Research group

Solidification Processes and Complex Structures


Contact person

Assoc. Prof. Dr. Mariana Calin

Phone:  +49 351 4659 613
Email: m.calin(at)ifw-dresden.de

Team

Projects

Publications


 

Publications of the Metallic Biomaterials group

Journal papers

2017

A. Helth, S. Pilz, T. Kirsten, L. Giebeler, J. Freudenberger, M. Calin, J. Eckert, A. Gebert: Effect ofthermomechanicalprocessing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy, Journal of the Mechanical Behavior of Biomedical Materials 65 (2017), S. 137-150 URL

2016

S. Abdi, M. Boenisch, S. Oswald, M.S. Khoshkhoo, W. Gruner, M. Lorenzetti, U. Wolff, M. Calin, J. Eckert, A. Gebert: Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys, Journal of Materials Research 31 (2016) Nr. 9, S. 1264-1274 URL

S. Abdi, S. Oswald, P.F. Gostin, A. Helth, J. Sort, M.D. Baro, M. Calin, L. Schultz, J. Eckert, A. Gebert: Designing new biocompatible glass-forming Ti75-xZr10NbxSi15 (x=0, 15) alloys: corrosion, passivity, and apatite formation, Journal of Biomedical Materials Research Part B: Applied Biomaterials 104 (2016) Nr. 1, S. 27-38 URL

M. Boenisch, T. Waitz, M. Calin, W. Skrotzki, J. Eckert: Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content, International Journal of Plasticity 85 (2016), S. 190-202 URL

A. Gebert, D. Eigel, P.F. Gostin, V. Hoffmann, M. Uhlemann, A. Helth, S. Pilz, R. Schmidt, M. Calin, M. Goettlicher, M. Rohnke, J. Janek: Oxidation treatments of beta-type Ti-40Nb for biomedical use, Surface and Coatings Technology 302 (2016), S. 88-99 URL

M. Nicoara, C. Locovei, V.A. Serban, R. Parthiban, M. Calin, M. Stoica: New Cu-Free Ti-Based Composites with Residual Amorphous Matrix, Materials 9 (2016) Nr. 5, S. 331/1-14 URL

R. Schmidt, V. Hoffmann, A. Helth, P.F. Gostin, M. Calin, J. Eckert, A. Gebert: Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb, Surface and Coatings Technology 294 (2016), S. 186-193 URL

L.-C. Zhang, H. Attar, M. Calin, J. Eckert: Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications, Materials Technology 31 (2016) Nr. 2, S. 66-76 URL

2015

H. Attar, K.G. Prashanth, A.K. Chaubey, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes, Materials Letters 142 (2015), S. 38-41 URL

H. Attar, K.G. Prashanth, L.-C. Zhang, M. Calin, I.V. Okuloy, S. Scudino, C. Yang, J. Eckert: Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting, Journal of Materials Science and Technology 31 (2015) Nr. 10, S. 1001-1005 URL

H. Attar, L. Loeber, A. Funk, M. Calin, L.C. Zhang, K.G. Prashanth, S. Scudino, Y.S. Zhang, J. Eckert: Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting, Materials Science and Engineering A 625 (2015), S. 350-356 URL

M. Boenisch, M. Calin, J. van Humbeeck, W. Skrotzki, J. Eckert: Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys, Materials Science and Engineering C 48 (2015), S. 511-520 URL

A. Gebert, S. Oswald, A. Helth, A. Voss, P.F. Gostin, M. Rohnke, J. Janek, M. Calin, J. Eckert: Effect of indium (In) on corrosion and passivity of a beta-type Ti-Nb alloy in Ringer's solution, Applied Surface Science 335 (2015), S. 213-222 URL

A. Hynowska, A. Blanquer, E. Pellicer, J. Fornell, S. Surinach, M.D. Baro, A. Gebert, M. Calin, J. Eckert, C. Nogues, E. Ibanez, L. Barrios, J. Sort: Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery, Journal of Biomedical Materials Research Part B: Applied Biomaterials 103 (2015) Nr. 8, S. 1569-1579 URL

A. Panigrahi, M. Boenisch, T. Waitz, E. Schafler, M. Calin, J. Eckert, W. Skrotzki, M. Zehetbauer: Phase transformations and mechanical properties of biocompatible Ti-16.1Nb processed by severe plastic deformation, Journal of Alloys and Compounds 628 (2015), S. 434-441 URL

2014

S. Abdi, M. Samadi Khoshkhoo, O. Shuleshova, M. Boenisch, M. Calin, L. Schultz, J. Eckert, M.D. Baro, J. Sort, A. Gebert: Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti-Zr-Si alloy, Intermetallics 46 (2014), S. 156-163 URL

H. Attar, M. Boenisch, M. Calin, L.-C. Zhang, S. Scudino, J. Eckert: Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties, Acta Materialia 76 (2014), S. 13-22 URL

H. Attar, M. Boenisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert: Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies, Journal of Materials Research 29 (2014), S. 1941-1950 URL

H. Attar, M. Calin, L.C. Zhang, S. Scudino, J. Eckert: Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Materials Science and Engineering A 593 (2014), S. 170-177 URL

M. Boenisch, M. Calin, L. Giebeler, A. Helth, A. Gebert, W. Skrotzki, J. Eckert: Composition-dependent magnitude of atomic shuffles in Ti-Nb martensites, Journal of Applied Crystallography 47 (2014), S. 1374-1379 URL

M. Calin, A. Helth, J.J. Gutierrez Moreno, M. Boenisch, V. Brackmann, L. Giebeler, T. Gemming, C.E. Lekka, A. Gebert, R. Schnettler, J. Eckert: Elastic softening of Beta-type Ti-Nb alloys by indium (In) additions, Journal of the Mechanical Behavior of Biomedical Materials 39 (2014), S. 162-174 URL

A. Helth, P.F. Gostin, S. Oswald, H. Wendrock, U. Wolff, U. Hempel, S. Arnhold, M. Calin, J. Eckert, A. Gebert: Chemical nanoroughening of Ti40Nb surfaces and its effect on human mesenchymal stromal cell response, Journal of Biomedical Materials Research, Part B - Applied Biomaterials 102 B (2014), S. 31-41 URL

S. Oswald, P.-F. Gostin, A. Helth, S. Abdi, L. Giebeler, H. Wendrock, M. Calin, J. Eckert, A. Gebert: XPS and AES sputter-depth profiling at surfaces of biocompatible passivated Ti-based alloys: Concentration quantification considering chemical effects, Surface and Interface Analysis 46 (2014) Nr. 10-11, S. 683-688 URL

K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kuehn, M. Kamaraj, S. Scudino, J. Eckert: Tribological and corrosion properties of Al-12Si produced by selective laser melting, Journal of Materials Research 29 (2014) Nr. 17, S. 2044-2054 URL

K. Zhuravleva, M. Boenisch, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Phase transformations in ball-milled Ti-40Nb and Ti-45Nb powders upon quenching from the beta--phase region, Powder Technology 253 (2014), S. 166-171 URL

2013

M. Boenisch, M. Calin, T. Waitz, A. Panigrahi, M. Zehetbauer, A. Gebert, W. Skrotzki, J. Eckert: Thermal stability and phase transformations of martensitic Ti-Nb alloys, Science and Technology of Advanced Materials 14 (2013), S. 55004/1-9 URL

M. Calin, A. Gebert, A.C. Ghinea, P.F. Gostin, S. Abdi, C. Mickel, J. Eckert: Designing biocompatible Ti-based metallic glasses for implant applications, Materials Science and Engineering C 33 (2013) Nr. 2, S. 875-883 URL

J.W. Cui, M. Calin, J. Eckert, Z.F. Zhang: Tensile fracture dynamics and intrinsic plasticity of metallic glasses, Applied Physics Letters 102 (2013) Nr. 3, S. 31908/1-4 URL

P.F. Gostin, A. Helth, A. Voss, R. Sueptitz, M. Calin, J. Eckert, A. Gebert: Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy, Journal of Biomedical Materials Research Part B 101 (2013) Nr. 2, S. 269-278 URL

W. Xu, D.P. Edwards, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: Promoting nano/ultrafine-duplex structure via accelerated alpha precipitation in a beta-type titanium alloy severely deformed by high-pressure torsion, Scripta Materialia 68 (2013) Nr. 1, S. 67-70 URL

K. Zhuravleva, M. Boenisch, K.G. Prashanth, U. Hempel, A. Helth, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert: Production of porous beta-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing, materials 6 (2013), S. 5700-5712 URL

K. Zhuravleva, S. Scudino, M.S. Khoshkhoo, A. Gebert, M. Calin, L. Schultz, J. Eckert: Mechanical alloying of beta- Type Ti-Nb for biomedical applications, Advanced Engineering Materials 15 (2013) Nr. 4, S. 262-268 URL

K. Zhuravleva, A. Chivu, A. Teresiak, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert: Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications, Materials Science and Engineering C 33 (2013) Nr. 4, S. 2280-2287 URL

2012

F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert: Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites, Journal of Alloys and Compounds 536 (2012) Nr. Suppl. 1, S. S130-S133 URL

M. Calin, M. Stoica, N. Zheng, X. Wang, S. Scudino, A. Gebert, J. Eckert: Thermal stability and crystallization kinetics of Ti40Zr10Cu34Pd14Sn2 bulk metallic glass, Solid State Phenomena 188 (2012), S. 3-10 URL

R. Hermann, H. Hermann, M. Calin, B. Buechner, J. Eckert: Elastic constants of single crystalline beta-Ti70Nb30, Scripta Materialia 66 (2012), S. 198-201 URL

A. Hynowska, E. Pellicer, J. Fornell, S. Gonzalez, N. van Steenberge, S. Surinach, A. Gebert, M. Calin, J. Eckert, M. Dolors Baro, J. Sort: Nanostructured beta-phase Ti–31.0Fe–9.0Sn and sub-my-structured Ti–39.3Nb–13.3Zr–10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances, Materials Science and Engineering C 32 (2012), S. 2418-2425 URL

R.T. Qu, M. Calin, J. Eckert, Z.F. Zhang: Metallic glasses: Notch-insensitive materials, Scripta Materialia 66 (2012), S. 733-736 URL

W. Xu, X. Wu, M. Stoica, M. Calin, U. Kuehn, J. Eckert, K. Xia: On the formation of an ultrafine-duplex structure facilitated by severe shear deformation in a Ti-20Mo beta-type titanium alloy, Acta Materialia 60 (2012) Nr. 13-14, S. 5067-5078 URL

N. Zheng, R.T. Qu, S. Pauly, M. Calin, T. Gemming, Z.F. Zhang, J. Eckert: Design of ductile bulk metallic glasses by adding “soft” atoms, Applied Physics Letters 100 (2012) Nr. 14, S. 141901/1-4 URL

2010

M. Calin, J. Das, K.B. Kim, S. Pauly, N. Mattern, J. Eckert: Enhanced work hardening of Cu-based bulk metallic glass composites by in-situ formed nano-scale heterogeneities, Materials Science Forum 633-634 (2010), S. 665-673 URL

L.C. Zhang, H.B. Lu, M. Calin, E.V. Pereloma, J. Eckert: High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure, Journal of Physics: Conference Series 240 (2010), S. 12103/1-5 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation-induced grain refinement in body-centered cubic Co–Fe alloys upon room temperature compression, Materials Science and Engineering A 527 (2010) Nr. 21-22, S. 5796-5800 URL

N. Zheng, G. Wang, L.C. Zhang, M. Calin, M. Stoica, G. Vaughan, N. Mattern, J. Eckert: In situ high-energy x-ray diffraction observation of structural evolution in a Ti-based bulk metallic glass upon heating, Journal of Materials Research 25 (2010) Nr. 12, S. 2271-2277 URL

2009

W. Xu, X. Wu, R.B. Figueiredo, M. Stoica, M. Calin, J. Eckert, T.G. Langdon, K. Xia: Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion, International Journal of Materials Research 100 (2009) Nr. 12, S. 1662-1667

W. Xu, X. Wu, M. Calin, M. Stoica, J. Eckert, K. Xia: Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability, Scripta Materialia 60 (2009) Nr. 11, S. 1012-1015 URL

2008

J. Eckert, M. Calin, P. Yu, L.C. Zhang, S. Scudino, C. Duhamel: Al-based alloys containing amorphous and nanostructured phases, Reviews on Advanced Materials Science 18 (2008) Nr. 2, S. 169-172 URL

L.C. Zhang, M. Calin, M. Adam, J. Eckert: Crystallization kinetics and viscosity of Cu47Ti33Zr11Ni8X1 (X=Si, Sn) metallic glasses, Reviews on Advanced Materials Science 18 (2008) Nr. 5, S. 429-432 URL

W.Y. Zhang, M. Stoica, H.W. Chang, M. Calin, R. Schierholz, W.C. Chang, J. Eckert: The role of nonmagnetic phases in improving the magnetic properties of devitrified Pr2Fe14B-based nanocomposites, Materials Science and Engineering B 149 (2008) Nr. 1, S. 73-76 URL

2007

M. Calin, L.C. Zhang, J. Eckert: Tailoring of microstructure and mechanical properties of a Ti-based bulk metallic glass-forming alloy, Scripta Materialia 57 (2007) Nr. 12, S. 1101-1104 URL

J. Eckert, J. Das, G. He, M. Calin, K.B. Kim: Ti-base bulk nanostructure-dendrite composites: Microstructure and deformation, Materials Science and Engineering A 449-451 (2007), S. 24-29 URL

J. Eckert, J. Das, K.B. Kim, F. Baier, W. Loeser, M. Calin, Z.F. Zhang, A. Gebert: Deformation behavior of a Ti66Cu8Ni4.8Sn7.2Nb14 nanostructured composite containing ductile dendrites, Journal of Alloys and Compounds 434-435 (2007), S. 13-17 URL

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation behavior and plastic instability of off-stoichiometric Co–Fe alloys, Scripta Materialia 57 (2007) Nr. 8, S. 731-734 URL

L.-C. Zhang, M. Calin, F. Paturaud, C. Mickel, J. Eckert: Deformation-induced nanoscale high-temperature phase separation in Co–Fe alloys at room temperature, Applied Physics Letters 90 (2007) Nr. 20, S. 201908/1-3 URL

L.C. Zhang, M. Calin, M. Branzei, L. Schultz, J. Eckert: Phase stability and consolidation of glassy/nanostructured Al85Ni9Nd4Co2 alloys, Journal of Materials Research 22 (2007) Nr. 5, S. 1145-1155 URL

L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin, J. Eckert: High strength Ti–Fe–Sn ultrafine composites with large plasticity, Scripta Materialia 57 (2007) Nr. 2, S. 101-104 URL

2006

W. Xu, K.B. Kim, J. Das, M. Calin, J. Eckert: Phase stability and its effect on the deformation behavior of Ti–Nb–Ta–In/Cr beta alloys, Scripta Materialia 54 (2006) Nr. 11, S. 1943-1948 URL

W. Xu, K.B. Kim, J. Das, M. Calin, B. Rellinghaus, J. Eckert: Deformation-induced nanostructuring in a Ti–Nb–Ta–In beta alloy, Applied Physics Letters 89 (2006) Nr. 3, S. 31906/1-3 URL

2005

M. Calin, M. Stoica, J. Eckert, A.R. Yavari, L. Schultz: Glass formation and crystallization of Cu47Ti33Zr11Ni8X1 (X = Fe, Si, Sn, Pb) alloys, Materials Science and Engineering A 392 (2005) Nr. 1-2, S. 169-178 URL

2004

M. Calin, H. Grahl, M. Adam, J. Eckert, L. Schultz: Synthesis and thermal stability of ball-milled and melt-quenched amorphous and nanostructured Al-Ni-Nd-Co alloys, Journal of Materials Science 39 (2004) Nr. 16-17, S. 5295-5298

M. Calin, M. Stoica, J. Eckert, A. Reza Yavari, L. Schultz: Phase formation, thermal stability and crystallization behavior of Cu47Ti33Zr11Ni8X1 (X=Fe, Si, Sn, Pb) bulk glassy alloys, Zeitschrift fuer Metallkunde 95 (2004) Nr. 11, S. 970-977

2003

M. Calin, J. Eckert, L. Schultz: High-strength Cu-Ti-rich bulk metallic glasses and nano-composites- Dedicated to Professor Otmar Voehringer on the occasion of his 65th birthday, Zeitschrift fuer Metallkunde 94 (2003) Nr. 5, S. 615-620

M. Calin, J. Eckert, L. Schultz: Improved mechanical behavior of Cu-Ti-based bulk metallic glass by in situ formation of nanoscale precipitates, Scripta Materialia 48 (2003) Nr. 6, S. 653-658 URL

Contributions to collected editions/proceedings

2015

A. Panigrahi, M. Boenisch, T. Waitz, M. Calin, W. Skrotzki, J. Eckert, M. Zehetbauer: Thermal stability of HPT-induced omega phase in biocompatible Ti-16.1Nb alloys, 7th International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM) 2015, 28.6.-3.7.2015, Whistler, BC, Canada, in: Proceedings of the 7th International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM) 2015, 263-268 (2015)

2011

R. Hermann, H. Hermann, M. Calin, G. Gerbeth, B. Buechner, J. Eckert: Magnetic field controlled Ti-Nb single crystal growth and determination of elastic properties, 8th International Pamir Conference on Fundamental and Applied MHD, Borgo/ Corsica, France, 5.-9.9.11, in: Proceedings, CD (2011)

L.C. Zhang, M. Calin, J. Eckert: High-strength titanium base alloys with multiple length-scale microstructure, in: Advances in Mechanical Engineering Research, Vol. 2, David E. Malach (ed.), Nova Science Publishers 2011, 233-251 (2011)

2010

W. Xu, M. Calin, K.B. Kim, J. Das, K. Xia, J. Eckert: Microscopic deformation behavior and microstructural evolution in Ti-Nb-Ta-M (M = In, Ag, or Cr) beta- alloys, 2009 WPI-AIMR Annual Workshop, Miyagi-Zao/ Japan, 1.-6.3.09, in: Proceedings, WPI-AIMR News 10, 10, 111-114 (2010)

Invited talks

2016

M. Calin, M. Boenisch, A. Helth, S. Pilz, L. Giebeler, A. Gebert, W. Skrotzki, J. Eckert: Thermal stability and structural characteristics of metastable beta-type Ti-Nb alloys for implant applications, TMS 2016, Nashville/USA, 16.-18.2.16 (2016)

M. Calin, M. Boenisch, S. Pilz, S. Bera, A. Gebert, J. Eckert: Property optimization of Ti-based biomaterials by structural design, Conference "Diaspora si prietenii 2016", Timisoara/ Romania, 24.-28.4.16 (2016)

M. Calin, M. Boenisch, A. Helth, S. Pilz, R. Schmidt, A. Gebert, T. Waitz, M. Zehetbauer, J. Eckert: Nanostructured SPD-processed Ti-based materials for load-bearing orthopaedic applications, THERMEC 2016, Graz/Austria, 29.5-3.6.16 (2016)

M. Calin, S. Bera, R. Parthiban, N. Zhang, M. Stoica, J. Eckert: Effect of 'soft' atoms (Ga, In) on glass formation and mechanical behavior of Ni-free Ti-based bulk metallic glasses, ISMANAM 2016, Nara/Japan, 3.-8.7.16 (2016)

2015

M. Boenisch, A. Panigrahi, M. Calin, F. Senftleben, M. Stoica, M. Zehetbauer, T. Waitz, W. Skrotzki, J. Eckert: Selected aspects relating to the martensitic transformations in Ti-Nb alloys, BioTiNet Workshop, Universitaet Wien, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, A. Gebert, F.P. Gostin, A. Helth, M. Boenisch, S. Pilz, R. Schmidt, U. Hempel, M. Zehetbauer, J. Eckert: Tailoring the microstructures and surfaces of metastable Ti-based alloys at the nano-scale for implant applications, 1st. International Symposium on Physics of Surfaces and Interfaces, from Fundamentals to Sustainable Applications (SIPS 2015), Antalya/ Turkey, 4.-9.10.15 (2015)

M. Calin, A. Gebert, S. Abdi, A. Helth, S. Pilz, J. Eckert: Property optimization of Ti-based biomaterials by structural design, Colloquium of Materials Science and Enginerring Faculty, University Politehnica Bucharest, Bucharest/ Romania, 11.-12.11.15 (2015)

M. Calin, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Ti-based glassy alloys as prospective biomaterials, Workshop BioTiNet, University of Vienna, Vienna/ Austria, 7.-10.4.15 (2015)

M. Calin, M. Boenisch, A. Helth, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel Ti-Based Metastable Alloys for Biomedical Applications, The 9th International Conference on Materials Science & Engineering - Bramat 2015, Brasov/ Romania, 5.-7.3.15 (2015)

M. Calin, S. Abdi, N. Zheng, F.P. Gostin, A. Gebert, J. Eckert: Compositional-induced structural change and deformation behavior of glassy Ti-Zr-based alloys with potential for biomedical applications, 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15 (2015)

2014

M. Boenisch, M. Calin, A. Panigrahi, T. Waitz, M. Zehetbauer, A. Helth, A. Gebert, L. Giebeler, J. van Humbeeck, W. Skrotzki, J. Eckert: Displacive and diffusional phase transformations in Ti-Nb alloys, Seminar, Forschungsgruppe Physik funktioneller Materialien, Universitaet Wien, Wien/ Oesterreich, 10.3.14 (2014)

M. Calin, N. Zheng, S. Abdi, M. Boenisch, A. Helth, M.D. Baro, F.P. Gostin, A. Gebert, J. Eckert: Design of biocompatible Ti-based amorphous alloys for implant applications, The 15th International Conference of Rapidly Quenched & Metastable Materials (RQ 15 ), Shanghai/ China, 24.-28.8.14 (2014)

M. Calin: Novel Ti-based materials for biomedical applications, Colloquim - Materials Science and Engineering Faculty, University "Politehnica" Bucharest, Bucharest/ Romania, 9.4.14 (2014)

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, N. Zheng, S. Abdi, F.P. Gostin, A. Gebert, J. Eckert: Novel metastable Ti-based structures for orthopedic applications, Internation Conference ROMAT 2014, Bukarest/ Rumaenien, 15.-17.10.14 (2014)

M. Calin: Lessons learned from the coordination of an Initial Training Network (Marie Curie-ITN), Informationsveranstaltung „Foerderung der Mobilitaet und Karriereentwicklung von Nachwuchswissenschaftler/Innen: Marie Sklodowska Curie-Massnahmen in Horizon 2020, TU Dresden, 14.1.14 (2014)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, E.A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable Ti-based alloys at the nanoscale for biomedical applications, 5th International Conference on Materials Science and Technology, RoMat 2014, Bucharest/ Romania, 15.-17.10.14 (2014)

A. Gebert, A. Helth, K. Zhuravleva, M. Boenisch, P.F. Gostin, S. Oswald, M. Calin, J. Eckert: New Ti-Nb-based alloys for implant applications, Indo-German Workshop: Strategies for Improved Bone Replacement Materials and Orthopeadic Implants- Design- Manufactoring- Technologies, TU Dresden, Universitaetsklinikum Carl Gustav Carus, Dresden, 19.-21.2.14 (2014)

2013

M. Calin, M. Boenisch, A. Helth, K. Zhuravleva, S. Abdi, A. Panigrahi, M., Gebert, A. Zehetbauer, J. Eckert: Enhancing the biomechanical capacity of Ti-Nb-based metastable alloys for implant applications, International Conference EUROMAT 2013, Sevilla/ Spain, 8.-13.9.13 (2013)

M. Calin, N. Zheng, A. Helth, M. Boenisch, S. Abdi, A. Gebert, J. Eckert: Titanium-based amorphous alloys as prospective biomaterials, Conference "Advanced Materials and Structures "- AMS 2013, Timisoara/ Romania, 24.-25.10.13 (2013)

M. Calin, N. Zheng, S. Abdi, P.F. Gostin, C. Damm, M.D. Baro, P. Rizzi, A. Gebert, J. Eckert: Biocompatible Ti-based metallic glasses for implant applications, ISMANAM 2013 Conference, Turin/ Italy, 30.6.-5.7.13 (2013)

A. Gebert, A. Helth, K. Zhuravleva, S. Abdi, P.F. Gostin, M. Calin, U. Hempel, R. Medda, A. Cavalcanti-Adam, J. Eckert: Tailoring the surfaces of metastable beta-type Ti-based alloys at the nano-scale for biomedical applications, ISMANAM 2013, Turin/ Italien, 30.5.-5.6.13 (2013)

2012

M. Calin, A. Helth, M. Boenisch, N. Zheng, A. Gebert, J. Eckert: Microstructural design and innovative processing of multicomponent Ti-based alloys for structural applications, Conference: Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania - 'Seeds for the Future', Bukarest/ Rumaenien, 25.-28.9.12 (2012)

M. Calin, N. Zheng, M. Boenisch, A. Helth, A. Gebert, J. Eckert: Strengthening of metastable Ti-based alloys by microstructure design, 4 th International Conference on Materials Science and Technologies ROMAT 2012, Bukarest/ Rumaenien, 17.-19.10.12 (2012)

J. Eckert, L.C. Zhang, T.B. Sercombe, W. Xu, K. Xia, A. Helth, M. Boenisch, M. Calin, A. Gebert, M. Zehetbauer: Advanced structural design and innovative processing of biocompatible Beta Ti-Nb based alloys, Material Science and Engineering Congress (MSE 2012), Darmstadt, 27.9.12 (2012)

A. Helth, K. Zhuravleva, P.F. Gostin, S. Oswald, A. Gebert, M. Calin, U. Hempel, K.S. Lips, A. Cavalcanti-Adam, J. Eckert: Neue Beta-Ti-Nb Legierungen fuer Hartgewebeimplantatanwendungen, 61. Jahrestagung Norddeutsche Orthopaeden- und Unfallchirurgenvereinigung, Hamburg, 16.6.12 (2012)

2011

M. Calin: More women on scientific boards - why does it matter?, DIVERSITY Workshop "Woman in European Materials Science Research Institutes", Corfu/ Greece, 19.-20.5.11 (2011)

M. Calin, N. Zheng, A. Helth, L.C. Zhang, A. Gebert, J. Eckert: Phase transformations and mechanical behavior of glassy/nanostructured Ti-based alloys and their composites, International Conference on Advanced Materials and Structures, Timisoara/ Romania, 27.-28.10.11 (2011)

M. Calin, N. Zheng, A. Helth, F. Gostin, A. Gebert, J. Eckert: Ti-based metallic glasses and composites with improved mechanical properties, Colloquium, Dipartimento di Chimica I.F.M., Universita di Torino, Torino/ Italy, 23.11.11 (2011)

2010

M. Calin: Getting more women in decision-making in materials science (DIVERSITY Project), Colloquim - Dipartimento di Chimica I.F.M., Universita di Torino, Turin/ Italy, 24.-25.11.10 (2010)

M. Calin: Improving the gender diversity management in materials research institutions - DIVERSITY FP7 Project, Balanced Leadership - DIVERSITY Meeting, REPM'10 Workshop, Bled/ Slovenia, 31.8.10 (2010)

M. Calin, A. Gebert: Diversity project out of WomenInNano, European Workshop 'Leadership positions: how accessible are they for women in materials research?', University of Barcelona/ Spain, 19.-21.5.10 (2010)

2009

M. Calin, J. Das, L.-C. Zhang, C. Ghinea, C. Filipoiu, J. Eckert: Strengthening of multi-component Ti-based glass-forming alloys by microstructure design, WPI-Europe Workshop on Metallic Glasses and Related Materials, Grenoble/ France, 25.-28.8.09 (2009)