Journal Papers

H. Chen, X. Yang, D. Gu, Y. Liu, S. Yang, X. Chen, K. Kosiba, Y. Chen, J. Du, K.G. Prashanth, Y. Wang, T. Lu
Unusual deformation substructure and strain hardening in an additively manufactured CoCrFeMnNi high entropy alloy under high-velocity impact loading
Journal of Materials Science & Technology 241, 35-51 (2026) URL

M. Straßheim, C. Salazar Mejía, E. Bykov, T. Niehoff, L. Beyer, J. Freudenberger, R. Hübner, F. Ganss, T. Naumann, J. Wosnitza, T. Gottschall
Magnetocaloric effect in La_1−zCe_z(Fe_0.88−yMn_ySi_0.12)₁₃ with tunable, low transition temperature in high magnetic fields
Journal of Applied Physics 137, 045106/1-9 (2025) URL

Y. Liu, K. Zhang, T. Lu, Y. Hu, H. Chen, D. Wang, M. Zhang, K. Kosiba, Y. Wang
Overcoming the strength-ductility trade-off in additive manufacturing of titanium alloy by in situ fabrication of heterogeneous lamellar microstructure
International Journal of Extreme Manufacturing (2025) URL

Y. Shi, H. Chen, Y. Liu, Y. Wang, K. Kosiba
Exploring Microstructure Evolution in CoCrFeNi High-Entropy Alloy During Laser Powder Bed Fusion: A Molecular Dynamics Simulation
Journal of Alloys and Compounds 1022, 179955/1-49 (2025) URL

K. Sun, X.D. Yuan, N.Z. Zhang, Y.F. Jia, J.C. Tseng, K. Kosiba, Y.D. Jia, C. Shuai, S. Pauly, G. Wang
Non-monotonic fluctuation of structural heterogeneity in metallic glass due to cyclic rapid heat treatment
Applied Physics Letters 126, 021901/1-9 (2025) URL

K. Chen, H. Wan, H. Chen, X. Fang, T. Lu, Y. Wang, Y. Liu, K. Kosiba
Longitudinal wave propagation behavior and dimension effect of origami-inspired metamaterials prepared by laser powder bed fusion
Materials & Design 252, 113781/1-14 (2025) URL

C. Pan, T. Wang, J. Fan, Z. Jin, H. Luo, J. Czarske, R. Kuschmierz, X. Li, K. Kosiba
Machine learning-assisted fabrication for CoCrNi-TiCx composite coatings: Process parameters, microstructure and properties
Ceramics International 51, 16354-16369 (2025) URL

K. Gabrysiak, A.V. Boehm, T. Gustmann, C. Leyens, U. Kühn
Elevated-temperature strength and wear behavior of Al80Mn11Ce9 processed by laser powder bed fusion
Journal of Materials Research and Technology 37, 2327-2337 (2025) URL

W.S. Yang, J.H. Kim, M.J. Kim, S.Y. Yang, Lee A Young, H. Esmaeilpoor, J.H. Kim, K.S. Lee, D.S. Shin
Evolution of magnetocaloric anisotropy in gadolinium wires induced by cold drawing
Journal of Alloys and Compounds 1014, 178657/1-6 (2025) URL

P. Grimm, L. Giebeler, J. Hufenbach
Harnessing centrifugal casting for designing aluminum alloys adapted to laser powder bed fusion
Journal of Materials Research and Technology 1-36 (2025) URL

A.V. Boehm, M.A. Bader, F. Kochta, C. Kunz, U. Kühn, K. Neufeld, L. Giebeler, J.K. Hufenbach
Low-alloyed steel with superior dry abrasive wear resistance and mechanical properties processed via steel mold casting
Wear 566-567, 205756/1-10 (2025) URL

K. Kosiba, W. King, J. Han, B. Paul, D.Y. Kononenko, M. Otto, D. Chernyavsky, J. van den Brink, S. Scudino, J. Hufenbach
Fabrication of filigree parts via laser powder bed fusion: From melt spots to stents
Optics & Laser Technology 180, 111485/1-11 (2025) URL

M. Otto, T. Hultsch, V. Shtefan, V. Hoffmann, S.V. Lamaka, T. Gemming, A. Gebert, J. Fröhlich, M. Zheludkevich, J. Hufenbach
Mechanisms of laminar flow controlled in vitro corrosion of a biodegradable Fe-Mn-C steel
Corrosion Science 249, 112860/1-17 (2025) URL

B. Denkena, J. Hufenbach, B. Bergmann, U. Kühn, V. Kaban, J. Schenzel, S. Worpenberg, C. Kunz
Impact of microstructure and heat treatment on chip formation of Ti-5553 processed by laser powder bed fusion
Production Engineering 1-13 (2025) URL

S. Drescher, A. Kuzmin, E. Welter, J. Freudenberger, A. Smekhova
Component-dependent lattice distortions and atomic scale insights in multi-component Au-Cu-Ni-Pd-Pt based alloys
Nano Research 18, 94907122/1-14 (2025) URL

B. Paul, A. Bahrami, V. Hahn, A. Quade, A. Datye, K. Kosiba, S. Pilz, P. Goldberg, U.D. Schwarz, F. Hempel, J. Hufenbach, K. Nielsch
Atomic Layer Deposition of ZnO Coating on Biodegradable Fe‐Based Alloys
Advanced Materials Interfaces 12, 2400895/1-12 (2025) URL

B. Wang, C. Pan, Z. Jin, H. Zhu, C. Lu, J. Hufenbach, X. Li, K. Kosiba
Enhancing the strength-ductility synergy in CoCrNi medium-entropy alloys via grain boundary segregation engineering
Virtual and Physical Prototyping 20, e2515238/1-17 (2025) URL

D.Y. Kononenko, D. Chernyavsky, W.E. King, J.K. Hufenbach, J. van den Brink, K. Kosiba
Designing materials by laser powder bed fusion with machine learning-driven bi-objective optimization
Journal of Materials Research and Technology 30, 6802-6811 (2024) URL

T. Lu, T. He, A.F. Andreoli, N. Yao, B. Wan, S. Scudino
The origin of good mechanical and soft magnetic properties in a CoFeNi-based high-entropy alloy with hierarchical structure
Materials Characterization 215, 114237/1-13 (2024) URL

J. Cassinerio, M.F. Giordana, E. Zelaya, V. Remich, P. Krooß, J. Freudenberger, T. Niendorf, C.E. Sobrero
On the Impact of γ´ Precipitates on the Transformation Temperatures in Fe–Ni–Co–Al–Ti–B Shape Memory Alloy Wires
Shape Memory and Superelasticity 10, 37-44 (2024) URL

B. Rivkin, F. Akbar, M. Otto, L. Beyer, B. Paul, K. Kosiba, T. Gustmann, J. Hufenbach, M. Medina Sanchez
Remotely Controlled Electrochemical Degradation of Metallic Implants
Small 20, 2307742/1-14 (2024) URL

M. Otto, J. Freudenberger, L. Giebeler, A. Weidner, J. Hufenbach
Developing austenitic high-manganese high-carbon steels for biodegradable stent applications: Microstructural and mechanical studies
Materials Science and Engineering A 892, 145998/1-12 (2024) URL

S. Drescher, S. Seils, T. Boll, A. Kauffmann, M. Heilmaier, J. Freudenberger
Solid solution strengthening in single-phase Au-Cu-Ni-Pd-Pt-based high-entropy alloys
Journal of Alloys and Compounds 1002, 175273/1-13 (2024) URL

A. Bordoloi, S.K. Jena, P. Tiwari, A. Datta, B. Weise, R. Medwal, R.S. Rawat, S. Thota
Charge-ordering breakdown dynamics and ferromagnetic resonance studies of B-site Cu diluted Pr_1‒xSr_xMnO₃
Journal of Physics: Condensed Matter 36, 1-17 (2024) URL

V. Kaban, C. Leyens, J. Hufenbach
Non-equilibrium solidification of undercooled Inconel 718
Journal of Alloys and Compounds 1002, 175205/1-14 (2024) URL

B. Denkena, J. Hufenbach, B. Bergmann, U. Kühn, A. Heckemeyer, S. Worpenberg, C. Kunz
Influence of the process parameters on the microstructure and the machinability of additively manufactured Ti-5553 titanium alloy
CIRP Journal of Manufacturing Science and Technology 55, 42-53 (2024) URL

A. Walnsch, A. Bauer, J. Freudenberger, K. Freiberg, C. Wüstefeld, M. Vollmer, S. Lippmann, T. Niendorf, A. Leineweber, M.J. Kriegel
Thermodynamically Guided Improvement of Fe–Mn–Al–Ni Shape‐Memory Alloys
Advanced Materials 36, 2306794/1-13 (2024) URL

S. Pilz, M. Bönisch, A. Datye, S. Zhang, F. Günther, S. Drescher, U. Kühn, U.D. Schwarz, M. Zimmermann, A. Gebert
Tailoring microstructure and mechanical properties of an LPBF-processed beta Ti-Nb alloy through post-heat treatments
Materials & Design 239, 112799/1-14 (2024) URL

X. Zheng, H. Chen, T. Lu, N. Yao, Y. Wang, Y. Liu, K. Kosiba
Laser additive manufacturing of CoCrNi medium entropy alloy composites reinforced by in-situ nanoprecipitations: Microstructure formation and mechanical properties
Materials Characterization 207, 11350071/1-13 (2024) URL

S. Yang, Y. Liu, H. Chen, Y. Wang, K. Kosiba
Laser powder bed fusion of Fe₆₀(CoCrNiMn)₄₀ medium-entropy alloy with excellent strength-ductility balance
Materials & Design 238, 112720/1-13 (2024) URL

B. Paul, A. Kiel, M. Otto, T. Gemming, V. Hoffmann, L. Giebeler, B. Kaltschmidt, A. Hütten, A. Gebert, B. Kaltschmidt, C. Kaltschmidt, J. Hufenbach
Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application
ACS Applied Bio Materials 7, 839-852 (2024) URL

H. Wan, H. Chen, Y. Wang, X. Fang, Y. Liu, K. Kosiba
Laser additive manufacturing of Miura-origami tube inspired quasi-zero stiffness metamaterial with prominent longitudinal wave propagation
Virtual and Physical Prototyping 19, 2299691/1-19 (2024) URL

Y. Liu, T. Wang, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Impact behaviors of additively manufactured metals and structures: A review
International Journal of Impact Engineering 191, 104992/1-36 (2024) URL

P. Nitzsche, M. Hauser, N. Lehnert, A. Weidner, S. Henkel, M. Wendler, J. Freudenberger, O. Volkova, V. Kräusel, H. Biermann
Quasi-static tensile and fatigue behaviour of a metastable austenitic stainless Cr-Ni-Cu-N steel
Theoretical and Applied Fracture Mechanics 133, 104571/1-10 (2024) URL

V. Shtefan, A. Gebert, M. Hantusch, K. Neufeld, J. Zeisig, L. Giebeler, V. Hoffmann, A. Undisz, U. Kühn, J.K. Hufenbach
How the multi-phase microstructure of a novel tool steel determines its corrosion behaviour in sulphuric acids
Corrosion Science 233, 112091/1-16 (2024) URL

C. Pan, D. Zhu, H. Luo, K. Kosiba, S. Qu, C. Yang, X. Li
Fabrication of high-performance CoCrNi medium entropy alloy by laser powder bed fusion: The effect of grain boundary segregation
Composites Part B: Engineering 253, 110540/1-15 (2023) URL

G. Kirste, J. Freudenberger, S. Wurmehl
Phase transformation in Mn₃Ga considering different degrees of deformation
Acta Materialia 258, 119205/1-10 (2023) URL

J. Zeisig, V. Shtefan, L. Giebeler, U. Kühn, A. Gebert, J. Hufenbach
A Newly Designed High-Strength Tool Steel with High Wear and Corrosion Resistance
Materials 16, 1941/1-15 (2023) URL

P. Birnbaum, S. Pilz, K. Neufeld, A. Kunke
Investigating the Static Recrystallization Behavior of 22MnB5 Manganese–Boron Steel through Stress Relaxation Analysis
Metals 13, 1646/1-16 (2023) URL

S. Das, R.K. Dokala, B. Weise, P.K. Mishra, R. Medwal, R.S. Rawat, S. Thota
Phonon scattering and magnetic manifold switching in (GdSm)CrO₃
Physical Review Materials 7, 084410/1-18 (2023) URL

F. Jürries, L. Beyer, K. Nielsch, T. Woodcock
Targeted hydrolysis and decrepitation of Mn₃AlC precipitates: a route to a novel precursor of rare earth free MnAl–C permanent magnets
Journal of Physics D: Applied Physics 56, 415004/1-13 (2023) URL

H.S. Maurya, R.J. Vikram, K. Kosiba, K. Juhani, F. Sergejev, S. Suwas, K.G. Prashanth
Additive manufacturing of CMCs with bimodal microstructure
Journal of Alloys and Compounds 938, 168416/1-5 (2023) URL

D. Chernyavsky, D. Kononenko, J.H. Han, H.J. Kim, J. van den Brink, K. Kosiba
Machine learning for additive manufacturing: Predicting materials characteristics and their uncertainty
Materials & Design 227, 111699/1-10 (2023) URL

M. R, S. Singh, S. Ghosh, M.S. Seehra, B. Weise, W. Prellier, S. Thota
Magnetic structure and field-induced transitions in the triangular spin-1 antiferromagnet NiNb₂O₆: Observation of a triple point
Physical Review B 108, 224430/1-12 (2023) URL

B. Denkena, B. Bergmann, S. Worpenberg, J. Hufenbach, U. Kühn, C. Kunz
Zerspanbarkeit additiv gefertigter Titanbauteile
VDI-Z 165, 18-20 (2023) URL

J. Ćwik, Y. Koshkid`ko, B. Weise, A. Czernuszewicz
High-field magnetic and magnetocaloric properties of pseudo-binary Er_1−xHo_xNi₂ (x = 0.25–0.75) solid solutions
Journal of Alloys and Compounds 968, 172297/1-9 (2023) URL

X. Luo, T. Song, A. Gebert, K. Neufeld, I. Kaban, H. Ma, W. Cai, H. Lu, D. Li, N. Li, Y. Li, C. Yang
Programming Crystallographic Orientation in Additive‐Manufactured Beta‐Type Titanium Alloy
Advanced Science 10, 2302884/1-11 (2023) URL

M. Wolff, R. Wonneberger, K.E. Freiberg, A. Hertwig, J. Bonse, L. Giebeler, A. Koitzsch, C. Kunz, H. Weber, J. Hufenbach, F.A. Müller, S. Gräf
Formation of laser-induced periodic surface structures on Zr-based bulk metallic glasses with different chemical composition
Surfaces and Interfaces 42, Part A, 103305/1-11 (2023) URL

S.K. Jena, M. Seehra, T. Sarkar, M. Reehuis, A. Hoser, B. Weise, S. Thota
Spin-liquid state with precursor ferromagnetic clusters interacting antiferromagnetically in frustrated glassy tetragonal spinel Zn_0.8Cu_0.2FeMnO₄
Journal of Physics: Condensed Matter 35, 375802/1-18 (2023) URL

W.C. Batalha, R.L. Batalha, K. Kosiba, C.S. Kiminami, P. Gargarella
Effect of scanning strategy on microstructure and mechanical properties of a biocompatible Ti–35Nb–7Zr–5Ta alloy processed by laser-powder bed fusion
Journal of Materials Research 38, 154-164 (2023) URL

H. Chen, K. Kosiba, C. Suryanarayana, T. Lu, Y. Liu, Y. Wang, K.G. Prashanth
Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites
International Materials Reviews 68, 1192-1244 (2023) URL

S. Scudino, J. Han, R.N. Shahid, D. Bieberstein, T. Gemming, J. Wright
Strain fields as local probe for X-ray diffraction tomography: Non-destructive reconstruction of shear band paths in metallic glasses
Journal of Alloys and Compounds 958, 170484/1-8 (2023) URL

T. Prikhna, M. Monastyrov, I. Soldatov, B. Büchner, L. Giebeler, A. Sathyadharma Prasad, O. Ostash, V. Moshchil, V. Podhurska, P. Potapov, V.V. Romaka, K. Neufeld, R. Kluge, T. Serbenyuk, M. Karpets, M. Omelyanenko, A. Wolter-Giraud, S. Ponomaryov
Corrosion-resistant polymer-based nanocomposite materials with a high level of microwave absorption and soft magnetic materials based on iron oxide nanopowder obtained by electroerosion dispersion
Ceramics International 49, 24322-24331 (2023) URL

K. Kosiba, D. Kononenko, D. Chernyavsky, L. Deng, J. Bednarcik, J. Han, J. van den Brink, H. Kim, S. Scudino
Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion
Journal of Alloys and Compounds 940, 168946/1-15 (2023) URL

K. Sun, H. Weber, G. Wang, Y.H. Wu, A.F. Andreoli, J.C. Tseng, J. Shen, B. Zhang, H.R. Jiang, L.M. Xu, X.D. Ma, N.Z. Zhang, Y.F. Jia, K. Kosiba, U. Kühn, S. Pauly
Structural heterogeneity in levitated glassy alloys with different undercoolings
Journal of Alloys and Compounds 947, 169532/1-10 (2023) URL

Q. Badosa, L. Mañosa, E. Vives, A. Planes, B. Weise, L. Beyer, E. Stern-Taulats
Demagnetizing field-induced magnetocaloric effect in Gd
Journal of Applied Physics 134, 113902/1-6 (2023) URL

K. Kosiba, T. Gustmann, J.T. Kim, J. Seok, J. Jung, L. Beyer, S. Scudino, L. Giebeler, J. Han, J. Hufenbach
Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions
Journal of Alloys and Compounds 967, 171773/1-10 (2023) URL

K. Kosiba, D. Wolf, M. Bönisch, K. Neufeld, R. Hühne, T. Gustmann, J. Bednarčík, H. Chen, X. Han, V. Hoffmann, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating
Journal of Materials Science & Technology 156, 1-19 (2023) URL

N. Babacan, S. Pilz, J. Hufenbach, T. Gustmann
Effects of Remelting on the Properties of a Superelastic Cu–Al–Mn Shape Memory Alloy Fabricated by Laser Powder Bed Fusion
Shape Memory and Superelasticity 9, 447-459 (2023) URL

T. Tran, D. Petrov, T. Phan, B. Tu, H. Nhat, H. Tran, B. Weise, J. Cwik, Y. Koshkid'ko, T. Manh, T. Hoang, N. Dang
Investigating the magnetic and magnetocaloric behaviors of LiSm(PO₃)₄
RSC Advances 13, 5753-5761 (2023) URL

S. Drescher, S. Seils, D. Pohl, B. Rellinghaus, A. Kauffmann, M. Heilmaier, J. Freudenberger
Softening by spinodal decomposition in Au-Cu-Ni-Pd-Pt high-entropy alloys
Materials Science and Engineering A 887, 145772/1-11 (2023) URL

B. Yin, L. Li, S. Drescher, S. Seils, S. Nag, J. Freudenberger, W.A. Curtin
Solute misfit and solute interaction effects on strengthening: A case study in AuNi
Acta Materialia 257, 119118/1-10 (2023) URL

S.M. Yang, J. Hufenbach, S. Scudino, P.P. Conway, C. Torres-Sanchez
Can Multifunctionality of Bioresorbable BMGs be Tuned by Controlling Crystallinity?
Key Engineering Materials 967, 131-136 (2023) URL

J. Mich, D. Braig, T. Gustmann, C. Hasse, A. Scholtissek
A comparison of mechanistic models for the combustion of iron microparticles and their application to polydisperse iron-air suspensions
Combustion and Flame 256, 112949/1-13 (2023) URL

C. Sobrero, V. Remich, J. Cassineiro, M. Giordana, G. Abreu Faria, A. Liehr, J. Freudenberger, T. Niendorf, P. Krooß
Functional Properties of Highly Textured Fe–Ni–Co–Al–Ti–B Shape Memory Alloy Wires
Shape Memory and Superelasticity 9, 531–541 (2023) URL

Journal Papers

N. Babacan
Shape Memory Characteristics of Silver-Added Fe–30Mn–6Si Alloy
Transactions of the Indian Institute of Metals 75, 1595–1601 (2022) URL

T. He, S. Gouripriya, P. Tandaiya, T. Lu, H. Lu, N. Ciftci, V. Uhlenwinkel, S. Scudino
Martensite stabilization in bulk metallic glass composites with shape memory crystals
Journal of Alloys and Compounds 929, 167260/1-11 (2022) URL

P. Thirathipviwat, S. Sato, G. Song, J. Bednarcik, K. Nielsch, J. Jung, J. Han
A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system
Scripta Materialia 210, 114470/1-5 (2022) URL

B. Paul, A. Hofmann, S. Weinert, F. Frank, U. Wolff, M. Krautz, J. Edelmann, M.W. Gee, C. Reeps, J. Hufenbach
Effect of blasting treatments on the surface topography and cell adhesion on biodegradable FeMn-based stents processed by laser powder bed fusion
Advanced Engineering Materials 24, 1-17 (2022) URL

M. Seleznev, T. Gustmann, J.M. Friebel, U.A. Peuker, U. Kühn, J. Hufenbach, H. Biermann, A. Weidner
In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring
Additive Manufacturing Letters 3, 100099/1-7 (2022) URL

L. Liu, S. Huang, W. Shi, X. Sun, J. Pang, Q. Lu, Y. Yang, L. Xi, L. Deng, S. Oswald, Y. Yin, L. Liu, L. Ma, O.G. Schmidt, Y. Shi, L. Zhang
Single “Swiss-roll” microelectrode elucidates the critical role of iron substitution in conversion-type oxides
Science Advances 8, eadd6596/1-11 (2022) URL

F. Kochta, U. Kühn, S. Henschel, L. Giebeler, T. Gemming, K. Neufeld, C. Leyens, L. Krüger, J. Hufenbach
Novel Fe-0.3Cr-0.4Mo-1.5Mn–3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading
Materials Science and Engineering A 829, 142156/1-9 (2022) URL

R. Schaarschuch, C.-G. Oertel, A. Pukenas, S. Zhou, G. Cao, J. Freudenberger, W. Gan, E. Maawad, R. Chulist, W. Skrotzki
Low temperature deformation mechanisms of polycrystalline CoZr and Co₃₉Ni₁₁Zr₅₀ B2-type intermetallic compounds
Acta Materialia 223, 117489/1-13 (2022) URL

S. Thota, M.S. Seehra, M.R. Chowdhury, H. Singh, S. Ghosh, S.K. Jena, P. Pramanik, T. Sarkar, R.S. Rawat, R. Medwal, B. Weise
Unraveling the nature of ferrimagnetism and associated exchange interactions in distorted honeycomb Ni₄Nb₂O₉
Physical Review B 106, 134418/1-12 (2022) URL

A. Pukenas, P. Chekhonin, J. Scharnweber, R. Chulist, C. Oertel, J. Freudenberger, W. Skrotzki
TiAl-based semi-finished material produced by reaction annealing of Ti/Al layered composite sheets
Materials Today Communications 30, 103083/1-9 (2022) URL

J. Zeisig, L. Giebeler, A. Gebert, S. Oswald, U. Kühn, J. Hufenbach
Novel Corrosion‐Resistant Tool Steels with Superior Wear Properties
Advanced Engineering Materials 24, 2200293/1-14 (2022) URL

A. Tirunilai, K. Weiss, J. Freudenberger, M. Heilmaier, A. Kauffmann
Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures
Metals 12, 514/1-6 (2022) URL

P. Krooß, C. Lauhoff, T. Gustmann, T. Gemming, C. Sobrero, F. Ewald, F. Brenne, T. Arold, M. Nematolahi, M. Elahinia, J. Thielsch, J. Hufenbach, T. Niendorf
Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation
Shape Memory and Superelasticity 8, 452–462 (2022) URL

B. Paul, A. Lode, A. Placht, A. Voß, S. Pilz, U. Wolff, S. Oswald, A. Gebert, M. Gelinsky, J. Hufenbach
Cell–Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release
ACS Applied Materials & Interfaces 14, 439–451 (2022) URL

T. He, T. Lu, D. Şopu, X. Han, H. Lu, K. Nielsch, J. Eckert, N. Ciftci, V. Uhlenwinkel, K. Kosiba, S. Scudino
Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy
Journal of Materials Science & Technology 114, 42-54 (2022) URL

A. Hariharan, P. Goldberg, T. Gustmann, E. Maawad, S. Pilz, F. Schell, T. Kunze, C. Zwahr, A. Gebert
Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response
Materials & Design 217, 110618/1-19 (2022) URL

D. Schliephake, C. Lopes, Y.M. Eggeler, H. Chen, J. Freudenberger, D. Bayoumy, A.J. Huang, A. Kauffmann
Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy
Journal of Alloys and Compounds 924, 166499/1-11 (2022) URL

P. Wang, S. Yu, J. Shergill, A. Chaubey, J. Eckert, K.G. Prashanth, S. Scudino
Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Acta Metallurgica Sinica (English Letters) 35, 389–396 (2022) URL

K. Kosiba
Thermoplastic embossing device to probe rheological changes of supercooled metallic liquids during rapid heating
Review of Scientific Instruments 93, 033901/1-9 (2022) URL

K. Lu, A. Chauhan, D. Litvinov, A. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy
Journal of Materials Science & Technology 100, 237-245 (2022) URL

R. Batalha, V. Pinotti, O. Alnoaimy, W. Batalha, T. Gustmann, K. Kosiba, S. Pauly, C. Bolfarini, C. Kiminami, P. Gargarella
Microstructure and properties of TiB2-reinforced Ti–₃₅Nb–₇Zr–₅Ta processed by laser-powder bed fusion
Journal of Materials Research 37, 259–271 (2022) URL

U. Gebhardt, T. Gustmann, L. Giebeler, F. Hirsch, J. Hufenbach, M. Kästner
Additively manufactured AlSi10Mg lattices – Potential and limits of modelling as-designed structures
Materials & Design 220, 110796/1-15 (2022) URL

Y. Liu, J. Meng, L. Zhu, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions
Additive Manufacturing 54, 102772/1-16 (2022) URL

H. Maurya, K. Kosiba, K. Juhani, F. Sergejev, K. Prashanth
Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Additive Manufacturing 58, 103013/1-13 (2022) URL

H. Chen, Y. Liu, Y. Wang, Z. Li, D. Wang, K. Kosiba
Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy
Materials & Design 224, 111324/1-12 (2022) URL

S. Pilz, T. Gustmann, F. Günther, M. Zimmermann, U. Kühn, A. Gebert
Controlling the Young’s modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF
Materials & Design 216, 110516/1-11 (2022) URL

J. Freudenberger, F. Thiel, D. Utt, K. Albe, A. Kauffmann, S. Seils, M. Heilmaier
Solid solution strengthening in medium- to high-entropy alloys
Materials Science and Engineering A 861, 144271/1-11 (2022) URL

P. Thirathipviwat, Y. Onuki, G. Song, J. Han, S. Sato
Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy
Journal of Alloys and Compounds 890, 161816/1-8 (2022) URL

L. Feng, J. Freudenberger, K. Nielsch, T.G. Woodcock
Elimination of the non-recrystallised regions in the extruded MnAl-C-Ni magnet using pulverised melt-spun ribbons
Journal of Alloys and Compounds 897, 163248/1-6 (2022) URL

T. Lu, N. Yao, H. Chen, B. Sun, X. Chen, S. Scudino, K. Kosiba, X. Zhang
Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
Additive Manufacturing 56, 102918/1-16 (2022) URL

U. Kühn, J. Sander, K.N. Gabrysiak, L. Giebeler, K. Kosiba, S. Pilz, K. Neufeld, A.V. Boehm, J. Hufenbach
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting
Materials 15, 7266/1-10 (2022) URL

C. Pan, X. Li, H. Luo, K. Kosiba, S. Qu, C. Yang, D. Zhu, C. Zhang
Tuning the strength and ductility balance of a Co₃₂Cr₃₆Ni₃₂ medium entropy alloy fabricated by selective laser melting: Effect of segregations along grain boundaries
Materials Science and Engineering A 840, 14923/1-5 (2022) URL

Z. Wang, X. Lin, L. Wang, H. Yang, Y. Zhou, J.K. Hufenbach, K. Kosiba, T. Zhang, W. Huang
Novel high-strength Al-Cu-Cd alloy fabricated by arc-directed energy deposition: Precipitation behavior of the Cd phase and grain evolution
Additive Manufacturing 60, Part B, 103278/1-15 (2022) URL

H. Chen, T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Materials Science and Engineering A 833, 142512/1-16 (2022) URL

K. Kosiba, K.G. Prashanth, S. Scudino
Phase Formation, Microstructure and Mechanical Properties of Mg₆₇Ag₃₃ as Potential Biomaterial
Metals 11, 461/1-10 (2021) URL

J. Wang, I. Kaban, V. Levytskyi, R. Li, J. Han, M. Stoica, R. Gumeniuk, K. Nielsch
Ultra-high strength Co-Ta-B bulk metallic glasses: glass formation, thermal stability and crystallization
Journal of Alloys and Compounds 860, 158398/1-10 (2021) URL

P. Thirathipviwat, S. Sato, G. Song, J. Bednarcik, K. Nielsch, J. Han
Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system
Materials Science and Engineering A 823, 141775/1-7 (2021) URL

K. Gabrysiak, T. Gustmann, J. Freudenberger, K. Neufeld, L. Giebeler, C. Leyens, U. Kühn
Development and characterization of a metastable Al-Mn-Ce alloy produced by laser powder bed fusion
Additive Manufacturing Letters 1, 100017/1-6 (2021) URL

P. Wang, F.-H. Chen, J. Eckert, S. Pilz, S. Scudino, K.G. Prashanth
Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
Journal of Central South University 28, 1068-1077 (2021) URL

A. Meißner, T. Voigtländer, S.M. Meißner, U. Kühn, S. Schneider, A. Shnirman, G. Weiss
Acoustic properties of metallic glasses at low temperatures: Tunneling systems and their dephasing
Physical Review B 103, 224209/1-11 (2021) URL

H. Chen, D. Gu, Q. Ge, X. Shi, H. Zhang, R. Wang, H. Zhang, K. Kosiba
Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
International Journal of Minerals, Metallurgy and Materials 28, 462-474 (2021) URL

K. Lu, A. Chauhan, A. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading
Acta Materialia 215, 117089/1-12 (2021) URL

M. Romero da Silva, P. Gargarella, A. Plaine, S. Pauly, C. Bolfarini
Influence of oxygen and plastic deformation on the microstructure and the hardness of a Ti–Nb–Ta–Zr–O Gum Metal
Materials Science and Engineering A 828, 142122/1-15 (2021) URL

N. Babacan, S. Pauly, T. Gustmann
Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy
Materials & Design 203, 109625/1-25 (2021) URL

K.N. Gabrysiak, U. Gaitzsch, T. Weißgärber, B. Kieback
Oxidation and Hot Gas Corrosion of Al–Cr–Fe–Ni‐Based High‐Entropy Alloys with Addition of Co and Mo
Advanced Engineering Materials 23, 2100237/1-8 (2021) URL

L. Deng, L. Zhang, K. Kosiba, R. Limbach, L. Wondraczek, G. Wang, D. Gu, U. Kühn, S. Pauly
CuZr-based bulk metallic glass and glass matrix composites fabricated by selective laser melting
Journal of Materials Science & Technology 81, 139-150 (2021) URL

R. He, T. Zhu, P. Ying, J. Chen, L. Giebeler, U. Kühn, J. Grossman, Y. Wang, K. Nielsch
High‐Pressure‐Sintering‐Induced Microstructural Engineering for an Ultimate Phonon Scattering of Thermoelectric Half‐Heusler Compounds
Small 17, 2102045/1-9 (2021) URL

M. Otto, S. Pilz, A. Gebert, U. Kühn, J. Hufenbach
Effect of Build Orientation on the Microstructure, Mechanical and Corrosion Properties of a Biodegradable High Manganese Steel Processed by Laser Powder Bed Fusion
Metals 11, 944/1-13 (2021) URL

F. Kochta, A. Gebert, U. Kühn, S. Oswald, T. Gemming, C. Leyens, J. Hufenbach
Improved corrosion behavior of a novel Fe85Cr4Mo8V2C1 tool steel processed by laser powder bed fusion
Journal of Alloys and Compounds 867, 158887/1-10 (2021) URL

P. Wang, Y. Lei, J. Qi, S. Yu, R. Setchi, M. Wu, J. Eckert, H. Li, S. Scudino
Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5 Mg-1Si Alloy Manufactured by Selective Laser Melting
Materials 14, 7048/1-11 (2021) URL

T. He, N. Ciftci, V. Uhlenwinkel, S. Scudino
Synthesis of Bulk Zr₄₈Cu₃₆Al₈Ag₈ Metallic Glass by Hot Pressing of Amorphous Powders
Journal of Manufacturing and Materials Processing 5, 23/1-13 (2021) URL

S. Chen, T. He, X. Wu, G. Lei
Synergistic effect of carbides and residual strain on the mechanical behavior of Ni-17Mo-7Cr superalloy made by wire-arc additive manufacturing
Materials Letters 287, 129291/1-5 (2021) URL

L. Beyer, B. Weise, J. Freudenberger, J. Hufenbach, T. Gottschall, M. Krautz
Evaluation of the effective temperature change in Gd-based composite wires assessed by static and pulsed-field magnetic measurements
Journal of Magnetism and Magnetic Materials 536, 168115/1-6 (2021) URL

Z. Wang, S.Y. Tang, S. Scudino, Y.P. Ivanov, R.T. Qu, D. Wang, C. Yang, W.W. Zhang, A.L. Greer, J. Eckert, K.G. Prashanth
Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off
Additive Manufacturing 37, 101725/1-14 (2021) URL

N. Babacan, F. Kochta, V. Hoffmann, T. Gemming, U. Kühn, L. Giebeler, A. Gebert, J. Hufenbach
Effect of silver additions on the microstructure, mechanical properties and corrosion behavior of biodegradable Fe-30Mn-6Si
Materials Today Communications 28, 102689/1-11 (2021) URL

H. Chen, D. D. Gu, H. Zhang, L. Xi, T. Lu, L. Deng, U. Kühn, K. Kosiba
Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
Journal of Materials Processing Technology 289, 116959/1-14 (2021) URL

A. de Araujo, S. Pauly, R. Batalha, F. Coury, C. Kiminami, V. Uhlenwinkel, P. Gargarella
Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility
Additive Manufacturing 41, 101960/1-16 (2021) URL

H. Chen, D. Gu, L. Deng, T. Lu, U. Kühn, K. Kosiba
Laser additive manufactured high-performance Fe-based composites with unique strengthening structure
Journal of Materials Science & Technology 89, 242-252 (2021) URL

R. Ali, F. Ali, A. Zahoor, R. Shahid, N. Tariq, T. He, M. Shahzad, Z. Asghar, A. Shah, A. Mahmood, H. Awais
Effect of sintering path on the microstructural and mechanical behavior of aluminum matrix composite reinforced with pre-synthesized Al/Cu core-shell particles
Journal of Alloys and Compounds 889, 161531/1-10 (2021) URL

S. Chen, T. He, L. Zhao, D. Tsang
Microstructure and mechanical response of gas tungsten arc welded joints comprising a UNS N10003 alloy with different heat inputs
Materials Science and Engineering A 803, 140494 (2021) URL

N. Soltani, A.D.C. Permana, S. Donath, D. Mikhailova
Dealloying approach for the rapid synthesis of Sn-based intermetallic electrodes for lithium-ion batteries
Materials Today Communications 29, 102965/ (2021) URL

K. Sun, L.M. Xu, H. Weber, G. Wang, J.C. Tseng, J. Shen, S.W. Wu, X.L. Bian, K. Kosiba, U. Kühn, S. Pauly
A refined local structure in a metallic glass tailored via flash-annealing
Materials Characterization 178, 111214/1-10 (2021) URL

T. Lu, T. He, P. Zhao, K. Sun, A.F. Andreoli, H. Chen, W. Chen, Z. Fu, S. Scudino
Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl_0.25Mn_0.25 high-entropy alloy through cold rolling and annealing treatment
Journal of Materials Processing Technology 289, 116945/1-11 (2021) URL

N. Babacan, E. Yurtkuran, A. Balci, M. Bieda-Niemiec, A. Jarzębska
Effects of Non-isothermal Aging on Microstructure and Mechanical Properties of WE43 Alloy
Journal of Materials Engineering and Performance 30, 7909–7916 (2021) URL

M. Costa Valente, T. Oliveira, S. Kreve, R. Batalha, D. Oliveira, S. Pauly, C. Bolfarini, L. Bachmann, A. Reis
Analysis of the mechanical and physicochemical properties of Ti‐6Al‐4 V discs obtained by selective laser melting and subtractive manufacturing method
Journal of Biomedical Materials Research Part B-Applied Biomaterials 109, 420-427 (2021) URL

H. Thota, R. Jeyaraam, L. Bairi, A. Tirunilai, A. Kauffmann, J. Freudenberger, M. Heilmaier, S. Mandal, S. Vadlamani
Grain boundary engineering and its implications on corrosion behavior of equiatomic CoCrFeMnNi high entropy alloy
Journal of Alloys and Compounds 888, 161500/1-15 (2021) URL

P. Wang, J.F. Qi, Z.W. Chen, C.S. Lao, T.B. He, T.W. Lu, P. Gargarella, S. Scudino
Microstructure and mechanical properties of novel high-entropy alloy particle reinforced aluminum matrix composites fabricated by selective laser melting
Journal of Alloys and Compounds 868, 159197/1-5 (2021) URL

K. Lu, A. Chauhan, M. Walter, A. Tirunilai, M. Schneider, G. Laplanche, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Scripta Materialia 194, 113667/1-5 (2021) URL

S. Chen, Q. Liu, T. He, G. Lei
Inhomogeneity of microstructure and mechanics of laser welded CoCrFeNiAl_0.3 high entropy alloy
Materials Letters 301, 130269/1-3 (2021) URL

P. Xue, Y. Huang, S. Pauly, F. Guo, Y. Ren, S. Jiang, F. Guo, S. Guo, H. Fan, Z. Ning, J. Sun
Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction
Journal of Alloys and Compounds 871, 159570/1-9 (2021) URL

F.C. Ewald, F. Brenne, T. Gustmann, M. Vollmer, P. Krooß, T. Niendorf
Laser Powder Bed Fusion Processing of Fe-Mn-Al-Ni Shape Memory Alloy—On the Effect of Elevated Platform Temperatures
Metals 11, 185/1-9 (2021) URL

H. Zhang, D. D. Gu, C. Ma, M. Guo, J. Yang, H. Zhang, H. Chen, C. Li, K. Svynarenko, K. Kosiba
Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
Materials Science and Engineering A 802, 140431/1-12 (2021) URL

M. da Silva, P. Gargarella, A. Plaine, J. Zeisig, S. Pauly, U. Kühn, C. Bolfarini
Microstructural evolution and properties of a Ti-Nb-Ta-Zr-O prepared by high-pressure torsion
Journal of Alloys and Compounds 864, 158828/1-13 (2021) URL

L. Deng, K. Kosiba, R. Limbach, L. Wondraczek, U. Kühn, S. Pauly
Plastic deformation of a Zr-based bulk metallic glass fabricated by selective laser melting
Journal of Materials Science & Technology 60, 139-146 (2021) URL

U. Gebhardt, M. Kästner, J. Hufenbach, U. Kühn, M. Berner, S. Holtzhausen
Virtual Testing of Geometrically Imperfect Additively Manufactured Lattice Structures
Proceedings in Applied Mathematics and Mechanics (PAMM) 20, e202000090/1-2 (2021) URL

J. Kimme, J. Zeisig, A. Fröhlich, V. Kräusel
Technology Innovation for the Manual Laser Cladding of High-Alloy Tool Steels
Metals 11, 1820/1-10 (2021) URL

R. Ali, M. Akhtar, A. Zahoor, F. Ali, S. Scudino, R. Shahid, N. Tariq, V. Srivastava, V. Uhlenwinkel, B. Hasan, J. Eckert
Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals
Materials Chemistry and Physics 251, 123071/1-6 (2020) URL

P. Thirathipviwat, G. Song, J. Bednarcik, U. Kühn, T. Gemming, K. Nielsch, J. Han
Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems
Progress in Natural Science: Materials International 30, 545-551 (2020) URL

K. Kosiba, L. Deng, S. Scudino
Viscous Flow of Supercooled Liquid in a Zr-Based Bulk Metallic Glass Synthesized by Additive Manufacturing
Materials 13, 3803/1-10 (2020) URL

J. Bednarčík, K. Kosiba, S. Pauly, A. Rothkirch
In situ XRD Study of Rapid Crystallization of Metallic Glasses Using Novel Experimental Setup for Flash-Annealing
Acta Physica Polonica A 137, 852-854 (2020) URL

Y. Jia, L. Zhang, P. Ma, S. Scudino, G. Wang, J. Yi, J. Eckert, K. Prashanth
Thermal expansion behavior of Al–χSi alloys fabricated using selective laser melting
Progress in Additive Manufacturing 5, 247–257 (2020) URL

Z. Wang, S. Scudino, J. Eckert, K.G. Prashanth
Selective laser melting of nanostructured Al-Y-Ni-Co alloy
Manufacturing Letters 25, 21-25 (2020) URL

P. Xue, Y. Huang, S. Pauly, S. Jiang, S. Guo, Z. Ning, J. Sun
Long-term room-temperature aging treatment of a bulk metallic glass composite
Journal of Alloys and Compounds 820, 153165/1-7 (2020) URL

D. Shin, C.H. Lee, U. Kühn, S.C. Lee, S.J. Park, H. Schwab, S. Scudino, K. Kosiba
Optimizing Laser Powder Bed Fusion of Ti-5Al-5V-5Mo-3Cr by Artificial Intelligence
Journal of Alloys and Compounds 158018/1-9 (2020) URL

J. Hufenbach, J. Sander, F. Kochta, S. Pilz, A. Voß, U. Kühn, A. Gebert
Effect of Selective Laser Melting on Microstructure, Mechanical, and Corrosion Properties of Biodegradable FeMnCS for Implant Applications
Advanced Engineering Materials 22, 2000182/1-8 (2020) URL

K. Kosiba, S. Scudino, J. Bednarčík, J.J. Bian, L. Gang, U. Kühn, S. Pauly
Guiding shear bands in bulk metallic glasses using stress fields: A perspective from the activation of flow units
Physical Review B 102, 134113/1-8 (2020) URL

C. Yi, Z. Ke, L. Zhang, J. Tan, Y. Jiang, Z. He
Antibacterial Ti-Cu alloy with enhanced mechanical properties as implant applications
Materials Research Express 7, 105404/1-10 (2020) URL

L. Feng, J. Freudenberger, T. Mix, K. Nielsch, T.G. Woodcock
Rare-Earth-Free MnAl-C-Ni Permanent Magnets Produced by Extrusion of Powder Milled from Bulk
Acta Materialia 199, 155-168 (2020) URL

R. Schaarschuch, C. Oertel, G. Cao, J. Freudenberger, W. Skrotzki
Low temperature deformation mechanisms of single crystalline intermetallic compound YAg
Scripta Materialia 186, 95-98 (2020) URL

J. Orava, K. Kosiba, X. Han, I. Soldatov, O. Gutowski, O. Ivashko, A.-C. Dippel, M. v. Zimmermann, A. Rothkirch, J. Bednarcik, U. Kühn, H. Siegel, S. Ziller, A. Horst, K. Peukert, R. Voigtländer, D. Lindackers, I. Kaban
Fast-current-heating devices to study in situ phase formation in metallic glasses by using high-energy synchrotron radiation
Review of Scientific Instruments 91, 073901/1-8 (2020) URL

K. Lu, A. Chauhan, D. Litvinov, M. Walter, A. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
High-temperature low cycle fatigue behavior of an equiatomic CoCrFeMnNi high-entropy alloy
Materials Science and Engineering A 791, 139781/1-12 (2020) URL

J. Wang, C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology 36, 18-26 (2020) URL

L. Deng, A. Gebert, L. Zhang, H.Y. Chen, D. Gu, U. Kühn, M. Zimmermann, K. Kosiba, S. Pauly
Mechanical performance and corrosion behaviour of Zr-based bulk metallic glass produced by selective laser melting
Materials & Design 189, 108532/1-11 (2020) URL

A. Tirunilai, T. Hanemann, C. Reinhart, V. Tschan, K. Weiss, G. Laplanche, J. Freudenberger, M. Heilmaier, A. Kauffmann
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Materials Science and Engineering A 783, 139290/1-10 (2020) URL

R. Batalha, W. Batalha, L. Deng, T. Gustmann, S. Pauly, C. Kiminami, P. Gargarella
Processing a biocompatible Ti–35Nb–7Zr–5Ta alloy by selective laser melting
Journal of Materials Research 35, 1143-1153 (2020) URL

T. He, T. Lu, N. Ciftci, V. Uhlenwinkel, W. Chen, K. Nielsch, S. Scudino
Interfacial characteristics and mechanical asymmetry in Al2024 matrix composites containing Fe-based metallic glass particles
Materials Science and Engineering A 793, 139971 (2020) URL

T. He, S. Chen, T. Lu, P. Zhao, W. Chen, S. Scudino
High-strength and ductile ultrafine-grained Al–Y–Ni–Co alloy for high-temperature applications
Journal of Alloys and Compounds 848, 156655/1-7 (2020) URL

B. Wan, W. Li, F. Liu, T. Lu, S. Jin, K. Wang, A. Yi, J. Tian, W. Chen
Determination of fluoride component in the multifunctional refining flux used for recycling aluminum scrap
Journal of Materials Research and Technology 9, 3447-3459 (2020) URL

M. Krautz, L. Beyer, A. Funk, A. Waske, B. Weise, J. Freudenberger, T. Gottschall
Predicting the dominating factors during heat transfer in magnetocaloric composite wires
Materials & Design 193, 108832/1-7 (2020) URL

T. Lappan, A. Franz, H. Schwab, U. Kühn, S. Eckert, K. Eckert, S. Heitkam
X-ray particle tracking velocimetry in liquid foam flow
Soft Matter 16, 2093-2103 (2020) URL

C. Ebner, S. Pauly, J. Eckert, C. Rentenberger
Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass
Materials Science and Engineering A 773, 138848/1-9 (2020) URL

B. Li, S. Scudino, B. Gludovatz, J. Kruzic
Role of pre-existing shear band morphology in controlling the fracture behavior of a Zr–Ti–Cu–Ni–Al bulk metallic glass
Materials Science and Engineering A 786, 139396/1-11 (2020) URL

T. Lu, T. He, Z. Li, H. Chen, X. Han, Z. Fu, W. Chen
Microstructure, mechanical properties and machinability of particulate reinforced Al matrix composites: a comparative study between SiC particles and high-entropy alloy particles
Journal of Materials Research and Technology 9, 13646-13660 (2020) URL

T. Lu, T. He, W. Chen, H. Chen, Y. Liu, B. Wan, Z. Fu, S. Scudino
Effect of solution time on the microstructure, precipitation behavior and mechanical properties of (Co_0.5NiFeCrTi_0.5 + SiC)_p/7075Al hybrid composite
Materials Characterization 170, 110702/1-12 (2020) URL

H. Chen, D. Gu, K. Kosiba, T. Lu, L. Deng, L. Xi, U. Kühn
Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing
Additive Manufacturing 35, 101195/1-10 (2020) URL

K. Kosiba, A. Rothkirch, J. Han, L. Deng, B. Escher, G. Wang, U. Kühn, J. Bednarcik
Phase formation of a biocompatible Ti-based alloy under kinetic constraints studied via in-situ high-energy X-ray diffraction
Progress in Natural Science: Materials International 30, ‏ 432-436 (2020) URL

R. Batalha, S. Pauly, U. Kühn, K. Kosiba, C. Bolfarini, C. Kiminami, P. Gargarella
Oligocrystalline microstructure in an additively manufactured biocompatible Ti-Nb-Zr-Ta alloy
Materials Letters 262, 127149/1-3 (2020) URL

K. Sun, G. Wang, Y. Wang, H. Chen, L. Yan, S. Pauly, Y. Wu, H. Weber, Q. Wang, B. Huang, Y. Jia, J. Yi, Q. Zhai
Structural rejuvenation and relaxation of a metallic glass induced by ion irradiation
Scripta Materialia 180, 34-39 (2020) URL

N. Pérez, C. Wolf, A. Kunzmann, J. Freudenberger, M. Krautz, B. Weise, K. Nielsch, G. Schierning
Entropy of Conduction Electrons from Transport Experiments
Entropy 22, 244/1-8 (2020) URL

S. Moradi, E. Naz, G. Li, N. Bandari, V. Bandari, F. Zhu, H. Wendrock, O.G. Schmidt
Highly Symmetric and Extremely Compact Multiple Winding Microtubes by a Dry Rolling Mechanism
Advanced Materials Interfaces 7, 1902048/1-9 (2020) URL

A. Tirunilai, T. Hanemann, K.P. Weiss, J. Freudenberger, M. Heilmaier, A. Kauffmann
Dislocation-based serrated plastic flow of high entropy alloys at cryogenic temperatures
Acta Materialia 200, 980-991 (2020) URL

M. da Silva, P. Gargarella, A. Plaine, R. Contieri, S. Pauly, U. Kühn, C. Bolfarini
Influence of the deformation rate on phase stability and mechanical properties of a Ti–29Nb–13Ta–4.6Zr–xO alloy analyzed by in situ high-energy X-ray diffraction during compression tests
Journal of Materials Research 35, 1777-1789 (2020) URL

P. Wang, J. Eckert, K. Prashanth, M. Wu, I. Kaban, L. Xi, S. Scudino
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Transactions of Nonferrous Metals Society of China 30, 2001-2034 (2020) URL

F. Jürries, J. Freudenberger, K. Nielsch, T.G. Woodcock
The Influence of Cu-Additions on the Microstructure, Mechanical and Magnetic Properties of MnAl-C Alloys
Scientific Reports 10, 7897/1-10 (2020) URL

P. Wang, A. Gebert, L. Yan, H. Li, C. Lao, Z. Chen, K. Kosiba, U. Kühn, S. Scudino
Corrosion of Al-3.5Cu-1.5 Mg–1Si alloy prepared by selective laser melting and heat treatment
Intermetallics 124, 106871/1-6 (2020) URL

C. Wieser, W. Hügel, S. Martin, J. Freudenberger, A. Leineweber
Stabilization of the ζ-Cu₁₀Sn₃ Phase by Ni at Soldering-Relevant Temperatures
Journal of Electronic Materials 49, 3609-3623 (2020) URL

Contributions to collected editions/proceedings

O. Al-Noaimy, B. AlMangour, E.H. Abdulsalam, J. Eckert, K.G. Prashanth, A.K. Chaubey, S. Scudino, S.H. Alzuhairyh
Tribological Behavior of 316L Stainless Steel Manufactured by Selective Laser Melting
Proceedings of 4th International Conference on Architectural & Civil Engineering Sciences 4th International Conference on Architectural & Civil Engineering Sciences , 142-146, (2023), URL

Invited Talks

J. Hufenbach
Design of novel high-carbon steels for additive manufacturing
Scientific colloquium of the Collaborative Research Centre / Transregio (TRR) 375 | Collaborative Research Centre / Transregio (TRR) 375
Kaiserslautern, Germany, 04.06.2025

J. Hufenbach, B. Paul, K. Kosiba
Werkstoffentwicklung für die additive Fertigung
effiPrint Frühjahrsveranstaltung | Professur für Umformtechnik, Technische Universität Chemnitz
Chemnitz, Germany, 14.03.2024 - 14.03.2024

M. Otto
Optimisation of Fe-Mn-C steels for biodegradable vascular implant applications
CIC nanoGUNE-Seminar | CIC nanoGUNE
Donastia-San Sebastian, Spain, 27.05.2024

K. Kosiba, J. Bednarčík, S. Scudino
HEXRD mapping for advanced characterization of metals : 2D strain tensor and phase distribution
DESY Photon Science Users' Meeting | Deutsches Elektronen-Synchrotron (DESY)
Hamburg, Germany, 24.01.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laser bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Wien
Vienna, Austria, 03.07.2024 - 03.07.2024

K. Kosiba, D. Kononenko, J. van den Brink, D. Cherniavskii, J. Hufenbach
Machine learning meets metal additive manufacturing: from process control to materials design
Summer School Materials 4.0 | Technische Universität Dresden
Dresden, Germany, 29.08.2024 - 29.08.2024

B. Paul, A. Bahrami, V. Hahn, A. Quade, F. Hempel, J. Hufenbach, K. Nielsch
Biodegradierbare ZnO-Beschichtung mittels Atomlagenabscheidung für temporäre Fe-basierte Implantatmaterialien
EFDS Workshop „Implantate – Wenn die Antwort in der Schicht steckt!“ | Aesculap Akademie
Tuttlingen, Germany, 27.02.2024 - 27.02.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laserpowder bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Vienna
Vienna, Austria, 03.07.2024 - 03.07.2024

K. Kosiba, S. Scudino, J. Hufenbach, Jozef Bednarcik
Exploring the microstructure of additively manufactured metals via high energy X-ray diffraction 
School of XFEL and synchrotron radiation users 2024 | Pavol Jozef Safarik University
Kosice, Slovakia, 14.10.2024 - 17.10.2024

B. Paul, A. Bahrami, V. Hahn, A. Quade, F. Hempel, J. Hufenbach, K. Nielsch
Biodegradierbare ZnO-Beschichtung mittels Atomlagenabscheidung für temporäre Fe-basierte Implantatmaterialien
Europäische Forschungsgesellschaft Dünne Schichten e.V. Workshop „Implantate – Wenn die Antwort in der Schicht steckt!“ | Aesculap Akademie
Tuttlingen, Germany, 27.02.2024 - 27.02.2024

M. Otto
Optimisation of Fe-Mn-C steels for biodegradable vascular implant applications
IMDEA Materials-Seminar | IMDEA Materials
Madrid, Spain, 23.05.2024 - 23.05.2024

K. Kosiba, D. Wolf, M. Bönisch, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Designing a wear-resistant tool steel for laser powder bed fusion
Alloys for Additive Manufacturing Symposium (AAMS) 2024 | Ecole Polytechnique Palaiseau (Paris), France
Paris, France, 03.09.2024 - 06.09.2024

M. Otto
Fe-Mn-C steels for biodegradable vascular implant applications
guest seminar | IMDEA Materials Institute
Madrid, Spain, 23.05.2024 - 23.05.2024

K. Kosiba
Machine learning for laser powder bed fusion: toward material synthesis by design
Machine learning for laser powder bed fusion: toward material synthesis by design | International conference on advanced materials and manufacturing processes (ICAMMP) 2023, Jawaharlal Nehru Technological University Gurajada Vizianagaram (JNTUGV), College of Engineering, Vizianagram 535003 Andhra Pradesh, India
03.03.2023

A. Gebert, S. Pilz, M. Roshchina, N. Fernandez Navas, A. Akman, J. Vishnu, K. Kosiba, U. Kühn, C.J. Querebillo, M. Calin
Challenges and potentials of novel glassy and beta-type Ti alloys for biomedical use
Thermec'2023 | Technische Universität Wien
Vienna, Austria, 03.07.2023

K. Kosiba, D. Chernyavsky, D. Kononenko, J. van den Brink, J. Hufenbach
Machine learning meets additive manufacturing: toward material synthesis by design
Werkstoffwissenschaftliches Kolloquium Sommersemester 2023 | Technische Universität Bergakademie Freiberg
Freiberg, Germany, 19.06.2023 - 19.06.2023

U. Kühn, J. Sander, J. Freudenberger, J. Hufenbach
Werkstoffentwicklung für additive Verfahren
Symposium Werkstoffprüfung | Firma Hegewald & Peschke Meß- und Prüftechnik GmbH
Nossen, Germany, 21.09.2023

M. Otto
Microstructure-property relationships of Fe-Mn-C alloys for bioresorbable vascular implants
FEMS EUROMAT 2023 | Goethe Campus Westend
Frankfurt/Main, Germany, 04.09.2023 - 04.09.2023

M. Otto, A. Gebert, B. Paul, J. Freudenberger, J. Hufenbach
Microstructural, mechanical and biodegradation properties of as-cast and hot forged Fe-Mn-C alloys
International Symposium on Biodegradable Metals/Biometals 2022
24.08.2022 - 29.08.2022

B. Paul, J. Hufenbach
Inhärente antibakterielle Wirkung von FeMnC-basierten temporären Implantatwerkstoffen
16. Innovation Forum Medizintechnik | Stadthalle Tuttlingen
Tuttlingen, Germany, 17.10.2024 - 17.10.2024

Invited Talks

J. Hufenbach, M. Otto, B. Paul
Novel Biodegradable FeMn-Based Alloy for Additively ManufacturedImplants
3rd International Conference on Materials Science & Engineering
18.04.2022 - 22.04.2022

K. Kosiba, D. Chernyavsky, J. Han, H.J. Kim, J. van den Brink, D. Kononenko
A machine learning model for data-driven material synthesis via metal additive manufacturing
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

K. Kosiba
Laser powder bed fusion of advanced materials and their characterization
Seminar at Korea Institute of Materials Science | Korea Institute of Materials Science
26.10.2022

J. Hufenbach, M. Otto, K. Kosiba, B. Paul
Effect of laser powder bedfusion on a novel biodegradable Fe-based alloy for implant applications
IMR-Workshop, Institute of Metal Research (IMR) | Chinese Academy of Sciences, China
04.08.2022 - 07.08.2022

J. Hufenbach, T. Gustmann, K. Kosiba, U. Kühn
Novel tool steels for additve manufacturing
Online Kolloquium Advanced Manufacturing für den „InnovationsCampus Mobilität der Zukunft“ | Karlsruher Institut für Technologie und Universität Stuttgart
19.01.2022

J. Hufenbach
Legierungsdesign und Prozesstechnologien am IFW Dresden
Herbsttagung der Eisendraht- und Stahldraht-Vereinigung e.V. | Eisendraht- und Stahldraht-Vereinigung e.V.
Hamm, Germany, 20.10.2022 - 20.10.2022

J. Hufenbach, U. Kühn, K. Kosiba
Designing tool steels for laser powder bed fusion
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

K. Kosiba, D. Chernyavsky, J. van den Brink, D. Kononenko
Applying machine learning for data driven material synthesis via metal additive manufacturing
4th International Academic Forum on Advanced Materials and Intelligent Manufacturing (AMIM) | Shanghai University of Engineering Science (SUES), China
Shanghai, China, 16.10.2022

T. Gustmann
Prozess-Gefüge-Eigenschaftskorrelationen bei der additiven Fertigung von NiTi- und Kupfer-Basis-Formgedächtnislegierungen
Werkstoffwissenschaftliches Kolloquium im WS 2021/22 | TU Bergakademie Freiberg (Institut für Werkstofftechnik)
31.01.2022 - 31.01.2022

J. Hufenbach
Novel biodegradable FeMn-based alloy for individualized implantapplications
4th International Conference of Advanced and Personalized Medicine | Shanghai Ninth People's Hospital
25.12.2021

B. Paul
Influence of different pre-conditioning on additively manufactured, biodegradable Fe-based stents
13th Biometals
22.08.2021 - 27.08.2021

T. Gustmann
Laser Powder Bed Fusion of Cu-based Shape Memory Alloys - Unlocking the Performance of a Unique Class of Materials
Virtual Workshop Program INVIRTA 2021 - Powder Materials for Additive Manufacturing - 8. Workshop (Manufacturing and processing of copper powders for AM processes) | INVIRTA - Virtual Workshop Program
07.09.2021 - 07.09.2021

J. Hufenbach, K. Kosiba, T. Gustmann, U. Kühn
Novel steels for additive manufacturing of tools
24. INTERNATIONALES DRESDNER LEICHTBAUSYMPOSIUM
17.06.2021 - 18.06.2021

T. Gustmann, H. Korn, M. Werner, F. Gutmann, K. Kappe, F. Wenz, P. Koch, W.-G. Drossel
Fabrication and functional properties of additively manufactured NiTi lattice structures using adaptive scanning strategies
Fraunhofer Direct Digital Manufacturing Conference 2020
23.06.2020

Monographs

J. Freudenberger, M. Heilmaier
Materialkunde der Nichteisenmetalle und -legierungen
(2020), URL

Monograph Contributions

2024 - J. Freudenberger, L. Tikana, W.F. Hosford, Editor(s): T. Chakraborty
Alloys: Copper. In: Encyclopedia of Condensed Matter Physics (2nd Edition)
| Volume: 5 | P. 601-634 | URL

Monograph Contributions

2021 - J. Freudenberger, M. Heilmaier, U. Wendt, Editor(s): K.-H. Grote, H. Hefazi
Atomic Structure and Microstructure Characterization, In: Springer Handbook of Mechanical Engineering
| P. 131-164 | URL