Journal Papers

H. Chen, X. Yang, D. Gu, Y. Liu, S. Yang, X. Chen, K. Kosiba, Y. Chen, J. Du, K.G. Prashanth, Y. Wang, T. Lu
Unusual deformation substructure and strain hardening in an additively manufactured CoCrFeMnNi high entropy alloy under high-velocity impact loading
Journal of Materials Science & Technology 241, 35-51 (2026) URL

B. Paul, A. Bahrami, V. Hahn, A. Quade, A. Datye, K. Kosiba, S. Pilz, P. Goldberg, U.D. Schwarz, F. Hempel, J. Hufenbach, K. Nielsch
Atomic Layer Deposition of ZnO Coating on Biodegradable Fe‐Based Alloys
Advanced Materials Interfaces 12, 2400895/1-12 (2025) URL

Y. Liu, K. Zhang, T. Lu, Y. Hu, H. Chen, D. Wang, M. Zhang, K. Kosiba, Y. Wang
Overcoming the strength-ductility trade-off in additive manufacturing of titanium alloy by in situ fabrication of heterogeneous lamellar microstructure
International Journal of Extreme Manufacturing (2025) URL

D. Chernyavsky, D.Y. Kononenko, J. Hufenbach, J. van den Brink, K. Kosiba
Bayesian optimization for laser powder bed fusion of defect-free AA2024
Additive Manufacturing 114, 105022/1-16 (2025) URL

C. Pan, T. Wang, J. Fan, Z. Jin, H. Luo, J. Czarske, R. Kuschmierz, X. Li, K. Kosiba
Machine learning-assisted fabrication for CoCrNi-TiCx composite coatings: Process parameters, microstructure and properties
Ceramics International 51, 16354-16369 (2025) URL

K. Sun, X.D. Yuan, N.Z. Zhang, Y.F. Jia, J.C. Tseng, K. Kosiba, Y.D. Jia, C. Shuai, S. Pauly, G. Wang
Non-monotonic fluctuation of structural heterogeneity in metallic glass due to cyclic rapid heat treatment
Applied Physics Letters 126, 021901/1-9 (2025) URL

B. Wang, C. Pan, Z. Jin, H. Zhu, C. Lu, J. Hufenbach, X. Li, K. Kosiba
Enhancing the strength-ductility synergy in CoCrNi medium-entropy alloys via grain boundary segregation engineering
Virtual and Physical Prototyping 20, e2515238/1-17 (2025) URL

Y. Shi, H. Chen, Y. Liu, Y. Wang, K. Kosiba
Exploring Microstructure Evolution in CoCrFeNi High-Entropy Alloy During Laser Powder Bed Fusion: A Molecular Dynamics Simulation
Journal of Alloys and Compounds 1022, 179955/1-49 (2025) URL

K. Chen, H. Wan, H. Chen, X. Fang, T. Lu, Y. Wang, Y. Liu, K. Kosiba
Longitudinal wave propagation behavior and dimension effect of origami-inspired metamaterials prepared by laser powder bed fusion
Materials & Design 252, 113781/1-14 (2025) URL

A.V. Boehm, S. Pilz, R. Wonneberger, S. Martin, J. Sander, L. Giebeler, K. Kosiba, A. Undisz, A. Leineweber, J.K. Hufenbach
Lean tool steel processed via laser powder bed fusion: in situ observation of transformation induced plasticity
Materials Science and Engineering: A 944, 148906/1-11 (2025) URL

K. Kosiba, W. King, J. Han, B. Paul, D.Y. Kononenko, M. Otto, D. Chernyavsky, J. van den Brink, S. Scudino, J. Hufenbach
Fabrication of filigree parts via laser powder bed fusion: From melt spots to stents
Optics & Laser Technology 180, 111485/1-11 (2025) URL

Y. Liu, T. Wang, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Impact behaviors of additively manufactured metals and structures: A review
International Journal of Impact Engineering 191, 104992/1-36 (2024) URL

X. Zheng, H. Chen, T. Lu, N. Yao, Y. Wang, Y. Liu, K. Kosiba
Laser additive manufacturing of CoCrNi medium entropy alloy composites reinforced by in-situ nanoprecipitations: Microstructure formation and mechanical properties
Materials Characterization 207, 11350071/1-13 (2024) URL

S. Yang, Y. Liu, H. Chen, Y. Wang, K. Kosiba
Laser powder bed fusion of Fe₆₀(CoCrNiMn)₄₀ medium-entropy alloy with excellent strength-ductility balance
Materials & Design 238, 112720/1-13 (2024) URL

D.Y. Kononenko, D. Chernyavsky, W.E. King, J.K. Hufenbach, J. van den Brink, K. Kosiba
Designing materials by laser powder bed fusion with machine learning-driven bi-objective optimization
Journal of Materials Research and Technology 30, 6802-6811 (2024) URL

H. Wan, H. Chen, Y. Wang, X. Fang, Y. Liu, K. Kosiba
Laser additive manufacturing of Miura-origami tube inspired quasi-zero stiffness metamaterial with prominent longitudinal wave propagation
Virtual and Physical Prototyping 19, 2299691/1-19 (2024) URL

B. Rivkin, F. Akbar, M. Otto, L. Beyer, B. Paul, K. Kosiba, T. Gustmann, J. Hufenbach, M. Medina Sanchez
Remotely Controlled Electrochemical Degradation of Metallic Implants
Small 20, 2307742/1-14 (2024) URL

K. Sun, H. Weber, G. Wang, Y.H. Wu, A.F. Andreoli, J.C. Tseng, J. Shen, B. Zhang, H.R. Jiang, L.M. Xu, X.D. Ma, N.Z. Zhang, Y.F. Jia, K. Kosiba, U. Kühn, S. Pauly
Structural heterogeneity in levitated glassy alloys with different undercoolings
Journal of Alloys and Compounds 947, 169532/1-10 (2023) URL

D. Chernyavsky, D. Kononenko, J.H. Han, H.J. Kim, J. van den Brink, K. Kosiba
Machine learning for additive manufacturing: Predicting materials characteristics and their uncertainty
Materials & Design 227, 111699/1-10 (2023) URL

C. Pan, D. Zhu, H. Luo, K. Kosiba, S. Qu, C. Yang, X. Li
Fabrication of high-performance CoCrNi medium entropy alloy by laser powder bed fusion: The effect of grain boundary segregation
Composites Part B: Engineering 253, 110540/1-15 (2023) URL

K. Kosiba, D. Wolf, M. Bönisch, K. Neufeld, R. Hühne, T. Gustmann, J. Bednarčík, H. Chen, X. Han, V. Hoffmann, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating
Journal of Materials Science & Technology 156, 1-19 (2023) URL

H.S. Maurya, R.J. Vikram, K. Kosiba, K. Juhani, F. Sergejev, S. Suwas, K.G. Prashanth
Additive manufacturing of CMCs with bimodal microstructure
Journal of Alloys and Compounds 938, 168416/1-5 (2023) URL

K. Kosiba, T. Gustmann, J.T. Kim, J. Seok, J. Jung, L. Beyer, S. Scudino, L. Giebeler, J. Han, J. Hufenbach
Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions
Journal of Alloys and Compounds 967, 171773/1-10 (2023) URL

H. Chen, K. Kosiba, T. Lu, N. Yao, Y. Liu, Y. Wang, K. Prashanth, C. Suryanarayana
Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
Journal of Materials Science & Technology 136, 245-259 (2023) URL

W.C. Batalha, R.L. Batalha, K. Kosiba, C.S. Kiminami, P. Gargarella
Effect of scanning strategy on microstructure and mechanical properties of a biocompatible Ti–35Nb–7Zr–5Ta alloy processed by laser-powder bed fusion
Journal of Materials Research 38, 154-164 (2023) URL

K. Kosiba, D. Kononenko, D. Chernyavsky, L. Deng, J. Bednarcik, J. Han, J. van den Brink, H. Kim, S. Scudino
Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion
Journal of Alloys and Compounds 940, 168946/1-15 (2023) URL

H. Chen, K. Kosiba, C. Suryanarayana, T. Lu, Y. Liu, Y. Wang, K.G. Prashanth
Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites
International Materials Reviews 68, 1192-1244 (2023) URL

U. Kühn, J. Sander, K.N. Gabrysiak, L. Giebeler, K. Kosiba, S. Pilz, K. Neufeld, A.V. Boehm, J. Hufenbach
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting
Materials 15, 7266/1-10 (2022) URL

Z. Wang, X. Lin, L. Wang, H. Yang, Y. Zhou, J.K. Hufenbach, K. Kosiba, T. Zhang, W. Huang
Novel high-strength Al-Cu-Cd alloy fabricated by arc-directed energy deposition: Precipitation behavior of the Cd phase and grain evolution
Additive Manufacturing 60, Part B, 103278/1-15 (2022) URL

H. Chen, T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Materials Science and Engineering A 833, 142512/1-16 (2022) URL

T. Lu, N. Yao, H. Chen, B. Sun, X. Chen, S. Scudino, K. Kosiba, X. Zhang
Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
Additive Manufacturing 56, 102918/1-16 (2022) URL

K. Kosiba
Thermoplastic embossing device to probe rheological changes of supercooled metallic liquids during rapid heating
Review of Scientific Instruments 93, 033901/1-9 (2022) URL

T. He, T. Lu, D. Şopu, X. Han, H. Lu, K. Nielsch, J. Eckert, N. Ciftci, V. Uhlenwinkel, K. Kosiba, S. Scudino
Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy
Journal of Materials Science & Technology 114, 42-54 (2022) URL

H. Maurya, K. Kosiba, K. Juhani, F. Sergejev, K. Prashanth
Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Additive Manufacturing 58, 103013/1-13 (2022) URL

H. Chen, Y. Liu, Y. Wang, Z. Li, D. Wang, K. Kosiba
Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy
Materials & Design 224, 111324/1-12 (2022) URL

R. Batalha, V. Pinotti, O. Alnoaimy, W. Batalha, T. Gustmann, K. Kosiba, S. Pauly, C. Bolfarini, C. Kiminami, P. Gargarella
Microstructure and properties of TiB2-reinforced Ti–₃₅Nb–₇Zr–₅Ta processed by laser-powder bed fusion
Journal of Materials Research 37, 259–271 (2022) URL

C. Pan, X. Li, H. Luo, K. Kosiba, S. Qu, C. Yang, D. Zhu, C. Zhang
Tuning the strength and ductility balance of a Co₃₂Cr₃₆Ni₃₂ medium entropy alloy fabricated by selective laser melting: Effect of segregations along grain boundaries
Materials Science and Engineering A 840, 14923/1-5 (2022) URL

Y. Liu, J. Meng, L. Zhu, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions
Additive Manufacturing 54, 102772/1-16 (2022) URL

L. Deng, L. Zhang, K. Kosiba, R. Limbach, L. Wondraczek, G. Wang, D. Gu, U. Kühn, S. Pauly
CuZr-based bulk metallic glass and glass matrix composites fabricated by selective laser melting
Journal of Materials Science & Technology 81, 139-150 (2021) URL

H. Chen, D. Gu, L. Deng, T. Lu, U. Kühn, K. Kosiba
Laser additive manufactured high-performance Fe-based composites with unique strengthening structure
Journal of Materials Science & Technology 89, 242-252 (2021) URL

H. Zhang, D. D. Gu, C. Ma, M. Guo, J. Yang, H. Zhang, H. Chen, C. Li, K. Svynarenko, K. Kosiba
Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
Materials Science and Engineering A 802, 140431/1-12 (2021) URL

K. Kosiba, K.G. Prashanth, S. Scudino
Phase Formation, Microstructure and Mechanical Properties of Mg₆₇Ag₃₃ as Potential Biomaterial
Metals 11, 461/1-10 (2021) URL

H. Chen, D. Gu, Q. Ge, X. Shi, H. Zhang, R. Wang, H. Zhang, K. Kosiba
Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
International Journal of Minerals, Metallurgy and Materials 28, 462-474 (2021) URL

L. Deng, K. Kosiba, R. Limbach, L. Wondraczek, U. Kühn, S. Pauly
Plastic deformation of a Zr-based bulk metallic glass fabricated by selective laser melting
Journal of Materials Science & Technology 60, 139-146 (2021) URL

H. Chen, D. D. Gu, H. Zhang, L. Xi, T. Lu, L. Deng, U. Kühn, K. Kosiba
Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
Journal of Materials Processing Technology 289, 116959/1-14 (2021) URL

K. Sun, L.M. Xu, H. Weber, G. Wang, J.C. Tseng, J. Shen, S.W. Wu, X.L. Bian, K. Kosiba, U. Kühn, S. Pauly
A refined local structure in a metallic glass tailored via flash-annealing
Materials Characterization 178, 111214/1-10 (2021) URL

J. Orava, K. Kosiba, X. Han, I. Soldatov, O. Gutowski, O. Ivashko, A.-C. Dippel, M. v. Zimmermann, A. Rothkirch, J. Bednarcik, U. Kühn, H. Siegel, S. Ziller, A. Horst, K. Peukert, R. Voigtländer, D. Lindackers, I. Kaban
Fast-current-heating devices to study in situ phase formation in metallic glasses by using high-energy synchrotron radiation
Review of Scientific Instruments 91, 073901/1-8 (2020) URL

K. Kosiba, S. Scudino, J. Bednarčík, J.J. Bian, L. Gang, U. Kühn, S. Pauly
Guiding shear bands in bulk metallic glasses using stress fields: A perspective from the activation of flow units
Physical Review B 102, 134113/1-8 (2020) URL

H. Chen, D. Gu, K. Kosiba, T. Lu, L. Deng, L. Xi, U. Kühn
Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing
Additive Manufacturing 35, 101195/1-10 (2020) URL

K. Kosiba, A. Rothkirch, J. Han, L. Deng, B. Escher, G. Wang, U. Kühn, J. Bednarcik
Phase formation of a biocompatible Ti-based alloy under kinetic constraints studied via in-situ high-energy X-ray diffraction
Progress in Natural Science: Materials International 30, ‏ 432-436 (2020) URL

R. Batalha, S. Pauly, U. Kühn, K. Kosiba, C. Bolfarini, C. Kiminami, P. Gargarella
Oligocrystalline microstructure in an additively manufactured biocompatible Ti-Nb-Zr-Ta alloy
Materials Letters 262, 127149/1-3 (2020) URL

D. Shin, C.H. Lee, U. Kühn, S.C. Lee, S.J. Park, H. Schwab, S. Scudino, K. Kosiba
Optimizing Laser Powder Bed Fusion of Ti-5Al-5V-5Mo-3Cr by Artificial Intelligence
Journal of Alloys and Compounds 158018/1-9 (2020) URL

P. Wang, A. Gebert, L. Yan, H. Li, C. Lao, Z. Chen, K. Kosiba, U. Kühn, S. Scudino
Corrosion of Al-3.5Cu-1.5 Mg–1Si alloy prepared by selective laser melting and heat treatment
Intermetallics 124, 106871/1-6 (2020) URL

J. Bednarčík, K. Kosiba, S. Pauly, A. Rothkirch
In situ XRD Study of Rapid Crystallization of Metallic Glasses Using Novel Experimental Setup for Flash-Annealing
Acta Physica Polonica A 137, 852-854 (2020) URL

K. Kosiba, L. Deng, S. Scudino
Viscous Flow of Supercooled Liquid in a Zr-Based Bulk Metallic Glass Synthesized by Additive Manufacturing
Materials 13, 3803/1-10 (2020) URL

L. Deng, A. Gebert, L. Zhang, H.Y. Chen, D. Gu, U. Kühn, M. Zimmermann, K. Kosiba, S. Pauly
Mechanical performance and corrosion behaviour of Zr-based bulk metallic glass produced by selective laser melting
Materials & Design 189, 108532/1-11 (2020) URL

K. Kosiba, K. Song, U. Kühn, G. Wang, S. Pauly
Glass-forming ability, phase formation and mechanical properties of glass-forming Cu-Hf-Zr alloys
Progress in Natural Science: Materials International 29, 576-581 (2019) URL

K. Kosiba, D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
Modulating heterogeneity and plasticity in bulkmetallic glasses: Role of interfaces on shear banding
International Journal of Plasticity 119, 156-170 (2019) URL

S. Pauly, P. Wang, U. Kuehn, K. Kosiba
Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu
Additive Manufacturing 22, 753-757 (2018) URL

K.K. Song, X.L. Han, S. Pauly, Y.S. Qin, K. Kosiba, C.X. Peng, J.H. Gong, P.X. Chen, L. Wang, B. Sarac, S. Ketov, M. Muehlbacher, F. Spieckermann, I. Kaban, J. Eckert
Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites
Materials & Design 139, 132-140 (2018) URL

R. Limbach, K. Kosiba, S. Pauly, U. Kuehn, L. Wondraczek
Serrated flow of CuZr-based bulk metallic glasses probed by nanoindentation: Role of the activation barrier, size and distribution of shear transformation zones
Journal of Non-Crystalline Solids 459, 130-141 (2017) URL

K. Kosiba, S. Pauly
Inductive flash-annealing of bulk metallic glasses
Scientific Reports 7, 2151/1-11 (2017) URL

K. Kosiba, S. Scudino, R. Kobold, U. Kuehn, A.L. Greer, J. Eckert, S. Pauly
Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
Acta Materialia 127, 416-425 (2017) URL

B. Sarac, L. Zhang, K. Kosiba, S. Pauly, M. Stoica, J. Eckert
Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses
Scientific Reports 6, 27271/1-8 (2016) URL

S. Pauly, K. Kosiba, P. Gargarella, B. Escher, K.K. Song, G. Wang, U. Kuehn, J. Eckert
Microstructural evolution and mechanical behaviour of metastable Cu-Zr-Co alloys
Journal of Material Science and Technologie 30, 584-589 (2014) URL

K. Kosiba, P. Gargarella, S. Pauly, U. Kuehn, J. Eckert
Predicted glass-forming ability of Cu-Zr-Co alloys and their crystallization behavior
Journal of Applied Physics 113, 123505/1-4 (2013) URL

Contributions to collected editions/proceedings

Z. Jin, K. Kosiba, J. Hufenbach
A novel medium-carbon steel for laser powder bed fusion: microstructure, mechanical and wear properties 
Alloy for Additive Manufacturing Symposium (AAMS 2025), (2025), URL

Invited Talks

K. Kosiba, J. Bednarčík, S. Scudino
HEXRD mapping for advanced characterization of metals : 2D strain tensor and phase distribution
DESY Photon Science Users' Meeting | Deutsches Elektronen-Synchrotron (DESY)
Hamburg, Germany, 24.01.2024

K. Kosiba, S. Scudino, J. Hufenbach, Jozef Bednarcik
Exploring the microstructure of additively manufactured metals via high energy X-ray diffraction 
School of XFEL and synchrotron radiation users 2024 | Pavol Jozef Safarik University
Kosice, Slovakia, 14.10.2024 - 17.10.2024

K. Kosiba, D. Kononenko, J. van den Brink, D. Cherniavskii, J. Hufenbach
Machine learning meets metal additive manufacturing: from process control to materials design
Summer School Materials 4.0 | Technische Universität Dresden
Dresden, Germany, 29.08.2024 - 29.08.2024

K. Kosiba, D. Wolf, M. Bönisch, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Designing a wear-resistant tool steel for laser powder bed fusion
Alloys for Additive Manufacturing Symposium (AAMS) 2024 | Ecole Polytechnique Palaiseau (Paris), France
Paris, France, 03.09.2024 - 06.09.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laserpowder bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Vienna
Vienna, Austria, 03.07.2024 - 03.07.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laser bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Wien
Vienna, Austria, 03.07.2024 - 03.07.2024

J. Hufenbach, B. Paul, K. Kosiba
Werkstoffentwicklung für die additive Fertigung
effiPrint Frühjahrsveranstaltung | Professur für Umformtechnik, Technische Universität Chemnitz
Chemnitz, Germany, 14.03.2024 - 14.03.2024

A. Gebert, S. Pilz, M. Roshchina, N. Fernandez Navas, A. Akman, J. Vishnu, K. Kosiba, U. Kühn, C.J. Querebillo, M. Calin
Challenges and potentials of novel glassy and beta-type Ti alloys for biomedical use
Thermec'2023 | Technische Universität Wien
Vienna, Austria, 03.07.2023

K. Kosiba
Machine learning for laser powder bed fusion: toward material synthesis by design
Machine learning for laser powder bed fusion: toward material synthesis by design | International conference on advanced materials and manufacturing processes (ICAMMP) 2023, Jawaharlal Nehru Technological University Gurajada Vizianagaram (JNTUGV), College of Engineering, Vizianagram 535003 Andhra Pradesh, India
03.03.2023

K. Kosiba, D. Chernyavsky, D. Kononenko, J. van den Brink, J. Hufenbach
Machine learning meets additive manufacturing: toward material synthesis by design
Werkstoffwissenschaftliches Kolloquium Sommersemester 2023 | Technische Universität Bergakademie Freiberg
Freiberg, Germany, 19.06.2023 - 19.06.2023

J. Hufenbach, T. Gustmann, K. Kosiba, U. Kühn
Novel tool steels for additve manufacturing
Online Kolloquium Advanced Manufacturing für den „InnovationsCampus Mobilität der Zukunft“ | Karlsruher Institut für Technologie und Universität Stuttgart
19.01.2022

J. Hufenbach, M. Otto, K. Kosiba, B. Paul
Effect of laser powder bedfusion on a novel biodegradable Fe-based alloy for implant applications
IMR-Workshop, Institute of Metal Research (IMR) | Chinese Academy of Sciences, China
04.08.2022 - 07.08.2022

J. Hufenbach, U. Kühn, K. Kosiba
Designing tool steels for laser powder bed fusion
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

K. Kosiba, D. Chernyavsky, J. van den Brink, D. Kononenko
Applying machine learning for data driven material synthesis via metal additive manufacturing
4th International Academic Forum on Advanced Materials and Intelligent Manufacturing (AMIM) | Shanghai University of Engineering Science (SUES), China
Shanghai, China, 16.10.2022

K. Kosiba
Laser powder bed fusion of advanced materials and their characterization
Seminar at Korea Institute of Materials Science | Korea Institute of Materials Science
26.10.2022

K. Kosiba, D. Chernyavsky, J. Han, H.J. Kim, J. van den Brink, D. Kononenko
A machine learning model for data-driven material synthesis via metal additive manufacturing
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

J. Hufenbach, K. Kosiba, T. Gustmann, U. Kühn
Novel steels for additive manufacturing of tools
24. INTERNATIONALES DRESDNER LEICHTBAUSYMPOSIUM
17.06.2021 - 18.06.2021

K. Kosiba, S. Scudino, S. Pauly, L. Deng, U. Kühn
Bulk metallic glasses at the Leibniz IFW Dresden: synthesis, structure and properties
Workshop KITECH – IFW – KIMS | Korean Institute of Industrial Technology, Seoul, Incheon
Seoul, South Korea, 02.12.2019 - 03.12.2019

Da Seul Shin, K. Kosiba
Density prediction in selective laser melting using neural networks
Workshop KITECH – IFW – KIMS | Korean Institute of Industrial Technology, Seoul, Incheon
Seoul, South Korea, 03.12.2019 - 04.12.2019

K. Kosiba
Materials science at the ICM
Workshop POSTECH - IFW | Pohang University of Science and Technology (POSTECH)
Pohang, South Korea, 05.12.2019 - 05.12.2019

K. Kosiba, S. Scudino, U. Kühn
Non-equilibrium phases and microstructures
BAM-IFW Workshop | Bundesanstalt für Materialforschung und -prüfung
Berlin, Germany, 25.11.2019 - 26.11.2019

K. Kosiba, D. Sopu, L. Zhang, J. Bednarcik, S. Pauly
Modulating Heterogeneity and Plasticity in Bulk Metallic Glasses
International Conference of Plasticity, Damage and Fracture
Panama-Stadt, Panama, 05.01.2019

K. Kosiba, D. Sopu, L. Zhang, J. Bednarcik, S. Pauly
Modulating Heterogeneity and Plasticity in Bulk Metallic Glasses: Role of Interfaces on Shear Banding
Korea Institute of Technology (KITECH), Seoul/ Suedkorea, 25.5.18
Seoul, South Korea, 25.05.2018 - 25.05.2018

S. Pauly, K. Kosiba, S. Scudino, U. Kuehn, A.L. Greer
Designing microstructures of metallic glass matrix composites by flash-annealing
Workshop at Shandong University, Weihai/ China