event photo with many people in the atrium of IFW


Name Scudino, Dr. Sergio
Department Solidification Processes and Complex Structures
Address IFW Dresden
Helmholtzstraße 20
01069 Dresden
Phone Number +49-351-4659-838
Email S.Scudino(at)ifw-dresden.de

Journal Papers

2020 - J. Wang, C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology | Volume: 36 | P. 18-26 | URL

2020 - D. Şopu, S. Scudino, X.L. Bian, C. Gammer, J Eckert
Atomic-scaleorigin of shear band multiplication in heterogeneous metallic glasses
Scripta Materialia | Volume: 178 | P. 57-61 | URL

2019 - O. Ertugrul, T. He, R. Shahid, S. Scudino
Effect of heat treatment on microstructure and mechanical properties of Al 2024 matrix composites reinforced with Ni60Nb40 metallic glass particles
Journal of Alloys and Compounds | Volume: 808 | P. 151732/ | URL

2019 - Ö. Balci, K.G. Prashanth, S. Scudino, M. Somer, J. Eckert
Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
Particulate Science and Technology | Volume: 37 | Issue: 3 | P. 286-291 | URL

2019 - S.A. Rounaghi, D.E.P. Vanpoucke, E. Esmaeili, S. Scudino, Eckert J.
Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
Journal of Alloys and Compounds | Volume: 778 | P. 327-336 | URL

2019 - H. Li, F. Cao, P. Wang, S. Guo, W. Sun, Y. Jia, S. Scudino, Q. Chen, Z. Yu, J. Sun
The Application of Canned Deformation to a Hard-Deformed Spray-Deposited Al-Zn-Mg-Cu Alloy
Journal of Materials Engineering and Performance | Volume: 28 | Issue: 6 | P. 3531-3538 | URL

2019 - T. Lu, W. Chen, B. Li, M. Mao, Z. Li, Y. Liu, S. Scudino
Influence mechanisms of Zr and Fe particle additions on the microstructure and mechanical behavior of squeeze-cast 7075Al hybrid composites
Journal of Alloys and Compounds | Volume: 798 | P. 587-596 | URL

2019 - S.A. Rounaghi, H. Eshghi, S. Scudino, E. Esmaeili, A.-R. Kiani-Rashid, J. Eckert
Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride–carbon nanotube nanocomposites
Physical Chemistry Chemical Physics | Volume: 21 | P. 22121-22131 | URL

2019 - W. Chen, Z. Li, T. Lu, T. He, R. Li, B. Li, B. Wan, Z. Fu, S. Scudino
Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles
Materials Science and Engineering: A | Volume: 762 | P. 138116/ | URL

2019 - T. Lu, W. Chen, Z. Li, T. He, B. Li, R. Li, Z. Fu, S. Scudino
Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles
Journal of Alloys and Compounds | Volume: 801 | P. 473-477 | URL

2019 - Z. Wang, K.G. Prashanth, W.W. Zhang, S. Scudino, J. Eckert
Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
Powder Technology | Volume: 343 | P. 733-737 | URL

2019 - O.O. Salman, C. Gammer, A.K. Chaubey, J. Eckert, S. Scudino
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Materials Science and Engineering A | Volume: 748 | P. 205-212 | URL

2019 - O.O. Salman, F. Brenne, T. Niendorf, J. Eckert, K. Prashanth, T. He, S. Scudino
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Journal of Manufacturing Processes | Volume: 45 | P. 255–261 | URL

2019 - K. Prashanth, S. Scudino
Quasicrystalline Composites by Additive Manufacturing
Key Engineering Materials | Volume: 818 | P. 72-76 | URL

2019 - S. Niyomsoan, D. Leiva, R. Silva, L. Chanchetti, R.N. Shahid, S. Scudino, P. Gargarella, W. Botta
Effects of graphite addition and air exposure on ball-milled Mg–Al alloys for hydrogen storage
International Journal of Hydrogen Energy | Volume: 44 | P. 23257-23266 | URL

2019 - L. Xi, P. Wang, K.G. Prashant, H. Li, H.V. Prykhodko, S. Scudino, I. Kaban
Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
Journal of Alloys and Compounds | Volume: 786 | P. 551-556 | URL

2019 - T. He, O. Ertugrul, N. Ciftci, V. Uhlenwinkel, K. Nielsch, S. Scudino
Effect of particle size ratio on microstructure and mechanical properties of aluminum matrix composites reinforced with Zr48Cu36Ag8Al8 metallic glass particles
Materials Science and Engineering: A | Volume: 742 | P. 517-525 | URL

2019 - H. Li, P. Wang, Y. Jia, Z. Yu, Q. Chen, S. Scudino
Heat Treatable Al‐Zn‐Mg‐Cu Matrix Composites Reinforced With Ni‐Based Metallic Glass Powder
Advanced Engineering Materials | Volume: 21 | Issue: 7 | P. 1900021 /1-8 | URL

2019 - O. Salman, C. Gammer, J. Eckert, M. Salih, E. Abdulsalam, K. Prashanth, S. Scudino
Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties
Materials Today Communications | Volume: 21 | P. 100615/1-7 | URL

2019 - K. Kosiba, D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
Modulating heterogeneity and plasticity in bulkmetallic glasses: Role of interfaces on shear banding
International Journal of Plasticity | Volume: 119 | P. 156-170 | URL

2019 - S. Scudino, R.N. Shahid, J.H. Han, J. Wright
Local elasticity and macroscopic plasticity in homogeneous and heterogeneous bulk metallic glasses
Applied Physics Letters | Volume: 115 | P. 141901/2-6 | URL

2019 - S. Scudino
Mechanism of shear banding during cold rolling of a bulk metallic glass
Journal of Alloys and Compounds | Volume: 773 | P. 883-889 | URL

2018 - R.N. Shahid, S. Scudino
Strengthening of Al-Fe3Al composites by the generation of harmonic structures
Scientific Reports | Volume: 8 | P. 6484/1-12

2018 - T. Lu, S. Scudino, W. Chen, P. Wang, D. Li, M. Mao, L. Kang, Y. Liu, Z. Fu
The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing | Volume: 726 | P. 126-136 | URL

2018 - O.O. Salman, A. Funk, A. Waske, J. Eckert, S. Scudino
Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed
Technologies | Volume: 6 | Issue: 25 | P. 6010025/1-10

2018 - Z. Wang, K.G. Prashanth, K.B. Surreddi, C. Suryanarayana, J. Eckert, S. Scudino
Pressure-assisted sintering of Al–Gd–Ni–Co amorphous alloy powders
Materialia | Volume: 2 | P. 157-166 | URL

2018 - T. Lu, S. Scudino, W. Chen, P. Wang, D. Li, M. Mao, L. Kang, Y. Liu, Z. Fu
The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites
Materials Science and Engineering A | Volume: 726 | P. 126-136 | URL

2018 - P. Wang, L. Deng, K.G. Prashant, S. Pauly, J. Eckert, S. Scudino
Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
Journal of Alloys and Compounds | Volume: 735 | P. 2263-2266 | URL

2018 - S.-Y. Kim, G.-Y. Lee, G.-H. Park, H.-A. Kim, A.-Y. Lee, S. Scudino, K.G. Prashanth, D.-H. Kim, J. Eckert, M.-H. Lee
High strength nanostructured Albased alloys through optimized processing of rapidly quenched amorphous precursors
Scientific Reports | Volume: 8 | P. 1090/1-12

2018 - R.N. Shahid, S. Scudino
Microstructure and Mechanical Behavior of Al-Mg Composites Synthesized by Reactive Sintering
Metals | Volume: 8 | Issue: 10 | P. 762/1-14 | URL

2018 - P. Wang, C. Gammer, F. Brenne, T. Niendorf, J. Eckert, S. Scudino
A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
Composites Part B | Volume: 147 | P. 162-168 | URL

2018 - P. Wang, C. Gammer, F. Brenne, K. Gokuldoss Prahanth, R.G. Mendes, M.H. Ruemmeli, T. Gemming, J. Eckert, S. Scudino
Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Materials Science and Engineering A | Volume: 711 | P. 562-570 | URL

2018 - S. Scudino, J.J. Bian, H. Shakur Shahabi, D. Sopu, J. Sort, J. Eckert, G. Liu
Ductile bulk metallic glass by controlling structural heterogeneities
Scientific Reports | Volume: 8 | P. 9174/1-7

2018 - S. Scudino, D. Sopu
Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
Nano Letters | Volume: 18 | Issue: 2 | P. 1221-1227

2017 - S. Pauly, C. Schricker, S. Scudino, L. Deng, U. Kuehn
Processing a glass-forming Zr-based alloy by selective laser melting
Materials and Design | Volume: 135 | P. 133-141 | URL

2017 - Z. Wang, K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino
Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys
Wear | Volume: 382-383 | P. 78-84 | URL

2017 - S. Scudino, R.N. Shahid, B. Escher, M. Stoica, B.S. Li, J.J. Kruzic
Mapping the cyclic plastic zone to elucidate the mechanisms of crack tip deformation in bulk metallic glasses
Applied Physics Letters | Volume: 110 | Issue: 8 | P. 081903/1-4 | URL

2017 - S. Scudino, K.B. Surredddi
Shear band morphology and fracture behavior of cold-rolled Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass under tensile loading
Journal of Alloys and Compounds | Volume: 708 | P. 722-727 | URL

2017 - P. Ramasamy, R.N. Shahid, S. Scudino, J. Eckert, M. Stoica
Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling
Journal of Alloys and Compounds | Volume: 725 | P. 227-236 | URL

2017 - K.G. Prashanth, S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert
Additive Manufacturing: Reproducibility of Metallic Parts
Technologies | Volume: 5 | Issue: 8 | P. 5010008/1-7 | URL

2017 - K. Kosiba, S. Scudino, R. Kobold, U. Kuehn, A.L. Greer, J. Eckert, S. Pauly
Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
Acta Materialia | Volume: 127 | P. 416-425 | URL

2017 - P. Wang, H.C. Li, K.G. Prashanth, J. Eckert, S. Scudino
Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
Journal of Alloys and Compounds | Volume: 707 | P. 287-290 | URL

2017 - D. Sopu, A. Stukowski, M. Stoica, S. Scudino
Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses
Physical Review Letters | Volume: 119 | Issue: 19 | P. 195503/1-5 | URL

2017 - H. Li, F. Cao, S. Guo, Y. Jia, D. Zhang, Z. Liu, P. Wang, S. Scudino, J. Sun
Effects of Mg and Cu on microstructures and properties of spray-deposited Al-Zn-Mg-Cu alloys
Journal of Alloys and Compounds | Volume: 719 | P. 89-96 | URL

2017 - R.N. Shahid, S. Scudino
Microstructural strengthening by phase transformation in Al-Fe3Al composites
Journal of Alloys and Compounds | Volume: 705 | P. 590-597 | URL

2017 - K.G. Prashanth, S. Scudino, J. Eckert
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Acta Materialia | Volume: 126 | P. 25-35 | URL

2017 - S.A. Rounaghi, D.E.P. Vanpoucke, H. Eshgi, S. Scudino, E. Esmaeili, S. Oswald, S. Eckert
A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics
Journal of Alloys and Compounds | Volume: 729 | P. 240-248 | URL

2017 - Z. Wang, S. Scudino, K.G. Prashanth, J. Eckert
Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
Journal of Alloys and Compounds | Volume: 707 | P. 63-67

2017 - K.G. Prashanth, S. Scudino, T. Maity, J. Das, J. Eckert
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Materials Research Letters | Volume: 5 | Issue: 6 | P. 386-390 | URL

2017 - S.A. Rounaghi, D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study
Physical Chemistry Chemical Physics | Volume: 19 | P. 12414-12424 | URL

2017 - Y.D. Jia, P. Ma, K.G. Prashanth, G. Wang, J. Yi, S. Scudino, F.Y. Cao, J.F. Sun, J. Eckert
Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
Journal of Alloys and Compounds | Volume: 699 | P. 548-553 | URL

2017 - H. Li, F. Cao, S. Guo, Z. Ning, Z. Liu, Y. Jia, S. Scudino, T. Gemming, J. Sun
Microstructures and properties evolution of spray-deposited Al-Zn-Mg-Cu-Zr alloys with scandium addition
Journal of Alloys and Compounds | Volume: 691 | P. 482-488 | URL

2016 - A.K. Chaubey, P.K. Gokuldoss, Z. Wang, S. Scudino, N.K. Mukhopadhyay, J. Eckert
Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles
Technologies | Volume: 4 | Issue: 37 | P. 4040037/1-8

2016 - S. Scudino, K.B. Surreddi, G. Wang, G. Liu
Effect of stress concentration on plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under compressive loading
Materials Letters | Volume: 179 | P. 202-205

2016 - K.G. Prashanth, S. Scudino, A.K. Chaubey, L. Loeber, P. Wang, H. Attar, F.P. Schimansky, F. Pyczak, J. Eckert
Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
Journal of Materials Research | Volume: 31 | Issue: 01 | P. 55-65 | URL

2016 - P. Ma, Z.J. Wei, Y.D. Jia, C.M. Zou, S. Scudino, K.G. Prashanth, Z.S. Yu, S.L. Yang, C.G. Li, J. Eckert
Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si
Journal of Alloys and Compounds | Volume: 688 Part A | P. 88-93

2016 - Y. Jia, F. Cao, P. Ma, S. Scudino, J. Eckert, J. Sun, G. Wang
Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition
Journal of Materials Research | Volume: 31 | Issue: 19 | P. 2948-2956

2016 - S.A. Rounaghi, H. Eshghi, S. Scudino, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R. Kiani Rashid, M. Samadi Khoshkhoo, U. Scheler, J. Eckert
Mechanochemical route to the synthesis of nanostructured Aluminium nitride
Scientific Reports | Volume: 6 | P. 33375/1-11

2016 - P. Ma, Y. Jia, K.G. Prashanth, S. Scudino, Z. Yu, J. Eckert
Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
Journal of Alloys and Compounds | Volume: 657 | P. 430-435 | URL

2016 - K.G. Prashant, S. Scudino, J. Eckert
Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures
Technologies | Volume: 4 | Issue: 38 | P. 4040038/1-9

2016 - J. Suryawanshi, K.G. Prashanth, S. Scudino, J. Eckert, O. Prakash, U. Ramamurty
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Acta Materialia | Volume: 115 | P. 285-294

2016 - H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, B. Escher, S. Menzel, G.B.M. Vaughan, U. Kuehn, J. Eckert
Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction
Acta Materialia | Volume: 111 | P. 187-193 | URL

2016 - Z. Wang, R.T. Qu, K.G. Prashanth, J. Eckert, S. Scudino
Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy
Materials Letters | Volume: 185 | P. 25-25

2016 - S. Khoramkhorshid, M. Alizadeh, A.H. Taghvaei, S. Scudino
Microstructure and mechanical properties of Al-based metal matrix composites reinforced with Al84Gd6Ni7Co3 glassy particles produced by accumulative roll bonding
Materials and Design | Volume: 90 | P. 137-144 | URL

2016 - A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, J. Eckert
Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
Journal of Materials Research | Volume: 31 | Issue: 9 | P. 1229-1236

2015 - K.G. Prashanth, H. Shakur Shahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, S. Scudino
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Additive Manufacturing | Volume: 6 | P. 1-5 | URL

2015 - H. Attar, K.G. Prashanth, A.K. Chaubey, M. Calin, L.C. Zhang, S. Scudino, J. Eckert
Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes
Materials Letters | Volume: 142 | P. 38-41 | URL

2015 - S. Scudino, C. Unterdoerfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, J. Eckert
Additive manufacturing of Cu-10Sn bronze
Materials Letters | Volume: 156 | P. 202-204 | URL

2015 - B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert, J.J. Kruzic
Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass
Materials Science and Engineering A | Volume: 646 | P. 242-248 | URL

2015 - H. Attar, L. Loeber, A. Funk, M. Calin, L.C. Zhang, K.G. Prashanth, S. Scudino, Y.S. Zhang, J. Eckert
Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting
Materials Science and Engineering A | Volume: 625 | P. 350-356 | URL

2015 - H.Y. Jung, S.J. Choi, K.G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuehn, D.H. Kim, K.B. Kim, J. Eckert
Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study
Materials and Design | Volume: 86 | P. 703-708 | URL

2015 - O. Balci, K.G. Prashanth, S. Scudino, D. Agaogullari, I. Duman, M.L. Oevecoglu, V. Uhlenwinkel, J. Eckert
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals | Volume: 5 | Issue: 2 | P. 669-685 | URL

2015 - Z. Wei, P. Ma, H. Wang, C. Zou, S. Scudino, K. Song, K.G. Prashanth, W. Jiang, J. Eckert
The thermal expansion behaviour of SiCp/ Al- 20Si composites solidified under high pressures
Materials and Design | Volume: 65 | P. 387-394 | URL

2015 - Z. Wang, K.G. Prashanth, A.K. Chaubey, L. Loeber, F.P. Schimansky, F. Pyczak, W.W. Zhang, S. Scudino, J. Eckert
Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles
Journal of Alloys and Compounds | Volume: 630 | P. 256-259 | URL

2015 - Z. Whang, R.T. Qu, S. Scudino, B.A. Sun, K.G. Prashanth, D.V. Louzguine-Luzgin, M.W. Chen, Z.F. Zhang, J. Eckert
Hybrid nanostructured aluminum alloy with super-high strength
NPG Asia Materials | Volume: 7 | P. e229/1-8 | URL

2015 - M. Samadi Khoshkhoo, S. Scudino, T. Gemming, J. Thomas, J. Freudenberger, M. Zehetbauer, C.C. Koch, J. Eckert
Nanostructure formation mechanism during in-situ consolidation of copper by room-temperature ball milling
Materials and Design | Volume: 65 | P. 1083-1090 | URL

2015 - F. Cao, Y. Jia, K.G. Prashanth, P. Ma, J. Li, S. Scudino, F. Huang, J. Eckert, J. Sun
Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content
Materials and Design | Volume: 74 | P. 150-156 | URL

2015 - H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, U. Ruett, U. Kuehn, J. Eckert
Structural aspects of elasto-plastic deformation of a Zr-based bulk metallic glass under uniaxial compression
Acta Materialia | Volume: 95 | P. 30-36 | URL

2015 - S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, B. Escher, U. Kuehn, G.B.M. Vaughan, J. Eckert
Structural features of plastic deformation in bulk metallic glasses
Applied Physics Letters | Volume: 106 | Issue: 3 | P. 031903/1-5 | URL

2015 - M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, M. Nicoara, G.B.M. Vaughan, J. Wright, R. Kumar, J. Eckert
Structure evolution of soft magnetic (Fe36Co36B19.2Si4.8Nb4)100-xCux (x=0 and 0.5) bulk glassy alloys
Acta Materialia | Volume: 95 | P. 335-342 | URL

2015 - Z. Wang, S. Scudino, M. Stoica, W. Zhang, J. Eckert
Al-based matrix composites reinforced with short Fe-based metallic glassy fiber
Journal of Alloys and Compounds | Volume: 651 | P. 170-175 | URL

2015 - A.K. Chaubey, S. Scudino, K.G. Prashanth, J. Eckert
Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium
Materials Science and Engineering A | Volume: 625 | P. 46-49 | URL

2015 - S. Scudino, M. Stoica, I. Kaban, K.G. Prashanth, G.B.M. Vaughan, J. Eckert
Length scale-dependent structural relaxation in Zr57.5Ti7.5Nb5Cu12.5Ni10Al7.5 metallic glass
Journal of Alloys and Compounds | Volume: 639 | P. 465-469 | URL

2015 - H. Attar, K.G. Prashanth, L.-C. Zhang, M. Calin, I.V. Okuloy, S. Scudino, C. Yang, J. Eckert
Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting
Journal of Materials Science and Technology | Volume: 31 | Issue: 10 | P. 1001-1005 | URL

2014 - Z. Wang, K.G. Prashanth, S. Scudino, J. He, W.W. Zhang, Y.Y. Li, M. Stoica, G. Vaughan, D.J. Sordelet, J. Eckert
Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders
Intermetallics | Volume: 46 | P. 97-102 | URL

2014 - Z. Wang, J. Tan, B.A. Sun, S. Scudino, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert
Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles
Materials Science and Engineering A | Volume: 600 | P. 53-58 | URL

2014 - N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert
Inverse Hall-Petch like mechanical behaviour in nanophase AlCuFe quasicrystals: A new phenomenon
Acta Physica Polonica A | Volume: 126 | Issue: 2 | P. 543-548 | URL

2014 - Z. Wang, J. Tan, S. Scudino, B.A. Sun, R.T. Qu, J. He, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert
Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses
Advanced Powder Technology | Volume: 25 | Issue: 2 | P. 635-639 | URL

2014 - K. Zhuravleva, M. Boenisch, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert
Phase transformations in ball-milled Ti-40Nb and Ti-45Nb powders upon quenching from the beta--phase region
Powder Technology | Volume: 253 | P. 166-171 | URL

2014 - F. Ali, S. Scudino, M.S. Anwar, R.N. Shahid, V.C. Srivastava, V. Uhlenwinkel, M. Stoica, G. Vaughan, J. Eckert
Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction
Journal of Alloys and Compounds | Volume: 607 | P. 274-279 | URL

2014 - P. Ma, C.M. Zou, H.W. Wang, S. Scudino, B.G. Fu, Z.J. Wei, U. Kuehn, J. Eckert
Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al–20Si alloy
Journal of Alloys and Compounds | Volume: 586 | P. 639-644 | URL

2014 - M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction
Journal of Applied Physics | Volume: 115 | Issue: 5 | P. 053520/1-9 | URL

2014 - P. Donnadieu, C. Pohlmann, S. Scudino, J.-J. Blandin, K.B. Surreddi, J. Eckert
Deformation at ambient and high temperature of in situ Laves phases-ferrite composites
Science and Technology of Advanced Materials | Volume: 15 | P. 034801/1-8 | URL

2014 - S.M. Khoshkhoo, S. Scudino, J. Bednarcik, A. Kauffmann, H. Bahmanpour, J. Freudenberger, R. Scattergood, M.J. Zehetbauer, C.C. Koch, J. Eckert
Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis
Journal of Alloys and Compounds | Volume: 588 | P. 138-143 | URL

2014 - Y. Jia, F. Cao, S. Scudino, P. Ma, H. Li, L. Yu, J. Eckert, J. Sun
Microstructure and thermal expansion behavior of spray-deposited Al-50Si
Materials and Design | Volume: 57 | P. 585-591 | URL

2014 - D. Marko, K.G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert
Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading
Journal of Alloys and Compounds | Volume: 615 | P. S382-S385 | URL

2014 - K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Loeber, Z. Wang, A.K. Chaubey, U. Kuehn, J. Eckert
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
Materials Science and Engineering A | Volume: 590 | P. 153-160 | URL

2014 - H. Shakur Shahabi, S. Scudino, U. Kuehn, J. Eckert
Metallic glass-steel composite with improved compressive plasticity
Materials and Design | Volume: 59 | P. 241-245 | URL

2014 - A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
High-strength ultrafine grain Mg- 7.4% Al alloy synthesized by consolidation of mechanically alloyed powders
Journal of Alloys and Compounds | Volume: 610 | P. 456-461 | URL

2014 - Z. Wang, K.G. Prashanth, S. Scudino, A.K. Chaubey, D.J. Sordelet, W.W. Zhang, Y.Y. Li, J. Eckert
Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles
Journal of Alloys and Compounds | Volume: 586 | Issue: Suppl. 1 | P. S419-S422 | URL

2014 - P. Ma, K.G. Prashanth, S. Scudino, Y. Jia, H. Wang, C. Zou, Z. Wei, J. Eckert
Influence of annealing on mechanical properties of Al- 20Si processed by selective laser melting
metals | Volume: 4 | P. 28-36 | URL

2014 - H. Attar, M. Boenisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert
Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies
Journal of Materials Research | Volume: 29 | P. 1941-1950 | URL

2014 - K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kuehn, M. Kamaraj, S. Scudino, J. Eckert
Tribological and corrosion properties of Al-12Si produced by selective laser melting
Journal of Materials Research | Volume: 29 | Issue: 17 | P. 2044-2054 | URL

2014 - K.G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert
Friction welding of Al-12Si parts produced by selective laser melting
Materials and Design | Volume: 57 | P. 632-637 | URL

2014 - H. Attar, M. Calin, L.C. Zhang, S. Scudino, J. Eckert
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Materials Science and Engineering A | Volume: 593 | P. 170-177 | URL

2014 - H. Attar, M. Boenisch, M. Calin, L.-C. Zhang, S. Scudino, J. Eckert
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
Acta Materialia | Volume: 76 | P. 13-22 | URL

2013 - S. Pauly, L. Loeber, R. Petters, M. Stoica, S. Scudino, U. Kuehn, J. Eckert
Processing metallic glasses by selective laser melting
Materials Today | Volume: 16 | Issue: 1-2 | P. 37-41 | URL

2013 - J.D. Moore, D. Klemm, D. Lindackers, S. Grasemann, R. Traeger, J. Eckert, L. Loeber, S. Scudino, M. Katter, A. Barcza, K.P. Skokov, O. Gutfleisch
Selective laser melting of La(Fe,Co,Si)13 geometries for magnetic refrigeration
Journal of Applied Physics | Volume: 114 | Issue: 4 | P. 043907/1-8 | URL

2013 - F. Ali, S. Scudino, S.M. Gorantla, V.C. Srivastava, H.R. Shahid, V. Uhlenwinkel, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, J. Eckert
Mechanically driven phase transformation in single phase Al62.5Cu25Fe12.5 quasi-crystals: Effect of milling intensity
Acta Materialia | Volume: 61 | P. 3819-3830 | URL

2013 - S. Scudino, J.Y. Kim, K.G. Prashanth, M.H. Lee, B.S. Kim, U. Kuehn, J. Eckert
Production of customized hybrid porous structures by powder metallurgy of Ni59Zr20Ti16Si2Sn3 glassy powders
Journal of Materials Research | Volume: 28 | Issue: 17 | P. 2490-2498 | URL

2013 - M. Samadi Khoshkhoo, S. Scudino, J. Thomas, T. Gemming, H. Wendrock, J. Eckert
Size evaluation of nanostructured materials
Materials Letters | Volume: 108 | P. 343-345 | URL

2013 - K. Zhuravleva, S. Scudino, M.S. Khoshkhoo, A. Gebert, M. Calin, L. Schultz, J. Eckert
Mechanical alloying of beta- Type Ti-Nb for biomedical applications
Advanced Engineering Materials | Volume: 15 | Issue: 4 | P. 262-268

2013 - V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch
Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system
Journal of Alloys and Compounds | Volume: 578 | P. 471-480 | URL

2013 - K. Zhuravleva, M. Boenisch, K.G. Prashanth, U. Hempel, A. Helth, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert
Production of porous beta-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing
Materials | Volume: 6 | P. 5700-5712 | URL

2013 - A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
Synthesis and characterization of nanocrystallineMg-7.4%Al powders produced by mechanical alloying
Metals | Volume: 3 | Issue: 1 | P. 58-68 | URL

2013 - Z. Yan, W. Hao, Y. Hu, K. Song, M. Stoica, S. Scudino, J. Eckert
Evidence for viscous flow nature in Zr60Al15Ni25 metallic glass subjected to cold rolling
Applied Physics Letters | Volume: 103 | P. 021907/1-5 | URL

2013 - D. Lahiri, P.K. Gill, S. Scudino, C. Zhang, V. Singh, J. Karthikeyan, N. Munroe, S. Seal, A. Agarwal
Cold sprayed aluminum based glassy coating: Synthesis, wear and corrosion properties
Surface and Coatings Technology | Volume: 232 | P. 33-40 | URL

2013 - K. Zhuravleva, A. Chivu, A. Teresiak, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert
Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications
Materials Science and Engineering C | Volume: 33 | Issue: 4 | P. 2280-2287 | URL

2013 - N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert
Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals
Applied Physics Letters | Volume: 103 | Issue: 20 | P. 201914/1-5 | URL

2013 - P. Ma, C.M. Zou, H.W. Wang, S. Scudino, K.K. Song, M. Samadi Khoshkhoo, Z.J. Wei, U. Kuehn, J. Eckert
Structure of GP zones in Al-Si matrix composites solidified under high pressure
Materials Letters | Volume: 109 | P. 1-4 | URL

2013 - S.A. Rounaghi, H. Eshghi, A.R. Kiani Rashid, J. Vahdati Khaki, M. Samadi Khoshkhoo, S. Scudino, J. Eckert
Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile
Journal of Solid State Chemistry | Volume: 198 | P. 542-547 | URL

2012 - K.G. Prashanth, S. Scudino, M. Samadi Khoshkhoo, K.B. Surreddi, M. Stoica, G. Vaughan, J. Eckert
Structural and mechanical characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 bulk metallic glass
Materials | Volume: 5 | Issue: 1 | P. 1-11 | URL

2012 - D. Beitelschmidt, S. Scudino, G. K. Prashanth, U. Kuehn, J. Eckert
Mechanical behavior of the cold-rolled Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 metallic glass-quasicrystalline composite
International Journal of Materials Research | Volume: 103 | Issue: 9 | P. 1113-1116

2012 - J.Y. Kim, S. Scudino, U. Kuehn, B.S. Kim, M.H. Lee, J. Eckert
Production and characterization of brass-matrix composites reinforced with Ni59Zr20Ti16Si2Sn3 glassy particles
metals | Volume: 2 | P. 79-94 | URL

2012 - I. Cernickova, L. Roscak, F. Ali, M. Kusy, S. Scudino, R. Cicka, M. Drienovsky, P. Priputen, J. Janovec
Influence of technological parameters on evolution of phases in Al-CMA composites prepared by powder metallurgy
Kovove Materialy (Metallic Materials) | Volume: 50 | Issue: 5 | P. 327-334

2012 - M. Calin, M. Stoica, N. Zheng, X. Wang, S. Scudino, A. Gebert, J. Eckert
Thermal stability and crystallization kinetics of Ti40Zr10Cu34Pd14Sn2 bulk metallic glass
Solid State Phenomena | Volume: 188 | P. 3-10

2012 - A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra, J. Eckert
Effect of particle dispersion on the mechanical behavior of Al-based metal matrix composites reinforced with nanocrystalline Al–Ca intermetallics
Journal of Alloys and Compounds | Volume: 536 | Issue: Suppl. 1 | P. S134-S137 | URL

2012 - F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert
Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites
Journal of Alloys and Compounds | Volume: 536 | Issue: Suppl. 1 | P. S130-S133 | URL

2012 - A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing
Materials Letters | Volume: 79 | P. 145-147 | URL

2011 - S. Scudino, B. Jerliu, K.B. Surreddi, U. Kuehn, J. Eckert
Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass
Journal of Alloys and Compounds | Volume: 509 | Issue: Supplement 1 | P. S128-S130 | URL

2011 - S. Scudino, B. Jerliu, S. Pauly, K.B. Surreddi, U. Kuehn, J. Eckert
Ductile bulk metallic glasses produced through designed heterogeneities
Scripta Materialia | Volume: 65 | Issue: 9 | P. 815-818 | URL

2011 - G. Liu, S. Scudino, R. Li, U. Kuehn, J. Sun, J. Eckert
Coupling effect of primary voids and secondary voids on the ductile fracture of heat-treatable aluminum alloys
Mechanics of Materials | Volume: 43 | Issue: 10 | P. 556-566 | URL

2011 - K.G. Prashanth, S. Kumar, S. Scudino, B.S. Murty, J. Eckert
Fabrication and response of Al70Y16Ni10Co4 glass reinforced metal matrix composites
Materials and Manufacturing Processes | Volume: 26 | Issue: 10 | P. 1242-1247 | URL

2011 - M. Samadi Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert
Grain and crystallite size evaluation of cryomilled pure copper
Journal of Alloys and Compounds | Volume: 509 | Issue: Supplement 1 | P. S343-S347 | URL

2011 - N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, T.P. Yadav, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert
Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling
Philosophical Magazine | Volume: 91 | Issue: 19-21 | P. 2482-2490 | URL

2011 - K.K. Song, S. Pauly, Y. Zhang, S. Scudino, P. Gargarella, K.B. Surreddi, U. Kuehn, J. Eckert
Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass
Intermetallics | Volume: 19 | P. 1394-1398 | URL

2010 - S. Scudino, M. Sakaliyska, K.B. Surreddi, F. Alia, J. Eckert
Structure and mechanical properties of Al–Mg alloys produced by copper mold casting
Journal of Alloys and Compounds | Volume: 504 | Issue: Supplement 1 | P. S483-S486 | URL

2010 - S. Scudino, F. Ali, K.B. Surreddi, K.G. Prashanth, M. Sakaliyska, J. Eckert
Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles
Journal of Physics: Conference Series | Volume: 240 | Issue: 1 | P. 012154/1-4 | URL

2010 - S. Scudino, K.B. Surreddi, G. Wang, J. Eckert
Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints
Scripta Materialia | Volume: 62 | Issue: 10 | P. 750-753 | URL

2010 - K.B. Surreddi, V.C. Srivastava, S. Scudino, M. Sakaliyska, V. Uhlenwinkel, J.S. Kim, J. Eckert
Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering
Journal of Physics: Conference Series | Volume: 240 | P. 012155/1-4 | URL

2010 - K.B. Surreddi, S. Scudino, M. Sakaliyska, K.G. Prashanth, D.J. Sordelet, J. Eckert
Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder
Journal of Alloys and Compounds | Volume: 491 | P. 137-142 | URL

2010 - S. Scudino, K.B. Surreddi, J. Eckert
Mechanical properties of cold-rolled Zr60Ti5Ag5Cu12.5Ni10Al7.5 metallic glass
Physica Status Solidi A | Volume: 207 | P. 1118-1121 | URL

2010 - S. Scudino, K.B. Surreddi, M.S. Khoshkhoo, M. Sakaliyska, G. Wang, J. Eckert
Improved room temperature plasticity of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by channel-die compression
Advanced Engineering Materials | Volume: 12 | Issue: 11 | P. 1123-1126

2010 - V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch
Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming
Materials Science and Engineering A | Volume: 527 | Issue: 10-11 | P. 2747-2758 | URL

2009 - S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert
Mechanical alloying and milling of Al-Mg alloys
Journal of Alloys and Compounds | Volume: 483 | Issue: 1-2 | P. 2-7 | URL

2009 - V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, A. Rosenauer, H.-W. Zoch, J. Eckert
Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures
Transactions of The Indian Institute of Metals | Volume: 62 | Issue: 4-5 | P. 331-335 | URL

2009 - K. Nikolowski, S. Scudino, M. Stoica, K.B. Surreddi, J. Das, J. Eckert
Stress-induced martensitic transformation in a Ti45Zr38Al17 cast rod
Journal of Physics: Conference Series | Volume: 144 | P. 012090/1-4 | URL

2009 - K.G. Prashanth, S. Scudino, K.B. Surreddi, M. Sakaliyska, B.S. Murty, J. Eckert
Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots
Materials Science and Engineering A | Volume: 513-514 | P. 279-285 | URL

2009 - S. Scudino, S. Venkataraman, M. Stoica, K.B. Surreddi, S. Pauly, J. Das, J. Eckert
Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons
Journal of Alloys and Compounds | Volume: 483 | Issue: 1-2 | P. 227-230 | URL

2009 - S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert
Solid-state processing of Al-Mg alloys
Journal of Physics: Conference Series | Volume: 144 | P. 012019/1-4 | URL

2009 - S. Scudino, B. Bartusch, J. Eckert
Viscosity of the supercooled liquid in multi-component Zr-based metallic glasses
Journal of Physics: Conference Series | Volume: 144 | Issue: 1 | P. 012097/1-4 | URL

2009 - S. Scudino, P. Donnadieu, K.B. Surreddi, K. Nikolowski, M. Stoica, J. Eckert
Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys
Intermetallics | Volume: 17 | Issue: 7 | P. 532-539 | URL

2009 - S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi, J. Eckert
Powder metallurgy of Al-based metal matrix composites reinforced with beta - Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties
Acta Materialia | Volume: 57 | P. 4529-4538 | URL

2009 - S. Scudino, K.B. Surreddi, H.V. Nguyen, G. Liu, T. Gemming, M. Sakaliyska, J.S. Kim, J. Vierke, M. Wollgarten, J. Eckert
High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders
Journal of Materials Research | Volume: 24 | Issue: 9 | P. 2909-2916 | URL

2009 - K.B. Surreddi, S. Scudino, H.V. Nguyen, K. Nikolowski, M. Stoica, M. Sakaliyska, J.S. Kim, T. Gemming, J. Vierke, M. Wollgarten, J. Eckert
Spark plasma sintering of gas atomized Al87Ni8La5 amorphous powder
Journal of Physics: Conference Series | Volume: 144 | P. 012079/1-5 | URL

2009 - G.J. Zhang, R.H. Wang, S.P. Yuan, G. Liu, S. Scudino, J. Sun, K.H. Chen
Influence of constituents on the ductile fracture of Al–Cu–Mg alloys: Modulated by the aging treatment
Materials Science and Engineering A | Volume: 526 | P. 171-176 | URL

2009 - S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty, J. Eckert
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy
Acta Materialia | Volume: 57 | Issue: 6 | P. 2029-2039 | URL

2009 - K.G. Prashanth, S. Scudino, B.S. Murty, J. Eckert
Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders
Journal of Alloys and Compounds | Volume: 477 | Issue: 1-2 | P. 171-177 | URL

2008 - S. Scudino, S. Venkataraman, J. Eckert
Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass
Journal of Alloys and Compounds | Volume: 460 | P. 263-267 | URL

2008 - S. Scudino, K.B. Surreddi, S. Sager, M. Sakaliyska, J.S. Kim, W. Loeser, J. Eckert
Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites
Journal of Materials Science | Volume: 43 | Issue: 13 | P. 4518-4526 | URL

2008 - J. Eckert, M. Calin, P. Yu, L.C. Zhang, S. Scudino, C. Duhamel
Al-based alloys containing amorphous and nanostructured phases
Reviews on Advanced Materials Science | Volume: 18 | Issue: 2 | P. 169-172 | URL

2008 - S. Scudino, M. Sakaliyska, M. Stoica, K.B. Surreddi, F. Ali, G. Vaughan, A.R. Yavari, J. Eckert
In-situ X-ray diffraction of mechanically milled - beta-Al3Mg2 powders
Physica Status Solidi - Rapid Research Letters | Volume: 2 | Issue: 6 | P. 272-274 | URL

2008 - S. Scudino, S. Sperling, M. Sakaliyska, C. Thomas, M. Feuerbacher, K.B. Kim, H. Ehrenberg, J. Eckert
Phase transformations in mechanically milled and annealed single-phase beta-Al3Mg2
Acta Materialia | Volume: 56 | Issue: 5 | P. 1136-1143 | URL

2008 - S. Scudino, S. Venkataraman, M. Sakaliyska, J. Eckert
Crystallization behavior and consolidation of ball milled Zr60Ti5Ag5Cu12.5Ni10Al7.5 glassy powders
Journal of Alloys and Compounds | Volume: 456 | Issue: 1-2 | P. 159-162 | URL

2008 - S. Scudino, D.J. Sordelet, J. Eckert
Devitrification of mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders studied by time-resolved X-ray diffraction
Reviews on Advanced Materials Science | Volume: 18 | Issue: 2 | P. 221-224 | URL

2007 - S. Scudino, J. Eckert, X.Y. Yang, D.J. Sordelet, L. Schultz
Conditions for quasicrystal formation from mechanically alloyed Zr-based glassy powders
Intermetallics | Volume: 15 | Issue: 4 | P. 571-582 | URL

2007 - S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Effect of Zr on the crystallization behavior of multi-component Zr-based metallic glasses
Journal of Alloys and Compounds | Volume: 434-435 | Issue: 1-2 | P. 217-220 | URL

2007 - S. Venkataraman, B. Bartusch, C. Mickel, K.B. Kim, J. Das, S. Scudino, M. Stoica, D.J. Sordelet, J. Eckert
Metallic glass formation in the Cu47Ti33Zr11Ni8Si1 alloy
Materials Science and Engineering A | Volume: 444 | Issue: 1-2 | P. 257-264 | URL

2007 - S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Influence of oxygen on the devitrification of Zr–Ti–Nb–Cu–Ni–Al metallic glasses
Materials Science and Engineering A | Volume: 449-451 | P. 493-496 | URL

2007 - N. Van Steenberge, J. Sort, A. Concustell, J. Das, S. Scudino, S. Surinach, J. Eckert, M.D. Baro
Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy
Scripta Materialia | Volume: 56 | Issue: 7 | P. 605-608 | URL

2006 - S. Scudino, J. Das, M. Stoica, K.B. Kim, M. Kusy, J. Eckert
High strength hexagonal structured dendritic phase reinforced Zr–Ti–Ni bulk alloy with enhanced ductility
Applied Physics Letters | Volume: 88 | Issue: 20 | P. 201920/1-3 | URL

2006 - S. Scudino, M. Stoica, N. Mattern, H. Breitzke, K. Lueders, A.R. Yavari, J. Eckert
Is a particular quenched-in short-range order necessary for quasicrystal formation from glassy precursors?
Physica Status Solidi B | Volume: 243 | Issue: 5 | P. R34-R36 | URL

2006 - S. Venkataraman, M. Stoica, S. Scudino, T. Gemming, C. Mickel, U. Kunz, K.B. Kim, L. Schultz, J. Eckert
Revisiting the Cu47Ti33Zr11Ni8Si1 glass-forming alloy
Scripta Materialia | Volume: 54 | Issue: 5 | P. 835-840 | URL

2006 - S. Venkataraman, S. Scudino, J. Eckert, T. Gemming, C. Mickel, L. Schultz, D.J. Sordelet
Nanocrystallization of gas atomized Cu47Ti33Zr11Ni8Si1 metallic glass
Journal of Materials Research | Volume: 21 | Issue: 3 | P. 597-607 | URL

2006 - S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Influence of ball milling on quasicrystal formation in melt-spun Zr-based glassy ribbons
Philosophical Magazine | Volume: 86 | Issue: 3-5 | P. 367-371 | URL

2005 - U. Kuehn, J. Eckert, S. Scudino, A. Gebert, N. Radtke, N. Mattern, L. Schultz
Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al alloys by casting or annealing
Journal of Metastable and Nanocrystalline Materials | Volume: 24-25 | P. 511-514

2005 - S. Scudino, J. Eckert, C. Mickel, P. Schubert-Bischoff, H. Breitzke, K. Lueders, L. Schultz
Quasicrystalline phase formation in Zr–Ti–Nb–Cu–Ni–(Al) metallic glasses
Journal of Alloys and Compounds | Volume: 387 | Issue: 1-2 | P. 269-273 | URL

2005 - S. Scudino, J. Eckert, C. Mickel, L. Schultz
On the amorphous-to-quasicrystalline phase transformation in ball-milled and melt-spun Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 glassy alloys
Journal of Non-Crystalline Solids | Volume: 351 | Issue: 10-11 | P. 856-862 | URL

2004 - S. Scudino, U. Kuehn, L. Schultz, H. Breitzke, K. Lueders, J. Eckert
Formation of quasicrystals in ball-milled amorphous Zr-Ti-Nb-Cu-Ni-Al alloys with different Nb content
Journal of Materials Science | Volume: 39 | Issue: 16-17 | P. 5483-5486

2004 - S. Scudino, C. Mickel, L. Schultz, J. Eckert, X.Y. Yang, D.J. Sordelet
Quasicrystal formation in mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders
Applied Physics Letters | Volume: 85 | Issue: 19 | P. 4349-4351 | URL

2004 - S. Scudino, J. Eckert, L. Schultz
Possible influence of quenched-in nuclei on quasicrystal formation in mechanically alloyed Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 glassy powder
Journal of Materials Research | Volume: 19 | Issue: 8 | P. 2211-2215

2004 - U. Kamachi Mudali, S. Scudino, U. Kuehn, J. Eckert, A. Gebert
Polarisation behaviour of the Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 alloy in different microstructural states in acid solutions
Scripta Materialia | Volume: 50 | Issue: 11 | P. 1379-1384 | URL

2004 - H. Breitzke, K. Lueders, S. Scudino, U. Kuehn, J. Eckert
NMR investigations of medium-range order and quasicrystal formation in Zr59Cu20Al10Ni8Ti3 metallic glass.lf.
Physical Review B | Volume: 70 | P. 014201/1-12 | URL

2004 - S. Scudino, U. Kuehn, L. Schultz, D. Nagahama, K. Hono, J. Eckert
Microstructure evolution upon devitrification and crystallization kinetics of Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 melt-spun glassy ribbon
Journal of Applied Physics | Volume: 95 | Issue: 7 | P. 3397-3404 | URL

2003 - S. Scudino, J. Eckert, U. Kuehn, L. Schultz
Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al melt-spun and ball-milled multicomponent alloys
Journal of Metastable and Nanocrystalline Materials | Volume: 15-16 | P. 67-72

2003 - S. Scudino, J. Eckert, U. Kuehn, L. Schultz
Formation of quasicrystals by partial devitrification of ball-milled amorphous Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5
Applied Physics Letters | Volume: 83 | Issue: 12 | P. 2345-2347 | URL


Contributions to collected editions/proceedings

2018 - S. Scudino, Cambridge: Woodhead Publishing Edited by:Rahul Mitra
6 - Powder metallurgy of Al-based matrix composites reinforced with quasicrystalline particles: processing and mechanical properties
Intermetallic Matrix Composites | Volume: Intermetallic Matrix Composites: Properties and Applications | P. 147-163 | URL

2013 - X. Wang, S. Scudino, J. Eckert
Production and characterization of Al 2024 matrix composites reinforced with beta-Al3Mg2 complex metallic alloy particles
Materials Research Society Symposium Proceedings Materials Research Society Symposium | Volume: MRS Proceedings, 1517 | P. 1-11

2012 - K.G. Prashanth, K.B. Surreddi, S. Scudino, M. Samadi Khoshkhoo, Z. Wang, D.J. Sordelet, J. Eckert
Powder metallurgy of high strength Al90.4 Y4.4 Ni4.3 Co0.9 gas-atomized powder
International Conference on Aluminium Alloys (ICAA 13), Pittsburgh/ USA, 3.-7.6.12 | Volume: Proceedings, H. Weiland; A.D. Rollett; W.A. Cassada (eds.) | P. 1017

2011 - J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales
Mechanical engineering properties of CMAs
| Volume: Complex Metallic Alloys : Fundamentals and Applications, Dubois, Jean-Marie (ed.), Weinheim : Wiley-VCH-Verl. | P. 273-316

2011 - S. Scudino, J. Eckert
Nanocrystalline metals and alloys prepared by mechanical attrition
| Volume: Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. S. H. Whang (ed.) Cambridge: Woodhead Publ., 2011, Capter 3 | P. 59-84

2010 - J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales
Mechanical engineering properties of CMAs
| Volume: Complex Metallic Alloys: Fundamentals and Applications, Dubois, Jean-Marie ; Belin-Ferre, Esther (Ed.), Weinheim: Wiley-VCH | P. 273-315

2009 - M. Sakaliyska, S. Scudino, H.V. Nguyen, K.B. Surreddi, B. Bartusch, F. Ali, J.-S. Kim, J. Eckert
Consolidation and mechanical properties of mechanically alloyed Al-Mg powders
Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, MRS Symposium 2009, Warrendale/ USA | Volume: MRS Symposium Proceedings, M. Palm ; B.P. Bewlay ; M. Takeyama ; J.M.K. Wiezorek ; Y.-H. He (eds), 1128 | P. U05-46

2008 - C. Duhamel, S. Venkataraman, S. Scudino, J. Eckert
Diffusionless transformations
| Volume: Basics of Thermodynamics and Phase Transitions in Complex Intermetallics, Book Series on Complex Metallic Alloys, E. Bellin-Ferre (ed.), Singapur: World Scientific Publisher, 2008, Vol. 1 | P. 119-146

2007 - J. Eckert, S. Scudino
Crystallization of metallic glasses
| Volume: Materials Processing Handbook, J.R.Groza ; J.F. Schackelford ; E.J. Lavernia M.T. Powers (eds.)Taylor and Francis, 2007 | P. 6/1-27

2004 - H. Breitzke, K. Lueders, S. Scudino, J. Eckert, U. Kuehn
Medium-range order and crystallization in Zr59Cu20Al10Ni8Ti3 and Zr57Cu20Al10Ni8Ti5 metallic glasses investigated by NMR
Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA | Volume: MRS Symposium Proceedings; 806 | P. 57-62

2004 - S. Scudino, J. Eckert, U. Kuehn, H. Breitzke, K. Lueders, L. Schultz
Influence of Al on quasicrystal formation in Zr-Ti-Nb-Cu-Ni-Al metallic glasses
Amorphous and Nanocrystalline Metals, Symposium held Dec. 1-4, 2003 Boston/USA | Volume: MRS Symposium Proceedings; 806 | P. 83-88


Invited Talks

2019 - K. Kosiba, S. Scudino, S. Pauly, L. Deng, U. Kühn
Bulk metallic glasses at the Leibniz IFW Dresden: synthesis, structure and properties
Workshop KITECH – IFW – KIMS | Korean Institute of Industrial Technology, Seoul, Incheon
Seoul | South Korea | 02.12.2019 - 03.12.2019

2019 - K. Kosiba, S. Scudino, U. Kühn
Non-equilibrium phases and microstructures
BAM-IFW Workshop | Bundesanstalt für Materialforschung und -prüfung
Berlin | Germany | 25.11.2019 - 26.11.2019

2017 - M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, J. Eckert
Crystallization behavior and soft magnetic properties of (Fe36Co36B19.2Si4.8Nb4)99.5Cu0.5 bulk metallic glass
TMS 2017, The 146th Annual meeting and exhibition, San Diego/ USA, 26.2.-2.3.17

2017 - S. Scudino
Strain analysis of plastically-deformed bulk metallic glasses: challenges and opportunities
PETRA IV: Research with High Energy X-Rays at Ultra-Low Emittance Sources, DESY Hamburg/ Germany, 13.-15.2.17

2017 - J. Krzuc, B. Li, S.H. Xie, H. Shakur Shahabi, S. Scudino, J. Eckert
Improving the fracture toughness of bulk metallic glasses by thermomechanical treatments
TMS 2017, The 146th Annual meeting and exhibition, San Diego/ USA, 26.2.-2.3.17

2016 - S. Pauly, U. Kuehn, S. Scudino, T. Gustmann, C. Schricker, J. Sander, H. Schwab, J. Hufenbach, F. Silze
SLM für Spezialwerkstoffe
Werkstoffsymposium, Dresden/ Germany, 8.-9.12.16

2016 - M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, J. Wright, J. Eckert
Influence of small Cu addition on the crystallization behavior of soft magnetic FeCoBSiNb bulk metallic glass
THERMEC’2016, International Conference on Processing & Manufacturing of Advanced Materiales: Processing, Fabrication, Properties, Applications, Graz/ Austria, 29.5.-3.6.16

2016 - S.A. Rounaghi, S. Scudino, H. Eshghi, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R. Kiani Rashid, M. Samadi Khoshkhoo, U. Scheler, J. Eckert
Mechanochemical Synthesis of Nanostructured Aluminum Nitride
Materials Science & Technology 2016 Conference, Salt Lake City/ USA, 23.-27.10.16

2016 - M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
FeCoSiBNbCu Bulk Metallic Glass with Compressive Deformability
TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16

2016 - S. Pauly, K. Kosiba, S. Scudino, U. Kuehn, A.L. Greer
Designing microstructures of metallic glass matrix composites by flash-annealing
Workshop at Shandong University, Weihai/ China

2016 - J.J. Kruzic, B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert
Designed Heterogeneities Improve the Fracture Reliability of a Zr-based Bulk Metallic Glass
TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16

2016 - M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, D. Sopu, B. Sarac, D. Ehinger, D. Geißler, J. Eckert
Structural modifications of Fe-based BMGs induced by thermal cycling studied by mean of in-situ X-ray diffraction
23rd International Symposium on Metastable, Amorphous and Na, Nara/ Japan, 3.-8.7.16

2015 - M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
(Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties
22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15

2015 - M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
(Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties
Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Munich/ Germany, 10.-11.7.15

2015 - S. Scudino
Effect of mechanical pretreatment on the mechanical behavior of bulk metallic glasses
2nd Industry-Network Meeting – VitriMetTech ITN, “Mechanical Properties of Vitrified Metals'', IFW Dresden, Dresden/ Germany, 14.-17.9.15

2015 - J. Eckert, K.G. Prashanth, S. Scudino, M. Stoica, S. Pauly, U. Kuehn
Selective Laser Melting of Metallic Glasses
The Minerals, Metals and Materials Society Annual Meeting 2015 (TMS 2015), Orlando/ USA, 15.-19.3.15

2015 - M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
Structure evolution and soft magnetic properties of Cu-free and Cu-added Fe-Co-B-Si-Nb BMGs
Advanced Materials and Structures AMS'15, Timisoara/ Romania, 16.-17.10.15

2015 - S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, G. Vaughan, U. Kuehn, J. Eckert
Strain Analysis of Plastically-deformed Bulk Metallic Glasses
22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15

2014 - M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
Compressive behavior of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}99.5Cu0.5 glassy alloy
Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14

2014 - J. Eckert, S. Scudino, D. Beitelschmidt, H.S. Shahabi, U. Kuehn, M. Stoica
Ductilization of metallic glasses by mechanical treatment
TMS 2014, The 143rd Annual Meeting and Exhibition, San Diego, California/ USA, 3/2014

2012 - S. Scudino, H.S. Shahabi, M. Stoica, U. Kuehn, J. Eckert
Enhanced tensile ductility of bulk metallic glasses by customized microstructural heterogeneities
ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12

2012 - S. Scudino
Material efficient design for sustainable energy applications
Korean- German Workshop on Rare Metals, Incheon/ Korea, 8.5.12

2012 - S. Scudino, U. Kuehn, J. Eckert
Mechanical properties of complex metallic alloys
MRS Fall Meeting, Boston/ USA, 25.-30.11.12

2012 - S. Scudino
Powder metallurgy of high-strength Al-based alloys and composites
C-MAC Workshop Grenoble/ France, 21.-22.5.12

2007 - J. Eckert, M. Sakaliyska, K.B. Surreddi, S. Scudino
Complex metallic alloys
14th International Symposium on Metastable and Nano Materials, Korfu/ Griechenland, 28.8.07

2004 - S. Scudino
Quasicrystal formation in Zr-based glassy alloys
Seminarvortrag an der TU Darmstadt, FG Physikalische Metallkunde, 10.11.04

2004 - N. Radtke, U. Kuehn, S. Scudino, J. Eckert, L. Schultz
Microstructure, thermal stability and mechanical properties of slowly cooled Zr-based composites
Seminar-Vortrag am FG Physikalische Metallkunde der TU Darmstadt, 10.11.04

2003 - J. Eckert, U. Kuehn, S. Scudino, N. Mattern
Quasicrystals and related phases in multicomponent alloy systems
MRS Fall Meeting, Boston/USA, 1.-5.12.03


Monograph Contributions

2017 - K.G. Prashanth, S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert, S. Brischetto, P. Maggiore, C.G. Ferro
Additive Manufacturing: Reproducibility of Metallic Parts, in: Additive Manufacturing Technologies and Applications
| P. 137-143 | URL