensed Matter 25 (2013) Nr. 19, S. 195401/1-9 URL

I. Kaban, P. Jovari, V. Kokotin, O. Shuleshova, B. Beuneu, K. Saksl, N. Mattern, J. Eckert, A.L. Greer: Local atomic arrangements and their topology in Ni-Zr and Cu-Zr glassy and crystalline alloys, Acta Materialia 61 (2013) Nr. 7, S. 2509-2520 URL

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, T. Gemming, H. Wendrock, J. Eckert: Size evaluation of nanostructured materials, Materials Letters 108 (2013), S. 343-345 URL

D.H. Kim, W.T. Kim, E.S. Park, N. Mattern, J. Eckert: Phase separation in metallic glasses, Progress in Materials Science 58 (2013) Nr. 8, S. 1103-1172 URL

S.Y. Kim, S.J. Kim, S.S. Jee, J.M. Park, K.H. Park, S.C. Park, E.A. Cho, J.H. Lee, I.Y. Song, S.M. Lee, I.T. Han, K.R. Lim, W.T. Kim, J.C. Park, J. Eckert, D.H. Kim, E.-S. Lee: Capillary flow of amorphous metal for high performance electrode, Scientific Reports 3 (2013), S. 2185/1-7 URL

K.C. Kim, K.R. Lim, E.S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Thermal stability of amorphous oxide in Al87Ni3Y10 metallic glass, Corrosion Science 77 (2013), S. 1-5 URL

J. Koenig, K. Tschulik, L. Buettner, M. Uhlemann, J. Czarske: Analysis of the electrolyte convection inside the concentration boundary layer during structured electrodeposition of copper in high magnetic gradient fields, Analytical Chemistry 85 (2013), S. 3087-3094 URL

K. Kosiba, P. Gargarella, S. Pauly, U. Kuehn, J. Eckert: Predicted glass-forming ability of Cu-Zr-Co alloys and their crystallization behavior, Journal of Applied Physics 113 (2013), S. 123505/1-4 URL

N.V. Kuratieva, M. Banki, A.A. Tsirlin, J. Eckert, Ehrenberg H., D. Mikhailova: New lithium copper borates with BO3 triangles: Li6CuB4O10, Li3CuB3O7, Li8Cu7B14O32, and Li2Cu9B12O28, Inorganic Chemistry 52 (2013), S. 13974-13983 URL

N. Kyzyltas-Yavuz, M. Herklotz, A.H. Hashem, H.M. Abuzeid, B. Schwarz, H. Ehrenberg, A. Mauger, C.M. Julien: Synthesis, structural, magnetic and electrochemical properties ofLiNi1/3Mn1/3Co1/3O2prepared by a sol-gel method using table sugar aschelating agent, Electrochimica Acta 113 (2013), S. 313-321 URL

D. Lahiri, P.K. Gill, S. Scudino, C. Zhang, V. Singh, J. Karthikeyan, N. Munroe, S. Seal, A. Agarwal: Cold sprayed aluminum based glassy coating: Synthesis, wear and corrosion properties, Surface and Coatings Technology 232 (2013), S. 33-40 URL

M. Lepple, R. Adam, D.M. Cupid, P. Franke, T. Bergfeldt, D. Wadewitz, D. Rafaja, H.J. Seifert: Thermodynamic investigations of copper oxides used as conversion type electrodes in lithium ion batteries, Journal of Materials Science 48 (2013) Nr. 17, S. 5818-5826 URL

C.J. Li, J. Tan, X.K. Zhu, Y. Zhang, M. Stoica, U. Kuehn, J. Eckert: On the transformation-induced work-hardening behavior of Zr47.5Co47.5Al5 ultrafine-grained alloy, Intermetallics 35 (2013), S. 116-119 URL

C.J. Li, J. Tan, G. Wang, J. Bednarcik, X.K. Zhu, Y. Zhang, M. Stoica, U. Kuehn, J. Eckert: Enhanced strength and transformation-induced plasticity in rapidly solidified Zr-Co- (Al) alloys, Scripta Materialia 68 (2013) Nr. 11, S. 897-900 URL

K.R. Lim, J.M. Park, S.J. Kim, E.-S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Enhancement of oxidation resistance of the supercooled liquid in Cu-Zr-based metallic glass by forming an amorphous oxide layer with high thermal stability, Corrosion Science 66 (2013), S. 1-4 URL

K.R. Lim, J.M. Park, S.S. Jee, S.Y. Kim, S.J. Kim, E.-S. Lee, W.T. Kim, A. Gebert, J. Eckert, D.H. Kim: Effect of thermal stability of the amorphous substrate on the amorphous oxide growth on ZrAl(Cu,Ni) metallic glass surfaces, Corrosion Science 73 (2013), S. 1-6 URL

L. Loeber, C. Flache, R. Petters, U. Kuehn, J. Eckert: Comparison of different post processing technologies for SLM generated 316l steel parts, Rapid Prototyping Journal 19 (2013) Nr. 3, S. 173-179

Q. Luo, B. Schwarz, N. Mattern, J. Shen, J. Eckert: Roles of hydrogenation, annealing and field in the structure and magnetic entropy change of Tb-based bulk metallic glasses, AIP Advances 3 (2013), S. 32134/1-17 URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, K.K. Song, M. Samadi Khoshkhoo, Z.J. Wei, U. Kuehn, J. Eckert: Structure of GP zones in Al-Si matrix composites solidified under high pressure, Materials Letters 109 (2013), S. 1-4 URL

G.Z. Ma, B.A. Sun, S. Pauly, K.K. Song, U. Kuehn, D. Chen, J. Eckert: Effect of Ti substitution on glass-forming ability and mechanical properties of a brittle CuZrAl bulk metallic glass, Materials Science and Engineering A 563 (2013), S. 112-116 URL

G.Z. Ma, K.K. Song, B.A. Sun, Z.J. Yan, U. Kuehn, D. Chen, J. Eckert: Effect of cold-rolling on the crystallization behavior of a CuZr-based bulk metallic glass, Journal of Materials Science 48 (2013), S. 6825-6832 URL

N. Mattern, J. Bednarcik, H.-P. Liermann, J. Eckert: Structural behaviour of Pd40Cu30Ni10P20 metallic glass under high pressure, Intermetallics 38 (2013), S. 9-13 URL

N. Mattern, J. Bednarcik, M. Stoica, J. Eckert: Temperature dependence of the short-range order of Cu65Zr35 metallic glass, Intermetallics 32 (2013), S. 51-56 URL

N. Mattern, J.H. Han, O. Fabrichnaya, M. Zinkevich, W. Loeser, J. Werner, R. Nowak, I. Kaban, O. Shuleshova, D. Holland-Moritz, J. Bednarcik, N. Sobczak, J. Eckert: Experimental and thermodynamic assessment of the Gd-Ti system, CALPHAD: Computer Coupling of Phase Diagramsand Thermochemistry 42 (2013), S. 19-26 URL

D. Mikhailova, A. Thomas, S. Oswald, W. Gruner, N.N. Bramnik, A.A. Tsirlin, D.M. Trots, A. Senyshyn, J. Eckert, H. Ehrenberg: Structural changes in the LiCrMnO4 cathode material during electrochemical Li extraction and insertion, Journal of the Electrochemical Society 160 (2013), S. A3082-A3089 URL

S. Muehlenhoff, G. Mutschke, M. Uhlemann, X. Yang, S. Odenbach, J. Froehlich, K. Eckert: On the homogenization of the thickness of Cu deposits bymeans of MHD convection within small dimension cells, Electrochemistry Communications 36 (2013), S. 80-83 URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert: Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals, Applied Physics Letters 103 (2013) Nr. 20, S. 201914/1-5 URL

S. Niyomsoan, P. Gargarella, M. Stoica, M.S. Khoshkoo, U. Kuehn, J. Eckert: Phase formation in rapid solidified Ag-Y alloys, Journal of Applied Physics 113 (2013) Nr. 10, S. 104308/1-9 URL

I.V. Okulov, S. Pauly, U. Kuehn, P. Gargarella, T. Marr, J. Freudenberger, L. Schultz, J. Scharnweber, C.-G. Oertel, W. Skrotzki, J. Eckert: Effect of microstructure on the mechanical properties of as-cast TiNbAlCuNi alloys for biomedical application, Materials Science and Engineering C 33 (2013), S. 4795-4801 URL

S. Pauly, L. Loeber, R. Petters, M. Stoica, S. Scudino, U. Kuehn, J. Eckert: Processing metallic glasses by selective laser melting, Materials Today 16 (2013) Nr. 1-2, S. 37-41 URL

K. Pinkert, L. Giebeler, M. Herklotz, S. Oswald, J. Thomas, A. Meier, L. Borchardt, L. Kaskel, H. Ehrenberg, J. Eckert: Functionalised porous nanocomposites: Amultidisciplinary approach to investigate designed structures for supercapacitor applications, Journal of Materials Chemistry A 1 (2013) Nr. 5, S. 4904-4910 URL

L. Ratkai, I. Kaban, T. Wagner, J. Kolar, I. Valkova, B. Beuneu, P. Jovari: Silver environment and covalent network rearrangement in GeS3-Ag glasses, Journal of Physics - Condensed Matter 25 (2013) Nr. 45, S. 454210/1-7 URL

L. Reichel, S. Oswald, S. Faehler, L. Schultz, K. Leistner: Electrochemically driven variation of magnetic properties in ultrathin CoPt films, Journal of Applied Physics 113 (2013), S. 143904/1-7 URL

S.A. Rounaghi, H. Eshghi, A.R. Kiani Rashid, J. Vahdati Khaki, M. Samadi Khoshkhoo, S. Scudino, J. Eckert: Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile, Journal of Solid State Chemistry 198 (2013), S. 542-547 URL

M.H. Ruemmeli, M. Zeng, S. Melkhanova, S. Gorantla, A. Bachmatiuk, L. Fu, C. Yan, S. Oswald, R.G. Mendes, D. Makarov, O. Schmidt, J. Eckert: Insights into the early growth of homogeneous single-layer graphene over Ni-Mo binary substrates, Chemistry of Materials 25 (2013), S. 3880-3887 URL

M.H. Ruemmeli, S. Gorantla, A. Bachmatiuk, J. Phieler, N. Geissler, I. Ibrahim, J. Pang, J. Eckert: On the role of vapor trapping for Chemical Vapor Deposition (CVD) grown graphene over copper, Chemistry of Materials 25 (2013), S. 4861-4866 URL

K. Sakaushi, G. Nickerl, H.C. Kandpal, L. Cano-Cortes, T. Gemming, J. Eckert, S. Kaskel, J. van den Brink: Polymeric frameworks as organic semiconductors with controlled electronic properties, The Journal of Physical Chemistry Letters 4 (2013), S. 2977-2981 URL

K. Sakaushi, E. Hosono, G. Nickerl, T. Gemming, H. Zhou, S. Kaskel, J. Eckert: Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device, nature communications 4 (2013), S. 1485/1-7 URL

K. Sakaushi, J. Thomas, S. Kaskel, J. Eckert: Aqueous solution process for the synthesis and assembly of nanostructured one-dimensional alpha-MoO3 electrode materials, Chemistry of Materials 25 (2013), S. 2557-2563 URL

B. Schwarz, N. Mattern, O. Shuleshova, J. Eckert: Liquid- liquid demixing and microstructure of CoeCueZr alloys with low Zr content, Intermetallics 32 (2013), S. 250-258 URL

S. Scudino, J.Y. Kim, K.G. Prashanth, M.H. Lee, B.S. Kim, U. Kuehn, J. Eckert: Production of customized hybrid porous structures by powder metallurgy of Ni59Zr20Ti16Si2Sn3 glassy powders, Journal of Materials Research 28 (2013) Nr. 17, S. 2490-2498 URL

A. Seifoddini, M. Stoica, M. Nili-Ahmadabadi, S. Heshmati-Manesh, U. Kuehn, J. Eckert: New (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloys with enhanced glass-forming ability and large compressive strain, Materials Science and Engineering A 560 (2013), S. 575-582 URL

K.K. Song, S. Pauly, Y. Zhang, B.A. Sun, J. He, G.Z. Ma, U. Kuehn, J. Eckert: Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites, Materials Science and Engineering A 559 (2013), S. 711-718 URL

K.K. Song, S. Pauly, B.A. Sun, J. Tan, M. Stoica, U. Kuehn, J. Eckert: Correlation between the microstructures and the deformation mechanisms of CuZr based bulk metallic glass composites, AIP Advances 3 (2013), S. 12116/1-8 URL

K.K. Song, S. Pauly, Z. Wang, U. Kuehn, J. Eckert: Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys, Materials Science and Engineering A 587 (2013), S. 372-380 URL

M. Spindler, B. Uhlig, S.B. Menzel, C. Huck, T. Gemming, J. Eckert: Local temperature determination in power loaded surface acoustic wave structures using Raman spectroscopy, Journal of Applied Physics 114 (2013), S. 164317/1-5 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch: Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system, Journal of Alloys and Compounds 578 (2013), S. 471-480 URL

R. Sueptitz, P. Dunne, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Electrochemical micromachining of passive electrodes, Electrochimica Acta 109 (2013), S. 562-569 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, J. Eckert, A. Gebert: Retarding the corrosion of iron by inhomogeneous magnetic fields, Materials and Corrosion 63 (2013) Nr. online first URL

R. Sueptitz, S. Sawatzki, M. Moore, M. Uhlemann, O. Gutfleisch, A. Gebert: Effect of DyF3 on the corrosion behavior of hot-pressed Nd-Fe-B permanent magnets, Materials and Corrosion online first (2013) URL

B.A. Sun, S. Pauly, J. Hu, W.H. Wang, U. Kuehn, J. Eckert: Origin of intermittent plastic flow and instability of shear band sliding in bulk metallic glasses, Physical Review Letters 110 (2013) Nr. 22, S. 225501/1-5 URL

A.H. Taghvaei, M. Stoica, K.G. Prashanth, J. Eckert: Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties, Acta Materialia 61 (2013), S. 6609-6621 URL

A.H. Taghvaei, M. Stoica, F. Mazaleyrat, K.G. Prashanth, M. Samadi Khoshkhoo, K. Janghorban, J. Eckert: Microstructure and magnetic properties of soft magnetic composites based on silicon resin coated Co40Fe22Ta8B30 glassy powders, Intermetallics 43 (2013), S. 1-7 URL

A.M. Taghvaei, M. Stoica, M.S. Khoshkhoo, I. Kaban, J. Bednarcik, P. Jovari, K. Janghorban, J. Eckert: DSC, XRD and TEM characterization of glassy Co40Fe22Ta8B30 alloy with very high thermal stability, Materials Letters 93 (2013), S. 322-325 URL

J. Tan, F.S. Pan, C.J. Li, J.F. Wang, J. Eckert: Effect of Fe on crystallization process of Zr-Co-Al-(Fe) bulk metallic glasses, Materials Science Forum 745-746 (2013), S. 734-739

J. Thomas, J. Ramm, T. Gemming: Density measurement of thin layers by electron energy loss spectroscopy (EELS), Micron 50 (2013), S. 57-61 URL

J. Torrens-Serra, P. Bruna, M. Stoica, S. Roth, J. Eckert: Glass forming ability, thermal stability, crystallization and magnetic properties of [(Fe,Co,Ni)0.75Si0.05B0.20]95Nb4Zr1 metallic glasses, Journal of Non-Crystalline Solids 367 (2013), S. 30-36 URL

J. Torrens-Serra, M. Stoica, J. Bednarcik, J. Eckert, S. Kustov: Elastic and anelastic properties close to the curie temperature of Fe-based bulk metallic glass, Applied Physics Letters 102 (2013) Nr. 4, S. 41904/1-4 URL

M. Uhlemann, K. Tschulik, A. Gebert, G. Mutschke, J. Froehlich, A. Bund, X. Yang, K. Eckert: Structured electrodeposition in magnetic gradient fields, The European Physical Journal - Special Topics 220 (2013) Nr. 1, S. 287-302

D. Wadewitz, W. Gruner, M. Herklotz, M. Klose, L. Giebeler, A. Voss, J. Thomas, T. Gemming, J. Eckert, H. Ehrenberg: Investigation of copper-cobalt-oxides as model systems for composite interactions in conversion-type electrodes for Lithium-Ion batteries, Journal of the Electrochemical Society 160 (2013) Nr. 8, S. A1333-A1339 URL

J. Wang, M. Zeng, L. Tan, B. Dai, Y. Deng, M. Ruemmeli, H. Xu, Z. Li, S. Wang, L. Peng, J. Eckert, L. Fu: High-mobility graphene on liquid p-block elements by ultra-low-loss CVD growth, Scientific Reports 3 (2013), S. 2670/1-7 URL

A. Waske, B. Schwarz, N. Mattern, J. Eckert: Magnetocaloric (FeB)-based amorphous alloys, Journal of Magnetism and Magnetic Materials 329 (2013), S. 101-104 URL

S. Wei, F. Yang, J. Bednarcik, I. Kaban, O. Shuleshova, A. Meyer, R. Busch: Liquid-liquid transition in a strong bulk metallic glass-forming liquid, nature communications 4 (2013), S. 2083/1-9 URL

W. Xu, D.P. Edwards, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: Promoting nano/ultrafine-duplex structure via accelerated alpha precipitation in a beta-type titanium alloy severely deformed by high-pressure torsion, Scripta Materialia 68 (2013) Nr. 1, S. 67-70 URL

Z. Yan, W. Hao, Y. Hu, K. Song, M. Stoica, S. Scudino, J. Eckert: Evidence for viscous flow nature in Zr60Al15Ni25 metallic glass subjected to cold rolling, Applied Physics Letters 103 (2013), S. 21907/1-5 URL

L. Yu, N. Brun, K. Sakaushi, J. Eckert, M.M. Titirici: Hydrothermal nanocasting: Synthesis of hierarchically porous carbon monoliths and their application in lithiumsulfur batteries, Carbon 61 (2013), S. 245-253 URL

Y. Zhang, N. Mattern, J. Eckert: Strong correlation of atomic thermal motion in the first coordination shell of a Cu-Zr metallic glass, Applied Physics Letters 102 (2013) Nr. 8, S. 81901/1-4 URL

K. Zhuravleva, M. Boenisch, K.G. Prashanth, U. Hempel, A. Helth, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert: Production of porous beta-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing, materials 6 (2013), S. 5700-5712 URL

K. Zhuravleva, S. Scudino, M.S. Khoshkhoo, A. Gebert, M. Calin, L. Schultz, J. Eckert: Mechanical alloying of beta- Type Ti-Nb for biomedical applications, Advanced Engineering Materials 15 (2013) Nr. 4, S. 262-268

K. Zhuravleva, A. Chivu, A. Teresiak, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications, Materials Science and Engineering C 33 (2013) Nr. 4, S. 2280-2287 URL

2012

D. Abou-Ras, B. Marsen, T. Rissom, F. Frost, H. Schulz, F. Bauer, V. Efimova, V. Hoffmann, A. Eicke: Enhancements in specimen preparation of Cu (In,Ga)(S,Se) 2 thin films, Micron 43 (2012), S. 470-474 URL

F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert: Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites, Journal of Alloys and Compounds 536 (2012) Nr. Suppl. 1, S. S130-S133 URL

D. Beitelschmidt, S. Scudino, G. K. Prashanth, U. Kuehn, J. Eckert: Mechanical behavior of the cold-rolled Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 metallic glass-quasicrystalline composite, International Journal of Materials Research 103 (2012) Nr. 9, S. 1113-1116

A. Bhaskar, N.N. Bramnik, D.M. Trots, H. Fuess, H. Ehrenberg: In situ synchrotron diffraction study of chargeedischarge mechanism of solegel synthesized LiM0.5Mn1.5O4 (M Fe, Co), Journal of Power Sources 217 (2012), S. 464-469 URL

B. Boehme, Y. Liang, F. Thoss, L. Giebeler, H. Ehrenberg, M. Baitinger, J. Eckert, Y. Grin: Lithium in intermetallic clathrates, Zeitschrift fuer anorganische und allgemeine Chemie 638 (2012) Nr. 10, S. 1639 URL

M. Calin, M. Stoica, N. Zheng, X. Wang, S. Scudino, A. Gebert, J. Eckert: Thermal stability and crystallization kinetics of Ti40Zr10Cu34Pd14Sn2 bulk metallic glass, Solid State Phenomena 188 (2012), S. 3-10

I. Cernickova, L. Roscak, F. Ali, M. Kusy, S. Scudino, R. Cicka, M. Drienovsky, P. Priputen, J. Janovec: Influence of technological parameters on evolution of phases in Al-CMA composites prepared by powder metallurgy, Kovove Materialy (Metallic Materials) 50 (2012) Nr. 5, S. 327-334

A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra, J. Eckert: Effect of particle dispersion on the mechanical behavior of Al-based metal matrix composites reinforced with nanocrystalline AlCa intermetallics, Journal of Alloys and Compounds 536 (2012) Nr. Suppl. 1, S. S134-S137 URL

A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert: Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing, Materials Letters 79 (2012), S. 145-147 URL

A. Chrissanthopoulos, P. Jovari, I. Kaban, S. Gruner, T. Kavetskyy, J. Borc, W. Wang, J. Ren, G. Chen, S.N. Yannopoulos: Structure of AgI-dopedGe-In-S glasses: Experiment, reverse Monte Carlo modelling, and density functional calculations, Journal of Solid State Chemistry 192 (2012), S. 7-15 URL

F. de Clippel, M. Dusselier, R. Van Rompaey, P. Vanelderen, J. Dijkmans, E. Makshina, L. Giebeler, S. Oswald, G.V. Baron, J.F.M. Denayer, P.P. Pescarmona, P.A. Jacobs, B.F. Sels: Fast and selective sugar conversion to alkyl lactate and lactic acid with bifunctional carbon-silica catalysts, Journal of the American Chemical Society 134 (2012) Nr. 24, S. 10089-10101 URL

D.J. Collins, O. Manor, A. Winkler, H. Schmidt, J.R. Friend, L.Y. Yeo: Atomization off thin water films generated by high-frequency substrate wave vibrations, Physical Review E 86 (2012), S. 56312/1-9 URL

L. Dimesso, C. Foerster, W. Jaegermann, J.P. Khanderi, H. Tempel, A. Popp, J. Engstler, J.J. Schneider, A. Sarapulova, D. Mikhailova, L.A. Schmitt, S. Oswald, H. Ehrenberg: Developments in nanostructured LiMPO4 (M = Fe, Co, Ni, Mn) composites based on three dimensional carbon architecture, Chemical Society Reviews 41 (2012), S. 5068-5080 URL

P. Dunne, M. Uhlemann, A. Gebert, L. Schultz: Dilute magnetic semiconductors: Ab initio studies of V doped ZnO, ECS Transactions 45 (2012) Nr. 7, S. 97-108

V. Efimova, V. Hoffmann, J. Eckert: Sputter crater formation in the case of microsecond pulsed glow discharge in Grimm-type source. Comparison of direct current and radio frequency modes, Spectrochimica Acta B 76 (2012), S. 181-189 URL

G. Gamez, M. Voronov, S.J. Ray, V. Hoffmann, G.M. Hieftje, J. Michler: Surface elemental mapping via glow discharge optical emission spectroscopy, Spectrochimica Acta B 70 (2012), S. 1-9 URL

A. Gebert, P.F. Gostin, M. Uhlemann, J. Eckert, L. Schultz: Interactions between mechanically generated defects and corrosion phenomena of Zr-based bulk metallic glasses, Acta Materialia 60 (2012), S. 2300-2309 URL

R. Glaum, K. Gerber, M. Schulz-Dobrick, M. Herklotz, F. Scheiba, H. Ehrenberg: Synthesis, structures and properties of the new lithium cobalt(II) phosphate Li4Co(PO4)2, Journal of Solid State Chemistry 188 (2012), S. 26-31 URL

P.F. Gostin, S. Oswald, L. Schultz, A. Gebert: Acid corrosion process of Fe-based bulk metallic glass, Corrosion Science 62 (2012), S. 112-121 URL

J.H. Han, N. Mattern, B. Schwarz, S. Gorantla, T. Gemming, J. Eckert: Microstructure and magnetic properties of GdeHfeCoeAl phase separated metallic glasses, Intermetallics 20 (2012), S. 115-122 URL

J.H. Han, N. Mattern, B. Schwarz, D.H. Kim, J. Eckert: Phase separation and magneticproperties in Gd(Hf,Ti,Y)CoAl metallic glasses, Scripta Materialia 67 (2012), S. 149-152 URL

A.M. Hashem, H.M. Abuzeid, D. Mikhailova, H. Ehrenberg, A. Mauger, C.M. Julien: Structural and electrochemical properties of alpha-MnO2 doped with cobalt, Journal of Materials Science 47 (2012) Nr. 5, S. 2479-2485 URL

H. Hermann, V. Kokotin, J. Eckert: Locally fluctuating cooling rate as possible reason for non-crystalline plasticity in metallic glasses, Europhysics Letters (epl) 98 (2012) Nr. 1, S. 16003/1-6 URL

T. Hoeche, C. Patzig, T. Gemming, R. Wurth, C. Ruessel, I. Avramov: Temporal evolution of diffusion barriers surrounding ZrTiO4 nuclei in Lithia Aluminosilicate glass-ceramics, Crystal Growth Design 12 (2012), S. 1556-1563 URL

C. Hoffmann, T. Biemelt, A. Seifert, K. Pinkert, T. Gemming, S. Spange, S. Kaskel: Polymer-derived nanoporous silicon carbide with monodisperse spherical pores, Journal of Materials Chemistry 22 (2012), S. 24841/1-7 URL

D. Holland-Moritz, F. Yang, T. Kordel, S. Klein, F. Kargl, J. Gegner, T. Hansen, J. Bednarcik, I. Kaban, O. Shuleshova, N. Mattern, A. Meyer: Does an icosahedral short-range order prevail in glass-forming Zr-Cu melts?, Europhysics Letters (epl) 100 (2012) Nr. 5, S. 56002/1-6 URL

J. Hufenbach, S. Kohlar, U. Kuehn, L. Giebeler, J. Eckert: Microstructural and mechanical characterization of an ultra-high-strength Fe86.7Cr4.4Mo0.6V1.1W2.5C4.7 alloy, Journal of Materials Science 47 (2012) Nr. 1, S. 267-271 URL

J. Hufenbach, L. Giebeler, M. Hoffmann, S. Kohlar, U. Kuehn, T. Gemming, S. Oswald, B. Eigenmann, J. Eckert: Effect of short-term tempering on microstructure and mechanical properties of high-strength FeCrMoVC, Acta Materialia 60 (2012), S. 4468-4476 URL

A. Hynowska, E. Pellicer, J. Fornell, S. Gonzalez, N. van Steenberge, S. Surinach, A. Gebert, M. Calin, J. Eckert, M. Dolors Baro, J. Sort: Nanostructured beta-phase Ti31.0Fe9.0Sn and sub-my-structured Ti39.3Nb13.3Zr10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances, Materials Science and Engineering C 32 (2012), S. 2418-2425 URL

F.A. Javid, N. Mattern, S. Pauly, J. Eckert: Effect of cobalt on phase formation, microstructure, and mechanical properties of Cu50xCoxZr50 (x = 2, 5, 10, 20 at. pct) alloys, Metallurgical and Materials Transactions A 43 A (2012), S. 2631-2636 URL

A.M.Jr. Jorge, C. Bolfarini, C.S. Kiminami, J. Eckert, W.J. Botta: RQ 14 - "Rapidly quenched and metastable materials", International Journal of Materials Research 103 (2012) Nr. 9, S. 1

I. Kaban, P. Jovari, R.-P. Wang, B. Luther-Davies, N. Mattern, J. Eckert: Structural investigations of Ge5AsxSe95..x and Ge15AsxSe85.. x glasses using x-ray diffraction and extended x-ray fine structure spectroscopy, Journal of Physics: Condensed Matter 24 (2012), S. 385802/1-10 URL

I. Kaban, M. Koehler, L. Ratke, R. Nowak, N. Sobczak, N. Mattern, J. Eckert, A.L. Greer, S.W. Sohn, D.H. Kim: Phase separation in monotectic alloys as a route for liquid state fabrication of composite materials, Journal of Materials Science 47 (2012) Nr. 24, S. 8360-8366 URL

I. Kaban, R. Nowak, O. Shuleshova, B. Korpala, G. Bruzda, A. Siewiorek, J.H. Han, N. Sobczak, N. Mattern, J. Eckert: Sessile drop study of Gd-Ti monotectic alloys on ceramic substrates: phase transformations, wetting, and reactivity, Journal of Materials Science 47 (2012) Nr. 24, S. 8381-8386 URL

T.E. Kim, J.M. Park, U. Kuehn, J. Eckert, W.T. Kim, D.H. Kim: In situ martensitic phase reinforced Fe-Nb-Ni-Mn ultrafine composite with enhanced mechanical properties, Materials Science and Engineering A 531 (2012), S. 51-54 URL

J.Y. Kim, S. Scudino, U. Kuehn, B.S. Kim, M.H. Lee, J. Eckert: Production and characterization of brass-matrix composites reinforced with Ni59Zr20Ti16Si2Sn3 glassy particles, metals 2 (2012), S. 79-94 URL

V. Kokotin, H. Hermann, J. Eckert: Theoretical approach to local and effective properties of BMG based matrix-inclusion nanocomposites, Intermetallics 30 (2012), S. 40-47 URL

A. Kolchinskaya, P. Komissinskiy, M. Baghaie Yazdi, M. Vafaee, D. Mikhailova, N. Narayanan, H. Ehrenberg, F. Wilhelm, A. Rogalev, L. Alff: Magnetism and spin-orbit coupling in Ir-based double perovskites La2-xSrxCoIrO6, Physical Review B 85 (2012) Nr. 22, S. 224422/1-6 URL

U. Kuehn, J. Hufenbach, H. Wendrock, J. Eckert, W. Hufenbach, K. Kunze: Extrem hohe Energieabsorption durch TRIP-Effekt, Konstruktion (2012) Nr. 9, S. 10-11 URL

J. Kundin, R. Kumar, A. Schlieter, M.A. Choudhary, T. Gemming, B. Kuehn, J. Eckert, H. Emmerich: Phase-field modeling of eutectic Ti-Fe alloy solidification, Computational Materials Science 63 (2012), S. 319-328 URL

K. Lasri, I. Saadoune, Y. Bentaleb, D. Mikhailova, H. Ehrenberg, L. Haeggstroem, K. Edstroem: Origin of the irreversible capacity of the Fe0.5TiOPO4 anode material, Solid State Ionics 224 (2012), S. 15-20 URL

M. H. Lee, J. Das, D. J. Sordelet, J. Eckert, A. J. Hurd: Effect of tungsten metal particle sizes on the solubility of molten alloy melt: experimental observation of Gibbs-Thomson effect in anocomposites, Applied Physics Letters 101 (2012), S. 124103/1-5 URL

M.H. Lee, J.Y. Kim, U. Kuehn, J. Eckert: Influence of viscous flow on the deformation behavior of bulk metallic glassy alloys in supercooled liquid region, Intermetallics 30 (2012), S. 72-75 URL

K.R. Lim, W.T. Kim, E.-S. Lee, S.S. Jee, S.Y. Kim, D.H. Kim, A. Gebert, J. Eckert: Oxidation resistance of the supercooled liquid in Cu50Zr50 and Cu46Zr46Al8 metallic glasses, Journal of Materials Research 27 (2012) Nr. 8, S. 1178-1186 URL

Z. Liu, R. Li, G. Liu, K. Song, S. Pauly, T. Zhang, J. Eckert: Pronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment, AIP Advances 2 (2012), S. 3121/1-8 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Irreversible and reversible magnetic entropy change in a Dy-based bulk metallic glass, Intermetallics 30 (2012), S. 76-79 URL

Q. Luo, B. Schwarz, N. Mattern, J. Shen, J. Eckert: Mechanism of the giant irreversible positive magnetic entropy change in a Tb-based bulk metallic glass, Applied Physics Letters 101 (2012) Nr. 6, S. 62411/1-6 URL

N. Mattern, A. Shariq, B. Schwarz, U. Vainio, J. Eckert: Structural and magnetic nanoclusters in Cu50Zr50xGdx (x = 5 at.%) metallic glasses, Acta Materialia 60 (2012), S. 1946-1956 URL

N. Mattern, J.H. Han, M. Zinkevich, O. Shuleshova, I. Kaban, D. Holland-Moritz, J. Gegner, F. Yang, J. Bednarcik, W. Loeser, J. Eckert: Experimental and thermodynamic assessment of the Gd-Zr system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 39 (2012), S. 27-32 URL

N. Mattern, M. Stoica, G. Vaughan, J. Eckert: Thermal behaviour of Pd40Cu30Ni10P20 bulk metallic glass, Acta Materialia 60 (2012) Nr. 2, S. 517-524 URL

A. Maziewski, P. Mazalski, Z. Kurant, M.O. Liedke, J. McCord, J. Fassbender, J. Ferre, A. Mougin, A. Wawro, L.T. Baczewski, A. Rogalev, F. Wilhelm, T. Gemming: Tailoring of magnetism in Pt/Co/Pt ultrathin films by ion irradiation, Physical Review B 85 (2012) Nr. 5, S. 54427/1-6 URL

D. Mikhailova, B. Schwarz, A. Senyshyn, A.M.T. Bell, Y. Skourski, H. Ehrenberg, A.A. Tsirlin, S. Agrestini, M. Rotter, P. Reichel, J.M. Chen, Z. Hu, Z.M. Li, Z.F. Li, L.H. Tjeng: Magnetic properties and crystal structure of Sr3CoIrO6 and Sr3NiIrO6, Physical Review B 86 (2012) Nr. 13, S. 134409/1-13 URL

G. Mutschke, K. Tschulik, U. Uhlemann, A. Bund, J. Froehlich: Comment on Magnetic structuring of electrodeposits, Physical Review Letters 109 (2012), S. 229401/1 URL

S. Oswald, F. Oswald: Improved ARXPS data interpretation using near-surface measuring angles, Surface and Interface Analysis 44 (2012) Nr. 8, S. 1124-1129

J.M. Park, D.H. Kim, J. Eckert: Enhanced plasticity of Fe-Nb-B- (Ni, Cu) bulk metallic glasses by controlling the heterogeneity and elastic constants, Journal of Alloys and Compounds 536 (2012) Nr. Supl. 1, S. S70-S73 URL

J.M. Park, J.H. Han, N. Mattern, D.H. Kim, J. Eckert: Designing Zr-Cu-Co-Al bulk metallic glasses with phase separation mediated plasticity, Metallurgical and Materials Transactions A 43A (2012), S. 2598-2603 URL

J.M. Park, T.E. Kim, S.J. Kim, W.T. Kim, U. Kuehn, J. Eckert, D.H. Kim: Improving the mechanical properties of Fe-Nb-(Ni-Mn) dendrite-ultrafine eutectic composites via controlling the primary phase Features, Metallurgical and Materials Transactions A 43 A (2012), S. 2680-2686 URL

J.M. Park, D.H. Kim, J. Eckert: Internal state modulation-mediated plasticity enhancement in monolithic Ti-based bulk metallic glass, Intermetallics 29 (2012), S. 70-74 URL

V. Pavlyuk, I. Chumak, H. Ehrenberg: Polymorphism of Li2Zn3, Acta Crystallographica B 68 (2012), S. 34-39 URL

K.G. Prashanth, S. Scudino, M. Samadi Khoshkhoo, K.B. Surreddi, M. Stoica, G. Vaughan, J. Eckert: Structural and mechanical characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 bulk metallic glass, Materials 5 (2012) Nr. 1, S. 1-11 URL

R.T. Qu, J.X. Zhao, M. Stoica, J. Eckert, Z.F. Zhang: Macroscopic tensile plasticity of bulk metallic glass through designed artificial defects, Materials Science and Engineering A 534 (2012), S. 365-373 URL

R.T. Qu, M. Calin, J. Eckert, Z.F. Zhang: Metallic glasses: Notch-insensitive materials, Scripta Materialia 66 (2012), S. 733-736 URL

T. Riedl, T. Gemming, C. Mickel, K. Eymann, A. Kirchner, B. Kieback: Preparation of high-quality ultrathin transmission electron microscopy specimens of a nanocrystalline metallic powder, Microscopy Research and Technique 75 (2012) Nr. 6, S. 711-719

K. Sakaushi, G. Nickerl, F. M. Wisser, D. Nishio-Hamane, E. Hosono, H. Zhou, S. Kaskel, J. Eckert: An energy storage principle using bipolar porous polymeric frameworks, Angewandte Chemie/ International Edition 51 (2012) Nr. 31, S. 7850-7854 URL

K. Sakaushi, G. Nickerl, F.M. Wisser, D. Nishio-Hamane, E. Hosono, H. Zhou, S. Kaskel, J. Eckert: Ein Energiespeicherprinzip auf Basis bipolarer poroeser Polymernetzwerke, Angewandte Chemie - German Edition 124 (2012) Nr. 31, S. 7972-7976

A. Sarapulova, D. Mikhailova, L.A. Schmitt, S. Oswald, N. Bramnik, H. Ehrenberg: Disordered carbon nanofibers/LiCoPO4 composites as cathode materials for lithium ion batteries, Journal of Sol-Gel Science and Technology 62 (2012) Nr. 1, S. 98-110

B. Schwarz, N. Mattern, Q. Luo, J. Eckert: Magnetic properties and magnetocaloric effect of rapidly quenched GdCoFeAl alloys, Journal of Magnetism and Magnetic Materials 324 (2012) Nr. 8, S. 1581-1587 URL

A. Seifoddini, M. Nili-Ahmadabadi, S. Heshmati-Manesh, M. Stoica, U. Kuehn, J. Eckert: The effect of microstructural changes induced by annealing on mechanical properties of FeCoCrMoCBY bulk glassy alloy, Advanced Materials Research 488-489 (2012), S. 861-865

V. Sklyarchuk, Y. Plevachuk, R. Novakovic, I. Kaban: Surface properties and wetting characteristics of liquid Ag-Bi-Sn alloys, Monatshefte fuer Chemie - Chemical Monthly 143 (2012) Nr. 9, S. 1249-1254

V. Sklyarchuk, Y. Plevachuk, I. Kaban, R. Novakovic: Surface properties and wetting behaviour of liquid Ag-Sb-Sn alloys, Journal of Mining and Metallurgy/ B 48 (2012) Nr. 3, S. 443-448 URL

K. K. Song, P. Gargarella, S. Pauly, G.Z. Ma, U. Kuehn, J. Eckert: Correlation between glass-forming ability, thermal stability, and crystallization kinetics of Cu-Zr-Ag metallic glasses, Journal of Applied Physics 112 (2012), S. 63503/1-11 URL

K.K. Song, S. Pauly, Y. Zhang, R. Li, S. Gorantla, N. Narayanan, U. Kuehn, T. Gemming, J. Eckert: Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites, Acta Materialia 60 (2012) Nr. 17, S. 6000-6012 URL

K.K. Song, S. Pauly, B.A. Suna, Y. Zhang, J. Tan, U. Kuehn, M. Stoica, J. Eckert: Formation of Cu-Zr-Al-Er bulk metallic glass composites with enhanced deformability, Intermetallics 30 (2012), S. 132-138 URL

E.-D. Stoica, M. Nicolae, A. Gebert: Electrodeposited Calcium Phosphate coatings on TI6AL4V and TI6AL7NB anodized surfaces with intermediate nanotubes layer, Metalurgia International 17 (2012) Nr. 10, S. 13-17

R. Sueptitz, K. Tschulik, C. Becker, M. Stoica, M. Uhlemann, J. Eckert, A. Gebert: Micropatterning of Fe-based bulk metallic glass surfaces by pulsed electrochemical micromachining, Journal of Materials Research 27 (2012) Nr. 23, S. 3033-3040 URL

B.A. Sun, J. Tan, S. Pauly, U. Kuehn, J. Eckert: Stable fracture of a malleable Zr-based bulk metallic glass, Journal of Applied Physics 112 (2012) Nr. 10, S. 103533/1-6 URL

B.A. Sun, S. Pauly, J. Tan, M. Stoica, W.H. Wang, U. Kuehn, J. Eckert: Serrated flow and stickslip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass, Acta Materialia 60 (2012), S. 4160-4171 URL

A.H. Taghvaei, M. Stoica, M.S. Khoshkhoo, J. Thomas, G. Vaughan, K. Janghorban, J. Eckert: Microstructure and magnetic properties of amorphous/nanocrystalline Co40Fe22Ta8B30 alloy produced by mechanical alloying, Materials Chemistry and Physics 134 (2012), S. 1214-1224 URL

A.H. Taghvaei, M. Stoica, G. Vaughan, M. Ghaffari, S. Maleksaeedi, K. Janghorban: Microstructural characterization and amorphous phase formation in Co40Fe22Ta8B30 powders produced by mechanical alloying, Journal of Alloys and Compounds 512 (2012) Nr. 1, S. 85-93 URL

J. Tan, F.S. Pan, Y. Zhang, Z. Wang, M. Stoica, B.A. Sun, U. Kuehn, J. Eckert: Effect of Fe addition on glass forming ability and mechanical properties in ZrCoAl(Fe) bulk metallic glasses, Materials Science and Engineering A 539 (2012), S. 124-127 URL

J. Tan, F.S. Pan, Y. Zhang, B.A. Sun, J. He, N. Zheng, M. Stoica, U. Kuehn, J. Eckert: Formation of Zr-Co-Al bulk metallic glasses with high strength and large plasticity, Intermetallics 31 (2012), S. 282-286 URL

J. Thomas, J. Ramm, T. Gemming: Elektronenbeugung zur Analyse duenner Funktionsschichten: Standardmethode im Transmissionselektronenmikroskop, Vakuum in Forschung und Praxis 24 (2012) Nr. 6, S. 30-33 URL

K. Tschulik, C. Cierpka, M. Uhlemann, A. Gebert, L. Schultz: Electrodeposition of separated metallic structures in superimposed magnetic gradient fields, ECS Transactions 41 (2012) Nr. 26, S. 9-16 URL

K. Tschulik, C. Cierpka, X. Yang, M. Uhlemann, K. Eckert, R. Sueptitz, C.J. Kaehler, L. Schultz, A. Gebert: In-situ analysis of the ion concentration distribution and the electrolyte convection evolving during electrodeposition in magnetic gradient fields, Magnetohydrodynamics 48 (2012) Nr. 2, S. 279-288

A. Tuchscherer, C. Georgi, N. Roth, D. Schaarschmidt, T. Rueffer, T. Waechtler, S.E. Schulz, S. Oswald, T. Gessner, H. Lang: Ruthenocenes and half-open ruthenocenes: Synthesis, characterization, and their use as CVD precursors for Ruthenium thin film Deposition, European Journal of Inorganic Chemistry (2012) Nr. 30, S. 4867-4876

M. Voronov, V. Hoffmann, W. Buscher, C. Engelhard, S.J. Ray, G.M. Hieftje: Thermal mechanism for formation of electrical prepeak and pressure waves in a microsecond direct current pulsed glow discharge with a Grimm-type source: A modeling investigation, Journal of Analytical Atomic Spectrometry 27 (2012), S. 1225-1233 URL

M. Voronov, V. Hoffmann, T. Wallendorf, S. Marke, I. Moench, C. Engelhard, W. Buscher, S.J. Rayd, G.M. Hieftje: Glow discharge imaging spectroscopy with a novel acousto-optical imaging spectrometer, Journal of Analytical Atomic Spectrometry 27 (2012), S. 419-425 URL

G. Wang, N. Mattern, J. Bednarcik, R. Li, B. Zhang, J. Eckert: Correlation between elastic structural behavior and yield strength of metallic glasses, Acta Materialia 60 (2012) Nr. 6-7, S. 3074-3083 URL

A. Waske, H. Hermann, N. Mattern, K. Skokov, O. Gutfleisch, J. Eckert: Magnetocaloric effect of an Fe-based metallic glass compared to benchmark gadolinium, Journal of Applied Physics 112 (2012) Nr. 12, S. 123918/1-7 URL

A. Waske, M. Heiland, S. Odenbach: Local position of colloid clusters in a packed bed of spheres, Chemical Engineering Science 76 (2012), S. 192-198 URL

H. Wojcik, M. Junige, W. Bartha, M. Albert, V. Neumann, U. Merkel, A. Peeva, J. Gluch, S. Menzel, F. Munnik, R. Liske, D. Utess, I. Richter, C. Klein, H.J. Engelmann, P. Ho, C. Hossbach, C. Wenzel: Physical characterization of PECVD and PEALD Ru(-C) films and comparison with PVD Ruthenium film properties, Journal of the Electrochemical Society 159 (2012) Nr. 2, S. H166-H176 URL

W. Xu, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: On the formation of an ultrafine-duplex structure facilitated by severe shear deformation in a Ti-20Mo beta-type titanium alloy, Acta Materialia 60 (2012) Nr. 13-14, S. 5067-5078 URL

X. Yang, K. Tschulik, M. Uhlemann, S. Odenbach, K. Eckert: Enrichment of paramagnetic ions from homogeneous solutions in inhomogeneous magnetic fields, The Journal of Physical Chemistry Letters 3 (2012), S. 3559-3564 URL

A.R. Yavari, K. Georgarakis, J. Antonowicz, M. Stoica, N. Nishiyama, G. Vaughan, M. Chen, M. Pons: Crystallization during bending of a Pd-based metallic glass detected by X-Ray microscopy, Physical Review Letters 109 (2012) Nr. 8, S. 85501/1-4 URL

J. Zaehr, S. Oswald, M. Tuerpe, H.J. Ullrich, U. Fuessel: Characterisation of oxide and hydroxide layers on technical aluminum materials using XPS, Vacuum 86 (2012) Nr. 9, S. 1216-1219 URL

Y. Zhang, N. Mattern, J. Eckert: Understanding the relationship between atomic structures and transport properties in (Cu0.5Zr0.5)100.xAlx (<10) glass forming liquids: Molecular dynamics simulations, Journal of Alloys and Compounds 514 (2012), S. 141-149 URL

Y. Zhang, N. Mattern, J. Eckert: Study of structural anisotropy in Cu50Zr45Al5 metallic glass under uniaxial compression by molecular dynamics simulations, Intermetallics 30 (2012), S. 154-157 URL

Y. Zhang, N. Mattern, T.X. Liang, Q. Huang, J. Eckert: Atomic packing and short to medium range order in a U-Fe metallic glass, Applied Physics Letters 101 (2012) Nr. 2, S. 21909/1-4 URL

N. Zheng, R.T. Qu, S. Pauly, M. Calin, T. Gemming, Z.F. Zhang, J. Eckert: Design of ductile bulk metallic glasses by adding soft atoms, Applied Physics Letters 100 (2012) Nr. 14, S. 141901/1-4 URL

L.-F. Zhu, M. Friak, A. Dick, B. Grabowski, T. Hickel, F. Liot, D. Hole, A. Schlieter, U. Kuehn, J. Eckert, Z. Ebrahimi, H. Emmerich, J. Neugebauer: First-principles study of the thermodynamic and elastic properties of eutectic FeTi alloys, Acta Materialia 60 (2012), S. 1594-1602 URL

2011

D. Abou-Ras, R. Caballero, C.-H. Fischer, C.A. Kaufmann, I. Lauermann, R. Mainz, H. Moenig, A. Schoepke, C. Stephan, C. Streeck, S. Schorr, A. Eicke, M. Doebeli, B. Gade, J. Hinrichs, T. Nunney, H. Dijkstra, V. Hoffmann, D. Klemm, V. Efimova, A. Bergmaier, G. Dollinger, T. Wirth, W. Unger, A.A. Rockett, A. Perez-Rodriguez, J. Alvarez-Garcia, V. Izquierdo-Roca, T. Schmid, P.-P. Choi, M. Mueller, F. Bertram, J. Christen, H. Khatri, R.W. Collins, S. Marsillac, I. Koetschau: Comprehensive comparison of various techniques for the analysis of elemental distributions in thin films, Microscopy and Microanalysis 17 (2011), S. 728-751

H.M. Abuzeid, A.M. Hashem, N. Narayanan, H. Ehrenberg, C.M. Julien: Nanosized silver-coated and doped manganese dioxide for rechargeable lithium batteries, Solid State Ionics 182 (2011) Nr. 3, S. 108-115 URL

G.A. Almyras, D.G. Papageorgiou, C.E. Lekka, N. Mattern, J. Eckert, G.A. Evangelakis: Atomic cluster arrangements in Reverse Monte Carlo and molecular dynamics structural models of binary CueZr metallic glasses, Intermetallics 19 (2011) Nr. 5, S. 657-661 URL

A.A. Antonysamy, S. Pauly, B.K. Dhindaw, J. Eckert: Influence of superheat on microstructure and mechanical properties of ductile Cu47.5Zr47.5Al5 bulk metallic glass-matrix composite, Journal of Materials Engineering and Performance 20 (2011) Nr. 7, S. 1196-1205

N. Barekar, P. Gargarella, K. Song, S. Pauly, U. Kuehn, J. Eckert: Effect of Al and Ag addition on phase formation, thermal stability, and mechanical properties of CuZr-based bulk metallic glasses, Journal of Materials Research 26 (2011) Nr. 14, S. 1702-1710 URL

A. Castellero, T.A. Baser, J. Das, P. Matteis, J. Eckert, L. Battezzati, M. Baricco: Role of crystalline precipitates on the mechanical properties of (Cu0.50Zr0.50)100-xAlx (x = 4, 5, 7) bulk metallic glasses, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S99-S104 URL

F. de Clippel, A. Harkiolakis, T. Vosch, X. Ked, L. Giebeler, S. Oswald, K. Houthoofd, J. Jammaer, G. Van Tendeloo, J.A. Martens, P.A. Jacobs, G.V. Baron, B.F. Sels, J.F.M. Denayer: Graphitic nanocrystals inside the pores of mesoporous silica: Synthesis, characterization and an adsorption study, Microporous and Mesoporous Materials 144 (2011), S. 120-133 URL

G.S. Dmytriv, V.V. Pavlyuk, H. Pauly, J. Eckert, H. Ehrenberg: New real ternary and pseudoternary phases in the Li-Au-Insystem, Journal of Solid State Chemistry 184 (2011) Nr. 5, S. 1328-1332 URL

S. Dorzhieva, I. Chumak, A. Sarapulova, D. Mikhailova, J. Bazarova, H. Ehrenberg: A tetragonal form of dysprosium orthomolybdate at room temperature, Acta Crystallographica C 67 (2011), S. i50-i52

V. Efimova, V. Hoffmann, J. Eckert: Electrical properties of the my-s pulsed glow discharge in a Grimm-type source: comparison of dc and rf modes, Journal of Analytical Atomic Spectrometry 26 (2011), S. 784-791 URL

R. Essehli, B. El Bali, S. Benmokhtar, K. Bouziane, B. Manoun, M.A. Abdalslam, H. Ehrenberg: Crystal structures and magnetic properties of iron (III)-based phosphates:Na4NiFe(PO4)3 and Na2Ni2Fe(PO4)3, Journal of Alloys and Compounds 509 (2011), S. 1163-1171 URL

J. Fiedler, V. Heera, R. Skrotzki, T. Herrmannsdoerfer, M. Voelskow, A. Muecklich, S. Oswald, B. Schmidt, W. Skorupa, G. Gobsch, J. Wosnitza, M. Helm: Superconducting films fabricated by high-fluence Ga implantation in Si, Physical Review B 83 (2011) Nr. 21, S. 214504/1-10 URL

M. Friak, T. Hickel, B. Grabowski, L. Lymperakis, A. Udyansky, A. Dick, D. Ma, F. Roters, L.-F. Zhu, A. Schlieter, U. Kuehn, Z. Ebrahimi, R.A. Lebensohn, D. Holec, J. Eckert, H. Emmerich, D. Raabe, J. Neugebauer: Methodological challenges in combining quantum-mechanical and continuum approaches for materials science applications, The European Physical Journal Plus 126 (2011), S. 101/1-23 URL

W. Gang, N. Mattern, J. Bednarci, L. Xia, Q. Zhai, Y. Dong, J. Eckert: Deformation induced structural evolution in bulk metallic glasses, Chinese Science Bulletin- Special Issue, Bulk Metallic Glasses 56 (2011), S. 3952-3959

P. Gargarella, M.F. de Oliveira, C.S. Kiminami, S. Pauly, U. Kuehn, C. Bolfarini, W.J. Botta, J. Eckert: Prediction of good glass formers in the Al-Ni-La and Al-Ni-Gd systems using topological instability and electronegativity, Journal of Applied Physics 109 (2011) Nr. 9, S. 93509/1-7 URL

P. Gargarella, M.F. de Oliveira, C.S. Kiminami, S. Pauly, U. Kuehn, C. Bolfarini, W.J. Botta, J. Eckert: Predicting glass-forming compositions in the AlLa and AlLaNi systems, Journal of Alloys and Compounds 509S (2011) Nr. Suppl. 1, S. S170-S174 URL

S.E. Gledhill, A. Zykov, T. Rissom, R. Caballero, C. A. Kaufmann, C.-H. Fischer, M. Lux-Steiner, V. Efimova, V. Hoffmann, S. Oswald: The role of the spray pyrolysed Al2O3 barrier layer in achieving high efficiency solar cells on flexible steel substrates, Applied Physics A 104 (2011), S. 407-413

J. Gluch, T. Roessler, S.B. Menzel, J. Eckert: Microstructure and stress in High-k Hf-Y-O thin films, Microelectronic Engineering 88 (2011), S. 561-563 URL

W. Gruner, J. Thomas, L. Giebeler, H. Ehrenberg, D. Wadewitz: Interactions of copper and iron in conversion reactions of nanosized oxides with large variations in iron-copper ratio, Journal of the Electrochemical Society 158 (2011) Nr. 12, S. A1383-A1392 URL

R.V. Gudavarthy, S. Gorantla, G. Mu, E.A. Kulp, T. Gemming, J. Eckert, J.A. Switzer: Epitaxial electrodeposition of Fe3O4 on single-crystal Ni(111), Chemistry of Materials 23 (2011), S. 2017-2019 URL

J.H. Han, N. Mattern, D.H. Kim, J. Eckert: Phase separation and microstructure evolution of rapidly quenched GdHfCoAl alloys, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S42-S45 URL

A.M. Hashem, H.M. Abuzeid, N. Narayanan, H. Ehrenberg, C.M. Julien: Synthesis, structure, magnetic, electrical and electrochemical properties of Al, Cu and Mg doped MnO2, Materials Chemistry and Physics 130 (2011), S. 33-38 URL

A.M. Hashem, A.M. Abuzeid, H.M. Abdel-Latif, H.M. Abbas, H. Ehrenberg, R.S. Farag, A. Mauger, C.M. Julien: Improvement of the electrochemical performance of nanosized a-MnO2 used as cathode material for Li-batteries by Sn-doping, Journal of Alloys and Compounds 509 (2011), S. 9669-9674 URL

J. He, H. Jiang, J. Zhao, N. Mattern, J. Eckert: AlNiYCo amorphous matrix composites induced by bismuth and lead additions, Metallurgical and Materials Transactions A 42 (2011) Nr. 13, S. 4100-4105 URL

M. Hinterstein, M. Hoelzel, H. Kungl, M.J. Hoffmann, H. Ehrenberg, H. Fuess: In situ neutron diffraction study of electric field induced structural transitions in lanthanum doped lead zirconate titanate, Zeitschrift fuer Kristallographie 226 (2011), S. 155-162

T. Hoeche, M. Maeder, S. Bhattacharyya, G.S. Henderson, T. Gemming, R. Wurth, C. Ruessel, I. Avramov: ZrTiO4 crystallisation in nanosized liquid-liquid phase-separation droplets in glass - a quantitative XANES study, CrystEngComm 13 (2011), S. 2550-2556 URL

V. Hoffmann, M. Steinert, J. Acker: Analysis of gaseous reaction products of wet chemical silicon etching by conventional direct current glow discharge optical emission spectrometry(DC-GD-OES), Journal of Analytical Atomic Spectrometry 26 (2011), S. 1990-1996 URL

A. Huczko, A. Dabrowska, M. Soszynski, N. Maryan, M. Bystrzejewski, P. Baranowski, H. Lange, T. Gemming, A. Bachmatiuk, M.H. Ruemmeli: Ultrafast self-catalytic growth of silicon carbide nanowires, Journal of Materials Research 26 (2011) Nr. 24, S. 3065-3071 URL

J. Hufenbach, U. Kuehn, L. Krueger, H. Wendrock, J. Eckert: Transformation-induced plasticity in rapidly solidified Fe88.9Cr4.3V2.2C4.6, Steel Research International 82 (2011) Nr. 1, S. 51-55

A. Jacquot, J. Thomas, J. Schumann, M. Jaegle, H. Boettner, T. Gemming, J. Schmidt, D. Ebling: (Bi,Sb)2Te3-PbTe chalcogenide alloys: Impact of the cooling rate and sintering parameters on the microstructures and thermoelectric performances, Journal of Materials Research 26 (2011) Nr. 15, S. 1773-1784 URL

P. Jakes, E. Erdem, A. Ozarowski, J. van Tol, R. Buckan, D. Mikhailova, H. Ehrenberg, R.-A. Eichel: Local coordination of Fe3+ in Li[Co0.98Fe0.02]O2 as cathode material for lithium ion batteriesmulti-frequency EPR and Monte-Carlo Newman-superposition model analysis, Physical Chemistry Chemical Physics 13 (2011) Nr. 21, S. 9344-9352 URL

F.A. Javid, N. Mattern, S. Pauly, J. Eckert: Martensitic transformation and thermal cycling effect in Cu-Co-Zr alloys, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S334-S337 URL

P. Jovari, I. Kaban: Local atomic order in tellurium-rich infrared optical glasses, Inside nmi 3 2 (2011), S. 16-17

I. Kaban, P. Jovari, T. Wagner, M. Bartos, M. Frumar, B. Beuneu, W. Hoyer, N. Mattern, J. Eckert: Structural study of AsS2-Ag glasses over a wide concentration range, Journal of Non-Crystalline Solids 357 (2011) Nr. 19-20, S. 3430-3434 URL

I. Kaban, M. Koehler, L. Ratke, W. Hoyer, N. Mattern, J. Eckert, A.L. Greer: Interfacial tension, wetting and nucleation in AlBi and AlPb monotectic alloys, Acta Materialia 59 (2011), S. 6880-6889 URL

S. Kalinichenka, L. Roentzsch, T. Riedl, T. Gemming, T. Weissgaerber, B. Kieback: Microstructure and hydrogen storage properties of melt-spun Mg-Cu-Ni-Y alloys, International Journal of Hydrogen Energy 36 (2011), S. 1592-1600 URL

A. Kanjilal, S. Gemming, L. Rebohle, A. Muecklich, T. Gemming, M. Voelskow, W. Skorupa, M. Helm: Microstructure analysis at the interface of Er decorated Ge nanocrystals in SiO 2, Physical Review B 83 (2011) Nr. 11, S. 113302/1-4 URL

T. Karan, S. Ram, M. Stoica, J. Eckert: Effect of copper additives on irreversible melting in [{(Fe0.5Co0.5)0.75B0.2Si0.05}96Nb4]100-xCux, x 3 alloys, International Journal of Nanoscience 10 (2011) Nr. 4, S. 1013-1017

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert: Grain and crystallite size evaluation of cryomilled pure copper, Journal of Alloys and Compounds 509 (2011) Nr. Supplement 1, S. S343-S347 URL

O. Khvostikova, H. Hermann, H. Wendrock, T. Gemming, J. Thomas, H. Ehrenberg: Effect of the microstructure on the intercalation and exfoliation behaviour of graphite, Journal of Materials Science 46 (2011) Nr. 8, S. 2422-2430

K.T. Kim, J. Eckert, G. Liu, J.M. Park, B.K. Lim, S.H. Hong: Influence of embedded-carbon nanotubes on the thermal properties of copper matrix nanocomposites processed by molecular-level mixing, Scripta Materialia 64 (2011) Nr. 2, S. 181-184 URL

S.Y. Kim, S.S. Jee, K.R. Lim, W.T. Kim, D.H. Kim, E.-S. Lee, Y.H. Kim, S.M. Lee, J.H. Lee, J. Eckert: Replacement of oxide glass with metallic glass for Ag screen printing metallization on Si emitter, Applied Physics Letters 98 (2011) Nr. 22, S. 222112/1-3 URL

K.T. Kim, G.H. Ha, J. Eckert: Microstructures and magnetic properties of carbon nanotube/Co-oxide nanocomposite powders, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S412-S415 URL

M. Koehler, L. Ratke, I. Kaban, W. Hoyer: Heterogeneous nucleation in hypermonotectic aluminum alloys, IOP Conference Series: Materials Science and Engineering 27 (2011) Nr. 1, S. 12005/1-7 URL

V. Kokotin, H. Hermann, J. Eckert: Computer simulation of the matrix-inclusion interphase in bulk metallic glass based nanocomposites, Journal of Physics/ Condensed Matter 23 (2011) Nr. 42, S. 425403/1-7 URL

U. Kuehn, J. Hufenbach: Eisenbasislegierungen genuegen hoechsten Anspruechen, Konstruktion (2011) Nr. 7/8, S. IW5

G. Liu, S. Scudino, R. Li, U. Kuehn, J. Sun, J. Eckert: Coupling effect of primary voids and secondary voids on the ductile fracture of heat-treatable aluminum alloys, Mechanics of Materials 43 (2011) Nr. 10, S. 556-566 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Magnetic ordering and slow dynamics in a Ho-based bulk metallic glass with moderate random magnetic anisotropy, Journal of Applied Physics 109 (2011) Nr. 11, S. 113904/1-3 URL

N. Mattern, U. Vainio, J.M. Park, J.H. Han, A. Shariq, D.H. Kim, J. Eckert: Phase separation in Cu46Zr47-xAl7Gdx metallic glasses, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S23-S26 URL

D. Mikhailova, N.N. Bramnik, K.G. Bramnik, P. Reichel, S. Oswald, A. Senyshyn, D.M. Trots, H. Ehrenberg: Layered LixMoO2 phases with different composition for electrochemical application: Structural considerations, Chemistry of Materials 23 (2011) Nr. 15, S. 3429-3441 URL

N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, T.P. Yadav, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert: Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling, Philosophical Magazine 91 (2011) Nr. 19-21, S. 2482-2490 URL

J. Nagel, K.B. Konovalenko, M. Kemmler, M. Turad, R. Werner, E. Kleisz, S. Menzel, R. Klingeler, B. Buechner, R. Kleiner, D. Koelle: Resistively shunted YBa2Cu3O7 grain boundary junctions and low-noise SQUIDs patterned by a focused ion beam down to 80 nm linewidth, Superconductor Science and Technology 24 (2011) Nr. 1, S. 15015/1-8 URL

T. Namsaraeva, B. Bazarov, D. Mikhailova, N. Kuratieva, A. Sarapulova, A. Senyshyn, H. Ehrenberg: Orthomolybdates in the CsFeII,IIIMoO System: Cs4Fe(MoO4)3, Cs2Fe2(MoO4)3 and CsFe5(MoO4)7, European Journal of Inorganic Chemistry (2011) Nr. 18, S. 2832-2841

S. Oswald, D. Mikhailova, F. Scheiba, P. Reichel, A. Fiedler, H. Ehrenberg: XPS investigations of electrolyte/electrode interactions for various Li-ion battery materials, Analytical and Bioanalytical Chemistry 400 (2011), S. 691-696

S. Oswald, F. Oswald: A promising concept for using near-surface measuring angles in angle-resolved x-ray photoelectron spectroscopy considering elastic scattering effects, Journal of Applied Physics 109 (2011), S. 34305/1-11 URL

J.M. Park, D.H. Kim, M. Stoica, N. Mattern, R. Li, J. Eckert: The influence of in situ formed precipitates on the plasticity of Fe-Nb-B-Cu bulk metallic glasses, Journal of Materials Research 26 (2011) Nr. 16, S. 2080-2086 URL

J.M. Park, G. Wang, S. Pauly, N. Mattern, D.H. Kim, J. Eckert: Ductile Ti-based bulk metallic glasses with high specific strength, Metallurgical and Materials Transactions A 42 (2011) Nr. 6, S. 1456-1460 URL

J.M. Park, D.H. Kim, K.B. Kim, N. Mattern, J. Eckert: Evolution of constitution, structure, and mechanical properties in FeTiZrB heterogeneous multiphase composites, Journal of Materials Research 26 (2011), S. 365-371

J.M. Park, D.H. Kim, N. Mattern, K.B. Kim, E. Fleury, J. Eckert: Microstructure and mechanical properties of FeSiTi(Cu, Al) heterostructured ultrafine composites, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S367-S370 URL

G. Parzych, D. Mikhailova, S. Oswald, J. Eckert, H. Ehrenberg: Study of the conversion reaction mechanism for copper borate as electrode material in lithium-ion batteries, Journal of the Electrochemical Society 158 (2011) Nr. 8, S. A898-A904 URL

A.I. Popa, E. Vavilova, C. Taeschner, V. Kataev, B. Buechner, R. Klingeler: Electrochemical behavior and magnetic properties of vanadium oxide nanotubes, The Journal of Physical Chemistry C 115 (2011) Nr. 13, S. 5265-5270 URL

K.G. Prashanth, S. Kumar, S. Scudino, B.S. Murty, J. Eckert: Fabrication and response of Al70Y16Ni10Co4 glass reinforced metal matrix composites, Materials and Manufacturing Processes 26 (2011) Nr. 10, S. 1242-1247 URL

R.T. Qu, J. Eckert, Z.F. Zhang: Tensile fracture criterion of metallic glass, Journal of Applied Physics 109 (2011) Nr. 8, S. 83544/1-12 URL

L. Ratkai, C. Conseil, V. Nazabal, B. Bureau, I. Kaban, J. Bednarcik, B. Beuneu, P. Jovari: Microscopic origin of demixing in Ge20SexTe80-x alloys, Journal of Alloys and Compounds 509 (2011) Nr. 17, S. 5190-5194 URL

L. Ratkai, A.P. Goncalves, G. Delaizir, C. Godart, I. Kaban, B. Beuneu, P. Jovari: The Cu and Te coordination environments in Cu-doped Ge-Te glasses, Solid State Communications 151 (2011) Nr. 21, S. 1524-1527 URL

J.L. Ren, C. Chen, G. Wang, N. Mattern, J. Eckert: Dynamics of serrated flow in a bulk metallic glass, AIP Advances 1 (2011) Nr. 3, S. 32158/1-6 URL

T. Rissom, R. Mainz, C.A. Kaufmann, R. Caballero, V. Efimova, V. Hoffmann, H.-W. Schock: Examination of growth kinetics of copper rich Cu(In,Ga)Se2-films using synchrotron energy dispersive X-ray diffractometry, Solar Energy Materials and Solar Cells 95 (2011) Nr. 1, S. 250-253 URL

V.V. Romaka, M. Konyk, L. Romaka, V. Pavlyuk, H. Ehrenberg, A. Tkachuk: Peculiarity of component interaction in {Y, Dy}-Mn-Sn ternary systems, Journal of Alloys and Compounds 509 (2011) Nr. 28, S. 7559-7564 URL

A. Schlieter, U. Kuehn, J. Eckert, W. Loeser, T. Gemming, M. Friak, J. Neugebauer: Anisotropic mechanical behavior of ultrafine eutectic TiFe cast under non-equilibrium conditions, Intermetallics 19 (2011), S. 327-335 URL

J.J. Schneider, J. Khanderi, A. Popp, J. Engstler, H. Tempel, A. Sarapulova, N.N. Bramnik, D. Mikhailova, H. Ehrenberg, L.A. Schmitt, L. Dimesso, C. Foerster, W. Jaegermann: Hybrid architectures from 3D aligned arrays of multiwall carbon nanotubes and nanoparticulate LiCoPO4: Synthesis, properties and evaluation of their electrochemical performance as cathode materials in lithium ion batteries, European Journal of Inorganic Chemistry (2011) Nr. 28, S. 4349-4359

B. Schwarz, U. Vainio, N. Mattern, S.W. Sohn, S. Oswald, D.H. Kim, J. Eckert: Combined in-situ SAXS/WAXS and HRTEM study on crystallization of (Cu60Co40)1-xZrx metallic glasses, Journal of Non-Crystalline Solids 357 (2011) Nr. 6, S. 1538-1546 URL

B. Schwarz, N. Mattern, J.D. Moore, K.P. Skokov, O. Gutfleisch, J. Eckert: Influence of sample geometry on determination of magnetocaloric effect for Gd60Co30Al10 glassy ribbons using direct and indirect methods, Journal of Magnetism and Magnetic Materials 323 (2011) Nr. 13, S. 1782-1786 URL

S. Scudino, B. Jerliu, S. Pauly, K.B. Surreddi, U. Kuehn, J. Eckert: Ductile bulk metallic glasses produced through designed heterogeneities, Scripta Materialia 65 (2011) Nr. 9, S. 815-818 URL

S. Scudino, B. Jerliu, K.B. Surreddi, U. Kuehn, J. Eckert: Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass, Journal of Alloys and Compounds 509 (2011) Nr. Supplement 1, S. S128-S130 URL

A. Senyshyn, M. Hoelzel, T. Hansen, L. Vasylechko, V. Mikhailik, H. Kraus, H. Ehrenberg: Thermal structural properties of calcium tungstate, Journal of Applied Crystallography 44 (2011), S. 319-326 URL

A. Shariq, N. Mattern: A study of phase separated Ni66Nb17Y17 metallic glass using atom probe tomography, Ultramicroscopy 111 (2011), S. 1370-1374 URL

A.P. Shpak, A.G. Ilinskii, A.V. Marunyak, O.I. Slukhovskyy, Y.V. Lepeeva, A. Dekhtyar, I. Kaban, N. Mattern, J. Eckert: Crystallization of Fe82Si2B16 and Fe82Si4B14 metallic glasses upon isothermal and non-isothermal annealing, EPJ Web of Conferences 15 (2011), S. 1008/1-4 URL

K.K. Song, S. Pauly, Y. Zhang, S. Scudino, P. Gargarella, K.B. Surreddi, U. Kuehn, J. Eckert: Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass, Intermetallics 19 (2011), S. 1394-1398 URL

K.K. Song, S. Pauly, Y. Zhang, P. Gargarella, R. Li, N.S. Barekar, U. Kuehn, M. Stoica, J. Eckert: Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys, Acta Materialia 59 (2011), S. 6620-6630 URL

M. Stoica, A. Bardos, S. Roth, L.K. Varga, L. Schultz, A. Lovas, J. Eckert: Improved synthesis of bulk metallic glasses by current-assisted copper mold casting, Advanced Engineering Materials 13 (2011) Nr. 1-2, S. 38-42 URL

M. Stoica, R. Li, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: [(Fe0.5Co0.5)0.75B0.20Si0.05]96Nb4 metallic glasses with small Cu additions, Metallurgical and Materials Transactions A 42 (2011) Nr. 6, S. 1476-1480 URL

M. Stoica, V. Kolesar, J. Bednarcic, S. Roth, H. Franz, J. Eckert: Thermal stability and magnetic properties of partially Co-substituted (Fe71.2B24Y4.8)96Nb4 bulk metallic glasses, Journal of Applied Physics 109 (2011) Nr. 5, S. 54901/1-6 URL

D. Stoyan, A. Wagner, H. Hermann, A. Elsner: Statistical characterization of the pore space of random systems of hard spheres, Journal of Non-Crystalline Solids 357 (2011) Nr. 6, S. 1508-1515 URL

S. Strehle, S. Menzel, K. Wetzig, J.W. Bartha: Microstructure of electroplated Cu(Ag) alloy thin films, Thin Solid Films 519 (2011) Nr. 11, S. 3522-3529 URL

H.J. Su, J. Zhang, L. Liu, J. Eckert, H.Z. Fu: Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming, Applied Physics Letters 99 (2011) Nr. 22, S. 221913/1-3 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, L. Schultz, A. Gebert: Magnetic field effects on the active dissolution of iron, Electrochimica Acta 56 (2011), S. 5866-5871 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, M. Katter, L. Schultz, A. Gebert: Effect of magnetization state on the corrosion behaviour of NdFeB permanent magnets, Corrosion Science 53 (2011), S. 2843-2852 URL

R. Sueptitz, K. Tschulik, M. Uhlemann, L. Schultz, A. Gebert: Effect of high gradient magnetic fields on the anodic behaviour and localized corrosion of iron in sulphuric acid solutions, Corrosion Science 53 (2011) Nr. 10, S. 3222-3230 URL

J. Tan, Y. Zhang, M. Stoica, U. Kuehn, N. Mattern, F.S. Pan, J. Eckert: Study of mechanical property and crystallization of a ZrCoAl bulk metallic glass, Intermetallics 19 (2011) Nr. 4, S. 567-571 URL

J. Tan, Y. Zhang, B.A. Sun, M. Stoica, C.J. Li, K.K., Kuehn, U. Song, F.S. Pan, J. Eckert: Correlation between internal states and plasticity in bulk metallic glass, Applied Physics Letters 98 (2011) Nr. 15, S. 151906/1-3 URL

J. Torrens-Serra, S. Venkataraman, M. Stoica, U. Kuehn, S. Roth, J. Eckert: Non-isothermal kinetic analysis of the crystallization of metallic glasses using the master curve method, Materials 4 (2011), S. 2231-2243 URL

M. Voronov, V. Hoffmann, W. Buscher, C. Engelhard, S.J. Ray, G.M. Hieftje: Pressure waves generated in a Grimm-type pulsed glow discharge source and their influence on discharge parameters, Journal of Analytical Atomic Spectrometry 505 (2011), S. 811-815 URL

T. Waechtler, S.-F. Ding, L. Hofmann, R. Mothes, Q. Xie, S. Oswald, C. Detavernier, S.E. Schulz, X.-P. Quc, H. Heinrich Lang, T. Gessner: ALD-grown seed layers for electrochemical copper deposition integrated with different diffusion barrier systems, Microelectronic Engineering 88 (2011), S. 684-689 URL

H. Wojcik, U. Merkel, A. Jahn, K. Richter, M. Junige, C. Klein, J. Gluch, M. Albert, F. Munnik, C. Wenzel, J.W. Bartha: Comparison of PVD, PECVD & PEALD Ru(-C) films as Cu diffusion barriers by means of bias temperature stress measurements, Microelectronic Engineering 88 (2011), S. 641-645 URL

L. Wondraczek, J.C. Mauro, J. Eckert, U. Kuehn, J. Horbach, J. Deubener, T. Rouxel: Towards ultrastrong glasses, Advanced Materials 23 (2011) Nr. 39, S. 4578-4586 URL

W. Xu, R.B. Figueiredo, X. Wu, S. Pauly, M. Stoica, J. Eckert, T.G. Langdon, K. Xia: Intrinsically ductile failure in a nanocrystalline beta titanium alloy, Advanced Engineering Materials 13 (2011) Nr. 12, S. 1108-1113

Y. Zhang, N. Mattern, J. Eckert: Atomic structure and transport properties of Cu50Zr45Al5 metallic liquids and glasses: Molecular dynamics simulations, Journal of Applied Physics 110 (2011) Nr. 9, S. 93506/1-8 URL

L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao, T.B. Sercombe: Manufacture by selective laser melting and mechanical behavior of a biomedical Ti24Nb4Zr8Sn alloy, Scripta Materialia 65 (2011) Nr. 1, S. 21-24 URL

Y. Zhang, N. Mattern, J. Eckert: Effect of uniaxial loading on the structural anisotropy and the dynamics of atoms of Cu50Zr50 metallic glasses within the elastic regime studied by molecular dynamics simulation, Acta Materialia 59 (2011), S. 4303-4313 URL

Y. Zhang, N. Mattern, J. Eckert: Molecular dynamic simulation study of the structural anisotropy in Cu50Zr50 and Cu64.5Zr35.5 metallic glasses induced by static uniaxial loading within the elastic regime, Journal of Alloys and Compounds 509 (2011) Nr. Suppl. 1, S. S74-S77 URL

2010

V.A. Alyoshin, I.P. Romanova, D. Mikhailova, S. Oswald, A. Senyshyn, H. Ehrenberg: Oxygen nonstoichiometry of tetragonal La2-xSrxCuO4-delta (x ) 0.15-1.2) and in situ XPS studies at elevated temperatures, Journal of Physical Chemistry A 114 (2010), S. 13362-13369 URL

N.S. Barekar, S. Pauly, R.B. Kumar, U. Kuehn, B.K. Dhindaw, J. Eckert: Structureproperty relations in bulk metallic CuZrAl alloys, Materials Science and Engineering A 527 (2010) Nr. 21-22, S. 5867-5872 URL

A. Bhaskar, N.N. Bramnik, A. Senyshyn, H. Fuess, H. Ehrenberg: Synthesis, characterization, and comparison of electrochemical properties of LiM0.5Mn1.5O4 (M = Fe, Co, Ni) at different temperatures, Journal of the Electrochemical Society 157 (2010) Nr. 6, S. A689-A695 URL

X. Bie, C. Wang, H. Ehrenberg, Y. Wei, G. Chen, X. Meng, G. Zou, F. Du: Room-temperature ferromagnetism in pure ZnO nanoflowers, Solid State Sciences 12 (2010) Nr. 8, S. 1364-1367 URL

F. Boerrnert, C. Boerrnert, S. Gorantla, X. Liu, A. Bachmatiuk, J.-O. Joswig, F.R. Wagner, F. Schaeffel, J.H. Warner, R. Schoenfelder, B. Rellinghaus, T. Gemming, J. Thomas, M. Knupfer, B. Buechner, M.H. Ruemmeli: Single-wall-carbon-nanotube/single-carbon-chain molecular junctions, Physical Review B 81 (2010) Nr. 8, S. 85439/1-5 URL

M. Calin, J. Das, K.B. Kim, S. Pauly, N. Mattern, J. Eckert: Enhanced work hardening of Cu-based bulk metallic glass composites by in-situ formed nano-scale heterogeneities, Materials Science Forum 633-634 (2010), S. 665-673

I. Chumak, V. Pavlyuk, G. Dmytriv, S. Oswald, J. Eckert, H. Trill, H. Eckert, H. Pauly, H. Ehrenberg: Li(Al1-zZnz) alloys as anode materials for rechargeable Li-ion batteries, Journal of Materials Research 25 (2010) Nr. 8, S. 1492-1499 URL

I. Chumak, K.W. Richter, H. Ehrenberg: Redetermination of iron dialuminide, FeAl2, Acta Crystallographica C 66 (2010), S. i87-i88

J.W. Cui, R.T. Qua, F.F. Wu, Z.F. Zhang, B.L. Shen, M. Stoica, J. Eckert: Shear band evolution during large plastic deformation of brittle and ductile metallic glasses, Philosophical Magazine Letters 90 (2010), S. 573-579

M.E. Arroyo y de Dompablo, N. Biskup, J.M. Gallardo-Amores, E. Moran, H. Ehrenberg, U. Amador: Gaining insights into the energetics of FePO4 polymorphs, Chemistry of Materials 22 (2010), S. 994-1001 URL

V. Efimova, A. Derzsi, A. Zlotorowicz, V. Hoffmann, Z. Donko, J. Eckert: Influence of the anode material on the characteristics of an analytical glow discharge cell, Spectrochimica Acta, Part B 65 (2010) Nr. 4, S. 311-315 URL

J. Gluch, T. Roessler, D. Schmidt, S.B. Menzel, M. Albert, J. Eckert: TEM characterization of ALD layers in deep trenches using a dedicated FIB lamellae preparation method, Thin Solid Films 518 (2010), S. 4553-4555 URL

G. Goerigk, N. Mattern: Spinodal decomposition in Ni-Nb-Y metallic glasses analyzed by quantitative anomalous small-angle X-ray scattering, Journal of Physics: Conference Series 247 (2010) Nr. 1, S. 12022/1-13 URL

S. Gorantla, F. Boerrnert, A. Bachmatiuk, M. Dimitrakopoulou, R. Schoenfelder, F. Schaeffel, J. Thomas, T. Gemming, E. Borowiak-Palen, J.H. Warner, B.I. Yakobson, J. Eckert, B. Buechner, M.H. Ruemmeli: In situ observations of fullerene fusion and ejection in carbon nanotubes, Nanoscale 2 (2010) Nr. 10, S. 2077-2079 URL

S. Gorantla, S. Avdoshenko, F. Boerrnert, A. Bachmatiuk, M. Dimitrakopoulou, F. Schaeffel, R. Schoenfelder, J. Thomas, T. Gemming, J.H. Warner, G. Cuniberti, J. Eckert, B. Buechner, M.H. Ruemmeli: Enhanced pi-pi interactions between a C60 fullerene and a buckle bend on a double-walled carbon nanotube, Nano Research 3 (2010) Nr. 2, S. 92-97 URL

A.M. Hashem, H.M. Abuzeid, K. Nikolowski, H. Ehrenberg: Table sugar as preparation and carbon coating reagent for facile synthesis and coating of rod-shaped MnO2, Journal of Alloys and Compounds 497 (2010) Nr. 1-2, S. 300-303 URL

A.H. Hashem, A.E. Abdel Ghany, K. Nikolowski, H. Ehrenberg: Effect of carbon coating process on the structure and electrochemical performance of LiNi0.5Mn0.5O2 used as cathode in Li-ion batteries, Ionics 16 (2010) Nr. 4, S. 305-310

H. Hermann: Effective dielectric and elastic properties of nanoporous low-k media, Modelling and Simulation in Materials Science and Engineering 18 (2010) Nr. 5, S. 55007/1-19 URL

P. Jovari, I. Kaban, B. Bureau, A. Wilhelm, P. Lucas, B. Beuneu, D.A. Zajac: Structure of Te-rich TeGeX (X = I, Se, Ga) glasses, Journal of Physics: Condensed Matter 22 (2010) Nr. 40, S. 404207/1-9 URL

I. Kaban, S. Curiotto, D. Chatain, W. Hoyer: Surfaces, interfaces and phase transitions in AlIn monotectic alloys, Acta Materialia 58 (2010), S. 3406-3414 URL

I. Kaban, P. Jovari, T. Petkova, P. Petkov, A. Stoilova, W. Hoyer, B. Beuneu: Structure of GeSe4In and GeSe5In glasses, Journal of Physics: Condensed Matter 22 (2010) Nr. 40, S. 404205/1-8 URL

I. Kaban, P. Jovari, M. Stoica, N. Mattern, J. Eckert, W. Hoyer, B. Beuneu: On the atomic structure of Zr60Cu20Fe20 metallic glass, Journal of Physics: Condensed Matter 22 (2010) Nr. 40, S. 404208/1-5 URL

O. Khvostikova, B. Assfour, G. Seifert, H. Hermann, A. Horst, H. Ehrenberg: Novel experimental methods for assessment of hydrogen storage capacity and modelling of sorption in Cu-BTC, International Journal of Hydrogen Energy 35 (2010) Nr. 20, S. 11042-11051 URL

T.E. Kim, J.M. Park, S.W. Sohn, D.H. Kim, W.T. Kim, M. Stoica, U. Kuehn, J. Eckert: Effect of carbon addition on the microstructural evolution and mechanical properties in hypo-eutectic Fe-Zr(-Nb) alloys, Materials Transactions 51 (2010) Nr. 4, S. 799-802

U. Kuehn, J. Romberg, N. Mattern, H. Wendrock, J. Eckert: Transformation-induced plasticity in Fe-Cr-V-C, Journal of Materials Research 25 (2010) Nr. 2, S. 368-374 URL

M.H. Lee, K.T. Kim, T. Gemming, D.J. Sordelet, J. Eckert: Enhanced gas adsorption property of hybrid nanopore-structured copper oxide synthesized from the carbon nanotube/copper composites, Journal of Applied Physics 108 (2010) Nr. 6, S. 64303/1-6 URL

M.H. Lee, J. Das, K.S. Lee, U. Kuehn, J. Eckert: Effect of prestraining on the deformation and fracture behavior of Zr44Ti11Cu9.8Ni10.2Be25, Intermetallics 18 (2010) Nr. 10, S. 1902-1907 URL

M.H. Lee, J.K. Lee, K.B. Kim, D.J. Sordelet, J. Eckert, J.C. Bae: Mechanical behavior of metallic glass reinforced nanostructured tungsten composites synthesized by spark plasma sintering, Intermetallics 18 (2010) Nr. 10, S. 2009-2013 URL

M.H. Lee, K.S. Lee, J. Das, J. Thomas, U. Kuehn, J. Eckert: Improved plasticity of bulk metallic glasses upon cold rolling, Scripta Materialia 62 (2010) Nr. 9, S. 678-681 URL

R. Li, G. Liu, M. Stoica, J. Eckert: FeCo-based multiphase composites with high strength and large plastic deformation, Intermetallics 18 (2010) Nr. 1, S. 134-139 URL

R. Li, S. Pang, M. Stoica, J.M. Park, U. Kuehn, T. Zhang, J. Eckert: Mechanical properties of rapidly solidified FeAlB ternary alloys, Journal of Alloys and Compounds 504 (2010) Nr. Suppl. 1, S. S472-S475 URL

R. Li, M. Stoica, G. Liu, J. Eckert: Evolution of constitution, structure and morphology in FeCo-based multicomponent alloys, Metallurgical and Materials Transactions A 41 (2010) Nr. 7, S. 1640-1645 URL

R. Li, M. Stoica, G. Wang, J.M. Park, Y. Li, T. Zhang, J. Eckert: Glass formation, thermal properties, and elastic constants of La-Al-Co alloys, Journal of Materials Research 25 (2010) Nr. 7, S. 1398-1404 URL

K.R. Lim, J.H. Na, J.M. Park, W.T. Kim, D.H. Kim: Enhancement of plasticity in Ti-based metallic glass matrix composites by controlling characteristic and volume fraction of primary phase, Journal of Materials Research 25 (2010) Nr. 11, S. 2183-2191 URL

Q. Luo, B. Schwarz, N. Mattern, J. Eckert: Giant irreversible positive to large reversible negative magnetic entropy change evolution in Tb-based bulk metallic glass, Physical Review B 82 (2010) Nr. 2, S. 24204/1-6 URL

N. Mattern, U. Vainio, B. Schwarz, J.M. Park, D.H. Kim, J. Eckert: Phase separation in Ni70Nb30-xYx glasses, Intermetallics 18 (2010), S. 1842-1845 URL

N. Mattern, T. Gemming, J. Thomas, G. Goerigk, H. Franz, J. Eckert: Phase separation in NiNbY metallic glasses, Journal of Alloys and Compounds 495 (2010) Nr. 2, S. 299-304 URL

T. Meissner, D. Kuehnel, W. Busch, S. Oswald, V. Richter, A. Michaelis, K. Schirmer, A. Potthoff: Physical-chemical characterization of tungsten carbide nanoparticles as a basis for toxicological investigations, Nanotoxicology 4 (2010) Nr. 2, S. 196-206

D. Mikhailova, N. Narayanan, A. Voss, H. Ehrenberg, D.M. Trots, C. Ritter, J. Eckert, H. Fuess: Solid solution Sr2Sc1+xRe1xO6 with a perovskite-like structure: Phase transitions and magnetic properties, European Journal of Inorganic Chemistry (2010) Nr. 8, S. 1196-1206

D. Mikhailova, A. Sarapulova, A. Voss, A. Thomas, S. Oswald, W. Gruner, D.M. Trots, N.N. Bramnik, H. Ehrenberg: Li3V(MoO4)3: A new material for both Li extraction and insertion, Chemistry of Materials 22 (2010), S. 3165-3173 URL

D. Mikhailova, N. Narayanan, W. Gruner, A. Voss, A. Senyshyn, D.M. Trots, H. Fuess, H. Ehrenberg: The role of oxygen stoichiometry on phase stability, structure, and magnetic properties of Sr2CoIrO6-delta, Inorganic Chemistry 49 (2010), S. 10348-10356 URL

M. Bakr Mohamed, A. Senyshyn, H. Ehrenberg, H. Fuess: Structural, magnetic, dielectric properties of multiferroic GaFeO3 prepared by solid state reaction and solgel methods, Journal of Alloys and Compounds 492 (2010), S. L20-L27 URL

N. Narayanan, D. Mikhailova, A. Senyshyn, D.M. Trots, R. Laskowski, P. Blaha, K. Schwarz, H. Fuess, H. Ehrenberg: Temperature and composition dependence of crystal structures and magnetic and electronic properties of the double perovskites, Physical Review B 82 (2010) Nr. 2, S. 24403/1-12 URL

R.M. Oliveira, J.A.N. Goncalves, M. Ueda, S. Oswald, S.C. Baldissera: Improved corrosion resistance of tool steel H13 by means of cadmium ion implantation and deposition, Surface and Coatings Technology 204 (2010), S. 2981-2985 URL

S. Oswald, K. Nikolowski, H. Ehrenberg: XPS investigations of valence changes during cycling of LiCrMnO4-based cathodes in Li-ion batteries, Surface and Interface Analysis 42 (2010), S. 916-921

S. Oswald: Growth studies of Ti-based films deposited on Si and SiO2 using angle-resolved XPS, Surface and Interface Analysis 42 (2010), S. 1289-1294

S. Oswald, F. Oswald: Application of angle-resolved X-ray photon electron spectroscopy for interface and layer growth studies demonstrated on Ti/Ta-based films deposited on SiO2, Analytical and Bioanalytical Chemistry 396 (2010) Nr. 8, S. 2805-2812

J.M. Park, D.H. Kim, K.B. Kim, J. Eckert: Improving the plasticity of a high strength FeSiTi ultrafine composite by introduction of an immiscible element, Applied Physics Letters 97 (2010) Nr. 25, S. 251915/1-3 URL

J.M. Park, K.B. Kim, D.H. Kim, N. Mattern, R. Li, G. Liu, J. Eckert: Multi-phase Al-based ultrafine composite with multi-scale microstructure, Intermetallics 18 (2010) Nr. 10, S. 1829-1833 URL

J.M. Park, J. Jayaraj, D.H. Kim, N. Mattern, G. Wang, J. Eckert: Tailoring of in situ Ti-based bulk glassy matrix composites with high mechanical performance, Intermetallics 18 (2010) Nr. 10, S. 1908-1911 URL

J.M. Park, G. Wang, R. Li, N. Mattern, J. Eckert, D.H. Kim: Enhancement of plastic deformability in FeNiNbB bulk glassy alloys by controlling the Ni-to-Fe concentration ratio, Applied Physics Letters 96 (2010) Nr. 3, S. 31905/1-3 URL

J.M. Park, J.H. Na, D.H. Kim, K.B. Kim, N. Mattern, U. Kuehn, J. Eckert: Medium range ordering and its effect on plasticity of FeMnBYNb bulk metallic glass, Philosophical Magazine 90 (2010) Nr. 19, S. 2619-2633 URL

J.M. Park, S. Pauly, N. Mattern, D.H. Kim, K.B. Kim, J. Eckert: Microstructural modulations enhance the mechanical properties in Al-Cu-(Si, Ga) ultrafine composites, Advanced Engineering Materials 12 (2010) Nr. 11, S. 1137-1141

S. Pauly, G. Liu, S. Gorantla, G. Wang, U. Kuehn, D.H. Kim, J. Eckert: Criteria for tensile plasticity in Cu-Zr-Al bulk metallic glasses, Acta Materialia 58 (2010) Nr. 14, S. 4883-4890 URL

S. Pauly, J. Bednarcik, U. Kuehn, J. Eckert: Plastically deformable Cu-Zr intermetallics, Scripta Materialia 63 (2010), S. 336-338 URL

S. Pauly, S. Gorantla, G. Wang, U. Kuehn, J. Eckert: Transformation-mediated ductility in CuZr-based bulk metallic glasses, nature materials 9 (2010), S. 473-477 URL

D.H. Pi, J.M. Park, G.A. Song, J.H. Han, K.R. Lim, S. Yi, S.H. Yi, D.H. Kim, N.S. Lee, Y. Seo, K.B. Kim: Effect of Si on microstructure and mechanical properties of Fe-based ultrafine eutectic composites, Intermetallics 18 (2010) Nr. 10, S. 1856-1859 URL

D.H. Pi, G.A. Song, J.H. Han, J.M. Park, G.R. Lim, D.H. Kim, S. Yi, S.H. Yie, N.S. Lee, Y. Seo, K.B. Kim: Effect of Nb on microstructure and mechanical properties of ultrafine eutectic Fe-Ni-B-Si composites, Journal of Alloys and Compounds 504 S (2010), S. S487-S490 URL

J. Potfajova, B. Schmidt, M. Helm, T. Gemming, M. Benyoucef, A. Rastelli, O.G. Schmidt: Microcavity enhanced silicon light emitting pn-diode, Applied Physics Letters 96 (2010) Nr. 15, S. 151113/1-3 URL

R.T. Qu, M. Stoica, J. Eckert, Z.F. Zhang: Tensile fracture morphologies of bulk metallic glass, Journal of Applied Physics 108 (2010) Nr. 6, S. 63509/1-9 URL

T. Roessler, J. Gluch, M. Albert, J.W. Bartha: Electrical characterisation of HfYO MIM-structures deposited by ALD, Thin Solid Films 518 (2010), S. 4680-4683 URL

D. Scharnweber, F. Schlottig, S. Oswald, K. Becker, H. Worch: How is wettability of titanium surfaces influenced by their preparation and storage conditions?, Journal of Materials Science/ Materials in Medicine 21 (2010) Nr. 2, S. 525-532 URL

A. Schlieter, U. Kuehn, J. Eckert, H.-J. Seifert: Microstructure, thermal, and mechanical characterization of rapidly solidified high strength Fe84.3Cr4.3Mo4.6V2.2C4.6, Journal of Materials Research 25 (2010) Nr. 6, S. 1164-1171 URL

B. Schwarz, D. Kraft, R. Theissmann, H. Ehrenberg: Magnetic properties of the (CoxMn1-x)4Nb2O9 solid solution series, Journal of Magnetism and Magnetic Materials 322 (2010) Nr. 5, S. L1-L3 URL

B. Schwarz, B. Podmilsak, N. Mattern, J. Eckert: Magnetocaloric effect in Gd-based Gd60FexCo30-xAl10 metallic glasses, Journal of Magnetism and Magnetic Materials 322 (2010) Nr. 16, S. 2298-2303 URL

B. Schwarz, N. Mattern, S. Oswald, J. Eckert: Surface oxidation and magnetic properties of (Cu60Co40)68Zr32 glassy ribbons, Journal of Alloys and Compounds 506 (2010) Nr. 2, S. 520-525 URL

S. Scudino, K.B. Surreddi, G. Wang, J. Eckert: Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints, Scripta Materialia 62 (2010) Nr. 10, S. 750-753 URL

S. Scudino, K.B. Surreddi, J. Eckert: Mechanical properties of cold-rolled Zr60Ti5Ag5Cu12.5Ni10Al7.5 metallic glass, Physica Status Solidi A 207 (2010), S. 1118-1121 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, F. Alia, J. Eckert: Structure and mechanical properties of AlMg alloys produced by copper mold casting, Journal of Alloys and Compounds 504 (2010) Nr. Supplement 1, S. S483-S486 URL

S. Scudino, F. Ali, K.B. Surreddi, K.G. Prashanth, M. Sakaliyska, J. Eckert: Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles, Journal of Physics: Conference Series 240 (2010) Nr. 1, S. 12154/1-4 URL

S. Scudino, K.B. Surreddi, M.S. Khoshkhoo, M. Sakaliyska, G. Wang, J. Eckert: Improved room temperature plasticity of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by channel-die compression, Advanced Engineering Materials 12 (2010) Nr. 11, S. 1123-1126

A. Senyshyn, B. Schwarz, T. Lorenz, V.T. Adamiv, Y.V. Burak, J. Banys, R. Grigalaitis, L. Vasylechko, H. Ehrenberg, H. Fuess: Low-temperature crystal structure, specific heat, and dielectric properties of lithium tetraborate Li2B4O7, Journal of Applied Physics 108 (2010) Nr. 9, S. 93524/1-9 URL

G.A. Song, D.H. Kim, D.H. Kim, M.H. Lee, J.K. Lee, J.M. Park, J. Eckert, Y. Seo, K.B. Kim: Deformation mechanisms of a bimodal eutectic Mg72Cu5Zn23 ultrafine composite, Materials Letters 64 (2010), S. 534-536 URL

M. Spindler, S.B. Menzel, J. Eckert, C. Eggs: Influence of Al on resistance and power durability of Cu- based SAW metallizations, IOP Conference Series: Materials Science and Engineering 8 (2010) Nr. 1, S. 12013/1-5 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch: Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming, Materials Science and Engineering A 527 (2010) Nr. 10-11, S. 2747-2758 URL

M. Stoica, N. Van Steenberge, J. Bednarcik, N. Mattern, H. Franz, J. Eckert: Changes in short-range order of Zr55Cu30Al10Ni5 and Zr55Cu20Al10Ni10Ti5 BMGs upon annealing, Journal of Alloys and Compounds 506 (2010) Nr. 1, S. 85-87 URL

M. Stoica, J. Das, J. Bednarcik, G. Wang, G. Vaughan, W.H. Wang, J. Eckert: Mechanical response of metallic glasses: Insights from in-situ high energy X-ray diffraction, JOM: the Journal of the Minerals, Metals and Materials Society 62 (2010) Nr. 2, S. 76-82

M. Stoica, S. Roth, J. Eckert, T. Karan, S. Ram, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses with Cu additions, Physica Status Solidi C 7 (2010) Nr. 5, S. 1331-1335 URL

M. Stoica, R. Li, A.R. Yavari, G. Vaughan, J. Eckert, N. Van Steenberge, D.R. Romera: Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses, Journal of Alloys and Compounds 504S (2010), S. S123-128 URL

S. Strehle, S. Menzel, J.W. Bartha, K. Wetzig: Electroplating of Cu(Ag) thin films for interconnect applications, Microelectronic Engineering 87 (2010) Nr. 2, S. 180-186 URL

K.B. Surreddi, V.C. Srivastava, S. Scudino, M. Sakaliyska, V. Uhlenwinkel, J.S. Kim, J. Eckert: Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering, Journal of Physics: Conference Series 240 (2010), S. 12155/1-4 URL

K.B. Surreddi, S. Scudino, M. Sakaliyska, K.G. Prashanth, D.J. Sordelet, J. Eckert: Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder, Journal of Alloys and Compounds 491 (2010), S. 137-142 URL

D.M. Trots, A. Senyshyn, B.C. Schwarz: Low temperature structural variations and molar heat capacity of stolzite, PbWO4, Journal of Solid State Chemistry 183 (2010), S. 1245-1251 URL

L. de Abreu Vieira, M. Doebeli, A. Dommann, E. Kalchbrenner, A. Neels, J. Ramm, H. Rudigier, J. Thomas, B. Widrig: Approaches to influence the microstructure and the properties of AlCrO layers synthesized by cathodic arc evaporation, Surface and Coatings Technology 204 (2010), S. 1722-1728 URL

M. Voronov, P. Smid, V. Hoffmann, T. Hofmann, C. Venzago: Microsecond pulsed glow discharge in fast flow Grimm type sources for mass spectrometry, Journal of Analytical Atomic Spectrometry 25 (2010), S. 511-518 URL

H. Wang, J.-P. Laval, H. Ehrenberg, H. Fuess, S. Arrii-Clacens, H. Luo, B. Elouadi: Structural and phase transitions in the high composition domain of the system (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3, Ferroelectrics 400 (2010), S. 362-371

S.P. Yuan, R.H. Wang, G. Liu, R. Li, J.M. Park, J. Sun, K.-H. Chen: Effects of precipitate morphology on the notch sensitivity of ductile fracture in heat-treatable aluminum alloys, Materials Science and Engineering A 527 (2010) Nr. 27-28, S. 7369-7381 URL

K. Zagorodniy, G. Seifert, H. Hermann: Metal-organic frameworks as promising candidates for future ultralow-k dielectrics, Applied Physics Letters 97 (2010) Nr. 25, S. 251905/1-2 URL

L.C. Zhang, H.B. Lu, M. Calin, E.V. Pereloma, J. Eckert: High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure, Journal of Physics: Conference Series 240 (2010), S. 12103/1-5 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation-induced grain refinement in body-centered cubic CoFe alloys upon room temperature compression, Materials Science and Engineering A 527 (2010) Nr. 21-22, S. 5796-5800 URL

N. Zheng, G. Wang, L.C. Zhang, M. Calin, M. Stoica, G. Vaughan, N. Mattern, J. Eckert: In situ high-energy x-ray diffraction observation of structural evolution in a Ti-based bulk metallic glass upon heating, Journal of Materials Research 25 (2010) Nr. 12, S. 2271-2277 URL

M. Zschornak, S. Gemming, E. Gutmann, T. Weissbach, H. Stoecker, T. Leisegang, T. Riedl, M. Traenkner, T. Gemming, D.C. Meyer: Surface modeling and chemical solution deposition of SrO(SrTiO3)n Ruddlesden - Popper phases, Acta Materialia 58 (2010) Nr. 14, S. 4650-4659 URL

2009

L. Balsanova, D. Mikhailova, A. Senyshyn, D. Trots, H. Fuess, W. Lottermoser, H. Ehrenberg: Structure and properties of a-AgFe2(MoO4)3, Solid State Sciences 11 (2009) Nr. 6, S. 1137-1143 URL

M. Baricco, T.A. Baser, J. Das, J. Eckert: Correlation between Poisson ratio and Mohr-Coulomb coefficient in metallic glasses, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 125-131 URL

T.A. Baser, J. Das, J. Eckert, M. Baricco: Glass formation and mechanical properties of (Cu50Zr50)100-xAlx (x = 0, 4, 5, 7) bulk metallic glasses, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 146-149 URL

H. Bih, I. Saadoune, H. Ehrenberg, H. Fuess: Crystal structure, magnetic and infrared spectroscopy studies of the LiCryFe1-yP2O7 solid solution, Journal of Solid State Chemistry 182 (2009), S. 821-826 URL

N.N. Bramnik, D.M. Trots, H.J. Hofmann, H. Ehrenberg: Mixed LiCo0.6M0.4PO4 (M = Mn, Fe, Ni) phosphates: cycling mechanism and thermal stability, Physical Chemistry Chemical Physics 11 (2009) Nr. 17, S. 3271-3277 URL

M. Bystrzejewski, A. Bachmatiuk, J. Thomas, P. Ayala, H.-W. Huebers, T. Gemming, E. Borowiak-Palen, T. Pichler, R.J. Kalenczuk, B. Buechner, M.H. Ruemmeli: Boron doped carbon nanotubes via ceramic catalysts, Physica Status Solidi RRL 3 (2009) Nr. 6, S. 193-195

M. Bystrzejewski, A. Huczko, M. Soszynski, S. Cudzilo, W. Kaszuwara, T. Gemming, M.H. Ruemmeli, H. Lange: An easy one-step route to carbon-encapsulated magnetic nanoparticles, Fullerenes, Nanotubes and Carbon Nanostructures 17 (2009), S. 600-615

J. Das, S. Pauly, M. Bostroem, K. Durst, M. Goeken, J. Eckert: Designing bulk metallic glass and glass matrix composites in martensitic alloys, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 97-101 URL

M.E. Arroyo y de Dompablo, U. Amador, J.M. Gallardo-Amores, E. Moran, H. Ehrenberg, L. Dupont, R. Dominko: Polymorphs of Li3PO4 and Li2MSiO4 (M = Mn, Co): The role of pressure, Journal of Power Sources 189 (2009) Nr. 1, S. 638-642 URL

H. Ehrenberg, N.N. Bramnik, A. Senyshyn, H. Fuess: Crystal and magnetic structures of electrochemically delithiated Li1-xCoPO4 phases, Solid State Sciences 11 (2009), S. 18-23 URL

A. Elsner, A. Wagner, T. Aste, H. Hermann, D. Stoyan: Specific surface area and volume fraction of the cherry-pit model with packed pits, Journal of Physical Chemistry B 113 (2009), S. 7780-7784 URL

J.M. Engel, H. Ahsbahs, H. Fuess, H. Ehrenberg: Polymorphism of K2Co2Mo3O12: variations in the packing schemes and changes in molybdenum coordination under high pressure, Acta Crystallographica B 65 (2009), S. 29-35

R. Essehli, B. El Bali, H. Ehrenberg, I. Svoboda, N. Bramnik, H. Fuess: Co0.5TiOPO4: Crystal structure, magnetic and electrochemical properties, Materials Research Bulletin 44 (2009) Nr. 4, S. 817-821 URL

J.T. Fan, Z.F. Zhang, S.X. Mao, B.L. Shen, J. Eckert: Serrated flow behavior induced by blunt mechanism of shear crack propagation in metallic glass, Journal of Materials Research 24 (2009) Nr. 2, S. 436-440 URL

A. Feldhoff, J. Martynczuk, M. Arnold, M. Myndyk, I. Bergmann, V. Sepelak, W. Gruner, U. Vogt, A. Haehnel, J. Woltersdorf: Spin-state transition of iron in (Ba0.5Sr0.5)(Fe0.8Zn0.2)O3-delta perovskite, Journal of Solid State Chemistry 182 (2009), S. 2961-2971 URL

W. Gruner, J. Hassler, P. Barth, J. Behm, J. Sunderkoetter: The precise determination of nitrogen in boron nitride, Journal of the European Ceramic Society 29 (2009) Nr. 10, S. 2029-2035 URL

A. Herrera-Gomez, J.T. Grant, P.J. Cumpson, M. Jenko, F.S. Aguirre-Tostado, C.R. Brundle, T. Conard, G. Conti, C.S. Fadley, J. Fulghum, K. Kobayashi, L. Koever, H. Nohira, R.L. Opila, S. Oswald, R.W. Paynter, R.M. Wallace, W.S.M. Werner, J. Wolstenholme: Report on the 47th IUVSTA Workshop Angle-Resolved XPS: the current status and future prospects for angle-resolved XPS of nano and subnano films, Surface and Interface Analysis 41 (2009) Nr. 11, S. 840-857

C. Hossbach, S. Teichert, J. Thomas, L. Wilde, H. Wojcik, D. Schmidt, B. Adolphi, M. Bertram, U. Muehle, M. Albert, S. Menzel, B. Hintze, J.W. Bartha: Properties of plasma-enhanced atomic layer deposition-grown tantalum carbonitride thin films, Journal of the Electrochemical Society 156 (2009) Nr. 11, S. H 852-H 859 URL

H.-J. Jun, K.S. Lee, U. Kuehn, J. Eckert, Y.W. Chang: Effect of crystalline phases on deformation and warm formability of a bulk metallic glass composite within supercooled liquid region, Materials Science and Engineering A 525 (2009) Nr. 1-2, S. 62-68 URL

I. Kaban, P. Jovari, M. Stoica, J. Eckert, W. Hoyer, B. Beuneu: Topological and chemical ordering in Co43Fe20Ta5.5B31.5 metallic glass, Physical Review B 79 (2009) Nr. 21, S. 212201/1-4 URL

D. Klemm, V. Hoffmann, K. Wetzig, J. Eckert: DC-and RF-GD-OES measurements of adsorbed organic monolayers on copper, Analytical and Bioanalytical Chemistry 395 (2009) Nr. 6, S. 1893-1900

D. Klemm, V. Hoffmann, C. Edelmann: Controlling of material analysers of the GD-OES type with help of pump-down curves, Vacuum 84 (2009) Nr. 2, S. 299-303 URL

V. Kokotin, H. Hermann: Geometrical aspects of the glass-forming ability of dense binary hard-sphere mixtures, Scripta Materialia 61 (2009) Nr. 3, S. 261-264 URL

N.V. Kuratieva, D. Mikhailova, H. Ehrenberg: A new polymorph of Cu3B2O6, Acta Crystallographica C 65 (2009), S. i85-i86

S. Laubach, S. Laubach, P.C. Schmidt, D. Ensling, S. Schmid, W. Jaegermann, A. Thissen, K. Nikolowski, H. Ehrenberg: Changes in the crystal and electronic structure of LiCoO2 and LiNiO2 upon Li intercalation and de-intercalation, Physical Chemistry Chemical Physics 11 (2009) Nr. 17, S. 3278-3289 URL

M.H. Lee, J.K. Lee, K.T. Kim, J. Thomas, J. Das, U. Kuehn, J. Eckert: Deformation-induced microstructural heterogeneity in monolithic Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass, Physica Status Solidi RRL 3 (2009) Nr. 2-3, S. 46-48

K.S. Lee, H.-J. Jun, S. Pauly, B. Bartusch, Y.W. Chang, J. Eckert: Thermomechanical characterization of Cu47.5Zr47.5Al5 bulk metallic glass within the homogeneous flow regime, Intermetallics 17 (2009) Nr. 1, S. 65-71 URL

K.S. Lee, J.-H. Lee, J. Eckert: On the structural relaxation of bulk metallic glass under warm deformation, Intermetallics 17 (2009) Nr. 4, S. 222-226 URL

J.K. Lee, K.B. Kim, M.H. Lee, T.S. Kim, J.C. Bae: Microstructure and mechanical properties of metallic glass/metallic glass composites, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 286-288 URL

X. Li, Y.J. Wei, H. Ehrenberg, D.L. Liu, S.Y. Zhan, C.Z. Wang, G. Chen: X-ray diffraction and Raman scattering studies of Li+/e--extracted inverse spinel LiNiVO4, Journal of Alloys and Compounds 471 (2009) Nr. 1-2, S. L26-L28 URL

R. Li, M. Stoica, J. Eckert: Effect of minor Cu addition on phase evolution and magnetic properties of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}100-x Cux alloys, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12042/1-4 URL

R. Li, S. Kumar, S. Ram, M. Stoica, S. Roth, J. Eckert: Crystallization and magnetic properties of [(Fe,Co)0.75Si0.05B0.20]94Nb6 metallic glasses, Journal of Physics D 42 (2009) Nr. 8, S. 85006/1-6 URL

N. Mattern, G. Goerigk, U. Vainio, M.K. Miller, T. Gemming, J. Eckert: Spinodal decomposition of Ni-Nb-Y metallic glasses, Acta Materialia 57 (2009) Nr. 3, S. 903-908 URL

N. Mattern, P. Jovari, I. Kaban, S. Gruner, A. Elsner, V. Kokotin, H. Franz, B. Beuneu, J. Eckert: Short-range order of Cu-Zr metallic glasses, Journal of Alloys and Compounds 485 (2009), S. 163-169 URL

N. Mattern, J. Bednarcik, S. Pauly, G. Wang, J. Das, J. Eckert: Structural evolution of Cu-Zr metallic glasses under tension, Acta Materialia 57 (2009) Nr. 14, S. 4133-4139 URL

E. Menendez, M.O. Liedke, J. Fassbender, T. Gemming, A. Weber, L.J. Heyderman, K.V. Rao, S.C. Deevi, S. Surinach, M.D. Baro, J. Sort, J. Nogues: Direct magnetic patterning due to the generation of ferromagnetism by selective ion irradiation of paramagnetic FeAl alloys, Small 5 (2009) Nr. 2, S. 229-234 URL

S.B. Menzel, J. Thomas, U. Weissker, F. Schaeffel, C. Hossbach, M. Albert, S. Hampel, T. Gemming: Preparation of CNT-copper matrix composite films, Journal of Nanoscience and Nanotechnology 9 (2009), S. 6096-6103

D. Mikhailova, H. Ehrenberg, D. Trots, G. Brey, S. Oswald, H. Fuess: CrxRe1-xO2 oxides with different rutile-like structures: changes in the electronic configuration and resulting physical properties, Journal of Solid State Chemistry 182 (2009), S. 1506-1514 URL

D. Mikhailova, H. Ehrenberg, S. Oswald, D. Trots, G. Brey, H. Fuess: Metallic Re-Re bond formation in different MRe2O6 (M=Fe,Co,Ni) rutile-like polymorphs: the role of temperature in high-pressure synthesis, Journal of Solid State Chemistry 182 (2009) Nr. 2, S. 364-373 URL

K. Nikolowski, S. Scudino, M. Stoica, K.B. Surreddi, J. Das, J. Eckert: Stress-induced martensitic transformation in a Ti45Zr38Al17 cast rod, Journal of Physics: Conference Series 144 (2009), S. 12090/1-4 URL

S. Oswald, K. Nikolowski, H. Ehrenberg: Quasi in situ XPS investigations on intercalation mechanisms in Li-ion battery materials, Analytical and Bioanalytical Chemistry 393 (2009) Nr. 8, S. 1871-1877

S. Oswald, R. Hermann, B. Schmidt: SIMS measurement of oxygen content in y -TiAl single crystals and polycrystalline alloys with Nb addition, Materials Science and Engineering A 516 (2009) Nr. 1-2, S. 54-57 URL

J.M. Park, N. Mattern, U. Kuehn, J. Eckert, K.B. Kim, W.T. Kim, K. Chattopadhyay, D.H. Kim: High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity, Journal of Materials Research 24 (2009) Nr. 8, S. 2605-2609 URL

J.M. Park, J.H. Han, K.B. Kim, N. Mattern, J. Eckert, D.H. Kim: Favorable microstructural modulation and enhancement of mechanical properties of TiFeNb ultrafine composites, Philosophical Magazine Letters 89 (2009) Nr. 10, S. 623-632

S. Pauly, J. Das, N. Mattern, D.H. Kim, J. Eckert: Phase formation and thermal stability in Cu-Zr-Ti(Al) metallic glasses, Intermetallics 17 (2009) Nr. 6, S. 453-462 URL

S. Pauly, J. Das, J. Bednarcik, N. Mattern, K.B. Kim, D.H. Kim, J. Eckert: Deformation-induced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites, Scripta Materialia 60 (2009) Nr. 6, S. 431-434 URL

S. Pauly, G. Liu, G. Wang, J. Das, K.B. Kim, U. Kuehn, D.H. Kim, J. Eckert: Modeling deformation behavior of CuZrAl bulk metallic glass matrix composites, Applied Physics Letters 95 (2009) Nr. 10, S. 101906/1-3 URL

S. Pauly, G. Liu, G. Wang, U. Kuehn, N. Mattern, J. Eckert: Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites, Acta Materialia 57 (2009) Nr. 18, S. 5445-5453 URL

S. Pauly, M.H. Lee, D.H. Kim, K.B. Kim, D.J. Sordelet, J. Eckert: Crack evolution in bulk metallic glasses, Journal of Applied Physics 106 (2009) Nr. 10, S. 103518/1-7 URL

D.H. Pi, J.K. Lee, M.H. Lee, S. Yi, J. Eckert, K.B. Kim: Role of heterogeneity on deformation behavior of bulk metallic glasses, Journal of Alloys and Compounds 486 (2009), S. 233-236 URL

B. Podmiljsak, P.J. McGuiness, N. Mattern, H. Ehrenberg, S. Kobe, S. Jozef, S. Ljubljana: Magnetocaloric properties in the Gd$_{5}$(Si$_{2}$Ge$_{2}$) $_{1-{rm z}}$Fe $_{rm z}({rm Z}=0-0.75)$ system and the magnetic properties of the newly formed Gd $_{5}$(Si,Ge) $_{3}$p phase, IEEE Transactions on Magnetics 45 (2009) Nr. 10, S. 4364-4367

K.G. Prashanth, S. Scudino, B.S. Murty, J. Eckert: Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders, Journal of Alloys and Compounds 477 (2009) Nr. 1-2, S. 171-177 URL

K.G. Prashanth, S. Scudino, K.B. Surreddi, M. Sakaliyska, B.S. Murty, J. Eckert: Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots, Materials Science and Engineering A 513-514 (2009), S. 279-285 URL

R.-T. Qu, F.-F. Wu, Z.-F. Zhang, J. Eckert: Direct observations on the evolution of shear bands into cracks in metallic glass, Journal of Materials Research 24 (2009) Nr. 10, S. 3130-3135 URL

N. Qureshi, M. Zbiri, J. Rodriguez-Carvajal, A. Stunault, E. Ressouche, T.C. Hansen, M.T. Fernandez-Diaz, R. Johnson, H. Fuess, H. Ehrenberg, Y. Sakurai, M. Itou, B. Gillon, T. Wolf, J.A. Rodriguez-Velamazan, J. Sanchez-Montero: Experimental magnetic form factors in Co3V2O8: A combined study of ab initio calculations, magnetic Compton scattering, and polarized neutron diffraction, Physical Review B 79 (2009) Nr. 9, S. 94417/1-10 URL

R. Ranjan, R. Garg, A. Senyshyn, M.S. Hegde, H. Ehrenberg, H. Boysen: Magneto-structural study of a Cr-doped CaRuO3, Journal of Physics / Condensed Matter 21 (2009) Nr. 32, S. 326001/1-6 URL

T. Riedl, T. Gemming, K. Doerr, M. Luysberg, K. Wetzig: Mn valency at La0.7Sr0.3MnO3/SrTiO3 (0 0 1) thin film interfaces, Microscopy and Microanalysis 15 (2009), S. 213-221

T. Riedl, T. Gemming, T. Weissbach, G. Seifert, E. Gutmann, M. Zschornack, D.C. Meyer, S. Gemming: ELNES study of chemical solution deposited SrO(SrTiO3)n RuddlesdenPopper films: experiment and simulation, Ultramicroscopy 110 (2009) Nr. 1, S. 26-32 URL

M.O. Rikel, D. Isfort, M. Klein, J. Ehrenberg, J. Bock, E.D. Specht, M. Sun-Wagener, O. Weber, D. Sporn, S. Engel, O. de Haas, R. Semerad, M. Schubert, B. Holzapfel: Simplified procedure for estimating epitaxy of La2Zr2O7-buffered NiW RABITS using XRD, IEEE Transactions on Applied Superconductivity 19 (2009) Nr. 3, S. 3307-3310

A. Rother, T. Gemming, H. Lichte: The statistics of the thermal motion of the atoms during imaging process in transmission electron microscopy and related techniques, Ultramicroscopy 109 (2009) Nr. 2, S. 139-146 URL

A. Sarapulova, D. Mikhailova, A. Senyshyn, H. Ehrenberg: Crystal structure and magnetic properties of Li,Cr-containing molybdates Li3Cr(MoO4)3, LiCr(MoO4)2 and Li1.8Cr1.2(MoO4)3, Journal of Solid State Chemistry 182 (2009) Nr. 12, S. 3262-3268 URL

S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty, J. Eckert: Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy, Acta Materialia 57 (2009) Nr. 6, S. 2029-2039 URL

S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi, J. Eckert: Powder metallurgy of Al-based metal matrix composites reinforced with beta - Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties, Acta Materialia 57 (2009), S. 4529-4538 URL

S. Scudino, P. Donnadieu, K.B. Surreddi, K. Nikolowski, M. Stoica, J. Eckert: Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys, Intermetallics 17 (2009) Nr. 7, S. 532-539 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert: Mechanical alloying and milling of Al-Mg alloys, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 2-7 URL

S. Scudino, S. Venkataraman, M. Stoica, K.B. Surreddi, S. Pauly, J. Das, J. Eckert: Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 227-230 URL

S. Scudino, K.B. Surreddi, H.V. Nguyen, G. Liu, T. Gemming, M. Sakaliyska, J.S. Kim, J. Vierke, M. Wollgarten, J. Eckert: High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders, Journal of Materials Research 24 (2009) Nr. 9, S. 2909-2916 URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert: Solid-state processing of Al-Mg alloys, Journal of Physics: Conference Series 144 (2009), S. 12019/1-4 URL

S. Scudino, B. Bartusch, J. Eckert: Viscosity of the supercooled liquid in multi-component Zr-based metallic glasses, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12097/1-4 URL

A. Senyshyn, D.M. Trots, J.M. Engel, L. Vasylechko, H. Ehrenberg, T. Hansen, M. Berkowski, H. Fuess: Anomalous thermal expansion in rare-earth gallium perovskites: a comprehensive powder diffraction study, Journal of Physics / Condensed Matter 21 (2009) Nr. 14, S. 145405/1-4 URL

G.P. Singh, S. Ram, J. Eckert, H.-J. Fecht: Synthesis and morphological stability in CrO2 single crystals of a half-metallic ferromagnetic compound, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12110/1-4 URL

V.C. Srivastava, K.B. Surreddi, V. Uhlenwinkel, A. Schulz, J. Eckert, H.-W. Zoch: Formation of nanocrystalline matrix composite during spray forming of Al83La5Y5Ni5Co2, Metallurgical and Materials Transactions A 40 (2009) Nr. 2, S. 450-461 URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, A. Rosenauer, H.-W. Zoch, J. Eckert: Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures, Transactions of The Indian Institute of Metals 62 (2009) Nr. 4-5, S. 331-335 URL

M. Stangl, M. Liptak, J. Acker, V. Hoffmann, S. Baunack, K. Wetzig: Influence of incorporated non-metallic impurities on electromigration in copper damascene interconnect lines, Thin Solid Films 517 (2009), S. 2687-2690 URL

M. Stoica, M. Emmi, S. Ram, A. Wiedenmann, O. Perroud, J. Eckert: Microstructure and magnetic properties of binary Nd80Fe20 with Ga additions, Journal of Physics: Conference Series 144 (2009) Nr. 1, S. 12103/1-4 URL

M. Stoica, S. Kumar, S. Roth, S. Ram, J. Eckert, G. Vaughan, A.R. Yavari: Crystallization kinetics and magnetic properties of Fe66Nb4B30 bulk metallic glass, Journal of Alloys and Compounds 483 (2009) Nr. 1-2, S. 632-637 URL

S. Strehle, J.W. Bartha, K. Wetzig: Electrical properties of electroplated Cu(Ag) thin films, Thin Solid Films 517 (2009) Nr. 11, S. 3320-3325 URL

S. Strehle, S. Menzel, A. Jahn, U. Merkel, J.W. Bartha, K. Wetzig: Electromigration in electroplated Cu(Ag) alloy thin films investigated by means of single damascene Blech structures, Microelectronic Engineering 86 (2009) Nr. 12, S. 2396-2403 URL

K.B. Surreddi, S. Scudino, H.V. Nguyen, K. Nikolowski, M. Stoica, M. Sakaliyska, J.S. Kim, T. Gemming, J. Vierke, M. Wollgarten, J. Eckert: Spark plasma sintering of gas atomized Al87Ni8La5 amorphous powder, Journal of Physics: Conference Series 144 (2009), S. 12079/1-5 URL

A. Teresiak, M. Uhlemann, A. Gebert, J. Thomas, J. Eckert, L. Schultz: Formation of nanostructured LaMg2Ni by rapid quenching and intensive milling and its hydrogen reactivity, Journal of Alloys and Compounds 481 (2009) Nr. 1-2, S. 144-151 URL

A. Teresiak, M. Uhlemann, J. Thomas, A. Gebert: The metastable Mg6Ni phase - Thermal behaviour, crystal structure and hydrogen reactivity of the rapidly quenched alloy, Journal of Alloys and Compounds 475 (2009) Nr. 1-2, S. 191-197 URL

J. Thomas, J. Schumann, H. Vinzelberg, E. Arushanov, R. Engelhard, O.G. Schmidt, T. Gemming: Epitaxial Fe3Si films on GaAs(100) substrates by means of electron beam evaporation, Nanotechnology 20 (2009) Nr. 23, S. 235604/1-9 URL

T. Waechtler, S. Oswald, N. Roth, A. Jakob, H. Lang, R. Ecke, S.E. Schulz, T. Gessner, A. Moskvinova, S. Schulze, M. Hietschold: Copper oxide films grown by atomic layer deposition from Bis(tri-n-butylphosphane)copper(I)acetylacetonate on Ta, TaN, Ru, and SiO2, Journal of the Electrochemical Society 156 (2009) Nr. 6, S. H453-H459 URL

G. Wang, N. Mattern, S. Pauly, J. Bednarcik, J. Eckert: Atomic structure evolution in bulk metallic glass under compressive stress, Applied Physics Letters 95 (2009) Nr. 25, S. 251906/1-3 URL

Y.J. Wei, K. Nikolowski, S.Y. Zhan, H. Ehrenberg, S. Oswald, G. Chen, C.Z. Wang, H. Chen: Electrochemical kinetics and cycling performance of nano Li[Li0.23Co0.3Mn0.47]O2 cathode material for lithium ion batteries, Electrochemistry Communications 11 (2009) Nr. 10, S. 2008-2011 URL

Y.J. Wei, H. Ehrenberg, K.B. Kim, C.W. Park, Z.F. Huang, C. Baehtz: Characterizations on the structural and electronic properties of thermal lithiated Li0.33MnO2, Journal of Alloys and Compounds 470 (2009) Nr. 1-2, S. 273-277 URL

Z. Weiss, E.B.M. Steers, P. Smid, V. Hoffmann: Towards a catalogue of glow discharge emission spectra, Journal of Analytical Atomic Spectrometry 24 (2009) Nr. 1, S. 27-33 URL

F.F. Wu, Z.F. Zhang, S.X. Mao, J. Eckert: Effect of sample size on ductility of metallic glass, Philosophical Magazine Letters 89 (2009) Nr. 3, S. 178-184

W. Xu, X. Wu, R.B. Figueiredo, M. Stoica, M. Calin, J. Eckert, T.G. Langdon, K. Xia: Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion, International Journal of Materials Research 100 (2009) Nr. 12, S. 1662-1667

W. Xu, X. Wu, M. Calin, M. Stoica, J. Eckert, K. Xia: Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability, Scripta Materialia 60 (2009) Nr. 11, S. 1012-1015 URL

S.Y. Zhan, C.Z. Wang, K. Nikolowski, H. Ehrenberg, G. Chen, Y.J. Wei: Electrochemical properties of Cr doped V2O5 between 3.8 V and 2.0 V, Solid State Ionics 180 (2009), S. 1198-1203 URL

G.J. Zhang, R.H. Wang, S.P. Yuan, G. Liu, S. Scudino, J. Sun, K.H. Chen: Influence of constituents on the ductile fracture of AlCuMg alloys: Modulated by the aging treatment, Materials Science and Engineering A 526 (2009), S. 171-176 URL

J.X. Zhao, R.T. Qu, F.F. Wu, Z.F. Zhang, B.L. Shen, M. Stoica, J. Eckert: Fracture mechanism of some brittle metallic glasses, Journal of Applied Physics 105 (2009) Nr. 10, S. 103519/1-6 URL

2008

M.E. Arroyo-deDompablo, R. Dominko, J.M. Gallardo-Amores, L. Dupont, G. Mali, H. Ehrenberg, J. Jamnik, E. Moran: On the energetic stability and electrochemistry of Li2MnSiO4 polymorphs, Chemistry of Materials 20 (2008), S. 5574-5584 URL

J. Bednarcik, S. Venkataraman, O. Khvostikova, H. Franz, D.J. Sordelet, J. Eckert: Microstructural changes induced by thermal treatment in Cu47Ti33Zr11Ni8Si1 metallic glass, Materials Science and Engineering A 498 (2008) Nr. 1-2, S. 335-340 URL

M.S. Bhuvaneswari, N.N. Bramnik, D. Ensling, H. Ehrenberg, W. Jaegermann: Synthesis and characterization of Carbon Nano Fiber/LiFePO4 composites for Li-ion batteries, Journal of Power Sources 180 (2008) Nr. 1, S. 553-560 URL

N.N. Bramnik, K. Nikolowski, D.M. Trots, H. Ehrenberg: Thermal stability of LiCoPO4 cathodes, Electrochemical and Solid-State Letters 11 (2008) Nr. 6, S. A89-A93 URL

N.N. Bramnik, H. Ehrenberg: Precursor-based synthesis and electrochemical performance of LiMnPO4, Journal of Alloys and Compounds 464 (2008) Nr. 1-2, S. 259-264 URL

Y. Das, K.B. Kim, Z.-F. Zhang, G. He, C. Mueller, J. Eckert: Deformation and fracture of Ti-base nanostructured composite, International Journal of Materials Research (Zeitschrift fuer Metallkunde) 99 (2008) Nr. 9, S. 985-990

J. Das, F. Ettingshausen, J. Eckert: Ti-base nanoeutectic-hexagonal structured (D019) dendrite composite, Scripta Materialia 58 (2008) Nr. 8, S. 631-634 URL

C. Duhamel, J. Das, S. Pauly, K.S. Lee, J. Eckert: Deformation behavior and fractographic features of ductile Cu47Zr47Al6 bulk metallic glass, Reviews on Advanced Materials Science 18 (2008) Nr. 5, S. 527-533 URL

J. Eckert, M. Calin, P. Yu, L.C. Zhang, S. Scudino, C. Duhamel: Al-based alloys containing amorphous and nanostructured phases, Reviews on Advanced Materials Science 18 (2008) Nr. 2, S. 169-172 URL

J. Eckert, J. Das, W. Xu, R. Theissmann: Nanoscale mechanism and intrinsic structure related deformation of Ti-alloys, Materials Science and Engineering A 493 (2008) Nr. 1-2, S. 71-78 URL

V.V. Efimova, M.V. Voronov, V. Hoffmann, J. Eckert: Electrical properties of pulsed glow discharge: two new aspects, Publications of the Astronomical Observatory of Belgrade 84 (2008), S. 369-373

A. Elmali, S. Tekerek, I. Dincer, Y. Elerman, R. Theissmann, H. Ehrenberg, H. Fuess: Magnetic hardening of high-energy ball-milled nanocrystalline LaMn2Si2, Journal of Magnetism and Magnetic Materials 320 (2008) Nr. 3-4, S. 364-367 URL

B.J. Fan, Z. Zhang, S.X. Mao, J. Eckert: Propagation and deflection of shear bands in metallic glass under circumferential constraint, Advanced Engineering Materials 10 (2008) Nr. 12, S. 1117-

J.H. Han, K.B. Kim, S. Yi, J.M. Park, S.W. Sohn, T.E. Kim, D.H. Kim, J. Das, J. Eckert: Formation of a bimodal eutectic structure in TiFeSn alloys with enhanced plasticity, Applied Physics Letters 93 (2008) Nr. 14, S. 141901/1-3 URL

J.H. Han, K.B. Kim, S. Yi, J.M. Park, D.H. Kim, S. Pauly, J. Eckert: Influence of a bimodal eutectic structure on the plasticity of a (Ti70.5Fe29.5)91Sn9 ultrafine composite, Applied Physics Letters 93 (2008) Nr. 20, S. 201906/1-3 URL

V.-D. Hodoroaba, D. Klemm, U. Reinholz, E. Strub, J. Roehrich, W. Bohne, V. Hoffmann, K. Wetzig: Potential candidates of certified reference material for determination of hydrogen concentration with glow discharge optical emission spectrometry (GD-OES)a feasibility study, Journal of Analytical Atomic Spectrometry 23 (2008) Nr. 4, S. 460-462 URL

V. Hoffmann, V.V. Efimova, M.V. Voronov, P. Smid, E.B.M. Steers, J. Eckert: Measurement of voltage and current in continuous and pulsed rf and dc glow discharges, Journal of Physics / Conference Series 133 (2008), S. 12017/1-12 URL

S. Kudela jr., S. Oswald, S. Kudela, K. Wetzig: Application of FTIR spectra for evaluating interfacial reactions in metal matrix composites, Analytical and Bioanalytical Chemistry 390 (2008) Nr. 6, S. 1477-1486

H.-J. Jun, K.S. Lee, J. Eckert, Y.W. Chang: High-temperature deformation behavior and formability of a Zr-Cu-Al-Ni bulk metallic glass, Metallurgical and Materials Transactions A 39 (2008) Nr. 8, S. 1831-1837

K.B. Kim, X.F. Zhang, S. Yi, M.H. Lee, J. Das, J. Eckert: Effect of local chemistry, structure and length scale of heterogeneities on the mechanical properties of a Ti45Cu40Ni7.5Zr5Sn2.5 bulk metallic glass, Philosophical Magazine Letters 88 (2008) Nr. 1, S. 75-81

K.B. Kim, J. Das, M.H. Lee, D.H. Kim, Lee, W.H., J. Eckert: Formation of nano-scale omega-phase in arc-melted micron-scale dendrite reinforced Zr73.5Nb9Cu7Ni1Al9.5 ultrafine composite during heat treatment, Intermetallics 16 (2008) Nr. 4, S. 538-543 URL

K.T. Kim, S.I. Cha, T. Gemming, J. Eckert, S.H. Hong: The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites, Small 4 (2008) Nr. 11, S. 1936-1940 URL

K.T. Kim, J. Eckert, S.B. Menzel, T. Gemming, S.H. Hong: Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites, Applied Physics Letters 92 (2008) Nr. 12, S. 121901/1-3 URL

D. Klemm, M. Stangl, A. Peeva, V. Hoffmann, K. Wetzig, J. Eckert: Analysis of interface impurities in electroplated Cu layers by using GD-OES and TOF-SIMS, Surface and Interface Analysis 40 (2008) Nr. 3-4, S. 418-422 URL

V. Kokotin, H. Hermann: Computational analysis of the atomic size effect in bulk metallic glasses and their liquid precursors, Acta Materialia 56 (2008) Nr. 18, S. 5058-5065 URL

T. Kroll, S. Bonhommeau, T. Kachel, H.A. Duerr, J. Werner, G. Behr, A. Koitzsch, R. Huebel, S. Leger, R. Schoenfelder, A.K. Ariffin, R. Manzke, F.M.F. de Groot, J. Fink, H. Eschrig, B. Buechner, M. Knupfer: Electronic structure of LaFeAsO1-xFx from x-ray absorption spectroscopy, Physical Review B 78 (2008) Nr. 22, S. 220502/1-4 URL

A. Lahmar, M. Zriouil, H. Ehrenberg, E. Antic-Fidancev, S. Ganschow, B. Elouadi: Investigation of the cationic distribution within the lattice of a series of niobates with tetragonal tungsten bronze structure, Journal of Electroceramics 21 (2008) Nr. 1-4, S. 719-723

M.H. Lee, K.B. Kim, J.H. Han, J. Eckert, D.J. Sordelet: High strength porous Ti6Al4V foams synthesized by solid state powder processing, Journal of Physics / D 41 (2008) Nr. 10, S. 105404/1-5 URL

K.S. Lee, J. Eckert, Y.W. Chang: EXAFS and dilatometric analysis of structural rearrangement after annealing in a Zr-Based bulk metallic glass, Reviews on Advanced Materials Science 18 (2008) Nr. 1, S. 14-17 URL

M.H. Lee, D.H. Bae, D.H. Kim, W.T. Kim, D. J. Sordelet, B.K. Kim, J. Eckert: Nanocrystallization at shear bands in bulk metallic glass matrix composites, Scripta Materialia 58 (2008) Nr. 8, S. 651-654 URL

X. Li, Y.J. Wei, H. Ehrenberg, F. Du, C.Z. Wang, G. Chen: Characterizations on the structural and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 prepared by a wet-chemical process, Solid State Ionics 178 (2008) Nr. 39-40, S. 1969-1974 URL

N. Mattern, A. Schoeps, U. Kuehn, J. Acker, O. Khvostikova, J. Eckert: Structural behavior of CuxZr100-x metallic glass (x = 35-70), Journal of Non-Crystalline Solids 354 (2008) Nr. 10-11, S. 1054-1060 URL

N. Mattern, M. Zinkevich, W. Loeser, G. Behr, J. Acker: Experimental and thermodynamic assessment of the Nb-Ni-Y system, Journal of Phase Equilibria and Diffusion 29 (2008) Nr. 2, S. 141-155 URL

I. Mazilu, A. Teresiak, J. Werner, G. Behr, C.D. Cao, W. Loeser, J. Eckert, L. Schultz: Phase diagram studies on Er2PdSi3 and ErPd2Si2 intermetallic compounds, Journal of Alloys and Compounds 454 (2008) Nr. 1-2, S. 221-227 URL

D. Mikhailova, H. Ehrenberg, G. Miehe, D. Trots, C. Hess, R. Schneider, H. Fuess: ScRe2O6: A new ternary oxide with metallic ReRe-bonds and a ferromagnetic component above room temperature, Journal of Solid State Chemistry 181 (2008), S. 190-198 URL

K. Nikolowski, N.N. Bramnik, H. Ehrenberg: Two-step process and fatigue in Li x CrMnO4 as positive electrode material for lithium ion batteries, Ionics 14 (2008) Nr. 2, S. 121-124

A. Nilsson, W. Gruner, J. Acker, K. Wetzig: Critical aspects on preparation of Bi-2223 glassy precursor by melt-process, Journal of Non-Crystalline Solids 354 (2008) Nr. 10-11, S. 839-847 URL

L. Nyam-Ochir, H. Ehrenberg, A. Buchsteiner, A. Senyshyn, H. Fuess, D. Sangaa: The magnetic structures of double tungstates, NaM(WO4)2, M=Fe, Cr: Examples for superexchange couplings mediated by [NaO6]-octahedra, Journal of Magnetism and Magnetic Materials 320 (2008) Nr. 18, S. 3251-3255 URL

R.M. Oliveira, M. Ueda, B. Moreno, L. Hoshida, S. Oswald, E. Abramof: A novel process for plasma immersion ion implantation and deposition with ions from vaporization of solid targets, Physica Status Solidi C 5 (2008) Nr. 4, S. 893-896 URL

S. Oswald: Simulation of rough nanostructured surfaces for ARXPS, Surface Science 602 (2008), S. 291-299 URL

S. Oswald, F. Oswald: Modeling of complex surface structures for ARXPS, Surface and Interface Analysis 40 (2008), S. 700-705 URL

S. Oswald, D. Rittrich, W. Zahn: Initial growth of W-based films deposited on Si studied with ARXPS, Surface and Interface Analysis 40 (2008), S. 776-780 URL

J.M. Park, D.H. Kim, K.B. Kim, E. Fleury, M.H. Lee, W.T. Kim, J. Eckert: Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni-Ta bulk glassy alloy via introducing the structural inhomogeneity, Journal of Materials Research 23 (2008) Nr. 11, S. 2984-2989 URL

J.M. Park, D.H. Kim, K.B. Kim, M.H. Lee, W.T. Kim, J. Eckert: Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys, Journal of Materials Research 23 (2008) Nr. 7, S. 2003-2008 URL

J.M. Park, S.W. Sohn, D.H. Kim, K.B. Kim, W.T. Kim, J. Eckert: Propagation of shear bands and accommodation of shear strain in the Fe56Nb4Al40 ultrafine eutectic-dendrite composite, Applied Physics Letters 92 (2008) Nr. 9, S. 91910/1-3 URL

J.M. Park, K.B. Kim, W.T. Kim, M.H. Lee, J. Eckert, D.H. Kim: High strength ultrafine eutectic FeNbAl composites with enhanced plasticity, Intermetallics 16 (2008) Nr. 5, S. 642-650 URL

J.M. Park, T.E. Kim, S.W. Sohn, D.H. Kim, K.B. Kim, W.T. Kim, J. Eckert: High strength NiZr binary ultrafine eutectic-dendrite composite with large plastic deformability, Applied Physics Letters 93 (2008) Nr. 3, S. 31913/1-3 URL

S. Pauly, J. Das, C. Duhamel, J. Eckert: Effect of titanium on microstructure and mechanical properties of Cu50Zr50- x Ti x (2.5 = x = 7.5) glass matrix composites, Metallurgical and Materials Transactions A 39 (2008) Nr. 8, S. 1868-1873

V. Pavlyuk, G. Dmytriv, I. Tarasiuk, H. Pauly, H. Ehrenberg: Li8Cu12+xAl6-x (x = 1.16): a new structure type related to Laves phases, Acta Crystallographica C 64 (2008), S. i15-i17

V. Pavlyuk, G. Dmytriv, I. Tarasiuk, H. Pauly, H. Ehrenberg: Li12Cu16+xAl26x (x = 3.2): a new intermetallic structure type, Acta Crystallographica C 64 (2008), S. i73-i75

N. Qureshi, H. Fuess, H. Ehrenberg, T.C. Hansen, C. Ritter, P. Adelmann, C. Meingast, T. Wolf, Q. Zhang, W. Knafo: The magnetic compositiontemperature phase diagram of the kagome mixed system (CoxNi1-x)3V2O8, Journal of Physics / Condensed Matter 20 (2008) Nr. 9, S. 95219/1-5 URL

N. Qureshi, H. Fuess, H. Ehrenberg, B. Ouladdiaf, J. Rodriguez-Carvajal, T.C. Hansen, T. Wolf, C. Meingast, Q. Zhang, W. Knafo, H. von Loehneysen: Magnetic structure of the kagome mixed compound (Co0.5Ni0.5)3V2O8 , Journal of Physics / Condensed Matter 20 (2008) Nr. 23, S. 235228/1-6 URL

S. Scholz, Q. Huang, M. Thomschke, S. Olthof, P. Sebastian, K. Walzer, K. Leo, S. Oswald, C. Corten, D. Kuckling: Self-doping and partial oxidation of metal-on-organic interfaces for organic semiconductor devices studied by chemical analysis techniques, Journal of Applied Physics 104 (2008) Nr. 10, S. 104502/1-10 URL

B. Schwarz, H. Ehrenberg, H. Weitzel, A. Senyshyn, B. Thybusch, M. Knapp, G.J. McIntyre, H. Fuess: Crystal chemistry, structure and magnetic properties of the Cu(MoxW1-x)O4 solid solution series, Philosophical Magazine 88 (2008) Nr. 8, S. 1235-1258 URL

S. Scudino, D.J. Sordelet, J. Eckert: Devitrification of mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders studied by time-resolved X-ray diffraction, Reviews on Advanced Materials Science 18 (2008) Nr. 2, S. 221-224 URL

S. Scudino, S. Sperling, M. Sakaliyska, C. Thomas, M. Feuerbacher, K.B. Kim, H. Ehrenberg, J. Eckert: Phase transformations in mechanically milled and annealed single-phase beta-Al3Mg2, Acta Materialia 56 (2008) Nr. 5, S. 1136-1143 URL

S. Scudino, M. Sakaliyska, M. Stoica, K.B. Surreddi, F. Ali, G. Vaughan, A.R. Yavari, J. Eckert: In-situ X-ray diffraction of mechanically milled - beta-Al3Mg2 powders, Physica Status Solidi (RRL) - Rapid Research Letters 2 (2008) Nr. 6, S. 272-274 URL

S. Scudino, K.B. Surreddi, S. Sager, M. Sakaliyska, J.S. Kim, W. Loeser, J. Eckert: Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites, Journal of Materials Science 43 (2008) Nr. 13, S. 4518-4526 URL

S. Scudino, S. Venkataraman, M. Sakaliyska, J. Eckert: Crystallization behavior and consolidation of ball milled Zr60Ti5Ag5Cu12.5Ni10Al7.5 glassy powders, Journal of Alloys and Compounds 456 (2008) Nr. 1-2, S. 159-162 URL

S. Scudino, S. Venkataraman, J. Eckert: Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass, Journal of Alloys and Compounds 460 (2008), S. 263-267 URL

M. Spindler, S.B. Menzel, C. Eggs, J. Thomas, T. Gemming, J. Eckert: TEM investigation of Ti and Ti/Al bilayer as alternative diffusion barriers for Cu metallization for SAW device applications, Microelectronic Engineering 85 (2008) Nr. 10, S. 2055-2058 URL

M. Stangl, M. Liptak, A. Fletcher, J. Acker, J. Thomas, H. Wendrock, S. Oswald, K. Wetzig: Influence of initial microstructure and impurities on Cu room-temperature recrystallization (self-annealing), Microelectronic Engineering 85 (2008) Nr. 3, S. 534-541 URL

M. Stangl, M. Militzer: Modeling self-annealing kinetics in electroplated Cu thin films, Journal of Applied Physics 103 (2008) Nr. 11, S. 113521/1-7 URL

N. Van Steenberge, A. Concustell, J. Sort, J. Das, N. Mattern, A. Gebert, S. Surinach, J. Eckert, M.D. Baro: Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing, Materials Science and Engineering A 491 (2008) Nr. 1-2, S. 124-130 URL

M. Stoica, K. Hajlaoui, J. Das, J. Eckert, A.R. Yavari: FeNbB bulk metallic glass with high boron content, Reviews on Advanced Materials Science 18 (2008) Nr. 1, S. 61-65 URL

M. Stoica, J. Das, J. Bednarcik, H. Franz, N. Mattern, W.H. Wang, J. Eckert: Strain distribution in Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass investigated by in situ tensile tests under synchrotron radiation, Journal of Applied Physics 104 (2008) Nr. 1, S. 13522/1-7 URL

D.M. Trots, A. Senyshyn, D.A. Mikhailova, T. Vad, H. Fuess: Phase transitions in jalpaite, Ag3CuS2, Journal of Physics/ Condensed Matter 20 (2008) Nr. 45, S. 455204/1-10 URL

S. Venkataraman, H. Hermann, D.J. Sordelet, J. Eckert: Influence of sub-Tg annealing on the crystallization kinetics of Cu47Ti33Zr11Ni8Si1 metallic glass, Journal of Applied Physics 104 (2008) Nr. 6, S. 66107/1-3 URL

F.-F. Wu, Z.-F. Zhang, B.-L. Shen, S.X.-Y. Mao, J. Eckert: Size effect on shear fracture and fragmentation of a Fe57.6Co14.4B19.2Si4.8Nb4 bulk metallic glass, Advanced Engineering Materials 10 (2008) Nr. 8, S. 727-730

K. Zagorodniy, H. Hermann, M. Taut, G. Seifert, E. Zschech: Structure analysis and property improvements of the computer-simulated fullerene-based ultralow-k dielectrics, Microelectronic Engineering 85 (2008), S. 2118-2122 URL

L.C. Zhang, M. Calin, M. Adam, J. Eckert: Crystallization kinetics and viscosity of Cu47Ti33Zr11Ni8X1 (X=Si, Sn) metallic glasses, Reviews on Advanced Materials Science 18 (2008) Nr. 5, S. 429-432 URL

W.Y. Zhang, B. Yang, M. Stoica, J., Shen, B.G. Shen, J. Eckert: Magnetic hardening mechanism of PrCo5-based ribbons with C addition prepared by melt spinning, International Journal of Materials Research (Zeitschrift fuer Metallkunde) 99 (2008) Nr. 1, S. 67-69

S.-T. Zhang, A.B. Kounga, E. Aulbach, W. Jo, T. Granzow, H. Ehrenberg, J. Roedel: Lead-free piezoceramics with giant strain in the system Bi0.5Na0.5TiO3BaTiO3K0.5Na0.5NbO3. II. Temperature dependent properties, Journal of Applied Physics 103 (2008) Nr. 3, S. 34108/1-7 URL

W.Y. Zhang, M. Stoica, H.W. Chang, M. Calin, R. Schierholz, W.C. Chang, J. Eckert: The role of nonmagnetic phases in improving the magnetic properties of devitrified Pr2Fe14B-based nanocomposites, Materials Science and Engineering B 149 (2008) Nr. 1, S. 73-76 URL

W.Y. Zhang, M. Stoica, J. Eckert, P. Yu, J.Z. Jiang: Preparation of bulk Nd2Fe14B/Fe3B nanocomposite magnets with high rare earth content, Intermetallics 16 (2008) Nr. 3, S. 341-344 URL

W.Y. Zhang, M. Stoica, J. Eckert, H.W. Chang, W.C. Chang, H. Ehrenberg: The role of combined addition of Ti and B in magnetic hardening of devitrified Pr2Fe14B/(Fe3B,-alpha-Fe) nanocomposite magnets, Physica Status Solidi A 205 (2008) Nr. 5, S. 1207-1210 URL

2007

J. Acker, A. Henssge: Chemical analysis of acidic silicon etch solutions: II. Determination of HNO3, HF, and H2SiF6 by ion chromatography, Talanta 72 (2007), S. 1540-1545 URL

T.A. Baser, M. Bostrom, M. Stoica, A.R. Yavari, M. Baricco: Analysis of melting and solidification behaviour of glass-forming alloys by synchrotron radiation, Advanced Engineering Materials 9 (2007) Nr. 6, S. 492-495

S. Baunack, V. Hoffmann, W. Zahn: Quantitative nitrogen analysis by Auger electron spectrometry and glow discharge optical emission spectrometry, Microchimica Acta 156 (2007) Nr. 1-2, S. 69-72 URL

M. Calin, L.C. Zhang, J. Eckert: Tailoring of microstructure and mechanical properties of a Ti-based bulk metallic glass-forming alloy, Scripta Materialia 57 (2007) Nr. 12, S. 1101-1104 URL

A. Concustell, N. Mattern, H. Wendrock, U. Kuehn, A. Gebert, J. Eckert, A.L. Greer, J. Sort, M.D. Baro: Mechanical properties of a two-phase amorphous NiNbY alloy studied by nanoindentation, Scripta Materialia 56 (2007) Nr. 2, S. 85-88 URL

J. Das, F. Ettingshausen, R. Theissmann, W. Loeser, J. Eckert: Microstructure and mechanical properties of Ti-Fe-(Sn) ultrafine eutectic alloys, Transactions of the Indian Institute of Metals 60 (2007) Nr. 2-3, S. 229-233

J. Das, K.B. Kim, W. Xu, W. Loeser, J. Eckert: Formation of ductile ultrafine eutectic structure in TiFeSn alloy, Materials Science and Engineering A 449-451 (2007), S. 737-740 URL

J. Das, S. Pauly, C. Duhamel, B.C. Wei, J. Eckert: Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5, Journal of Materials Research 22 (2007) Nr. 2, S. 326-333 URL

J. Das, K.B. Kim, F. Baier, W. Loeser, A. Gebert, J. Eckert: Bulk ultra-fine eutectic structure in TiFebase alloys, Journal of Alloys and Compounds 434-435 (2007), S. 28-31 URL

J. Das, M. Bostroem, N. Mattern, A. Kvick, A.R. Yavari, A.L. Greer, J. Eckert: Plasticity in bulk metallic glasses investigated via the strain distribution, Physical Review B 76 (2007) Nr. 9, S. 92203/1-4 URL

J. Eckert, J. Das, S. Pauly, C. Duhamel: Processing routes, microstructure and mechanical properties of metallic glasses and their composites, Advanced Engineering Materials 9 (2007) Nr. 6, S. 443-453

J. Eckert, J. Das, G. He, M. Calin, K.B. Kim: Ti-base bulk nanostructure-dendrite composites: Microstructure and deformation, Materials Science and Engineering A 449-451 (2007), S. 24-29 URL

J. Eckert, C. Duhamel, J. Das, K.B. Kim, Z.F. Zhang: Bulk nanostructure - Dendrite composites. solidification, microstructure and mechanical properties, Transactions of the Indian Institute of Metals 60 (2007) Nr. 2-3, S. 331-338

J. Eckert, J. Das, S. Pauly, C. Duamel, K.B. Kim, S. Yi, W.H. Wang: Impact of microstructural inhomogenities on the ductility of bulk metallic glasses, Materials Transactions 48 (2007) Nr. 7, S. 1806-1811

J. Eckert, J. Das, S. Pauly, C. Duhamel: Mechanical properties of bulk metallic glasses and composites, Journal of Materials Research 22 (2007) Nr. 2, S. 285-301 URL

J. Eckert, J. Das, K.B. Kim, F. Baier, W. Loeser, M. Calin, Z.F. Zhang, A. Gebert: Deformation behavior of a Ti66Cu8Ni4.8Sn7.2Nb14 nanostructured composite containing ductile dendrites, Journal of Alloys and Compounds 434-435 (2007), S. 13-17 URL

J. Eckert, J. Das, W. Loeser, S.K. Roy, A. Gebert: Strengthening of multicomponent glass-forming alloys by microstructure design, Journal of Non-Crystalline Solids 353 (2007) Nr. 32-40, S. 3742-3749 URL

N.E.A. El-Gamel, L. Seyfarth, J. Wagler, H. Ehrenberg, M. Schwarz, J. Senker, E. Kroke: The tautomeric forms of cyameluric acid derivatives, Chemistry - A European Journal 13 (2007) Nr. 4, S. 1158-1173

A. Elsner, H. Hermann: Computer simulation and optimization of properties of porous low-k dielectrics, Materials Science - Poland 25 (2007) Nr. 4, S. 1193-1202

W. Gruner, M. Herrmann, A. Nilsson, H. Hermann, W. Haessler, B. Holzapfel: Reactive nanostructured carbon as an effective doping agent for MgB2, Superconductor Science and Technology 20 (2007) Nr. 7, S. 601-606 URL

A. Henssge, J. Acker: Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6, Talanta 73 (2007) Nr. 2, S. 220-226 URL

M. Hentsche, H. Hermann, D. Lindackers, G. Seifert: Microstructure and low-temperature hydrogen storage capacity of ball-milled graphite, International Journal of Hydrogen Energy 32 (2007) Nr. 10-11, S. 1530-1536 URL

H. Hermann, A. Elsner, K. Lochmann, D. Stoyan: Optimisation of multi-component hard sphere liquids with respect to dense packing, Materials Science and Engineering A 449-451 (2007), S. 666-670 URL

H. Hermann, A. Elsner, D. Stoyan: Behavior of icosahedral clusters in computer simulated hard sphere systems, Journal of Non-Crystalline Solids 353 (2007) Nr. 32-40, S. 3693-3697 URL

R. Huebner: Effect of a Ta-Si-N diffusion barrier on the texture formation in thin Cu films, Journal of Applied Physics 101 (2007) Nr. 9, S. 93512/1-6 URL

K.B. Kim, J. Das, F. Baier, J. Eckert: Microstructural investigation of a deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructuredendrite composite, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 106-109 URL

K.B. Kim, J. Das, W. Loeser, M.H. Lee, D.H. Kim, S.K. Roy, J. Eckert: Microstructural comparison of Zr73.5Nb9Cu7Ni1Al9.5 nanostructure-dendrite composites produced by different casting techniques, Materials Science and Engineering A 449-451 (2007), S. 747-751 URL

K.B. Kim, P.J. Warren, B. Cantor, J. Eckert: Devitrification of nano-scale icosahedral phase in multicomponent alloys, Materials Science and Engineering A 449-451 (2007), S. 983-986 URL

U. Kuehn, N. Mattern, T. Gemming, U. Siegel, K. Werniewicz, J. Eckert: Superior mechanical properties of FeCrMoVC, Applied Physics Letters 90 (2007) Nr. 26, S. 261901/1-3 URL

K.S. Lee, J. Eckert, H.-J. Jun, Y.W. Chang: Influence of annealing on structural relaxation, crystallization, and deformation behavior of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass, Journal of Materials Research 22 (2007) Nr. 7, S. 1849-1858 URL

K.S. Lee, J. Eckert, Y.W. Chang: Load relaxation behavior of a Zr41.2Ti13.8Cu12.5Ni10 Be22.5 bulk metallic glass, Journal of Non-Crystalline Solids 353 (2007) Nr. 26, S. 2515-2520 URL

K.S. Lee, H.-J. Jun, D.W. Kim, J. Eckert, Y.W. Chang: Structural relaxation and crystallization of a Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass, Materials Transactions 48 (2007) Nr. 7, S. 1722-1728

N. Mattern, R. Seyrich, L. Wilde, C. Baehtz, M. Knapp, J. Acker: Phase formation of rapidly quenched Cu-Si alloys, Journal of Alloys and Compounds 429 (2007) Nr. 1-2, S. 211-215 URL

N. Mattern, U. Kuehn, A. Gebert, A. Schoeps, T. Gemming, L. Schultz: Phase separation in liquid and amorphous NiNbY alloys, Materials Science and Engineering A 449-451 (2007), S. 207-210 URL

N. Mattern, U. Kuehn, J. Eckert: Structural behavior of amorphous and liquid metallic alloys at elevated temperatures, Journal of Non-Crystalline Solids 353 (2007), S. 3327-3331 URL

N. Mattern, U. Kuehn, A. Concustell, A. Schoeps, M. D. Baro, J. Eckert: Phase separation and crystallization in Cu-Zr metallic glasses, Materials Transactions 48 (2007) Nr. 7, S. 1639-1643

N. Mattern, W.X. Zhang, S. Roth, H Reuther, C. Baehtz, M. Richter: Structural and magnetic properties of non-stoichiometric Fe2Zr, Journal of Physics: Condensed Matter 19 (2007) Nr. 37, S. 376202/1-8 URL

N. Mattern, T. Gemming, G. Goerigk, J. Eckert: Phase separation in amorphous NiNbY alloys, Scripta Materialia 57 (2007) Nr. 1, S. 29-32 URL

N. Mattern: Structure formation in liquid and amorphous metallic alloys, Journal of Non-Crystalline Solids 353 (2007) Nr. 18-21, S. 1723-1731 URL

N. Mattern, W. Loeser, J. Eckert: Influence of cooling rate on crystallization and microstructure of the monotectic Ni54Nb23Y23 alloy, Philosophical Magazine Letters 87 (2007) Nr. 11, S. 839-846

S. Menzel, D. Reitz, H. Schmidt, M. Albert: Oberflaechenwellen - Strukturen in Cu-Damaszentechnologie, Vakuum in Forschung und Praxis 19 (2007) Nr. 4, S. 29-33 URL

R. Mueller, M. Bobeth, H. Brumm, G. Gille, W. Pompe, J. Thomas: Kinetics of nanoscale structure development during Mg-vapour reduction of tantalum oxide, International Journal of Materials Research (Zeitschrift fuer Metallkunde) 98 (2007) Nr. 11, S. 1138-1145

A. Nilsson, W. Gruner, J. Acker, K. Wetzig: Glass-ceramic route of BSCCO superconductors fabrication of amorphous precursor, Physica C 460-462 (2007), S. 1331-1332 URL

S. Oswald, F. Oswald: Modeling of surface roughness for ARXPS, Physica Status Solidi C 4 (2007) Nr. 6, S. 1817-1821 URL

S. Oswald, K. Knoth, B. Holzapfel: XPS depth profiling investigations on La2Zr2O7 layers prepared by chemical solution deposition, Microchimica Acta 156 (2007) Nr. 1-2, S. 121-124 URL

S. Pauly, J. Das, C. Duhamel, J. Eckert: Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite, Advanced Engineering Materials 9 (2007) Nr. 6, S. 487-491

V.V. Pavlyuk, G.S. Dmytriv, I.I. Tarasiuk, H. Pauly, H. Ehrenberg: The ternary indide Li278(In,Ag)154: A new n = 6 variant of cubic n x n x n W-type superstructures, Intermetallics 15 (2007) Nr. 11, S. 1409-1415 URL

R. Peipmann, J. Thomas, A. Bund: Electrocodeposition of nickelalumina nanocomposite films under the influence of static magnetic fields, Electrochimica Acta 52 (2007) Nr. 19, S. 5808-5814 URL

D. Reitz, J. Thomas, H. Schmidt, S. Menzel, K. Wetzig, M. Albert, J.W. Bartha: Damascene technique applied to surface acoustic wave devices, Journal of Vacuum Science and Technology B 25 (2007) Nr. 1, S. 271-276 URL

T. Riedl, T. Gemming, W. Gruner, J. Acker, K. Wetzig: Determination of manganese valency in La1-xSrxMnO3 using ELNES in the (S)TEM, Micron 38 (2007), S. 224-230 URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz: Effect of Zr on the crystallization behavior of multi-component Zr-based metallic glasses, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 217-220 URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz: Influence of oxygen on the devitrification of ZrTiNbCuNiAl metallic glasses, Materials Science and Engineering A 449-451 (2007), S. 493-496 URL

S. Scudino, J. Eckert, X.Y. Yang, D.J. Sordelet, L. Schultz: Conditions for quasicrystal formation from mechanically alloyed Zr-based glassy powders, Intermetallics 15 (2007) Nr. 4, S. 571-582 URL

A. Senyshyn, W. Schnelle, L. Vasylechko, H. Ehrenberg, M. Berkowski: Crystalline electric field and lattice contributions to thermodynamic properties of PrGaO3: specific heat and thermal expansion, Journal of Physics: Condensed Matter 19 (2007) Nr. 15, S. 156214/1-8 URL

M. Stangl, A. Fletcher, J. Acker, H. Wendrock, K. Wetzig: Influence of Ta-based diffusion barriers on the microstructure of copper thin films, Journal of Electronic Materials 36 (2007) Nr. 12, S. 1625-1629

M. Stangl, J. Acker, S. Oswald, M. Uhlemann, T. Gemming, S. Baunack, K. Wetzig: Incorporation of sulfur, chlorine, and carbon into electroplated Cu thin films, Microelectronic Engineering 84 (2007) Nr. 1, S. 54-59 URL

M. Stangl, J. Acker, V. Hoffmann, W. Gruner, K. Wetzig: Segregation of organic impurities in thin electroplated Cu metallizations, Microchimica Acta 156 (2007) Nr. 1-2, S. 159-162 URL

N. Van Steenberge, J. Sort, A. Concustell, J. Das, S. Scudino, S. Surinach, J. Eckert, M.D. Baro: Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy, Scripta Materialia 56 (2007) Nr. 7, S. 605-608 URL

M. Steinert, J. Acker, S. Oswald, K. Wetzig: Study on the mechanism of silicon etching in HNO3-Rich HF/HNO3 mixtures, The Journal of Physical Chemistry C 111 (2007) Nr. 5, S. 2133-2140 URL

M. Stoica, J. Eckert, S. Roth, A.R. Yavari, L. Schultz: Fe65.5Cr4Mo4Ga4P12C5B5.5 BMGs: Sample preparation, thermal stability and mechanical properties, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 171-175 URL

S. Strehle, R. Reiche, V. Hoffmann, J. Acker, T. Gemming, K. Wetzig: Sulfur incorporation in electroplated Cu(Ag) thin films, Microchimica Acta 156 (2007) Nr. 1-2, S. 167-172 URL

J. Thomas: Nanotechnology a challenge for solid state analysis, Microchimica Acta 156 (2007) Nr. 1-2, S. 3-8 URL

S. Venkataraman, J. Eckert, L. Schultz, D.J. Sordelet: Studies on the crystallization kinetics of Cu-reinforced partially crystalline Cu47Ti33Zr11Ni8Si1 metallic glass composite, Journal of Alloys and Compounds 434-435 (2007) Nr. 1-2, S. 203-206 URL

S. Venkataraman, H. Hermann, C. Mickel, L. Schultz, D.J. Sordelet, J. Eckert: Calorimetric study of the crystallization kinetics of Cu47Ti33Zr11Ni8Si1 metallic glass, Physical Review B 75 (2007) Nr. 10, S. 104206/1-9 URL

S. Venkataraman, B. Bartusch, C. Mickel, K.B. Kim, J. Das, S. Scudino, M. Stoica, D.J. Sordelet, J. Eckert: Metallic glass formation in the Cu47Ti33Zr11Ni8Si1 alloy, Materials Science and Engineering A 444 (2007) Nr. 1-2, S. 257-264 URL

V.S. Vidyarthi, W.-M. Lin, G. Suchaneck, G. Gerlach, C. Thiele, V. Hoffmann: Plasma emission controlled multi-target reactive sputtering for in-situ crystallized Pb(Zr,Ti)O3 thin films on 6" Si-wafers, Thin Solid Films 515 (2007) Nr. 7-8, S. 3547-3553 URL

M. Voronov, V. Hoffmann: Secondary discharge in fast flow Grimm-type microsecond pulsed glow discharge source for mass spectrometry, Journal of Analytical Atomic Spectrometry 22 (2007), S. 1184-1188 URL

B.C. Wei, L.C. Zhang, T.H. Zhang, D.M. Xing, J. Das, J. Eckert: Strain rate dependence of plastic flow in Ce-based bulk metallic glass during nanoindentation, Journal of Materials Research 22 (2007) Nr. 2, S. 258-263 URL

Y.J. Wei, H. Ehrenberg, N.N. Bramnik, K. Nikolowski, C. Baehtz, H. Fuess: In situ synchrotron diffraction study of high temperature prepared orthorhombic LiMnO2, Solid State Ionics 178 (2007) Nr. 3-4, S. 253-257 URL

W. Weinreich, J. Acker, I. Graeber: Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods, Talanta 71 (2007) Nr. 5, S. 1901-1905 URL

K. Werniewicz, U. Kuehn, N. Mattern, B. Bartusch, J. Eckert, J. Das, L. Schultz, T. Kulik: New Fe-Cr-Mo-Ga-C composites with high compressive strength and large plasticity, Acta Materialia 55 (2007) Nr. 10, S. 3513-3520 URL

K. Wetzig: Modern methods of analytical thin layer characterization, Acta Metallurgica Slovaca 13 (2007), S. 38-47

L. Wilken, V. Hoffmann, K. Wetzig: Electrical measurements at radio frequency glow discharges for spectroscopy, Spectrochimica Acta B 62 (2007) Nr. 10, S. 1085-1122 URL

A.R. Yavari, J.J. Lewandowski, J. Eckert: Mechanical properties of bulk metallic glasses, MRS Bulletin 32 (2007) Nr. 8, S. 635-638

P. Yu, L.C. Zhang, W.Y. Zhang, J. Das, K.B. Kim, J. Eckert: Interfacial reaction during the fabrication of Ni60Nb40 metallic glass particles-reinforced Al based MMCs, Materials Science and Engineering A 444 (2007) Nr. 1-2, S. 206-213 URL

P. Yu, S. Venkataraman, J. Das, L. Zhang, W. Zhang, J. Eckert: Effect of high pressure during the fabrication on the thermal and mechanical properties of amorphous Ni60Nb40 particle-reinforced Al-based metal matrix composites, Journal of Materials Research 22 (2007) Nr. 5, S. 1168-1173 URL

K. Zagorodniy, H. Hermann, M. Taut: Molecular design of ultralow-k insulator materials, Materials Science - Poland 25 (2007) Nr. 4, S. 1203-1211

K. Zagorodniy, H. Hermann, M. Taut: Structure and properties of computer-simulated fullerene-based ultralow-k dielectric materials, Physical Review B 75 (2007) Nr. 24, S. 245430/1-6 URL

W. Zahn, S. Oswald, A. Fuelle, D. Hildebrand, M. Zier, K. Wetzig: Growth studies of Ta-based films on Si with STM and XPS, Physica Status Solidi C 4 (2007) Nr. 6, S. 1830-1835 URL

W.Y. Zhang, C.H. Chiu, L.C. Zhang, K. Biswas, H. Ehrenberg, W.C. Chang, J. Eckert: Complete suppression of metastable phase and significant enhancement of magnetic properties of B-rich PrFeB nanocomposites prepared by devitrifying amorphous ribbons, Journal of Magnetism and Magnetic Materials 308 (2007), S. 24-27 URL

Z.-F. Zhang, J. Eckert: The physical nature of materials strengths, Advanced Engineering Materials 9 (2007) Nr. 3, S. 143-146

X.F. Zhang, K.B. Kim, J. Das, S. Yi, J. Eckert: Influence of additional elements on the development of nanoscale heterogeneities in (TiCu)-based bulk metallic glasses with enhanced ductility, Journal of Materials Research 22 (2007) Nr. 8, S. 2223-2229 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation behavior and plastic instability of off-stoichiometric CoFe alloys, Scripta Materialia 57 (2007) Nr. 8, S. 731-734 URL

L.-C. Zhang, H.-B. Lu, C. Mickel, J. Eckert: Ductile ultrafine-grained Ti-based alloys with high yield strength, Applied Physics Letters 91 (2007) Nr. 5, S. 51906/1-3 URL

S.-T. Zhang, A.B. Kounga, E. Aulbach, H. Ehrenberg, J. Roedel: Giant strain in lead-free piezoceramics Bi0.5Na0.5TiO3BaTiO3K0.5Na0.5NbO3 system, Applied Physics Letters 91 (2007) Nr. 11, S. 112906/1-3 URL

L.-C. Zhang, M. Calin, F. Paturaud, C. Mickel, J. Eckert: Deformation-induced nanoscale high-temperature phase separation in CoFe alloys at room temperature, Applied Physics Letters 90 (2007) Nr. 20, S. 201908/1-3 URL

L.C. Zhang, M. Calin, M. Branzei, L. Schultz, J. Eckert: Phase stability and consolidation of glassy/nanostructured Al85Ni9Nd4Co2 alloys, Journal of Materials Research 22 (2007) Nr. 5, S. 1145-1155 URL

L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin, J. Eckert: High strength TiFeSn ultrafine composites with large plasticity, Scripta Materialia 57 (2007) Nr. 2, S. 101-104 URL

M. Zier, S. Oswald, R. Reiche, K. Wetzig: Non-destructive depth profile analysis using synchrotron radiation excited XPS, Microchimica Acta 156 (2007) Nr. 1-2, S. 99-101 URL

Contributions to collected editions/proceedings

2014

S. Doerfler, K. Pinkert, A. Meyer, M. Weiser, H. Althues, L. Giebeler, M. Schneider, J. Eckert, A. Michaelis, E. Beyer, S. Kaskel: Highly porous carbon electrodes for energy storage and conversion application, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 427 (2014)

L. Giebeler, F. Thoss, I. Lindemann, C. Bonatto Minella, B. Boehme, S. Peters, M. Baitinger, J. Grin, J. Eckert, L. Schultz: Solid state hydrogen storage materials and metallic anodes for mobile and stationary applications, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 385 (2014)

T. Marr, J. Romberg, J. Freudenberger, J. Scharnweber, A. Eschke, C.-G. Oertel, I. Okulov, R. Petters, U. Kuehn, J. Eckert, L. Schultz, W. Skrotzki: Feines Gefuege, fester Werkstoff, International ECEMP Colloquium 2013, Dresden, 25.-26.10.13, in: ECEMP-European Centre for Emerging Materials and Processes Dresden - Ressourcenschonende Werkstoffe - Technologien - Prozesse, Verl. Wissenschaftliche Scripten, 375 (2014)

K. Schulz, D. Ernst, S. Menzel, T. Gemming, J. Eckert, K.-J. Wolter: Thermosonic platinum wire bonding on platinum, 37th International Spring Seminar on Electronics Technology (ISSE), Dresden/ Germany, 7.-11.5.14, in: Proceedings, 120-124 (2014)

K. Schulz, D. Ernst, S. Menzel, J., Wolter, K.-J. Eckert: Thermosonic Platinum wire bonding on Platinum, 37th International Spring Seminar on Electronics Technology, Advances in Electronic System Integration, Dresden/ Germany, 7.-11.5.14, in: Proceedings, 64-65 (2014)

A.H. Taghvaei, M. Stoica, K. Janghorban, J. Eckert: Ball milling-induced nanocrystallization of Co40Fe22Ta8B30 metallic glass with high thermal stability and good soft magnetic properties, 5th International Conference on Nanostructures (ICNS5), Institute for Nanoscience and Nanotechnology (INST), Sharif University of Technology, Tehran/ Islamic Republic of Iran, 6.-9.3.14, in: Proceedings (Hrsg. M. Reza Ejtehadi), Part 2, 974 (2014)

J. Zhao, Q. Deng, S.M. Avdoshenkoe, L. Fu, J. Eckert, M.H. Ruemmeli: Direct in situ observations of single Fe atom catalytic processes and anomalous diffusion at graphene edges, in: PNAS, 111, 15641-15646 (2014)

2013

J. Tan, C.J. Li, Y.H. Jiang, R. Zhou, J. Eckert: Correlation between internal states and strength in bulk metallic glasses, Pacific Rim International Congress on Advanced Materials and Processing (PRICM-8), Waikaloa, Hawaii/ USA, 4.-9.8.13, in: Proceedings, Fernand Marquis (Ed.), 3199 (2013)

X. Wang, S. Scudino, J. Eckert: Production and characterization of Al 2024 matrix composites reinforced with beta-Al3Mg2 complex metallic alloy particles, Materials Research Society Symposium, in: MRS Proceedings, 1517, 1-11 (2013)

S. Wei, F. Yang, J. Bednarcik, I. Kaban, O. Shuleshova, A. Meyer, R. Busch: Two liquid states in a strong metallic glass-former, in: Photon Science 2013: Highlights and Annual Report, Deutsches Elektronen-Synchrotron DESY, Hamburg, 56-57 (2013)

S. Wei, F. Yang, J. Bednarcik, I. Kaban, A. Meyer, R. Busch: Polyamorphous transformation in bulk metallic glassforming liquid and its implication to strong liquids, in: AIP Conference Proceedings, 1518, 260-265 (2013) URL

2012

B. Boehme, Y. Liang, F. Thoss, L. Giebeler, H. Ehrenberg, M. Baitinger, J. Eckert, Y. Grin: Lithium in clathrates, ECEMP- European Centre for Emerging Materials and Processes Dresden - Neue Werkstoffe und Technologien fuer nachhaltige Produkte und Prozesse, Dresden, 25.-26.10.12, in: Proceedings, International ECEMP Colloquium 2012, W. Hufenbach, M. Gude (eds.), 228-239 (2012)

J.S. Kim, M.H. Lee, D.H. Kim, U. Kuehn, J. Eckert: Synthesis of functional porous metallic material from metallic glass composites precursor by powder metallurgy route, European Congress on Advanced Materials and Processes (EUROMAT 2011), Symposium C13- Metallic Glasses and Related Composites: New Routes for Functional and Strong Materials, (M. Stoica and K. Georgarakis, eds.) Montpellier/ Frankreich, 12.-15.9.11, in: Revue de Metallurgie, 109, 11- (2012)

I. Okulov, U. Kuehn, J. Eckert, T. Marr, J. Freudenberger, L. Schultz, J. Scharnweber, C.-G. Oertel, W. Skrotzki: Duktile multikomponentige Titanlegierungen, ECEMP-European Centre for Emerging Materials and Processes Dresden - Neue Werkstoffe und Technologien fuer nachhaltige Produkte und Prozesse, Dresden, 25.-26.10.12, in: Proceedings, International ECEMP Colloquium 2012, W. Hufenbach, M. Gude (eds.), 96-107 (2012)

S. Oswald: X-ray photoelectron spectroscopy in analysis of surfaces, in: Encyclopedia of Analytical Chemistry, R.A. Meyers (Ed), John Wiley and Sons Ltd, Chichester, UK, 10, 9320-9353 (2012)

K.G. Prashanth, K.B. Surreddi, S. Scudino, M. Samadi Khoshkhoo, Z. Wang, D.J. Sordelet, J. Eckert: Powder metallurgy of high strength Al90.4 Y4.4 Ni4.3 Co0.9 gas-atomized powder, International Conference on Aluminium Alloys (ICAA 13), Pittsburgh/ USA, 3.-7.6.12, in: Proceedings, H. Weiland; A.D. Rollett; W.A. Cassada (eds.), 1017 (2012)

2011

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales: Mechanical engineering properties of CMAs, in: Complex Metallic Alloys : Fundamentals and Applications, Dubois, Jean-Marie (ed.), Weinheim : Wiley-VCH-Verl., 273-316 (2011)

V. Hoffmann, A. Quentmeier: Glow discharge optical emission spectroscopy (GD-OES), in: Surface and Thin Film Analysis: A Compendium of Principles, Instrumentation, and Applications. G. Friedbacher, H. Bubert (eds.), 2. compl. rev. and enl. Ed. 2011, Weinheim: Wiley-VCH, 534 S., 329-342 (2011)

V. Hoffmann, D. Klemm, V. Efimova, C. Venzago, A.A. Rockett, T. Wirth, T. Nunney, C.A. Kaufmann, R. Caballo: Elemental distribution profiling of thin films for solar cells, in: Advanced Characterization Techniques for Thin Film Solar Cells, Daniel Abou-Ras, Thomas Kirchartz, Uwe Rau (eds.) Weinheim: Wiley-VCH, 2011, Capter 16, 411-448 (2011)

I. Kaban, P. Jovari, T. Petkova, P. Petkov, A. Stoilova, B. Beuneu, W. Hoyer, N. Mattern, J. Eckert: Atomic structure of (Ge0.2Se0.8)85B15 and (Ge0.2Se0.8)85In15 glasses, in: Nanotechnological Basis for Advanced Sensors, Series: NATO Science for Peace and Security Series B: Physics and Biophysics, Reithmaier, J.P.; Paunovic, P.; Kulisch, W.; Popov, C.; Petkov, P. (eds.), Dordrecht: Springer Netherlands, 2011, Part 6, 545- (2011)

I. Kaban, P. Jovari, T. Petkova, P. Petkov, A. Stoilova, B. Beuneu, B. Hoyer, N. Mattern, J. Eckert: Atomic structure of (Ge0.2Se0.8)85B15 and (Ge0.2Se0.8) 85In15 glasses, NATO Summer School on Nanotechnological Basis for Advanced Sensors, Sozopol/ Bulgarien, 30.5.-11.6.10, in: Nanotechnological Basis for Advanced Sensors, Johann Peter Reithmaier, Perica Paunovic, Wilhelm Kulisch, Cyril Popov, Plamen Petkov (eds.), NATO Science for Peace and Security Series B: Physics and Biophysics, Part 6, Dordrecht: Springer., 195-202 (2011)

L. Loeber, D. Klemm, U. Kuehn, J. Eckert: Rapid manufacturing of cellular structures of steel or titaniumaluminide, in: Light Metals Technology V, H. Dieringa, N. Hort, K.U. Kainer (eds.), Materials Science Forum, 690, 103- (2011)

S. Scudino, J. Eckert: Nanocrystalline metals and alloys prepared by mechanical attrition, in: Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. S. H. Whang (ed.) Cambridge: Woodhead Publ., 2011, Capter 3, 59-84 (2011)

L.C. Zhang, M. Calin, J. Eckert: High-strength titanium base alloys with multiple length-scale microstructure, in: Advances in Mechanical Engineering Research, Vol. 2, David E. Malach (ed.), Nova Science Publishers 2011, 233-251 (2011)

2010

B. Boehme, F. Thoss, M. Rosenburg, I. Chumak, L. Giebeler, M. Baitinger, M. Hinterstein, A. Bell, H. Ehrenberg, J. Eckert, Y. Grin: In-situ investigation on the electrochemical reaction of Li with Ge(cF136), in: DESY- Annual Report, 1257-1258 (2010)

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales: Mechanical engineering properties of CMAs, in: Complex Metallic Alloys: Fundamentals and Applications, Dubois, Jean-Marie ; Belin-Ferre, Esther (Ed.), Weinheim: Wiley-VCH, 273-315 (2010)

H. Hermann: Optimization of dielectric and elastic properties of nanoporous ultralow-k dielectric materials, in: AIP Conference Proceedings, 1300, 153-158 (2010)

M.H. Lee, J.H. Jun, J. Eckert: Effect of residual stress on mechanical property of monolithic bulk metallic glasses, 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns/ Australia, 1.-5.8.10, in: Proceedings, J.-F. Nie, A. Morton (eds.), Materials Science Forum, 654-656, 1050 (2010)

N. Mattern, J. Eckert: Short-range order of Cu-Zr metallic glasses, 2009 WPI-AIMR Annual Workshop, Miyagi-Zao/ Japan, 1.-6.3.09, in: Proceedings, WPI-AIMR News 10, 10, 104-110 (2010)

M. Spindler, S.B. Menzel, J. Eckert, C. Eggs: Influence of Al on resistance and power durability of Cu-based SAW metallizations, E-MRS Spring Meeting, Symposium G, Strasbourg/ France, 8.-12.6.09, in: Proceedings: Fundamentals and Technology of Multifunctional Oxide Thin Films; P. Muralt, M. Kosec, V. Raineri, S. Ravesi (eds.), IOP Publ. Ltd., London. IOP Conf. Series: Materials Science and Engineering, 8, 12013/1-3 (2010)

K. Wetzig: Oberflaechen- und Duennschichtcharakterisierung, in: Vakuum - Plasma - Technologie, G. Blasek ; G. Braeuer (eds.), Bad Saulgau: E. G. Leuze-Verl., 2010, Band 1, 139-186 (2010)

W. Xu, M. Calin, K.B. Kim, J. Das, K. Xia, J. Eckert: Microscopic deformation behavior and microstructural evolution in Ti-Nb-Ta-M (M = In, Ag, or Cr) beta- alloys, 2009 WPI-AIMR Annual Workshop, Miyagi-Zao/ Japan, 1.-6.3.09, in: Proceedings, WPI-AIMR News 10, 10, 111-114 (2010)

2009

S. Gorantla, F. Boerrnert, A. Bachmatiuk, R. Schoenfelder, M.H. Ruemmeli, B. Buechner, T. Gemming, J. Eckert: HRTEM Imaging of Electron Beam Irradiation Defect Dynamics in SWCNTs at 80 kV, Microscopy Conference 2009 (MC2009), Graz/ Oesterreich, 30.8.-4.9.09, in: Proceedings, W. Grogger, F. Hofer, P. Poelt (eds.) Verlag der TU Graz/ Oesterreich., Vol. 3, 141-142 (2009)

R. Mueller, M. Bobeth, H. Brumm, G. Gille, W. Pompe, J. Thomas: Formation of nanostructured tantalum during Mg-vapour reduction of tantalum oxide, International Conference on Advanced Processing for Novel Functional Materials - APNFM 2008, Dresden, 23.-25.1.08, in: Proceedings, Y. Grin, B. Kieback, J. Schmidt (eds.), 85-90 (2009)

M. Sakaliyska, S. Scudino, H.V. Nguyen, K.B. Surreddi, B. Bartusch, F. Ali, J.-S. Kim, J. Eckert: Consolidation and mechanical properties of mechanically alloyed Al-Mg powders, Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, MRS Symposium 2009, Warrendale/ USA, in: MRS Symposium Proceedings, M. Palm ; B.P. Bewlay ; M. Takeyama ; J.M.K. Wiezorek ; Y.-H. He (eds), 1128, U05-46 (2009)

M. Stoica, S. Roth, J. Eckert, G. Vaughan: Glass-forming Fe-based alloys purified by fluxing techniques, International Conference on Advanced Processing for Novel Functional Materials - APNFM 2008, Dresden, 23.-25.1.08, in: Proceedings, Y. Grin, B. Kieback, J. Schmidt (eds.), 471-475 (2009)

J. Thomas, J. Schumann, T. Gemming, J. Eckert: TEM investigation of electron beam evaporated epitaxial Fe3Si films on GaAs (100) substrates, Microscopy Conference 2009 (MC2009), Graz/ Oesterreich, 30.8.-4.9.09, in: Proceedings, W. Grogger, F. Hofer, P. Poelt (eds.) Verlag der TU Graz/ Oesterreich (2009)

A. Winkler, S. Menzel, H. Schmidt: SAW-grade SiO2 for advanced microfluidic devices, in: Proceedings of SPIE, 7362, 73621Q (2009)

2008

C. Duhamel, S. Venkataraman, S. Scudino, J. Eckert: Diffusionless transformations, in: Basics of Thermodynamics and Phase Transitions in Complex Intermetallics, Book Series on Complex Metallic Alloys, E. Bellin-Ferre (ed.), Singapur: World Scientific Publisher, 2008, Vol. 1, 119-146 (2008)

C. Edelmann, D. Klemm, V. Hoffmann: Evaluierung der Abpumpkurven einer Glimmentladungsquelle: Qualitaetskontrolle von Spektralanalysen, in: Transfer. Das Steinbeis Magazin, 9 (2008)

H. Hermann, A. Elsner, V. Kokotin: Computational optimization of multicomponent bernal`s liquids, in: Phase Transformations in Multicomponent Melts, D. M. Herlach (Ed), Weinheim: Wiley-VCH, 2008, 171-183 (2008)

K.S. Lee, H.-J. Jun, Y.W. Chang, J. Eckert, J.H. Lee: High temperature deformation and formability of Cu47.5Zr47.5Al5 bulk metallic glass, International Conference on Technology of Plasticity, Gyeongju/ Sued-Korea, 7.-11.9.08, in: Proceedings. Seoul: The Korean Society for Technology of Plasticity, CD-ROM, 570 (2008)

P. Matteis, P. Russo Spena, C. Pozzi, D. Firrao, T.A. Baser, M. Baricco, J. Eckert, L. Battezzati: Fracture of Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasss, 17th European Conference on Fracture (ECF 17). Multilevel Approach to Fracture of Materials, Components and Structures, in: Proceedings, J. Pokluda, P. Lukas, P. Sandera, I. Dlouhy (eds.) VUTIUM Brno/ Tschechische Republik; CD-ROM, 1717 (2008)

O. Perroud, A. Wiedemann, M. Stoica, J. Eckert: Nanosized megnetization density profiles in hard magnetic Nd-Fe-Co-Al-glasses, in: Phase Transformations in Multicomponent Melts, D. M. Herlach (ed), Weinheim: Wiley-VCH, 2008, 263-276 (2008)

M. Stangl, M. Liptak, V. Hoffmann, K. Wetzig, J. Acker: Thermoelektrische Schaedigungsmechanismen an elektrochemisch abgeschiedenen Kupfer-Damaszen-Leitbahnen, in: Jahrbuch Oberflaechentechnik; Richard Suchentrunk (ed.) ; Leuze-Verl.; 2008, 64, 287-292 (2008)

M. Stangl, J. Acker, V. Hoffmann, K. Wetzig, U. Kuenzelmann, J.W. Bartha: Application of the copper damascene process for the preparation of electromigration test structures, in: Proceedings, ICPT, Berlin: VDE-Verl., 2008, 331-335 (2008)

M. Stoica, S. Roth, J. Eckert, G. Vaughan: Crystallization behavior and magnetic properties of Fe-Based bulk metallic glasses, in: Intermetallics Research Progress, Y.N. Berdovsky (ed.) Hauppauge: Nova Science Publisher, 2008, 261-277 (2008)

M. Stoica, G. Kumar, M. Emmi, O. Perroud, A. Wiedemann, A. Gebert, S. Ram, L. Schultz, J. Eckert: Microstructure and magnetic properties of rapidly quenched (Nd100-xGax)80Fe20 (x = 0, 5, 10, 15 at.%) alloys, in: Phase Transformations in Multicomponent Melts, D. M. Herlach (ed.), Weinheim: Wiley-VCH, 2008, 277-295 (2008)

K. Werniewicz, U. Kuehn, N. Mattern, B. Bartusch, J. Eckert, U. Siegel, L. Schultz, T. Kulik: Fe-Based composite materials with improved mechanical properties, in: Glass Materials Research Progres, J.C. Wolf; L. Lange (eds.), Hauppauge: Nova Science Publisher, 2008, 259-274 (2008)

2007

Proceedings Microscopy Conference MC 2007, Microscopy Conference, Deutsche Gesellschaft fuer Elektronenmikroskopie, 33rd Conference, Saarbruecken, 2.-7.9.07, in: Microscopy and Microanalysis, T. Gemming; U. Hartmann; P. Mestres; P. Walter (eds.), 13, 467 S. (2007)

J. Eckert, S. Scudino: Crystallization of metallic glasses, in: Materials Processing Handbook, J.R.Groza ; J.F. Schackelford ; E.J. Lavernia M.T. Powers (eds.)Taylor and Francis, 2007, 6/1-27 (2007)

A. Rother, T. Gemming, H. Lichte: The statistics of the thermal motion of the atoms in TEM imaging, Microscopy Conference, Deutsche Gesellschaft fuer Elektronenmikroskopie, 33rd Conference, Saarbruecken, 2.-7.9.07, in: Microscopy and Microanalysis, T. Gemming; U. Hartmann; P. Mestres; P. Walter (eds.), 13, Suppl. 3, 26-27 (2007)

J. Thomas, H. Wendrock, B. Arnold, D. Lohse: FIB preparation of holes with large aspect ratio, Microscopy Conference, Deutsche Gesellschaft fuer Elektronenmikroskopie, 33rd Conference, Saarbruecken, 2.-7.9.07, in: Microscopy and Microanalysis, T. Gemming; U. Hartmann; P. Mestres; P. Walter (eds.), 13, Suppl. 3, 104-105 (2007)

J. Thomas, T. Gemming: Determination of phase mixtures by selected area electron diffraction, Microscopy Conference, Deutsche Gesellschaft fuer Elektronenmikroskopie, 33rd Conference, Saarbruecken, 2.-7.9.07, in: Microscopy and Microanalysis, T. Gemming; U. Hartmann; P. Mestres; P. Walter (eds.), 13, Suppl. 3, 134-135 (2007)

K. Zagorodniy, H. Hermann, M. Taut, Y. Wang, G. Seifert, E. Zschech: Structure and physical properties of computer-simulated fullerene-based ultralow k dielectric materials, in: Stress-induced Phenomena in Metallization, AIP Conference Proceedings, 945, 162-169 (2007)

K. Zagorodniy, H. Hermann, M. Taut, Y. Wang, G. Seifert, E. Zschech: Structure and physical properties of computer-simulated fullerene-based ultralow-k dielectric materials, in: AIP Conference Proceedings, 945, 162 (2007)

Invited talks

2015

M. Boenisch, A. Panigrahi, M. Calin, F. Senftleben, M. Stoica, M. Zehetbauer, T. Waitz, W. Skrotzki, J. Eckert: Selected aspects relating to the martensitic transformations in Ti-Nb alloys, BioTiNet Workshop, Universitaet Wien, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Ti-based glassy alloys as prospective biomaterials, Workshop BioTiNet, University of Vienna, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, M. Boenisch, A. Helth, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel Ti-Based Metastable Alloys for Biomedical Applications, The 9th International Conference on Materials Science & Engineering - Bramat 2015, Brasov/ Romania, 5.-7.3.15 (2015)

A. Gebert, S. Horn, R. Sueptitz, P.F. Gostin, M. Stoica, J. Eckert, M. Uhlemann: Electrochemical micromachining of bulk metallic glasses, 227th Electrochemical Society Meeting (ECS), Chicago/ USA, 25.-28.5.15 (2015)

A. Gebert: A straight-forward route for recycling of Nd from Nd-Fe-B magnets based on melt extraction, MCARE 2015, Jeju/ Korea, 23.-27.2.15 (2015)

A. Gebert, S. Horn, R. Sueptitz, M. Stoica, J. Eckert, M. Uhlemann: Electrochemical micromachining of passive Fe-based bulk metallic glasses, TMS Annual Meeting 2015, Orlando/ USA, 15.-19.3.15 (2015)

D. Geissler, J. Freudenberger, A. Kauffmann, S. Martin, D. Rafaja: Eine kritische Auseinandersetzung mit der gegenwaertigen thermodynamischen Beschreibung der Stapelfehlerenergie, 36. Adelbodener Werkstoffseminar des Instituts fuer Angewandte Materialien - Werkstoffkunde (IAM-WK), Karlsruher Institut fuer Technologie (KIT), Adelboden/ Schweiz, 7.-14.3.15 (2015)

S. Menzel: Migration processes in structured thin films, Workshop Morphologie und Mikrostruktur Duenner Schichten und deren Beeinflussung, Dresden EFDS/FhG-IWS, Dresden, 12.3.15 (2015)

A. Winkler: Einfuehrung in die akustoelektronische Mikrofluidik, Einzelvorlesung im Rahmen der Vorlesung Mikrobiologie der TU Dresden (ILBT), TU Dresden, Institut fuer Lebensmittel und Bioverfahrenstechnik, Dresden, 5.2.15 (2015)

2014

M. Boenisch, M. Calin, A. Panigrahi, T. Waitz, M. Zehetbauer, A. Helth, A. Gebert, L. Giebeler, J. van Humbeeck, W. Skrotzki, J. Eckert: Displacive and diffusional phase transformations in Ti-Nb alloys, Seminar, Forschungsgruppe Physik funktioneller Materialien, Universitaet Wien, Wien/ Oesterreich, 10.3.14 (2014)

M. Calin, N. Zheng, S. Abdi, M. Boenisch, A. Helth, M.D. Baro, F.P. Gostin, A. Gebert, J. Eckert: Design of biocompatible Ti-based amorphous alloys for implant applications, The 15th International Conference of Rapidly Quenched & Metastable Materials (RQ 15 ), Shanghai/ China, 24.-28.8.14 (2014)

M. Calin: Novel Ti-based materials for biomedical applications, Colloquim - Materials Science and Engineering Faculty, University "Politehnica" Bucharest, Bucharest/ Romania, 9.4.14 (2014)

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, N. Zheng, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel metastable Ti-based structures for orthopedic applications, Internation Conference ROMAT 2014, Bukarest/ Rumaenien, 15.-17.10.14 (2014)

M. Calin: Lessons learned from the coordination of an Initial Training Network (Marie Curie-ITN), Informationsveranstaltung Foerderung der Mobilitaet und Karriereentwicklung von Nachwuchswissenschaftler/Innen: Marie Sklodowska Curie-Massnahmen in Horizon 2020, TU Dresden, 14.1.14 (2014)

J. Eckert: Tailoring structure formation and mechanical properties of nanomaterials, 14th International Symposium on Plasticity and Its Current Applications (Plasticity '14), Freeport/ Bahamas, 7.1.14 (2014)

J. Eckert: Improving the deformability of metallic glasses and composites, 10th International Conference on Bulk Metallic Glasses (BMG X), Shanghai/ PR China, 4.6.14. (2014)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen, Materialwissenschaftliches Kolloqium, Montanuniversitaet Leoben and Erich-Schmid Institut fuer Materialwissenschaft der Oesterreichischen Akademie der Wissenschaften, Leoben/ Oesterreich, 10.6.14 (2014)

J. Eckert: Improving the ductility of bulk metallic glasses by mechanical treatment, Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14 (2014)

J. Eckert: High-strength ultrafine-grained materials with enhanced deformability, 15th International Conference on Rapidly Quenched and Metastable Materials (RQ 15), Shanghai/ PR China, 26.8.14 (2014)

J. Eckert: Complex metallic materials with hierarchical hybrid structures: Tailoring metastable phases for engineering applications, Materials Science and Engineering Congress (MSE 2014), Darmstadt, 25.9.14 (2014)

J. Eckert: Tailoring structure formation and properties of metastable alloys and composites, Symposium on "Frontiers of Solidification Research", DLR Koeln, 29.9.14 (2014)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen- Modernes Legierungsdesign am Beispiel von metallischen Glaesern und nanostrukturierten Kompositen, Technikwissenschaftliche Klasse der Saechsischen Akademie der Wissenschaften zu Leipzig, Leipzig, 10.10.14 (2014)

J. Eckert: Ductilization of bulk metallic glasses by mechanical treatment, 5th International Conference on Materials Science and Technologies (RoMat 2014), Bukarest/ Rumaenien, 16.10.14 (2014)

J. Eckert, S. Scudino, D. Beitelschmidt, H.S. Shahabi, U. Kuehn, M. Stoica: Ductilization of metallic glasses by mechanical treatment, TMS 2014, The 143rd Annual Meeting and Exhibition, San Diego, California/ USA, 3/2014 (2014)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, E.A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable Ti-based alloys at the nanoscale for biomedical applications, 5th International Conference on Materials Science and Technology, RoMat 2014, Bucharest/ Romania, 15.-17.10.14 (2014)

A. Gebert, A. Helth, K. Zhuravleva, M. Boenisch, P.F. Gostin, S. Oswald, M. Calin, J. Eckert: New Ti-Nb-based alloys for implant applications, Indo-German Workshop: Strategies for Improved Bone Replacement Materials and Orthopeadic Implants- Design- Manufactoring- Technologies, TU Dresden, Universitaetsklinikum Carl Gustav Carus, Dresden, 19.-21.2.14 (2014)

A. Gebert: New Ti-based alloys for implant applications, Werkstoffkolloquium Universitaet Erlangen-Nuernberg, Erlangen, 15.4.14 (2014)

T. Gustmann: 3D laser beam melting at IFW Dresden, Gruppentreffen mit der Gruppe: Selektives Laserstrahlschmelzen, des SFB 814: Additive Fertigung (FAU Erlangen-Nuernberg), Erlangen, 3.12.14 (2014)

V. Hoffmann: Advances in glow discharge spectrochemistry, 2014 Winter Conference on Plasma Spectrochemistry, Amelia Island, Florida/ USA, 6.-11.1.14 (2014)

M.R. Mueller, S. Menzel, U. Kuenzelmann, I. Petrov, J. Knoch, K. Kallis: Tackling hillocks growth after Aluminum CMP, International Conference on Planarization/CMP Technology (ICPT) 2014, Kobe/ Japan, 19.-21.11.14 (2014)

H. Schwab: 3D laser beam melting at IFW Dresden, Gruppentreffen mit der Gruppe: Selektives Laserstrahlschmelzen, des SFB 814: Additive Fertigung (FAU Erlangen-Nuernberg), Erlangen/ Germany, 3.12.14 (2014)

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert: Compressive behavior of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}99.5Cu0.5 glassy alloy, Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14 (2014)

M. Stoica: Preparation of (bulk) metallic glasses: tutorial, The 1st VitriMetTech Workshop: Industry Network Meeting on Synthesis and Manufacturing of Metallic Glasses, University of Cambridge, Cambridge/ UK, 15.-19.9.14 (2014)

M. Stoica, J. Eckert: Casting of bulk metallic glasses: Challenges to overcome, The 5th International Conference on Materials Science and Technologies RoMat 2014, Bucharest/ Romania, 10/2014 (2014)

A. Winkler: Microfluidics using surface acoustic waves, Microfluidics Bio Workshop 2014, TU Dresden, Bad Schandau, 10.6.14 (2014)

2013

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, S. Abdi, A. Panigrahi, M., Gebert, A. Zehetbauer, J. Eckert: Enhancing the biomechanical capacity of Ti-Nb-based metastable alloys for implant applications, International Conference EUROMAT 2013, Sevilla/ Spain, 8.-13.9.13 (2013)

M. Calin, N. Zheng, A. Helth, M. Boenisch, S. Abdi, A. Gebert, J. Eckert: Titanium-based amorphous alloys as prospective biomaterials, Conference "Advanced Materials and Structures "- AMS 2013, Timisoara/ Romania, 24.-25.10.13 (2013)

M. Calin, N. Zheng, S. Abdi, P.F. Gostin, C. Damm, M.D. Baro, P. Rizzi, A. Gebert, J. Eckert: Biocompatible Ti-based metallic glasses for implant applications, ISMANAM 2013 Conference, Turin/ Italy, 30.6.-5.7.13 (2013)

J. Eckert, K.K. Song, S. Pauly, B.A. Sun, Y. Zhang, R. Li, S. Gorantla, T. Gemming, U. Kuehn: Deformation mechanisms in metastable CuZrAl composites, 2013 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (X)", San Antonio/ USA, 5.3.13 (2013)

J. Eckert: Heterogeneity and phase transformations as ways to tailor the deformability of high-strength metastable materials, China-Germany Workshop on "Microstructure-Driven Design and Performance of Advanced Metals", Shenyang/ PR China, 14.4.13 (2013)

J. Eckert: Application of amorphous alloys: Potential and challenges to overcome, Res Metallica 2013 Workshop on "Amorphous Alloys and Bulk Metallic Glasses", KU Leuven/ Belgien, 8.5.13. (2013)

J. Eckert: Metallic glasses - Structure, properties and perspectives, Kolloquium on "Current Challenges in Materials Physics", Universitaet Goettingen, 24.5.13 (2013)

J. Eckert: Mechanical properties of metallic glasses and composites, 20th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2013), Turin/ Italy, 2.7.13 (2013)

A. Gebert, R. Sueptitz, M. Uhlemann, J. Eckert: Electrochemical micromachining of bulk metallic glasses, TMS Annual Spring Meeting, San Antonio, Texas/ USA, 3.-7.3.13 (2013)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable beta-type Ti-based alloys at the nano-scale for biomedical applications, ISMANAM 2013, Turin/ Italien, 30.5.-5.6.13 (2013)

M. Herklotz, F. Scheiba, N.K. Yavuz, D. Wadewitz, M. Hinterstein, A.-C. Dippel, J. Eckert, H. Ehrenberg: In operando / In situ studies on battery materials - capabilities of the beamline P02.1 and recent results, Workshop: Structural and in situ material science at Beamline P02.1 et PETRA III, DESY Hamburg, 12.-13.9.13 (2013)

H. Hermann: Simulation of low-k insulators for application in semiconducting devices, Workshop Computational exploration of atomistic structures and their Interrelation with Physical Properties; Dresden, 4.-8.11.13 (2013)

V. Hoffmann: Plasma diagnostics on analytical glow discharges, International Workshop "Diagnostic Systems for Plasma Processes" Lichtenwalde, Chemnitz, 24.9.13 (2013)

V. Hoffmann: Progress and demands in analytical glow discharges, Colloquium Spectroscopicum Internationale XXXVIII, Tromsoe/ Norwegen, 17.-20.6.13 (2013)

I. Kaban: Structural studies of CuZr and CuZrAl metallic glasses in relation to their GFA and mechanical properties, Institutsseminar, Institut fuer Materialphysik im Weltraum, DLR Koeln, 17.12.13 (2013)

U. Kuenzelmann, M.R. Mueller, S.B. Menzel, C. Lin, J. Dysard, J.W. Bartha, J. Knoch: Morphological and topological effects during the CMP of Aluminium, 29th European CMP Users Meeting Spring 2013, Zuerich/ CH, 11.-12.4.13 (2013)

S.B. Menzel, E. Brachmann, A. Winkler, C. Strobel, M. Albert, M. Fahland, T. Gemming: Mechanical testing of thin film p-i-n silicon solar cells on flexible polymer substrates, 28th EU PVSEC, Paris/ France, 30.9.-4.10.13 (2013)

S. Oswald: Depth profiling in the nm-thickness range: A critical evaluation of angle-resolved XPS, Universitaet Wuerzburg, Kolloqium Experimentelle Physik 7, Wuerzburg, 11.12.13 (2013)

M. Stoica: Fe-based bulk metallic glasses, properties and possible applications, Soft Magnetic Materials Conference (SMM 21), Budapest/ Hungary, 1.-4.9.13 (2013)

M. Stoica, I. Kaban, J. Bednarcik, G. Vaughan, J. Eckert: Fe-based bulk metallic glasses with enhanced plastic deformation, The 8th International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2013, Las Vegas/ USA, 2.-6.12.13 (2013)

M. Stoica, A.H. Tagvaei, P. Kollar, J. Fuezer, J. Eckert: FeNiMoPCB and CoFeTaB bulk metallic glasses and composites, preparation and properties, Amorphous and Nanocrystalline Magnetic Materials (ANMM), Sendai/ Japan, 30.9.-4.10.13 (2013)

M. Stoica, J. Bednacik, G. Vaughan, I. Kaban, J. Eckert: Fe-based bulk metallic glasses with enhanced plastic deformation, ISMANAM 2013, Torino/ Italy, 30.6.-5.7.13 (2013)

M. Stoica: Soft magnetic Fe-based amorphous and (nano)composite alloys with very good mechanical properties, Eingeladener Vortrag bei TMS Tagung, San Antonio/ USA, 3.-7.3.13 (2013)

2012

M. Calin, A. Helth, M. Boenisch, N. Zheng, A. Gebert, J. Eckert: Microstructural design and innovative processing of multicomponent Ti-based alloys for structural applications, Conference: Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania - 'Seeds for the Future', Bukarest/ Rumaenien, 25.-28.9.12 (2012)

M. Calin, N. Zheng, M. Boenisch, A. Helth, A. Gebert, J. Eckert: Strengthening of metastable Ti-based alloys by microstructure design, 4 th International Conference on Materials Science and Technologies ROMAT 2012, Bukarest/ Rumaenien, 17.-19.10.12 (2012)

J. Eckert: Plastic deformation in bulk metallic glasses and composites, 19 th. International Symposium on Metastable Amorphous and Nanostructured Materials (ISMANAM 2012), Moskau/ Russland, 19.6.12 (2012)

J. Eckert, A. Gebert, M. Uhlemann, R. Sueptitz, U. Kuehn, B.S. Kim, M.H. Lee, T. S. Kim: Stability and recycling of rare earth permanent magnets, International Symposium on Novel and Nano Materials (ISNNM 2012), Istanbul/ Tuerkei, 27.8.12 (2012)

J. Eckert, N. Mattern, J.H. Han, J.M. Park, U. Vainio, A. Shariq, D.H. Kim: Phase separated metallic glasses: Microstructure formation and tunning of mechanical properties, 11th. International Conference on Nanostructured Materials (NANO 2012), Rhodos/ Griechenland, 29.8.12 (2012)

J. Eckert, L.C. Zhang, T.B. Sercombe, W. Xu, K. Xia, A. Helth, M. Boenisch, M. Calin, A. Gebert, M. Zehetbauer: Advanced structural design and innovative processing of biocompatible Beta Ti-Nb based alloys, Material Science and Engineering Congress (MSE 2012), Darmstadt, 27.9.12 (2012)

J. Eckert: Ways to improve the plasticity of bulk metallic glass composites, Global Research Laboratory Germany - Korea Workshop on Bulk Metallic Glass and Nanostructured Materials, Seoul National University, Seoul/ Korea, 12.10.12 (2012)

J. Eckert: Structure evolution and plasticity in metallic glasses, 2nd. Sino-German Workshop, Structure and Dynamics of Bulk Metallic Glasses, Koeln, 5.11.12 (2012)

J. Eckert: Bulk metallic glasses and composites: Structure and deformation behavior, Northwestern Polytechnical University, Xi'an/ PR China, 14.12.12 (2012)

J. Eckert: Enhanced tensile ductility of bulk metallic glasses by tailoring atomic order, 9th International Conference on Bulk Metallic Glasses (BMG IX), Xiamen/ PR China, 18.12.12 (2012)

J. Eckert, K.K. Song, S. Pauly, Y. Zhang, P. Gargarella, N.S. Barekar, U. Kuehn, M. Stoica: Formation of B2 CuZr in metastable CuZr-based bulk glass forming alloys, 2012 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (IX)", Orlando/ USA, 13.3.12 (2012)

J. Eckert: Metallic glasses and composites: Structure and deformation behavior, Universitaet Wien, Institut fuer Physik, Wien/ Oesterreich, 26.4.12 (2012)

J. Eckert: Rare metal policy and strategy in Europe - The situation in Germany and at the IFW Dresden, Korean-German Workshop on Rare Metals and 2nd Rare Metal Industry Development Forum, Incheon/ Korea, 8.5.12 (2012)

J. Eckert: Deformation in bulk metallic glasses and composites, 19th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2012), Moskau/ Russland 19.6.12 (2012)

F. Fedorov: Electrochemical deposition in ordered anodized alumina template: Approach from the top, GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt, 17.12.12 (2012)

A. Gebert: Local corrosion phenomena of bulk glass-forming alloys as a consequence of processing-induced heterogeneities, Gordon Research Conference on Aqueous Corrosion, Colby Saywer College New London, NH/ USA, 8.-13.7.12 (2012)

A. Gebert: Corrosion and biocompatibility, BioTiNet Summer School "Ti in Medicine", Caldes, Barcelona/ Spain, 3.-8.5.12 (2012)

A. Gebert: Durability assessment and recycling strategies for rare earth magnets, Second International Workshop on Rare Metals, Boston/ USA, 24.-25.11.12 (2012)

A. Helth, K. Zhuravleva, P.F. Gostin, S. Oswald, A. Gebert, M. Calin, U. Hempel, K.S. Lips, A. Cavalcanti-Adam, J. Eckert: Neue Beta-Ti-Nb Legierungen fuer Hartgewebeimplantatanwendungen, 61. Jahrestagung Norddeutsche Orthopaeden- und Unfallchirurgenvereinigung, Hamburg, 16.6.12 (2012)

V. Hoffmann, M. Voronov, T. Wallendorf, S. Marke, G.M. Hieftje, S. Ray, C. Engelhard, W. Buscher: Spatial- and time-resolved measurements by means of a new acousto-optical imaging spectrometer in combination with glow discharge sources, 2012 Winter Conference on Plasma Spectrochemistry, Tucson/ Arizona, 9.-14.1.12 (2012)

I. Kaban: Phase separation in monotectic alloys as a route for liquid state fabrication of metal matrix composites, 7th International Conference on High Temperature Capillarity, Eilat/ Israel, 18.-22.3.12 (2012)

N. Mattern, J. Han, U. Vainio, A. Shariq, J. Eckert: Phase-separated metallic glasses, ISMANAM Conference 2012, Moskau/ Russland, 18.-22.6.12 (2012)

N. Mattern: In Situ high temperature X-Ray diffraction studies on bulk metallic glasses, 2012 TMS Annual Meeting, Orlando/ USA, 12.-16.3.12 (2012)

N. Mattern: Phase-separated metallic glasses, Seminar MPI fuer Eisenforschung, Duesseldorf, 11.9.12 (2012)

S. Scudino, H.S. Shahabi, M. Stoica, U. Kuehn, J. Eckert: Enhanced tensile ductility of bulk metallic glasses by customized microstructural heterogeneities, ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12 (2012)

S. Scudino, U. Kuehn, J. Eckert: Mechanical properties of complex metallic alloys, MRS Fall Meeting, Boston/ USA, 25.-30.11.12 (2012)

S. Scudino: Material efficient design for sustainable energy applications, Korean- German Workshop on Rare Metals, Incheon/ Korea, 8.5.12 (2012)

S. Scudino: Powder metallurgy of high-strength Al-based alloys and composites, C-MAC Workshop Grenoble/ France, 21.-22.5.12 (2012)

M. Stoica: Metallic glass composites - an overview, The 2nd BioTiNet Workshop: Research Methodology and Research Project Management, Leuven/ Belgium, 4.-9.3.12 (2012)

M. Stoica, A. Seifoddini, R.T. Qu, J.W. Cui, Z.F. Zhang, T. Gemming, N. Mattern, J. Eckert: Ductile (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloy, ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12 (2012)

R. Sueptitz, M. Uhlemann, J. Eckert, A. Gebert: The influence of superimposed magnetic fields on the corrosion behavior of iron, 16th All Polish Corrosion Symposium, Poraj/ Polen, 26.-30.11.12 (2012)

J. Thomas, D. Lohse, T. Gemming: Verbesserung der Qualitaet von FIB-Lamellen durch Beschuss mit Ar-Ionen geringer Energie, Anwendertreffen "Festkoerperpraeparation", Chemnitz, 7.-8.3.12 (2012)

J. Thomas, D. Lohse, T. Gemming: Qualitaetsverbesserung von FIB-Lamellen durch Ar-Ionenduennen mit geringer Energie, Workshop TEM-Praeparation Berlin-Brandenburg-Sachsen, Dresden, 20.4.12 (2012)

K. Tschulik: Magnetic gradients as novel structuring tool, ELECTROCHEMISTRY 2012 - Fundamental and Engineering Needs for Sustainable Development, Muenchen, 17.-19.9.12 (2012)

M. Uhlemann, K. Tschulik, G. Mutschke, C. Cierpka, X. Yang, A. Gebert, J. Eckert: Structured electrodeposition in magnetic gradient fields, Interfinish 2012, Milano/ Italy, 14.-16.11.12 (2012)

M. Voronov, V. Hoffmann, T. Steingrobe, W. Buscher, C. Engelhard, A. Storey, S. Ray, G. Hieftje: Thermal mechanism of prepeak formation in pulsed glow discharge, 65th Annual Gaseous Electronics Conference, Austin, Texas/ USA, 22.-26.10.12 (2012)

2011

M. Calin: More women on scientific boards - why does it matter?, DIVERSITY Workshop "Woman in European Materials Science Research Institutes", Corfu/ Greece, 19.-20.5.11 (2011)

M. Calin, N. Zheng, A. Helth, L.C. Zhang, A. Gebert, J. Eckert: Phase transformations and mechanical behavior of glassy/nanostructured Ti-based alloys and their composites, International Conference on Advanced Materials and Structures, Timisoara/ Romania, 27.-28.10.11 (2011)

M. Calin, N. Zheng, A. Helth, F. Gostin, A. Gebert, J. Eckert: Ti-based metallic glasses and composites with improved mechanical properties, Colloquium, Dipartimento di Chimica I.F.M., Universita di Torino, Torino/ Italy, 23.11.11 (2011)

J. Eckert, A. Gebert, U. Kuehn: Rare metal related issues in Germany, 1. International Workshop on Rare Metals, KITECH, KIRAM, Incheon/ Korea, 18.-19.4.11 (2011)

J. Eckert: Ti-base single- and multi-phase alloys for high strength applications, Global Research Laboratory Germany - Korea Workshop on Bulk Metallic Glass and Nanostructured Materials, Lisbon/ Portugal, 25.8.11 (2011)

J. Eckert: Designing ductile and tough bulk metallic glasses and composites, 14th International Conference on Rapidly Quenched and Metastable Materials, Salvador/ Brasil, 2.9.11 (2011)

J. Eckert: Present understanding of the mechanical properties of metallic glasses, Kick-Off-Meeting of the Special Research Area 1594 "Topological Engineering of Ultrastrong Glasses" of the German Science Foundation (DFG), Erlangen, 4.10.11 (2011)

J. Eckert: The role of heterogeneity for tailoring the mechanical properties of advanced metallic materials, 2nd Symposium for the Global Research Laboratory (GRL) Program of Korea, Seoul/ Korea, 22.2.11 (2011)

J. Eckert: Ti-based bulk metallic glasses and composites for structural and functional applications, TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (VIII)", San Diego/ USA, 3.3.11 (2011)

J. Eckert: Phase formation and microstructure development in multicomponent alloys, Hauptvortrag im Rahmen der Fruehjahrstagung der Sektion Kondensierte Materie (SKM) der DPG, Symposium on "Heterogeneous Nucleation and Microstructure Formation: Steps towards a System- and Scale-bridging Understanding", Dresden, 17.3.11 (2011)

J. Eckert: Development of bulk metallic glasses and composites with high plasticity, Shanghai University, School of Materials Science and Engineering, Institute of Materials, Shanghai/ P.R. China, 13.5.11 (2011)

J. Eckert: Correlation between structure and deformation behavior in glassy materials, 8th International Conference on Bulk Metallic Glasses (BMG VIII), Hong Kong/ PR China, 16.5.11 (2011)

J. Eckert: Ways to improve the plasticity of bulk metallic glasses, 2011 Taiwan Tech International Workshop on Metallic Glasses, Taiwan University of Science and Technology, Taipei/ Taiwan, 23.5.11 (2011)

J. Eckert: Hybrid nanostructured materials for structural and functional applications, 18th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2011), Gijon/ Spanien, 28.6.11 (2011)

P.F. Gostin, U. Siegel, F. Mayr, J. Romberg, C. Mickel, S. Baunack, S. Oswald, A. Gebert, U. Kuehn, J. Eckert, L. Schultz: Corrosion behaviour of amorphous iron base alloys, Kolloquium, Vacuumschmelze Hanau, 15.9.11 (2011)

I. Kaban: Measurements of the surface and interfacial tension in liquid metals and alloys, Mini-Symposium Lorenz Force Sigmometry LOFOS, TU Ilmenau, 24.-25.3.11 (2011)

D. Klemm, L. Loeber, R. Petters, U. Kuehn, J. Eckert: 3D Laserstrahlschmelzen - Anwendung in der Materialwissenschaft und in der Medizintechnik, Institutskolloquium IFOM, Prof. Fuessel, Westsaechsische Hochschule Zwickau, 1.6.11 (2011)

L. Loeber: Selektives Laserschmelzen von Titanaluminiden, Firmenvortrag, Muenchen, 5.5.11 (2011)

N. Mattern: Phase separation in liquid and amorphous metallic alloys, Institute Seminar, Shanghai University, Shanghai/ China, 13.5.11 (2011)

N. Mattern: Structure formation and properties of phase separated metallic glasses, Taiwan Tech Workshop on Metallic Glasses, National Taiwan University of Science and Technology, Taipei/ Taiwan, 23.5.11 (2011)

N. Mattern: Heterogeneous metallic glasses studied by anomalous small angle X-ray scattering and atom probe tomography, ASAXS in Condensed Matter Science, Helmholtzzentrum fuer Materialien und Energie, Berlin, 24.-25.11.11 (2011)

N. Mattern: Phase-separated metallic glasses, Institutsseminar, 1. Physikalisches Institut, Universitaet Goettingen, 5.12.11 (2011)

N. Van Steenberge, D. Ruiz Romera, M. Stoica, G. De Vos, S. Claessens: Towards the industrial upgrade of bulk metallic glasses: challenges to overcome, The European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2011), Symposium C13: Metallic Glasses and Related Composites: New Routes for Functional and Strong Materials, Montpellier/ France, 12.-15.9.11 (2011)

M. Stoica: New achievements in the area of bulk metallic glasses (BMGs), 4th International Conference on Advanced Materials and Structures - AMS '11, Timisoara/ Romania, 27.-28.10.11 (2011)

M. Stoica: Structural characterization of materials using synchrotron radiation, The 1st BioTiNet Workshop: Advanced Methods for Materials Characterisation, Ljubljana/ Slovenia, 23.-27.10.11 (2011)

M. Stoica: Thermal stability and phase evolution of Cu-added Fe-based bulk metallic glasses, The 14th International Conference on Rapidly Quenched and Metastable Materials, RQ14, Salvador/ Brazil, 28.8.-3.9.11 (2011)

J. Thomas, J. Ramm, T. Gemming: Elektronenbeugung zur Analyse duenner Funktionsschichten - ein Ueberblick, Workshop EFDS "Moderne Methoden der Oberflaechen- und Duennschichtanalytik", Dresden, 29.-30.11.11 (2011)

J. Thomas, J. Ramm, T. Gemming: Elektronenbeugung zur Analyse duenner Funktionsschichten: Eine moderne Methode?, 16. Tagung Festkoerperanalytik, Wien/ Oesterreich, 4.-6.7.11 (2011)

S. Wege, H. Wendrock, J. Eckert: Method for measuring local strains in polycrystals using EBSD or KOSSEL, RMS EBSD Tagung 2011, Duesseldorf, 28.-30.3.11 (2011)

S. Wege, H. Wendrock, J. Eckert: A new concept of strain determination by precision EBSD, Workshop, Leipzig, 1.3.11 (2011)

S. Wege, H. Wendrock, J. Eckert: Method for measuring local strains in polycrystals using EBSD or KOSSEL, RMS EBSD Tagung 2011, Duesseldorf, 28.-30.3.11 (2011)

2010

M. Calin: Getting more women in decision-making in materials science (DIVERSITY Project), Colloquim - Dipartimento di Chimica I.F.M., Universita di Torino, Turin/ Italy, 24.-25.11.10 (2010)

M. Calin: Improving the gender diversity management in materials research institutions - DIVERSITY FP7 Project, Balanced Leadership - DIVERSITY Meeting, REPM'10 Workshop, Bled/ Slovenia, 31.8.10 (2010)

M. Calin, A. Gebert: Diversity project out of WomenInNano, European Workshop 'Leadership positions: how accessible are they for women in materials research?', University of Barcelona/ Spain, 19.-21.5.10 (2010)

J. Eckert: Metallische Glaeser und Komposite - Materialdesign fuer neue Hochleistungswerkstoffe, Karlsruher Werkstoffkolloquium, Karlsruhe Institute of Technology, KIT, Karlsruhe, 26.1.10 (2010)

J. Eckert: Metastable metallic materials: Tailoring properties by phase and microstructure design, 11. ZFM-Festkoerpertag 2010, Zentrum fuer Festkoerperchemie und Neue Materialien, Leibniz Universitaet Hannover, 29.1.10 (2010)

J. Eckert: Strengthening of Ti-base glass-forming alloys by microstructure design, 2010 TMS Annual Meeting & Exhibition, Symposium "Bulk Metallic Glasses (VII)", Seattle/ USA, 16.2.10 (2010)

J. Eckert: Materialdesign innovativer metallischer Werkstoffe, Workshop Nanomaterial - BDLI priority program "Eco-efficient Flying", EADS, Ottobrunn, 26.2.10 (2010)

J. Eckert: Structure-property relations in bulk metallic glasses, International Conference on Mechanical Properties of Materials (ICMPM), ), Hangzhou/ China, 27.5.10 (2010)

J. Eckert: Structure-properties relationship in bulk metallic glasses and bulk metallic glass composites, International Workshop on Metallic Glasses, Natl. Taiwan University of Science and Technology, Teipei/ Taiwan, 31.5.10 (2010)

J. Eckert: Bulk metallic glasses and composites: Development of high performance materials by phase and microstructure design, National Central University, Jhongli/ Taiwan, 1.6.10 (2010)

J. Eckert: Plasticity enhancement in bulk metallic glasses, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2010), Zuerich/ Switzerland, 6.-9.7.10 (2010)

J. Eckert: Metallische Glaeser und Komposite - Herstellung, Eigenschaften und Innovationspotenzial, Workshop / Side Event Innovationspotenzial ausgewaehlter neuer Werkstoffe, Materials Science and Engineering Congress (MSE 2010), Darmstadt, 25.8.10 (2010)

J. Eckert: Transformation-mediated plasticity and the role of heterogeneity on improving the deformability of metallic glasses, Sino-German Workshop "Building the Bridge between Physics and Materials Science in Amorphous Metals", Beijing/ China, 13.10.10 (2010)

J. Eckert: Transformation-induced plasticity enhancement in metallic glasses: The role of structure and heterogeneity, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Gangneung/ Korea, 15.10.10 (2010)

J. Eckert: Tuning the structure for enhancing the plasticity of metallic glasses, MRS Fall Meeting, Symposium on Bulk Metallic Glasses and their Applications, Boston/ USA, 2.12.10 (2010)

H. Ehrenberg: Lithiumionen-Batterien: Perspektiven und materialwissenschaftliche Herausforderungen, Vortrag auf der 19. Diskussionstagung Anorganisch-Technische Chemie, Frankfurt, 18.2.10 (2010)

H. Ehrenberg: Elektrodenmaterialien fuer Lithium-Ionenbatterien: Materialwissenschaftliche Herausforderungen und Perspektiven, Vortrag am Fraunhofer Center Nanoelektronische Technologie CNT in Dresden, 11.3.10 (2010)

H. Ehrenberg: Lithiumionen-Batterien: Perspektiven und materialwissenschaftliche Herausforderungen, Vortrag auf der Klausurtagung des SFB 609 Elektromagnetische Stroemungsbeeinflussung in Metallurgie, Kristallzuechtung und Elektrochemie in Schmochtitz, 12.3.10 (2010)

H. Ehrenberg, I. Chumak, G. Dmytriv, V. Pavlyuk, H. Pauly, S. Oswald: New concept for intermetallic composite anodes in Li-ion batteries, Vortrag auf der XI. International Conference on Crystal Chemistry of Intermetallic Compounds in Lviv/ Ukraine, 2.6.10 (2010)

H. Ehrenberg: Lithiumionen-Batterien: Perspektiven und materialwissenschaftliche Herausforderungen, Anorganisch-chemisches Kolloquium, Universitaet Bonn, 1.7.10 (2010)

V. Hoffmann: New instrumentation for RF-GD-OES, International Glow Discharge Spectroscopy Symposium, CUFR Jean Francois Champollion, Albi/ Frankreich, 22.-27.8.10 (2010)

V. Hoffmann: GDOES-Analyse ultraduenner Schichten mit verbesserter Hardware, Wissenschaftliches Kolloquium des Institutes fuer Werkstoffkunde der TU Darmstadt, 1.7.10 (2010)

D. Klemm, U. Kuehn, J. Eckert: Selektives Laserstrahlschmelzen - generative Fertigung 3dimensional komplex gestalteter Formkoerper, MBZ Institutsseminar, Dresden, 19.4.10 (2010)

D. Klemm, R. Taranczewski, V. Hoffmann, U. Kuehn, J. Eckert: 3D Laserstrahlschmelzen Technologie fuer die generative Fertigung und Anwendung in der Materialforschung, Institutsseminar vom Fraunhofer Institut fuer Werkstoff- und Strahltechnik, Dresden, 26.4.10 (2010)

U. Kuehn: Herstellung, Eigenschaften und Anwendungen massiver metallischer Glaeser und Komposite, Symposium "Leichtbauwerkstoffe auf Nanobasis", Erding bei Muenchen, 5.5.10 (2010)

N. Mattern, U. Vainio, J.M. Park, J.H. Han, A. Shariq, D.H. Kim, J. Eckert: Liquid-liquid phase separation and structure formation of Cu46Zr47-xAl7Gdx metallic glasses, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials ISMANAM 2010, Zurich/ Switzerland, 4.-9.7.10 (2010)

U. Siegel, U. Kuehn, J. Eckert: Metallische Glaeser und Komposite - Herstellung, Eigenschaften und Applikationen, Material Forum des Materials Valley e.V., Vacuum Schmelze Hanau, 15.3.10 (2010)

K. Wetzig: 50 Jahre Elektronenmikroskopie in Dresden - Von den Wurzeln bis zur Gegenwart, Physikalisches Kolloquium, TU Dresden, 23.11.10 (2010)

K. Wetzig: Application of Ion beams in materials science, Vortragsreihe an der Slovakischen TU Bratislava/ Slovakische Republik, 31.5.-4.6.10 (2010)

2009

M. Calin, J. Das, L.-C. Zhang, C. Ghinea, C. Filipoiu, J. Eckert: Strengthening of multi-component Ti-based glass-forming alloys by microstructure design, WPI-Europe Workshop on Metallic Glasses and Related Materials, Grenoble/ France, 25.-28.8.09 (2009)

J. Eckert: Metallische Werkstoffe der Zukunft - schon heute, Forum Neue Technologien, Voith AG, Heidenheim, 15.1.09 (2009)

J. Eckert: Amorphe und nanostrukturierte Materialien als Basis fuer neue Hochleistungswerkstoffe, Institut fuer Werkstofftechnik, Universitaet Bremen, 29.1.09 (2009)

J. Eckert: Structurally inhomogeneous ultrafine and glassy alloys, Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC/ USA, 12.2.09 (2009)

J. Eckert: How to improve the deformability of bulk metallic glasses, 2009 TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (VI)", San Francisco/ USA, 18.2.09 (2009)

J. Eckert: Heterostructured ultrafine and glassy alloys - Recent results, design strategies and deformation behavior, WPI-AIMR Annual Workshop 2009, Miyagi-Zao/ Japan, 6.3.09 (2009)

J. Eckert: Grundlagen und Anwendungen metallischer Glaeser und Komposite, VDMA Arbeitskreis Material Roadmap Expertenworkshop, Frankfurt, 3.4.09 (2009)

J. Eckert: Ultrafine and glassy alloys with improved deformability, Korea - Germany Joint Workshop on Amorphous - Nanostructured Materials, Ulsan/ Korea, 27.4.09 (2009)

J. Eckert: Bulk glassy composites: Phase formation and mechanical properties, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Seoul/ Korea, 29.4.09 (2009)

J. Eckert: Materialdesign fuer innovative Werkstoffe mit erweitertem Eigenschaftsspektrum, 13. Dresdner Leichtbausymposium 2009, Dresden, 18.6.09 (2009)

J. Eckert: Bulk metallic glasses and composites with different length-scale heterogeneities, Workshop on Future Directions in Bulk Metallic Glasses, Beijing/ China, 3.7.09 (2009)

J. Eckert: High-strength Al-based alloys and composites, 16th International Symposium on Metastable, Amorphous and Nanostructured Materials, (ISMANAM 2009), Beijing/ China, 6.7.09 (2009)

J. Eckert: Phase formation and properties of nanostructured and glassy metallic materials, Universitaet Wien/ Oesterreich, 16.7.09 (2009)

J. Eckert: Neue Materialien auf der Basis metastabiler Phasen, Materialwissenschaftliches Kolloqium, Universitaet Stuttgart, 21.7.09 (2009)

J. Eckert: Metallic glasses and composites - Development of high performance materials based on metastable phases, Seminar am Institut fuer Materialphysik im Weltraum, Deutsches Zentrum fuer Luft- und Raumfahrt e.V. (DLR), Koeln, 28.9.09 (2009)

J. Eckert: Processing, mechanical properties and applications of glassy alloys and composites, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), Symposium B13 - "Metallic Glasses", Glasgow/ UK, 8.9.09 (2009)

J. Eckert: Metastabile Phasen - Von den Grundlagen zu Anwendungen, Werkstoffwissenschaftliches Kolloquium, Universitaet Erlangen-Nuernberg, 27.10.09 (2009)

J. Eckert: Bulk metallic glasses and composites: The link between structure and deformability, 7th International Conference on Bulk Metallic Glasses (BMG VII), Busan/ Korea, 3.11.09 (2009)

J. Eckert: Current status of research on amorphous metals, Workshop on Amorphous Metals and Composites - Current Status and Future Directions, University of Melbourne/ Australien, 19.11.09 (2009)

J. Eckert: From BMGs to composites: The role of heterogeneities on improving the mechanical properties of metastable alloys, Workshop on Amorphous Metals and Composites - Current Status and Future Directions, University of Melbourne/ Australien, 19.11.09 (2009)

J. Eckert: Bulk metallic glasses and composites for engineering applications, Tewkesbury Lecture, University of Melbourne/ Australien, 19.11.09. (2009)

J. Eckert: Bulk metallic glasses and hierarchical composites: Tailoring of properties for engineering applications, Global Research Laboratory Korea - Germany Workshop on Bulk Metallic Glass and Nano-Structured Materials, Dresden, 18.12.09 (2009)

H. Ehrenberg: Phosphoolivine LiMPO4 (M=Mn,Fe,Co) cathodes in Li-ion batteries: properties, mechanism and new composite concepts, Vortrag an der Justus-Liebig-Universitaet Giessen, 3.2.09 (2009)

H. Ehrenberg, N.N. Bramnik, W. Jaegermann, J.J. Schneider: Fatigue in LiCoPO4 cathodes for Li-ion batteries and new composite concepts, Euromat, Glasgow/ UK, 7.-10.9.09 (2009)

H. Ehrenberg: Li-Ionenbatterien: Perspektiven und materialwissenschaftliche Herausforderungen, Anorganisch-chemisches Kolloquium, TU Berlin, 23.9.09 (2009)

H. Ehrenberg: Li-Ionenbatterien: Perspektiven und materialwissenschaftliche Herausforderungen, Anorganisch-chemisches Kolloquium, Universitaet zu Koeln, 2.12.09 (2009)

H. Ehrenberg: Werkstoffliche Herausforderungen in Li-Batterien, Symposium Hochleistungskeramik 2009 des Gemeinschaftsausschusses der DKG und der DGM, Eurogress Aachen, 26.3.09 (2009)

H. Hermann: Theoretische Ansaetze fuer ultralow-k Materialien, Insitutsseminar, Universitaet Cottbus, 6.7.09 (2009)

H. Hermann: Modellierung von fulleren-basierten Schichten mit optimierten Eigenschaften, DGM Arbeitskreis-Workshop, Dresden, 24.6.09 (2009)

V. Hoffmann: Neue Entwicklungen in der analytischen Glimmentladungsspektrometrie, Institutsseminar, FH Senftenberg, 19.5.09 (2009)

V. Hoffmann, V. Efimova, D. Klemm, M. Voronov, J. Eckert: Gepulste Glimmentladungen - von den Grundlagen zu den Anwendungen, 15. Tagung Festkoerperanalytik, Chemnitz, 12.-16.7.09 (2009)

U. Kuehn: Herstellung, Eigenschaften und Anwendungen massiver metallischer Glaeser und Komposite, Workshop des RGM-Metall-Netzwerkes im Rahmen des BMWi-Impulsprogramms NeMat-Phase2, Technologieorientiertes Gruenderzentrum, TGZ, Glaubitz, 11.3.09 (2009)

N. Mattern: Phase separation in liqud and amorphous metallic alloys, Korea-Germany Joint Workshop on Amorphous/ Nanostructured Materials, Ulsan/ Korea, 27.4.09 (2009)

N. Mattern: Heterogeneous metallic glasses by phase separation in the liquid, Korea-Germany Workshop on Bulk Metallic Glasses and Nano-structured Materials, Seoul/ Korea, 29.4.09 (2009)

D. Ruiz Romera, N. Van Steenberge, M. Stoica, K. Van Brussel, M. De Wulf, J. Eckert, S. Claessens: Technological applications of bulk metallic glasses: challenges to overcome, IWMG09: International Workshop on Structural and Mechanical Properties of Metallic Glasses, Barcelona/ Spanien, 17.-19.6.09 (2009)

M. Stoica, J. Eckert, D. Ruiz Romera, N. Van Steenberge, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses: thermal stability and magnetic properties, The WPI-Europe Workshop on Metallic Glasses and Related Materials, Grenoble/ France, 25.-28.8.09 (2009)

M. Stoica, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: FeCoBSiNb bulk metallic glasses with Cu additions, E-MRS Fall Meeting 2009, Warshaw/ Poland, 14.-18.9.09 (2009)

M. Stoica, R. Li, S. Roth, J. Eckert, G. Vaughan, A.R. Yavari: Magnetic properties of FeCoBSiNb BMGs with Cu additions, 11th International Conference on Advanced Materials- ICAM 2009, Rio/ Brazil, 20.-25.9.09 (2009)

M. Stoica, R. Li, A.R. Yavari, G. Vaughan, J. Eckert: Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses, International Symposium on Metastable, Amorphous and Nanostructured Materials- ISMANAM 2009, Beijing/ China, 5.-9.7.09 (2009)

2008

J. Acker, S. Buecker, V. Hoffmann: Flammen-Molekuelabsorptionsspektrometrie zweiatomiger Molekuele - Zum Mechanismus der Bildung von AlF in der Acetylen-Lachgas-Flamme, 2nd International Symposium on CSAAS, Berlin, 7.-8.10.08 (2008)

J. Eckert: Complex metallic alloys in confined geometries: Processing, structure and mechanical properties, International Workshop on Multiscale Phenomena in Materials, Wien/ Oesterreich, 10.9.08 (2008)

H. Ehrenberg: Crystallographic aspects in Li-ion batteries: The effect of structural changes and microstructure on fatigue of cathode materials, Electrochemistry - Crossing boundaries, Vortrag an der Universitaet Giessen, 6.-8.10.08 (2008)

H. Ehrenberg, N.N. Bramnik, W. Jaegermann, S. Bhuvaneswari: Phosphoolivine LiMPO4 (M=Mn,Fe,Co) cathodes in Li-ion batteries: properties, mechanism and new composite concepts, International Conference on Advanced Ceramics and Composites, ACERS 32, Daytona Beach, Florida/ USA, 28.1.-2.2.08 (2008)

H. Ehrenberg, N.N. Bramnik, K. Nikolowski: Degradation mechanisms as guides to new electrode materials for Li-ion batteries, International Conference on Advanced Materials, ICAM 2008, Kerala/ Indien, 18.-21.2.08 (2008)

H. Ehrenberg, D. Mikhailova, N. Narayanan, A. Senyshyn, W. Gruner, S. Oswald, A. Voss, D. Trots, C. Ritter, H. Fuess: The effect of structural and compositional details on physical properties of new double-perovskites, International Union of Crystallography Meeting, Osaka/ Japan, 23.-31.8.08 (2008)

H. Ehrenberg, N. N. Bramnik, W. Jaegermann, S. Bhuvaneswari: Phosphoolivine LiMPO4 (M=Mn,Fe,Co) cathodes in Li-ion batteries: properties, mechanism and new composite concepts, Jilin University, Changchun/ China, 27.6.-4.7.08 (2008)

H. Ehrenberg: Lithium ion batteries: Challenges for materials science and perspectives, Jilin University, Changchun/ China, 27.6-4.7.08 (2008)

H. Ehrenberg: Synchrotron: in situ studies of electrochemical reactions, Inorganic Complex Materials, Puerto Escondido/ Mexiko, 2.-4.9.08 (2008)

V. Hoffmann, V. Efimova, M. Voronov, P. Smid, E. Steers, J. Eckert: Measurement of voltage and current in continuous and pulsed rf and dc glow discharges, 24th SPIG, Novi Sad/ Serbien, 25.-29.8.08 (2008)

V. Hoffmann: RF and pulsed glow discharges,and crater formation in glow discharges, FA CSS 2008, Reno/ USA, 28.9.-2.10.08 (2008)

V. Hoffmann, D. Klemm, K. Wetzig: Progress at thin film analysis by glow discharge spectrometry, Nordic Conference on Plasma Spectrochemistry, Loen/ Norwegen, 15.-18.6.08 (2008)

V. Hoffmann, V. Efimova, D. Klemm, M. Voronov, J. Eckert: Pulsed glow discharges from fundamentals to applications, 2008 Third Asia Pacific Winter Conference, Tsukuba/ Japan, 16.-21.11.08 (2008)

D. Klemm, V. Hoffmann: GD-OES Analysen duenner und duennster Schichten (Praxisseminar), Workshop der TAZ GmbH, Eurasburg, 13.-14.10.08 (2008)

U. Kuehn, A. Schlieter, U. Siegel, H. Wendrock, K. Werniewicz, L. Schultz, J. Eckert: Microstructure and thermomechanical properties of FeCrMoVC, RQ 13 (International Conference on Rapidly Quenched and Metastable Materials), Dresden, 28.9.08 (2008)

N. Mattern, T. Gemming, J. Thomas, G. Goeringk, H. Franz, J. Eckert: Phase separation in Ni-Nb-Y metallic glasses, ISMANAM2008, Buenos Aires/ Argentinien, 6.-10.7.08 (2008)

S. Menzel, T. Gemming: Study and application of individual multiwall carbon nanotubes, Nanotechnik User Meeting, Kusterdingen, 16.-17.4.08 (2008)

E. Steers, P. Smid, V. Hoffmann: Effects of traces of molecular gases (hydrogen, nitrogen) in glow discharges in noble gases, 24th SPIG, Novi Sad/ Serbien, 25.-29.8.08 (2008)

A. Teresiak, A. Gebert, M. Uhlemann: Untersuchungen an neuen Mg-Ni-La Legierungen als Elektrodenmaterial fuer wiederaufladbare Batterien, PANalytical-Industrie-Symposium, Kassel, 11.-12.6.08 (2008)

H. Wendrock: Anwendungen der EBSD-Technik in der Werkstoffforschung, Kolloquium "Neue Entwicklungen in der EDX-Analyse", Berlin, 3.-4.6.08 (2008)

2007

J. Eckert, M. Sakaliyska, K.B. Surreddi, S. Scudino: Complex metallic alloys, 14th International Symposium on Metastable and Nano Materials, Korfu/ Griechenland, 28.8.07 (2007)

J. Eckert: Improving the plastic deformability of bulk metallic glasses, MRS Fall Meeting, Boston/ USA, 28.11.07 (2007)

J. Eckert: Neue Hochleistungswerkstoffe auf der Basis metastabiler Phasen, Seminar am Fraunhofer Institut fuer Fertigungstechnik und Angewandte Materialforschung, Institutsteil Pulvermetallurgie und Verbundwerkstoffe, Dresden, 19.1.07 (2007)

J. Eckert: High strength and ductile bulk nanostructured titanium alloys, TMS Annual Meeting and Exhibition, Structural Materials Division Symposium: "Mechanical Behavior of Nanostructured Materials" in Honor of Carl Koch, Orlando/ USA, 26.2.07 (2007)

J. Eckert: Design of ductile bulk metallic glasses and composites, TMS Annual Meeting and Exhibition, Symposium "Bulk Metallic Glasses (IV)", Orlando/ USA, 27.2.07 (2007)

H. Ehrenberg, N.N. Bramnik, K. Nikolowski: In situ examination of Li-ion battery materials, European Crystallographic Meeting, ECM24, Marrakech/ Marokko, 22.-27.8.07 (2007)

H. Hermann: Molecular design of carbon based ultralow-k insulating layers for microelectronic applications, Vortrag am AMD Saxony, Dresden, 20.2.07 (2007)

V. Hoffmann: Development and application of mass spectrometry for current solid state and materials research, Europaeische Plasma Winterkonferenz, Taormina/ Italien, 18.2.07 (2007)

U. Kuehn, U. Siegel, K. Werniewicz, J. Eckert: Herstellung, Eigenschaften und Anwendungen von metallischen Glaesern und Kompositen, Vortrag zum Werkstoffseminar des IWKI Adelboden, 3.-9.3.07 (2007)

U. Kuehn: Herstellung, Eigenschaften und Anwendungen massiver metallischer Glaeser und Komposite , Seminar an der Universitaet Heidelberg, 14.12.07 (2007)

S. Menzel: SAW-Transportsysteme fuer nanoskalige Partikel und Fluessigkeitsmengen, AK Forschung und Entwicklung im Silicon Saxony, Dresden, 6.2.07 (2007)

S. Oswald: Angle-resolved XPS - analytical potential, challenges and limits, Seminar bei FhG-CNT/QIMONDA, Dresden, 24.10.07 (2007)

S. Oswald: Simulation of effects of nanoroughness for ARXPS measurements, AMD Technical Meeting, Dresden, 26.6.07 (2007)

M. Stoica, S. Roth: Bulk amorphous and nanocrystalline soft magnetic alloys, 13th Czech and Slovak Conference on Magnetism, CSMAG'07, Kosice/ Tschechische Republik, 9.-12.7.07 (2007)

M. Stoica, S. Kumar, S. Roth, S. Ram, J. Eckert, G. Vaughan, A.R. Yavari: Crystallization kinetics and magnetic properties of Fe66Nb4B30 bulk metallic glass, ISMANAM 2007 Conference, Korfu/ Griechenland, 26.-30.8.07 (2007)

K. Wetzig: Modern methods of analytical thin layer characterization, Eingeladener Hauptvortrag auf dem 13. Internationalen Symposium "Metallographie 07", Stara Lesni/ Slowakische Republik, 2.-4.5.07 (2007)

K. Wetzig: Moderne Methoden der Duennschichtcharakterisierung, Kolloquium der EFDS, Dresden, 11.12.07 (2007)

Monographs

2014

J. Thomas, T. Gemming: Analytical transmission electron microscopy - An introduction for operators, Springer-Verl.,, 2014, 382 S.

2013

B. Schmidt, K. Wetzig: Ion beams in materials processing and analysis, Springer-Verl., 2013, 418 S.

J. Thomas, T. Gemming: Analytische Transmissionselektronenmikroskopie: Eine Einfuehrung fuer den Praktiker, Springer-Verl., 2013, 363 S.

2009

A.V. Granato; G. Gremaud; F.M. Mazzolai; J. Eckert (eds.): A.V. Granato; G. Gremaud; F.M. Mazzolai; J. Eckert (ed.) 15th International Conference on Internal Friction and Mechanical Spectroscopy, Perugia/ Italien, 20.-25.7.08, Elsevier Science, Amsterdam. Sonderband Materials Science and Engineering A 521-522, 2009, 426 S. S.