Journal Papers

H. Chen, X. Yang, D. Gu, Y. Liu, S. Yang, X. Chen, K. Kosiba, Y. Chen, J. Du, K.G. Prashanth, Y. Wang, T. Lu
Unusual deformation substructure and strain hardening in an additively manufactured CoCrFeMnNi high entropy alloy under high-velocity impact loading
Journal of Materials Science & Technology 241, 35-51 (2026) URL

P. Grimm, L. Giebeler, J. Hufenbach
Harnessing centrifugal casting for designing aluminum alloys adapted to laser powder bed fusion
Journal of Materials Research and Technology 1-36 (2025) URL

M. Straßheim, C. Salazar Mejía, E. Bykov, T. Niehoff, L. Beyer, J. Freudenberger, R. Hübner, F. Ganss, T. Naumann, J. Wosnitza, T. Gottschall
Magnetocaloric effect in La_1−zCe_z(Fe_0.88−yMn_ySi_0.12)₁₃ with tunable, low transition temperature in high magnetic fields
Journal of Applied Physics 137, 045106/1-9 (2025) URL

B. Denkena, J. Hufenbach, B. Bergmann, U. Kühn, V. Kaban, J. Schenzel, S. Worpenberg, C. Kunz
Impact of microstructure and heat treatment on chip formation of Ti-5553 processed by laser powder bed fusion
Production Engineering 1-13 (2025) URL

M. Otto, T. Hultsch, V. Shtefan, V. Hoffmann, S.V. Lamaka, T. Gemming, A. Gebert, J. Fröhlich, M. Zheludkevich, J. Hufenbach
Mechanisms of laminar flow controlled in vitro corrosion of a biodegradable Fe-Mn-C steel
Corrosion Science 249, 112860/1-17 (2025) URL

J. Brunner, A. Wrzesinska-Lashkova, L. Scalon, R. Pinheiro Muniz, A. Prudnikau, D. Pohl, M. Löffler, F. Paulus, Y. Vaynzof
Post‐Degradation Recovery of CsPbI₃ Quantum Dot Solar Cells
Small 21, 2409709/1-9 (2025) URL

B. Paul, A. Bahrami, V. Hahn, A. Quade, A. Datye, K. Kosiba, S. Pilz, P. Goldberg, U.D. Schwarz, F. Hempel, J. Hufenbach, K. Nielsch
Atomic Layer Deposition of ZnO Coating on Biodegradable Fe‐Based Alloys
Advanced Materials Interfaces 12, 2400895/1-12 (2025) URL

H. Roshan, A. Prudnikau, J. Dai, M. Cirignano, F. De Boni, M. Prato, F. Paulus, V. Lesnyak, F. Di Stasio
Short-Wave Infrared Optoelectronics with Colloidal CdHgSe/ZnCdS Core/Shell Nanoplatelets
ACS Photonics 12, 40-47 (2025) URL

A.V. Boehm, S. Pilz, R. Wonneberger, S. Martin, J. Sander, L. Giebeler, K. Kosiba, A. Undisz, A. Leineweber, J.K. Hufenbach
Lean tool steel processed via laser powder bed fusion: in situ observation of transformation induced plasticity
Materials Science and Engineering: A 944, 148906/1-11 (2025) URL

M. Roy-Chowdhury, T. Sarkar, B. Weise, E. Sang Choi, Z. Wen, S. Thota
Non-equilibrium spin dynamics of the frustrated trication spinel ZnMnCoO₄ in the hierarchical free-energy framework
Journal of Physics: Condensed Matter 37, 135806/1-16 (2025) URL

F. Koc, N.P. Gallop, J. Shi, B. Rivkin, F. Paulus, Y. Vaynzof
Controlling Halide Segregation in Hybrid Perovskites Through Varied Halide Stoichiometry and Illumination Conditions
Advanced Electronic Materials 2400895/1-7 (2025) URL

W.S. Yang, J.H. Kim, M.J. Kim, S.Y. Yang, Lee A Young, H. Esmaeilpoor, J.H. Kim, K.S. Lee, D.S. Shin
Evolution of magnetocaloric anisotropy in gadolinium wires induced by cold drawing
Journal of Alloys and Compounds 1014, 178657/1-6 (2025) URL

Y. Liu, K. Zhang, T. Lu, Y. Hu, H. Chen, D. Wang, M. Zhang, K. Kosiba, Y. Wang
Overcoming the strength-ductility trade-off in additive manufacturing of titanium alloy by in situ fabrication of heterogeneous lamellar microstructure
International Journal of Extreme Manufacturing (2025) URL

A.V. Boehm, M.A. Bader, F. Kochta, C. Kunz, U. Kühn, K. Neufeld, L. Giebeler, J.K. Hufenbach
Low-alloyed steel with superior dry abrasive wear resistance and mechanical properties processed via steel mold casting
Wear 566-567, 205756/1-10 (2025) URL

Y. Shi, H. Chen, Y. Liu, Y. Wang, K. Kosiba
Exploring Microstructure Evolution in CoCrFeNi High-Entropy Alloy During Laser Powder Bed Fusion: A Molecular Dynamics Simulation
Journal of Alloys and Compounds 1022, 179955/1-49 (2025) URL

K. Sun, X.D. Yuan, N.Z. Zhang, Y.F. Jia, J.C. Tseng, K. Kosiba, Y.D. Jia, C. Shuai, S. Pauly, G. Wang
Non-monotonic fluctuation of structural heterogeneity in metallic glass due to cyclic rapid heat treatment
Applied Physics Letters 126, 021901/1-9 (2025) URL

C. Pan, T. Wang, J. Fan, Z. Jin, H. Luo, J. Czarske, R. Kuschmierz, X. Li, K. Kosiba
Machine learning-assisted fabrication for CoCrNi-TiCx composite coatings: Process parameters, microstructure and properties
Ceramics International 51, 16354-16369 (2025) URL

K. Kosiba, W. King, J. Han, B. Paul, D.Y. Kononenko, M. Otto, D. Chernyavsky, J. van den Brink, S. Scudino, J. Hufenbach
Fabrication of filigree parts via laser powder bed fusion: From melt spots to stents
Optics & Laser Technology 180, 111485/1-11 (2025) URL

K. Gabrysiak, A.V. Boehm, T. Gustmann, C. Leyens, U. Kühn
Elevated-temperature strength and wear behavior of Al80Mn11Ce9 processed by laser powder bed fusion
Journal of Materials Research and Technology 37, 2327-2337 (2025) URL

K. Chen, H. Wan, H. Chen, X. Fang, T. Lu, Y. Wang, Y. Liu, K. Kosiba
Longitudinal wave propagation behavior and dimension effect of origami-inspired metamaterials prepared by laser powder bed fusion
Materials & Design 252, 113781/1-14 (2025) URL

D. Chernyavsky, D.Y. Kononenko, J. Hufenbach, J. van den Brink, K. Kosiba
Bayesian optimization for laser powder bed fusion of defect-free AA2024
Additive Manufacturing 114, 105022/1-16 (2025) URL

E. Len, I. Galstian, T. Gustmann, O. Gerasymov, D. Savvakin, V. Bondarchuk, D. Oryshych
Effect of high energy laser processing on defect and structural phase state of titanium products made by additive technologies
Applied Physics A 131, 187/1-17 (2025) URL

B. Wang, C. Pan, Z. Jin, H. Zhu, C. Lu, J. Hufenbach, X. Li, K. Kosiba
Enhancing the strength-ductility synergy in CoCrNi medium-entropy alloys via grain boundary segregation engineering
Virtual and Physical Prototyping 20, e2515238/1-17 (2025) URL

S. Drescher, A. Kuzmin, E. Welter, J. Freudenberger, A. Smekhova
Component-dependent lattice distortions and atomic scale insights in multi-component Au-Cu-Ni-Pd-Pt based alloys
Nano Research 18, 94907122/1-14 (2025) URL

J. Ćwik, Y. Koshkid’ko, P. Putyra, B. Weise, M. Małecka, D. Gajda, M. Babij, A. Czernuszewicz
Layered composite magnetic refrigerants for hydrogen liquefaction
International Journal of Hydrogen Energy 87, 485-494 (2024) URL

J. Cassinerio, M.F. Giordana, E. Zelaya, V. Remich, P. Krooß, J. Freudenberger, T. Niendorf, C.E. Sobrero
On the Impact of γ´ Precipitates on the Transformation Temperatures in Fe–Ni–Co–Al–Ti–B Shape Memory Alloy Wires
Shape Memory and Superelasticity 10, 37-44 (2024) URL

R. Ji, Z. Zhang, M. Deconinck, Y.J. Hofstetter, J. Shi, F. Paulus, P. Raval, G.N.M. Reddy, Y. Vaynzof
Spontaneous Formation of 1D/3D Perovskite Heterojunctions for Efficient Inverted Perovskite Solar Cells
Advanced Energy Materials 14, 2304126/1-12 (2024) URL

D. Mikhailova, L. Haase, H.B.A. Nguyen, A. Thomas, M.V. Gorbunov, M. Hantusch, M. Avdeev
Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries
Advanced Functional Materials 34, 2406384/1-16 (2024) URL

B. Paul, A. Kiel, M. Otto, T. Gemming, V. Hoffmann, L. Giebeler, B. Kaltschmidt, A. Hütten, A. Gebert, B. Kaltschmidt, C. Kaltschmidt, J. Hufenbach
Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application
ACS Applied Bio Materials 7, 839-852 (2024) URL

J. Spielmann, D. Braig, A. Streck, T. Gustmann, C. Kuhn, F. Reinauer, A. Kurnosov, O. Leubner, V. Potapkin, C. Hasse, O. Deutschmann, B.J.M. Etzold, A. Scholtissek, U.I. Kramm
Exploring the oxidation behavior of undiluted and diluted iron particles for energy storage: Mössbauer spectroscopic analysis and kinetic modeling
Physical Chemistry Chemical Physics 26, 13049-13060 (2024) URL

L. Merten, T. Eberle, E. Kneschaurek, N. Scheffczyk, P. Zimmermann, I. Zaluzhnyy, A. Khadiev, F. Bertram, F. Paulus, A. Hinderhofer, F. Schreiber
Halide Segregated Crystallization of Mixed-Halide Perovskites Revealed by In Situ GIWAXS
ACS Applied Materials & Interfaces 16, 8913–8921 (2024) URL

T. Lu, T. He, A.F. Andreoli, N. Yao, B. Wan, S. Scudino
The origin of good mechanical and soft magnetic properties in a CoFeNi-based high-entropy alloy with hierarchical structure
Materials Characterization 215, 114237/1-13 (2024) URL

A. Bordoloi, S.K. Jena, P. Tiwari, A. Datta, B. Weise, R. Medwal, R.S. Rawat, S. Thota
Charge-ordering breakdown dynamics and ferromagnetic resonance studies of B-site Cu diluted Pr_1‒xSr_xMnO₃
Journal of Physics: Condensed Matter 36, 1-17 (2024) URL

S. Yang, Y. Liu, H. Chen, Y. Wang, K. Kosiba
Laser powder bed fusion of Fe₆₀(CoCrNiMn)₄₀ medium-entropy alloy with excellent strength-ductility balance
Materials & Design 238, 112720/1-13 (2024) URL

S. Drescher, S. Seils, T. Boll, A. Kauffmann, M. Heilmaier, J. Freudenberger
Solid solution strengthening in single-phase Au-Cu-Ni-Pd-Pt-based high-entropy alloys
Journal of Alloys and Compounds 1002, 175273/1-13 (2024) URL

A. Walnsch, A. Bauer, J. Freudenberger, K. Freiberg, C. Wüstefeld, M. Vollmer, S. Lippmann, T. Niendorf, A. Leineweber, M.J. Kriegel
Thermodynamically Guided Improvement of Fe–Mn–Al–Ni Shape‐Memory Alloys
Advanced Materials 36, 2306794/1-13 (2024) URL

S. Pilz, M. Bönisch, A. Datye, S. Zhang, F. Günther, S. Drescher, U. Kühn, U.D. Schwarz, M. Zimmermann, A. Gebert
Tailoring microstructure and mechanical properties of an LPBF-processed beta Ti-Nb alloy through post-heat treatments
Materials & Design 239, 112799/1-14 (2024) URL

R. Dantas Campos, S. Singh, H. Heffner, M. Löffler, F. Paulus, Y. Vaynzof
Self-assembled molecules for hole extraction in efficient inverted PbS quantum dot solar cells
Journal of Materials Chemistry A 12, 32689-32689 (2024) URL

H. Wan, H. Chen, Y. Wang, X. Fang, Y. Liu, K. Kosiba
Laser additive manufacturing of Miura-origami tube inspired quasi-zero stiffness metamaterial with prominent longitudinal wave propagation
Virtual and Physical Prototyping 19, 2299691/1-19 (2024) URL

V. Kaban, C. Leyens, J. Hufenbach
Non-equilibrium solidification of undercooled Inconel 718
Journal of Alloys and Compounds 1002, 175205/1-14 (2024) URL

B. Rivkin, F. Akbar, M. Otto, L. Beyer, B. Paul, K. Kosiba, T. Gustmann, J. Hufenbach, M. Medina Sanchez
Remotely Controlled Electrochemical Degradation of Metallic Implants
Small 20, 2307742/1-14 (2024) URL

X. Zheng, H. Chen, T. Lu, N. Yao, Y. Wang, Y. Liu, K. Kosiba
Laser additive manufacturing of CoCrNi medium entropy alloy composites reinforced by in-situ nanoprecipitations: Microstructure formation and mechanical properties
Materials Characterization 207, 11350071/1-13 (2024) URL

A. Senina, A. Prudnikau, A. Wrzesinska-Lashkova, Y. Vaynzof, F. Paulus
Cation exchange synthesis of AgBiS₂ quantum dots for highly efficient solar cells
Nanoscale 16, 9325-9334 (2024) URL

B. Denkena, J. Hufenbach, B. Bergmann, U. Kühn, A. Heckemeyer, S. Worpenberg, C. Kunz
Influence of the process parameters on the microstructure and the machinability of additively manufactured Ti-5553 titanium alloy
CIRP Journal of Manufacturing Science and Technology 55, 42-53 (2024) URL

Y. Liu, T. Wang, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Impact behaviors of additively manufactured metals and structures: A review
International Journal of Impact Engineering 191, 104992/1-36 (2024) URL

D.Y. Kononenko, D. Chernyavsky, W.E. King, J.K. Hufenbach, J. van den Brink, K. Kosiba
Designing materials by laser powder bed fusion with machine learning-driven bi-objective optimization
Journal of Materials Research and Technology 30, 6802-6811 (2024) URL

V. Shtefan, A. Gebert, M. Hantusch, K. Neufeld, J. Zeisig, L. Giebeler, V. Hoffmann, A. Undisz, U. Kühn, J.K. Hufenbach
How the multi-phase microstructure of a novel tool steel determines its corrosion behaviour in sulphuric acids
Corrosion Science 233, 112091/1-16 (2024) URL

M. Otto, J. Freudenberger, L. Giebeler, A. Weidner, J. Hufenbach
Developing austenitic high-manganese high-carbon steels for biodegradable stent applications: Microstructural and mechanical studies
Materials Science and Engineering A 892, 145998/1-12 (2024) URL

P. Nitzsche, M. Hauser, N. Lehnert, A. Weidner, S. Henkel, M. Wendler, J. Freudenberger, O. Volkova, V. Kräusel, H. Biermann
Quasi-static tensile and fatigue behaviour of a metastable austenitic stainless Cr-Ni-Cu-N steel
Theoretical and Applied Fracture Mechanics 133, 104571/1-10 (2024) URL

T. Prikhna, M. Monastyrov, I. Soldatov, B. Büchner, L. Giebeler, A. Sathyadharma Prasad, O. Ostash, V. Moshchil, V. Podhurska, P. Potapov, V.V. Romaka, K. Neufeld, R. Kluge, T. Serbenyuk, M. Karpets, M. Omelyanenko, A. Wolter-Giraud, S. Ponomaryov
Corrosion-resistant polymer-based nanocomposite materials with a high level of microwave absorption and soft magnetic materials based on iron oxide nanopowder obtained by electroerosion dispersion
Ceramics International 49, 24322-24331 (2023) URL

S. Drescher, S. Seils, D. Pohl, B. Rellinghaus, A. Kauffmann, M. Heilmaier, J. Freudenberger
Softening by spinodal decomposition in Au-Cu-Ni-Pd-Pt high-entropy alloys
Materials Science and Engineering A 887, 145772/1-11 (2023) URL

F. Jürries, L. Beyer, K. Nielsch, T. Woodcock
Targeted hydrolysis and decrepitation of Mn₃AlC precipitates: a route to a novel precursor of rare earth free MnAl–C permanent magnets
Journal of Physics D: Applied Physics 56, 415004/1-13 (2023) URL

B. Denkena, B. Bergmann, S. Worpenberg, J. Hufenbach, U. Kühn, C. Kunz
Zerspanbarkeit additiv gefertigter Titanbauteile
VDI-Z 165, 18-20 (2023) URL

H.S. Maurya, R.J. Vikram, K. Kosiba, K. Juhani, F. Sergejev, S. Suwas, K.G. Prashanth
Additive manufacturing of CMCs with bimodal microstructure
Journal of Alloys and Compounds 938, 168416/1-5 (2023) URL

T. Tran, D. Petrov, T. Phan, B. Tu, H. Nhat, H. Tran, B. Weise, J. Cwik, Y. Koshkid'ko, T. Manh, T. Hoang, N. Dang
Investigating the magnetic and magnetocaloric behaviors of LiSm(PO₃)₄
RSC Advances 13, 5753-5761 (2023) URL

S. Scudino, J. Han, R.N. Shahid, D. Bieberstein, T. Gemming, J. Wright
Strain fields as local probe for X-ray diffraction tomography: Non-destructive reconstruction of shear band paths in metallic glasses
Journal of Alloys and Compounds 958, 170484/1-8 (2023) URL

P. Birnbaum, S. Pilz, K. Neufeld, A. Kunke
Investigating the Static Recrystallization Behavior of 22MnB5 Manganese–Boron Steel through Stress Relaxation Analysis
Metals 13, 1646/1-16 (2023) URL

G. Kirste, J. Freudenberger, S. Wurmehl
Phase transformation in Mn₃Ga considering different degrees of deformation
Acta Materialia 258, 119205/1-10 (2023) URL

T.T. de Oliveira, M.L.D. Valente, I.G. Simões, R.L. Batalha, A.P. Macedo, C. Bolfarini, S. Pauly, A.C. dos Reis
Analysis of stress/strain distribution in dental mini‐implants manufactured by additive manufacturing and machining
Journal of Biomedical Materials Research Part B: Applied Biomaterials 111, 1751-1762 (2023) URL

N. Babacan, S. Pilz, S. Pauly, J. Hufenbach, T. Gustmann
Tailoring the superelastic properties of an additively manufactured Cu–Al–Mn shape memory alloy via adjusting the scanning strategy
Materials Science and Engineering A 862, 144412/1-11 (2023) URL

K. Kosiba, T. Gustmann, J.T. Kim, J. Seok, J. Jung, L. Beyer, S. Scudino, L. Giebeler, J. Han, J. Hufenbach
Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions
Journal of Alloys and Compounds 967, 171773/1-10 (2023) URL

K. Kosiba, D. Wolf, M. Bönisch, K. Neufeld, R. Hühne, T. Gustmann, J. Bednarčík, H. Chen, X. Han, V. Hoffmann, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating
Journal of Materials Science & Technology 156, 1-19 (2023) URL

J. Mich, D. Braig, T. Gustmann, C. Hasse, A. Scholtissek
A comparison of mechanistic models for the combustion of iron microparticles and their application to polydisperse iron-air suspensions
Combustion and Flame 256, 112949/1-13 (2023) URL

J. Ćwik, Y. Koshkid`ko, B. Weise, A. Czernuszewicz
High-field magnetic and magnetocaloric properties of pseudo-binary Er_1−xHo_xNi₂ (x = 0.25–0.75) solid solutions
Journal of Alloys and Compounds 968, 172297/1-9 (2023) URL

B. Yin, L. Li, S. Drescher, S. Seils, S. Nag, J. Freudenberger, W.A. Curtin
Solute misfit and solute interaction effects on strengthening: A case study in AuNi
Acta Materialia 257, 119118/1-10 (2023) URL

H. Chen, K. Kosiba, T. Lu, N. Yao, Y. Liu, Y. Wang, K. Prashanth, C. Suryanarayana
Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
Journal of Materials Science & Technology 136, 245-259 (2023) URL

K. Kosiba, D. Kononenko, D. Chernyavsky, L. Deng, J. Bednarcik, J. Han, J. van den Brink, H. Kim, S. Scudino
Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion
Journal of Alloys and Compounds 940, 168946/1-15 (2023) URL

D. Chernyavsky, D. Kononenko, J.H. Han, H.J. Kim, J. van den Brink, K. Kosiba
Machine learning for additive manufacturing: Predicting materials characteristics and their uncertainty
Materials & Design 227, 111699/1-10 (2023) URL

C. Sobrero, V. Remich, J. Cassineiro, M. Giordana, G. Abreu Faria, A. Liehr, J. Freudenberger, T. Niendorf, P. Krooß
Functional Properties of Highly Textured Fe–Ni–Co–Al–Ti–B Shape Memory Alloy Wires
Shape Memory and Superelasticity 9, 531–541 (2023) URL

S. Das, R.K. Dokala, B. Weise, P.K. Mishra, R. Medwal, R.S. Rawat, S. Thota
Phonon scattering and magnetic manifold switching in (GdSm)CrO₃
Physical Review Materials 7, 084410/1-18 (2023) URL

H. Chen, K. Kosiba, C. Suryanarayana, T. Lu, Y. Liu, Y. Wang, K.G. Prashanth
Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites
International Materials Reviews 68, 1192-1244 (2023) URL

N. Babacan, S. Pilz, J. Hufenbach, T. Gustmann
Effects of Remelting on the Properties of a Superelastic Cu–Al–Mn Shape Memory Alloy Fabricated by Laser Powder Bed Fusion
Shape Memory and Superelasticity 9, 447-459 (2023) URL

M. R, S. Singh, S. Ghosh, M.S. Seehra, B. Weise, W. Prellier, S. Thota
Magnetic structure and field-induced transitions in the triangular spin-1 antiferromagnet NiNb₂O₆: Observation of a triple point
Physical Review B 108, 224430/1-12 (2023) URL

W.C. Batalha, R.L. Batalha, K. Kosiba, C.S. Kiminami, P. Gargarella
Effect of scanning strategy on microstructure and mechanical properties of a biocompatible Ti–35Nb–7Zr–5Ta alloy processed by laser-powder bed fusion
Journal of Materials Research 38, 154-164 (2023) URL

J. Zeisig, V. Shtefan, L. Giebeler, U. Kühn, A. Gebert, J. Hufenbach
A Newly Designed High-Strength Tool Steel with High Wear and Corrosion Resistance
Materials 16, 1941/1-15 (2023) URL

M. Wolff, R. Wonneberger, K.E. Freiberg, A. Hertwig, J. Bonse, L. Giebeler, A. Koitzsch, C. Kunz, H. Weber, J. Hufenbach, F.A. Müller, S. Gräf
Formation of laser-induced periodic surface structures on Zr-based bulk metallic glasses with different chemical composition
Surfaces and Interfaces 42, Part A, 103305/1-11 (2023) URL

Q. Badosa, L. Mañosa, E. Vives, A. Planes, B. Weise, L. Beyer, E. Stern-Taulats
Demagnetizing field-induced magnetocaloric effect in Gd
Journal of Applied Physics 134, 113902/1-6 (2023) URL

S.M. Yang, J. Hufenbach, S. Scudino, P.P. Conway, C. Torres-Sanchez
Can Multifunctionality of Bioresorbable BMGs be Tuned by Controlling Crystallinity?
Key Engineering Materials 967, 131-136 (2023) URL

S.K. Jena, M. Seehra, T. Sarkar, M. Reehuis, A. Hoser, B. Weise, S. Thota
Spin-liquid state with precursor ferromagnetic clusters interacting antiferromagnetically in frustrated glassy tetragonal spinel Zn_0.8Cu_0.2FeMnO₄
Journal of Physics: Condensed Matter 35, 375802/1-18 (2023) URL

X. Luo, T. Song, A. Gebert, K. Neufeld, I. Kaban, H. Ma, W. Cai, H. Lu, D. Li, N. Li, Y. Li, C. Yang
Programming Crystallographic Orientation in Additive‐Manufactured Beta‐Type Titanium Alloy
Advanced Science 10, 2302884/1-11 (2023) URL

C. Pan, D. Zhu, H. Luo, K. Kosiba, S. Qu, C. Yang, X. Li
Fabrication of high-performance CoCrNi medium entropy alloy by laser powder bed fusion: The effect of grain boundary segregation
Composites Part B: Engineering 253, 110540/1-15 (2023) URL

K. Sun, H. Weber, G. Wang, Y.H. Wu, A.F. Andreoli, J.C. Tseng, J. Shen, B. Zhang, H.R. Jiang, L.M. Xu, X.D. Ma, N.Z. Zhang, Y.F. Jia, K. Kosiba, U. Kühn, S. Pauly
Structural heterogeneity in levitated glassy alloys with different undercoolings
Journal of Alloys and Compounds 947, 169532/1-10 (2023) URL

C. Pan, X. Li, H. Luo, K. Kosiba, S. Qu, C. Yang, D. Zhu, C. Zhang
Tuning the strength and ductility balance of a Co₃₂Cr₃₆Ni₃₂ medium entropy alloy fabricated by selective laser melting: Effect of segregations along grain boundaries
Materials Science and Engineering A 840, 14923/1-5 (2022) URL

U. Gebhardt, T. Gustmann, L. Giebeler, F. Hirsch, J. Hufenbach, M. Kästner
Additively manufactured AlSi10Mg lattices – Potential and limits of modelling as-designed structures
Materials & Design 220, 110796/1-15 (2022) URL

M. Seleznev, T. Gustmann, J.M. Friebel, U.A. Peuker, U. Kühn, J. Hufenbach, H. Biermann, A. Weidner
In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring
Additive Manufacturing Letters 3, 100099/1-7 (2022) URL

A. Hariharan, P. Goldberg, T. Gustmann, E. Maawad, S. Pilz, F. Schell, T. Kunze, C. Zwahr, A. Gebert
Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response
Materials & Design 217, 110618/1-19 (2022) URL

Y. Liu, J. Meng, L. Zhu, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, K. Kosiba
Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions
Additive Manufacturing 54, 102772/1-16 (2022) URL

S. Thota, M.S. Seehra, M.R. Chowdhury, H. Singh, S. Ghosh, S.K. Jena, P. Pramanik, T. Sarkar, R.S. Rawat, R. Medwal, B. Weise
Unraveling the nature of ferrimagnetism and associated exchange interactions in distorted honeycomb Ni₄Nb₂O₉
Physical Review B 106, 134418/1-12 (2022) URL

Ravi Kiran Dokala, S. Das, Bruno Weise, Rohit Medwal, Rajdeep Singh Rawat, Subhash Thota
Magnetization Reversal, Field-Induced Transitions and H-T Phase Diagram of Y_1-xCe_xCrO₃
Journal of Physics: Condensed Matter 34, 065801/1-12 (2022) URL

S.K. Jena, T. Sarkar, M. RoyChowdhury, B. Weise, Y. Qi, S. Thota
Slow spin dynamics of cluster-glass spinel Zn(Fe_1-xRu_x)₂O₄: role of Jahn-Teller active spin-1/2 Cu²⁺ ions at B-sites
Journal of Physics: Condensed Matter 34, 405801/1-14 (2022) URL

M.R. Chowdhury, M. Seehra, P. Pramanik, S. Ghosh, T. Sarkar, B. Weise, S. Thota
Antiferromagnetic short-range order and cluster spin-glass state in diluted spinel ZnTiCoO₄
Journal of Physics: Condensed Matter 34, 275803/1-16 (2022) URL

L. Liu, S. Huang, W. Shi, X. Sun, J. Pang, Q. Lu, Y. Yang, L. Xi, L. Deng, S. Oswald, Y. Yin, L. Liu, L. Ma, O.G. Schmidt, Y. Shi, L. Zhang
Single “Swiss-roll” microelectrode elucidates the critical role of iron substitution in conversion-type oxides
Science Advances 8, eadd6596/1-11 (2022) URL

P. Thirathipviwat, Y. Onuki, G. Song, J. Han, S. Sato
Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy
Journal of Alloys and Compounds 890, 161816/1-8 (2022) URL

J. Ćwik, Y. Koshkid’ko, K. Nenkov, E. Tereshina-Chitrova, B. Weise, K. Kowalska
Low-Temperature Magnetothermodynamics Performance of Tb_1-xEr_xNi₂ Laves-Phases Compounds for Designing Composite Refrigerants
Crystals 12, 931/1-11 (2022) URL

M. R, M. Seehra, S. Ghosh, R. Medwal, R. Rawat, B. Weise, E. Choi, S. Thota
Determination of the Tricritical point, H-T phase diagram and Exchange Interactions in the Antiferromagnet MnTa₂O₆
Journal of Physics: Condensed Matter 34, 155801/1-12 (2022) URL

A. Tirunilai, K. Weiss, J. Freudenberger, M. Heilmaier, A. Kauffmann
Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures
Metals 12, 514/1-6 (2022) URL

H. Maurya, K. Kosiba, K. Juhani, F. Sergejev, K. Prashanth
Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Additive Manufacturing 58, 103013/1-13 (2022) URL

D. Schliephake, C. Lopes, Y.M. Eggeler, H. Chen, J. Freudenberger, D. Bayoumy, A.J. Huang, A. Kauffmann
Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy
Journal of Alloys and Compounds 924, 166499/1-11 (2022) URL

K. Lu, A. Chauhan, D. Litvinov, A. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy
Journal of Materials Science & Technology 100, 237-245 (2022) URL

Z. Wang, X. Lin, L. Wang, H. Yang, Y. Zhou, J.K. Hufenbach, K. Kosiba, T. Zhang, W. Huang
Novel high-strength Al-Cu-Cd alloy fabricated by arc-directed energy deposition: Precipitation behavior of the Cd phase and grain evolution
Additive Manufacturing 60, Part B, 103278/1-15 (2022) URL

P. Thirathipviwat, S. Sato, G. Song, J. Bednarcik, K. Nielsch, J. Jung, J. Han
A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system
Scripta Materialia 210, 114470/1-5 (2022) URL

T. Lu, N. Yao, H. Chen, B. Sun, X. Chen, S. Scudino, K. Kosiba, X. Zhang
Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
Additive Manufacturing 56, 102918/1-16 (2022) URL

H. Chen, T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Materials Science and Engineering A 833, 142512/1-16 (2022) URL

K. Kosiba
Thermoplastic embossing device to probe rheological changes of supercooled metallic liquids during rapid heating
Review of Scientific Instruments 93, 033901/1-9 (2022) URL

P. Pramanik, M. Reehuis, M. Tovar, A. Hoser, J. Hoffmann, Y. Chen, J. Lin, B. Weise, A. Waske, S. Thota
Strong correlation between structure and magnetic ordering in tetragonally distorted off-stoichiometric spinels Mn_1.15Co_1.85O₄ and Mn_1.17Co_1.60Cu_0.23O₄
Physical Review Materials 6, 034407/1-12 (2022) URL

J. Freudenberger, F. Thiel, D. Utt, K. Albe, A. Kauffmann, S. Seils, M. Heilmaier
Solid solution strengthening in medium- to high-entropy alloys
Materials Science and Engineering A 861, 144271/1-11 (2022) URL

H. Chen, Y. Liu, Y. Wang, Z. Li, D. Wang, K. Kosiba
Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy
Materials & Design 224, 111324/1-12 (2022) URL

R. Batalha, V. Pinotti, O. Alnoaimy, W. Batalha, T. Gustmann, K. Kosiba, S. Pauly, C. Bolfarini, C. Kiminami, P. Gargarella
Microstructure and properties of TiB2-reinforced Ti–₃₅Nb–₇Zr–₅Ta processed by laser-powder bed fusion
Journal of Materials Research 37, 259–271 (2022) URL

B. Paul, A. Hofmann, S. Weinert, F. Frank, U. Wolff, M. Krautz, J. Edelmann, M.W. Gee, C. Reeps, J. Hufenbach
Effect of blasting treatments on the surface topography and cell adhesion on biodegradable FeMn-based stents processed by laser powder bed fusion
Advanced Engineering Materials 24, 1-17 (2022) URL

S. Das, R. Dokala, B. Weise, R. Medwal, R. Rawat, P. Mishra, S. Thota
Effect of Ce substitution on the local magnetic ordering and phonon instabilities in antiferromagnetic DyCrO₃ perovskites
Journal of Physics: Condensed Matter 34, 345803/1-16 (2022) URL

L. Feng, J. Freudenberger, K. Nielsch, T.G. Woodcock
Elimination of the non-recrystallised regions in the extruded MnAl-C-Ni magnet using pulverised melt-spun ribbons
Journal of Alloys and Compounds 897, 163248/1-6 (2022) URL

R. Schaarschuch, C.-G. Oertel, A. Pukenas, S. Zhou, G. Cao, J. Freudenberger, W. Gan, E. Maawad, R. Chulist, W. Skrotzki
Low temperature deformation mechanisms of polycrystalline CoZr and Co₃₉Ni₁₁Zr₅₀ B2-type intermetallic compounds
Acta Materialia 223, 117489/1-13 (2022) URL

A. Pukenas, P. Chekhonin, J. Scharnweber, R. Chulist, C. Oertel, J. Freudenberger, W. Skrotzki
TiAl-based semi-finished material produced by reaction annealing of Ti/Al layered composite sheets
Materials Today Communications 30, 103083/1-9 (2022) URL

P. Wang, S. Yu, J. Shergill, A. Chaubey, J. Eckert, K.G. Prashanth, S. Scudino
Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Acta Metallurgica Sinica (English Letters) 35, 389–396 (2022) URL

S. Pilz, T. Gustmann, F. Günther, M. Zimmermann, U. Kühn, A. Gebert
Controlling the Young’s modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF
Materials & Design 216, 110516/1-11 (2022) URL

F. Kochta, U. Kühn, S. Henschel, L. Giebeler, T. Gemming, K. Neufeld, C. Leyens, L. Krüger, J. Hufenbach
Novel Fe-0.3Cr-0.4Mo-1.5Mn–3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading
Materials Science and Engineering A 829, 142156/1-9 (2022) URL

J. Ćwik, Y. Koshkid’ko, K. Nenkov, E. Tereshina-Chitrova, M. Małecka, B. Weise, K. Kowalska
Magnetocaloric performance of the three-component Ho_1-xEr_xNi₂ (x = 0.25, 0.5, 0.75) Laves phases as composite refrigerants
Scientific Reports 12, 12332/1-11 (2022) URL

U. Kühn, J. Sander, K.N. Gabrysiak, L. Giebeler, K. Kosiba, S. Pilz, K. Neufeld, A.V. Boehm, J. Hufenbach
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting
Materials 15, 7266/1-10 (2022) URL

P. Krooß, C. Lauhoff, T. Gustmann, T. Gemming, C. Sobrero, F. Ewald, F. Brenne, T. Arold, M. Nematolahi, M. Elahinia, J. Thielsch, J. Hufenbach, T. Niendorf
Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation
Shape Memory and Superelasticity 8, 452–462 (2022) URL

T. He, S. Gouripriya, P. Tandaiya, T. Lu, H. Lu, N. Ciftci, V. Uhlenwinkel, S. Scudino
Martensite stabilization in bulk metallic glass composites with shape memory crystals
Journal of Alloys and Compounds 929, 167260/1-11 (2022) URL

N. Babacan
Shape Memory Characteristics of Silver-Added Fe–30Mn–6Si Alloy
Transactions of the Indian Institute of Metals 75, 1595–1601 (2022) URL

J. Zeisig, L. Giebeler, A. Gebert, S. Oswald, U. Kühn, J. Hufenbach
Novel Corrosion‐Resistant Tool Steels with Superior Wear Properties
Advanced Engineering Materials 24, 2200293/1-14 (2022) URL

T. He, T. Lu, D. Şopu, X. Han, H. Lu, K. Nielsch, J. Eckert, N. Ciftci, V. Uhlenwinkel, K. Kosiba, S. Scudino
Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy
Journal of Materials Science & Technology 114, 42-54 (2022) URL

B. Paul, A. Lode, A. Placht, A. Voß, S. Pilz, U. Wolff, S. Oswald, A. Gebert, M. Gelinsky, J. Hufenbach
Cell–Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release
ACS Applied Materials & Interfaces 14, 439–451 (2022) URL

P. Thirathipviwat, S. Sato, G. Song, J. Bednarcik, K. Nielsch, J. Han
Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system
Materials Science and Engineering A 823, 141775/1-7 (2021) URL

K. Lu, A. Chauhan, A. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading
Acta Materialia 215, 117089/1-12 (2021) URL

T. Oka, K. Yamanaka, K. Sudo, L. Dadiel, J. Ogawa, K. Yokoyama, W. Häßler, J. Noudem, K. Berger, N. Sakai, M. Miryala, M. Murakami
Shielding Effect on Flux Trapping in Pulsed-Field Magnetizing for Mg-B Bulk Magnet
Journal of Physics: Conference Series 1975, 012019/1-6 (2021) URL

N. Babacan, F. Kochta, V. Hoffmann, T. Gemming, U. Kühn, L. Giebeler, A. Gebert, J. Hufenbach
Effect of silver additions on the microstructure, mechanical properties and corrosion behavior of biodegradable Fe-30Mn-6Si
Materials Today Communications 28, 102689/1-11 (2021) URL

K. Lu, A. Chauhan, M. Walter, A. Tirunilai, M. Schneider, G. Laplanche, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Scripta Materialia 194, 113667/1-5 (2021) URL

Z. Wang, S.Y. Tang, S. Scudino, Y.P. Ivanov, R.T. Qu, D. Wang, C. Yang, W.W. Zhang, A.L. Greer, J. Eckert, K.G. Prashanth
Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off
Additive Manufacturing 37, 101725/1-14 (2021) URL

L. Beyer, B. Weise, J. Freudenberger, J. Hufenbach, T. Gottschall, M. Krautz
Evaluation of the effective temperature change in Gd-based composite wires assessed by static and pulsed-field magnetic measurements
Journal of Magnetism and Magnetic Materials 536, 168115/1-6 (2021) URL

M. Romero da Silva, P. Gargarella, A. Plaine, S. Pauly, C. Bolfarini
Influence of oxygen and plastic deformation on the microstructure and the hardness of a Ti–Nb–Ta–Zr–O Gum Metal
Materials Science and Engineering A 828, 142122/1-15 (2021) URL

L. Deng, K. Kosiba, R. Limbach, L. Wondraczek, U. Kühn, S. Pauly
Plastic deformation of a Zr-based bulk metallic glass fabricated by selective laser melting
Journal of Materials Science & Technology 60, 139-146 (2021) URL

N. Soltani, A.D.C. Permana, S. Donath, D. Mikhailova
Dealloying approach for the rapid synthesis of Sn-based intermetallic electrodes for lithium-ion batteries
Materials Today Communications 29, 102965/ (2021) URL

N. Babacan, S. Pauly, T. Gustmann
Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy
Materials & Design 203, 109625/1-25 (2021) URL

T. Lu, T. He, P. Zhao, K. Sun, A.F. Andreoli, H. Chen, W. Chen, Z. Fu, S. Scudino
Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl_0.25Mn_0.25 high-entropy alloy through cold rolling and annealing treatment
Journal of Materials Processing Technology 289, 116945/1-11 (2021) URL

R. Ali, F. Ali, A. Zahoor, R. Shahid, N. Tariq, T. He, M. Shahzad, Z. Asghar, A. Shah, A. Mahmood, H. Awais
Effect of sintering path on the microstructural and mechanical behavior of aluminum matrix composite reinforced with pre-synthesized Al/Cu core-shell particles
Journal of Alloys and Compounds 889, 161531/1-10 (2021) URL

P. Xue, Y. Huang, S. Pauly, F. Guo, Y. Ren, S. Jiang, F. Guo, S. Guo, H. Fan, Z. Ning, J. Sun
Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction
Journal of Alloys and Compounds 871, 159570/1-9 (2021) URL

K. Gabrysiak, T. Gustmann, J. Freudenberger, K. Neufeld, L. Giebeler, C. Leyens, U. Kühn
Development and characterization of a metastable Al-Mn-Ce alloy produced by laser powder bed fusion
Additive Manufacturing Letters 1, 100017/1-6 (2021) URL

S. Chen, Q. Liu, T. He, G. Lei
Inhomogeneity of microstructure and mechanics of laser welded CoCrFeNiAl_0.3 high entropy alloy
Materials Letters 301, 130269/1-3 (2021) URL

J. Wang, I. Kaban, V. Levytskyi, R. Li, J. Han, M. Stoica, R. Gumeniuk, K. Nielsch
Ultra-high strength Co-Ta-B bulk metallic glasses: glass formation, thermal stability and crystallization
Journal of Alloys and Compounds 860, 158398/1-10 (2021) URL

N. Babacan, E. Yurtkuran, A. Balci, M. Bieda-Niemiec, A. Jarzębska
Effects of Non-isothermal Aging on Microstructure and Mechanical Properties of WE43 Alloy
Journal of Materials Engineering and Performance 30, 7909–7916 (2021) URL

M. da Silva, P. Gargarella, A. Plaine, J. Zeisig, S. Pauly, U. Kühn, C. Bolfarini
Microstructural evolution and properties of a Ti-Nb-Ta-Zr-O prepared by high-pressure torsion
Journal of Alloys and Compounds 864, 158828/1-13 (2021) URL

K. Sun, L.M. Xu, H. Weber, G. Wang, J.C. Tseng, J. Shen, S.W. Wu, X.L. Bian, K. Kosiba, U. Kühn, S. Pauly
A refined local structure in a metallic glass tailored via flash-annealing
Materials Characterization 178, 111214/1-10 (2021) URL

U. Gebhardt, M. Kästner, J. Hufenbach, U. Kühn, M. Berner, S. Holtzhausen
Virtual Testing of Geometrically Imperfect Additively Manufactured Lattice Structures
Proceedings in Applied Mathematics and Mechanics (PAMM) 20, e202000090/1-2 (2021) URL

M. Calin, J. Vishnu, P. Thirathipviwat, M.-M. Popa, M. Krautz, G. Manivasagam, A. Gebert
Tailoring biocompatible Ti-Zr-Nb-Hf-Si metallic glasses based on high-entropy alloys design approach
Materials Science and Engineering C 121, 111733/1-7 (2021) URL

H. Chen, D. D. Gu, H. Zhang, L. Xi, T. Lu, L. Deng, U. Kühn, K. Kosiba
Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
Journal of Materials Processing Technology 289, 116959/1-14 (2021) URL

T. He, N. Ciftci, V. Uhlenwinkel, S. Scudino
Synthesis of Bulk Zr₄₈Cu₃₆Al₈Ag₈ Metallic Glass by Hot Pressing of Amorphous Powders
Journal of Manufacturing and Materials Processing 5, 23/1-13 (2021) URL

J. Cwik, Y. Koshkid’Ko, M. Małecka, B. Weise, M. Krautz, A. Mikhailova, N. Kolchugina
Magnetocaloric prospects of mutual substitutions of rare-earth elements in pseudobinary Tb_1-xHo_xNi₂ compositions (x = 0.25-0.75)
Journal of Alloys and Compounds 886, 161295/ (2021) URL

A. Stepanov, S. Fedorenko, R.G. Mendes, M.H. Rümmeli, L. Giebeler, B. Weise, T. Gemming, S. Dutz, D. Zahn, I. Ismaev, R. Amirov, K. Kholin, A. Voloshina, A. Sapunova, S. Solovieva, A. Mustafina
T2- and T1 relaxivities and magnetic hyperthermia of iron-oxide nanoparticles combined with paramagnetic Gd complexes
Journal of Chemical Sciences 133, 43/1-10 (2021) URL

F.C. Ewald, F. Brenne, T. Gustmann, M. Vollmer, P. Krooß, T. Niendorf
Laser Powder Bed Fusion Processing of Fe-Mn-Al-Ni Shape Memory Alloy—On the Effect of Elevated Platform Temperatures
Metals 11, 185/1-9 (2021) URL

H. Chen, D. Gu, Q. Ge, X. Shi, H. Zhang, R. Wang, H. Zhang, K. Kosiba
Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
International Journal of Minerals, Metallurgy and Materials 28, 462-474 (2021) URL

M. Costa Valente, T. Oliveira, S. Kreve, R. Batalha, D. Oliveira, S. Pauly, C. Bolfarini, L. Bachmann, A. Reis
Analysis of the mechanical and physicochemical properties of Ti‐6Al‐4 V discs obtained by selective laser melting and subtractive manufacturing method
Journal of Biomedical Materials Research Part B-Applied Biomaterials 109, 420-427 (2021) URL

R. Maruthi, S. Ghosh, M.S. Seehra, D.C. Joshi, M.R. Chowdhury, R. Medwal, R.S. Rawat, B. Weise, S. Thota
Magnetic field-temperature phase diagram, exchange constants and specific heat exponents of the antiferromagnet MnNb₂O₆
Journal of Physics: Condensed Matter 33, 345801/1-9 (2021) URL

J. Kimme, J. Zeisig, A. Fröhlich, V. Kräusel
Technology Innovation for the Manual Laser Cladding of High-Alloy Tool Steels
Metals 11, 1820/1-10 (2021) URL

S. Chen, T. He, L. Zhao, D. Tsang
Microstructure and mechanical response of gas tungsten arc welded joints comprising a UNS N10003 alloy with different heat inputs
Materials Science and Engineering A 803, 140494 (2021) URL

A.M. Chirkova, K.P. Skokov, Y. Skourski, F. Scheibel, A.Y. Karpenkov, A.S. Volegov, N.V. Baranov, K. Nielsch, L. Schultz, K.-H. Müller, T.G. Woodcock, O. Gutfleisch
Magnetocaloric properties and specifics of the hysteresis at the first-order metamagnetic transition in Ni-doped FeRh
Physical Review Materials 5, 064412/1-8 (2021) URL

H. Thota, R. Jeyaraam, L. Bairi, A. Tirunilai, A. Kauffmann, J. Freudenberger, M. Heilmaier, S. Mandal, S. Vadlamani
Grain boundary engineering and its implications on corrosion behavior of equiatomic CoCrFeMnNi high entropy alloy
Journal of Alloys and Compounds 888, 161500/1-15 (2021) URL

R. He, T. Zhu, P. Ying, J. Chen, L. Giebeler, U. Kühn, J. Grossman, Y. Wang, K. Nielsch
High‐Pressure‐Sintering‐Induced Microstructural Engineering for an Ultimate Phonon Scattering of Thermoelectric Half‐Heusler Compounds
Small 17, 2102045/1-9 (2021) URL

A. Meißner, T. Voigtländer, S.M. Meißner, U. Kühn, S. Schneider, A. Shnirman, G. Weiss
Acoustic properties of metallic glasses at low temperatures: Tunneling systems and their dephasing
Physical Review B 103, 224209/1-11 (2021) URL

T. Samanta, B. Weise, L. Beyer, M. Krautz
Hydrostatic pressure induced giant enhancement of entropy change as driven by structural transition in Mn_0.9Fe_0.2Ni_0.9Ge_0.93Si_0.07
Journal of Applied Physics 129, 023901/1-6 (2021) URL

H. Chen, D. Gu, L. Deng, T. Lu, U. Kühn, K. Kosiba
Laser additive manufactured high-performance Fe-based composites with unique strengthening structure
Journal of Materials Science & Technology 89, 242-252 (2021) URL

M. Otto, S. Pilz, A. Gebert, U. Kühn, J. Hufenbach
Effect of Build Orientation on the Microstructure, Mechanical and Corrosion Properties of a Biodegradable High Manganese Steel Processed by Laser Powder Bed Fusion
Metals 11, 944/1-13 (2021) URL

P. Wang, F.-H. Chen, J. Eckert, S. Pilz, S. Scudino, K.G. Prashanth
Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
Journal of Central South University 28, 1068-1077 (2021) URL

F. Kochta, A. Gebert, U. Kühn, S. Oswald, T. Gemming, C. Leyens, J. Hufenbach
Improved corrosion behavior of a novel Fe85Cr4Mo8V2C1 tool steel processed by laser powder bed fusion
Journal of Alloys and Compounds 867, 158887/1-10 (2021) URL

P. Wang, J.F. Qi, Z.W. Chen, C.S. Lao, T.B. He, T.W. Lu, P. Gargarella, S. Scudino
Microstructure and mechanical properties of novel high-entropy alloy particle reinforced aluminum matrix composites fabricated by selective laser melting
Journal of Alloys and Compounds 868, 159197/1-5 (2021) URL

H. Zhang, D. D. Gu, C. Ma, M. Guo, J. Yang, H. Zhang, H. Chen, C. Li, K. Svynarenko, K. Kosiba
Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
Materials Science and Engineering A 802, 140431/1-12 (2021) URL

S. Chen, T. He, X. Wu, G. Lei
Synergistic effect of carbides and residual strain on the mechanical behavior of Ni-17Mo-7Cr superalloy made by wire-arc additive manufacturing
Materials Letters 287, 129291/1-5 (2021) URL

A. de Araujo, S. Pauly, R. Batalha, F. Coury, C. Kiminami, V. Uhlenwinkel, P. Gargarella
Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility
Additive Manufacturing 41, 101960/1-16 (2021) URL

K.N. Gabrysiak, U. Gaitzsch, T. Weißgärber, B. Kieback
Oxidation and Hot Gas Corrosion of Al–Cr–Fe–Ni‐Based High‐Entropy Alloys with Addition of Co and Mo
Advanced Engineering Materials 23, 2100237/1-8 (2021) URL

L. Deng, L. Zhang, K. Kosiba, R. Limbach, L. Wondraczek, G. Wang, D. Gu, U. Kühn, S. Pauly
CuZr-based bulk metallic glass and glass matrix composites fabricated by selective laser melting
Journal of Materials Science & Technology 81, 139-150 (2021) URL

S.K. Pal, K.-H. Müller, L. Schultz
Spin reorientation temperature of ultrafine and nanostructured Nd₂Fe₁₄B particles obtained by surfactant-assisted ball milling
Physics Letters A 385, 126954/1-5 (2021) URL

P. Wang, Y. Lei, J. Qi, S. Yu, R. Setchi, M. Wu, J. Eckert, H. Li, S. Scudino
Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5 Mg-1Si Alloy Manufactured by Selective Laser Melting
Materials 14, 7048/1-11 (2021) URL

K. Kosiba, K.G. Prashanth, S. Scudino
Phase Formation, Microstructure and Mechanical Properties of Mg₆₇Ag₃₃ as Potential Biomaterial
Metals 11, 461/1-10 (2021) URL

Monographs

J. Freudenberger, M. Heilmaier
Materialkunde der Nichteisenmetalle und -legierungen
(2020), URL

Monograph Contributions

2024 - J. Freudenberger, L. Tikana, W.F. Hosford, Editor(s): T. Chakraborty
Alloys: Copper. In: Encyclopedia of Condensed Matter Physics (2nd Edition)
| Volume: 5 | P. 601-634 | URL

2021 - J. Freudenberger, M. Heilmaier, U. Wendt, Editor(s): K.-H. Grote, H. Hefazi
Atomic Structure and Microstructure Characterization, In: Springer Handbook of Mechanical Engineering
| P. 131-164 | URL

2018 - J. Freudenberger, H. Warlimont, Editor(s): H. Warlimont, W. Martienssen
Copper and Copper Alloys, In: Springer Handbook of Materials Data, Kap. B.12
| P. 293-305 | URL

2009 - J. Freudenberger, J. Goellner, M. Heilmaier, G. Mook, H. Saage, V. Srivastava, U. Wendt, Editor(s): K.-H. Grote, E.K. Antonsson
Materials science and technology, In: Springer Handbook of Mechanical Engineering
| P. 75-222 | URL

Invited Talks

J. Hufenbach
Design of novel high-carbon steels for additive manufacturing
Scientific colloquium of the Collaborative Research Centre / Transregio (TRR) 375 | Collaborative Research Centre / Transregio (TRR) 375
Kaiserslautern, Germany, 04.06.2025

B. Paul, A. Bahrami, V. Hahn, A. Quade, F. Hempel, J. Hufenbach, K. Nielsch
Biodegradierbare ZnO-Beschichtung mittels Atomlagenabscheidung für temporäre Fe-basierte Implantatmaterialien
Europäische Forschungsgesellschaft Dünne Schichten e.V. Workshop „Implantate – Wenn die Antwort in der Schicht steckt!“ | Aesculap Akademie
Tuttlingen, Germany, 27.02.2024 - 27.02.2024

M. Otto
Optimisation of Fe-Mn-C steels for biodegradable vascular implant applications
IMDEA Materials-Seminar | IMDEA Materials
Madrid, Spain, 23.05.2024 - 23.05.2024

M. Calin, J. Vishnu, M. Krautz, A. Gebert
New MRI-compatible metallic materials for miniaturized implants
TMS 2024 Annual Meeting & Exhibition | Hyatt Regency Orlando
Orlando, FL, USA, 05.03.2024

M. Otto
Fe-Mn-C steels for biodegradable vascular implant applications
guest seminar | IMDEA Materials Institute
Madrid, Spain, 23.05.2024 - 23.05.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laser bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Wien
Vienna, Austria, 03.07.2024 - 03.07.2024

J. Hufenbach, B. Paul, K. Kosiba
Werkstoffentwicklung für die additive Fertigung
effiPrint Frühjahrsveranstaltung | Professur für Umformtechnik, Technische Universität Chemnitz
Chemnitz, Germany, 14.03.2024 - 14.03.2024

M. Otto
Optimisation of Fe-Mn-C steels for biodegradable vascular implant applications
CIC nanoGUNE-Seminar | CIC nanoGUNE
Donastia-San Sebastian, Spain, 27.05.2024

K. Kosiba, J. Bednarčík, S. Scudino
HEXRD mapping for advanced characterization of metals : 2D strain tensor and phase distribution
DESY Photon Science Users' Meeting | Deutsches Elektronen-Synchrotron (DESY)
Hamburg, Germany, 24.01.2024

K. Kosiba, D. Kononenko, J. van den Brink, D. Cherniavskii, J. Hufenbach
Machine learning meets metal additive manufacturing: from process control to materials design
Summer School Materials 4.0 | Technische Universität Dresden
Dresden, Germany, 29.08.2024 - 29.08.2024

K. Kosiba, S. Scudino, J. Hufenbach, Jozef Bednarcik
Exploring the microstructure of additively manufactured metals via high energy X-ray diffraction 
School of XFEL and synchrotron radiation users 2024 | Pavol Jozef Safarik University
Kosice, Slovakia, 14.10.2024 - 17.10.2024

B. Paul, A. Bahrami, V. Hahn, A. Quade, F. Hempel, J. Hufenbach, K. Nielsch
Biodegradierbare ZnO-Beschichtung mittels Atomlagenabscheidung für temporäre Fe-basierte Implantatmaterialien
EFDS Workshop „Implantate – Wenn die Antwort in der Schicht steckt!“ | Aesculap Akademie
Tuttlingen, Germany, 27.02.2024 - 27.02.2024

J. Hufenbach, K. Kosiba
Design of high-carbon tool steels adapted to laserpowder bed fusion
ISNNM 2024, The 18th International Symposium on Novel and Nano Materials | TU Vienna
Vienna, Austria, 03.07.2024 - 03.07.2024

K. Kosiba, D. Wolf, M. Bönisch, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Designing a wear-resistant tool steel for laser powder bed fusion
Alloys for Additive Manufacturing Symposium (AAMS) 2024 | Ecole Polytechnique Palaiseau (Paris), France
Paris, France, 03.09.2024 - 06.09.2024

U. Kühn, J. Sander, J. Freudenberger, J. Hufenbach
Werkstoffentwicklung für additive Verfahren
Symposium Werkstoffprüfung | Firma Hegewald & Peschke Meß- und Prüftechnik GmbH
Nossen, Germany, 21.09.2023

M. Otto
Microstructure-property relationships of Fe-Mn-C alloys for bioresorbable vascular implants
FEMS EUROMAT 2023 | Goethe Campus Westend
Frankfurt/Main, Germany, 04.09.2023 - 04.09.2023

K. Kosiba
Machine learning for laser powder bed fusion: toward material synthesis by design
Machine learning for laser powder bed fusion: toward material synthesis by design | International conference on advanced materials and manufacturing processes (ICAMMP) 2023, Jawaharlal Nehru Technological University Gurajada Vizianagaram (JNTUGV), College of Engineering, Vizianagram 535003 Andhra Pradesh, India
03.03.2023

A. Gebert, S. Pilz, M. Roshchina, N. Fernandez Navas, A. Akman, J. Vishnu, K. Kosiba, U. Kühn, C.J. Querebillo, M. Calin
Challenges and potentials of novel glassy and beta-type Ti alloys for biomedical use
Thermec'2023 | Technische Universität Wien
Vienna, Austria, 03.07.2023

K. Kosiba, D. Chernyavsky, D. Kononenko, J. van den Brink, J. Hufenbach
Machine learning meets additive manufacturing: toward material synthesis by design
Werkstoffwissenschaftliches Kolloquium Sommersemester 2023 | Technische Universität Bergakademie Freiberg
Freiberg, Germany, 19.06.2023 - 19.06.2023

M. Calin, J. Vishnu, M. Popa, M. Krautz, A. Gebert
Design and properties of multi-principal element glassy alloys for biomedical applications
Thermec‘2023 – International Conference on Processing & Manufacturing of advanced Materials
Vienna, Austria, 02.07.2023

J. Hufenbach, U. Kühn, K. Kosiba
Designing tool steels for laser powder bed fusion
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

J. Hufenbach, M. Otto, K. Kosiba, B. Paul
Effect of laser powder bedfusion on a novel biodegradable Fe-based alloy for implant applications
IMR-Workshop, Institute of Metal Research (IMR) | Chinese Academy of Sciences, China
04.08.2022 - 07.08.2022

K. Kosiba, D. Chernyavsky, J. van den Brink, D. Kononenko
Applying machine learning for data driven material synthesis via metal additive manufacturing
4th International Academic Forum on Advanced Materials and Intelligent Manufacturing (AMIM) | Shanghai University of Engineering Science (SUES), China
Shanghai, China, 16.10.2022

T. Gustmann
Prozess-Gefüge-Eigenschaftskorrelationen bei der additiven Fertigung von NiTi- und Kupfer-Basis-Formgedächtnislegierungen
Werkstoffwissenschaftliches Kolloquium im WS 2021/22 | TU Bergakademie Freiberg (Institut für Werkstofftechnik)
31.01.2022 - 31.01.2022

K. Kosiba, D. Chernyavsky, J. Han, H.J. Kim, J. van den Brink, D. Kononenko
A machine learning model for data-driven material synthesis via metal additive manufacturing
The 17th International Symposium on Novel and Nano Materials (ISNNM2022) | Phoenix Jeju, Jeju, Republic of Korea
15.11.2022 - 15.11.2022

J. Hufenbach, M. Otto, B. Paul
Novel Biodegradable FeMn-Based Alloy for Additively ManufacturedImplants
3rd International Conference on Materials Science & Engineering
18.04.2022 - 22.04.2022

K. Kosiba
Laser powder bed fusion of advanced materials and their characterization
Seminar at Korea Institute of Materials Science | Korea Institute of Materials Science
26.10.2022

J. Hufenbach, T. Gustmann, K. Kosiba, U. Kühn
Novel tool steels for additve manufacturing
Online Kolloquium Advanced Manufacturing für den „InnovationsCampus Mobilität der Zukunft“ | Karlsruher Institut für Technologie und Universität Stuttgart
19.01.2022

M. Otto, A. Gebert, B. Paul, J. Freudenberger, J. Hufenbach
Microstructural, mechanical and biodegradation properties of as-cast and hot forged Fe-Mn-C alloys
International Symposium on Biodegradable Metals/Biometals 2022
24.08.2022 - 29.08.2022

B. Paul
Influence of different pre-conditioning on additively manufactured, biodegradable Fe-based stents
13th Biometals
22.08.2021 - 27.08.2021

T. Gustmann
Laser Powder Bed Fusion of Cu-based Shape Memory Alloys - Unlocking the Performance of a Unique Class of Materials
Virtual Workshop Program INVIRTA 2021 - Powder Materials for Additive Manufacturing - 8. Workshop (Manufacturing and processing of copper powders for AM processes) | INVIRTA - Virtual Workshop Program
07.09.2021 - 07.09.2021

J. Hufenbach, K. Kosiba, T. Gustmann, U. Kühn
Novel steels for additive manufacturing of tools
24. INTERNATIONALES DRESDNER LEICHTBAUSYMPOSIUM
17.06.2021 - 18.06.2021