Zeitschriften

K. Kosiba, D. Wolf, M. Bönisch, K. Neufeld, R. Hühne, T. Gustmann, J. Bednarčík, H. Chen, X. Han, V. Hoffmann, L. Beyer, U. Kühn, S. Scudino, L. Giebeler, J. Hufenbach
Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating
Journal of Materials Science & Technology 156, 1-19 (2023) URL

K. Kosiba, D. Kononenko, D. Chernyavsky, L. Deng, J. Bednarcik, J. Han, J. van den Brink, H. Kim, S. Scudino
Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion
Journal of Alloys and Compounds 940, 168946/1-15 (2023) URL

S. Scudino, J. Han, R.N. Shahid, D. Bieberstein, T. Gemming, J. Wright
Strain fields as local probe for X-ray diffraction tomography: Non-destructive reconstruction of shear band paths in metallic glasses
Journal of Alloys and Compounds 958, 170484/ (2023) URL

P. Wang, S. Yu, J. Shergill, A. Chaubey, J. Eckert, K.G. Prashanth, S. Scudino
Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Acta Metallurgica Sinica (English Letters) 35, 389–396 (2022) URL

T. Lu, N. Yao, H. Chen, B. Sun, X. Chen, S. Scudino, K. Kosiba, X. Zhang
Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
Additive Manufacturing 56, 102918/1-16 (2022) URL

T. He, S. Gouripriya, P. Tandaiya, T. Lu, H. Lu, N. Ciftci, V. Uhlenwinkel, S. Scudino
Martensite stabilization in bulk metallic glass composites with shape memory crystals
Journal of Alloys and Compounds 929, 167260/1-11 (2022) URL

T. He, T. Lu, D. Şopu, X. Han, H. Lu, K. Nielsch, J. Eckert, N. Ciftci, V. Uhlenwinkel, K. Kosiba, S. Scudino
Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy
Journal of Materials Science & Technology 114, 42-54 (2022) URL

Z. Wang, S.Y. Tang, S. Scudino, Y.P. Ivanov, R.T. Qu, D. Wang, C. Yang, W.W. Zhang, A.L. Greer, J. Eckert, K.G. Prashanth
Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off
Additive Manufacturing 37, 101725/1-14 (2021) URL

T. He, N. Ciftci, V. Uhlenwinkel, S. Scudino
Synthesis of Bulk Zr₄₈Cu₃₆Al₈Ag₈ Metallic Glass by Hot Pressing of Amorphous Powders
Journal of Manufacturing and Materials Processing 5, 23/1-13 (2021) URL

P. Wang, J.F. Qi, Z.W. Chen, C.S. Lao, T.B. He, T.W. Lu, P. Gargarella, S. Scudino
Microstructure and mechanical properties of novel high-entropy alloy particle reinforced aluminum matrix composites fabricated by selective laser melting
Journal of Alloys and Compounds 868, 159197/1-5 (2021) URL

P. Wang, Y. Lei, J. Qi, S. Yu, R. Setchi, M. Wu, J. Eckert, H. Li, S. Scudino
Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5 Mg-1Si Alloy Manufactured by Selective Laser Melting
Materials 14, 7048/1-11 (2021) URL

T. Lu, T. He, P. Zhao, K. Sun, A.F. Andreoli, H. Chen, W. Chen, Z. Fu, S. Scudino
Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl_0.25Mn_0.25 high-entropy alloy through cold rolling and annealing treatment
Journal of Materials Processing Technology 289, 116945/1-11 (2021) URL

P. Wang, F.-H. Chen, J. Eckert, S. Pilz, S. Scudino, K.G. Prashanth
Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
Journal of Central South University 28, 1068-1077 (2021) URL

K. Kosiba, K.G. Prashanth, S. Scudino
Phase Formation, Microstructure and Mechanical Properties of Mg₆₇Ag₃₃ as Potential Biomaterial
Metals 11, 461/1-10 (2021) URL

B. Li, S. Scudino, B. Gludovatz, J. Kruzic
Role of pre-existing shear band morphology in controlling the fracture behavior of a Zr–Ti–Cu–Ni–Al bulk metallic glass
Materials Science and Engineering A 786, 139396/1-11 (2020) URL

P. Wang, A. Gebert, L. Yan, H. Li, C. Lao, Z. Chen, K. Kosiba, U. Kühn, S. Scudino
Corrosion of Al-3.5Cu-1.5 Mg–1Si alloy prepared by selective laser melting and heat treatment
Intermetallics 124, 106871/1-6 (2020) URL

P. Wang, J. Eckert, K. Prashanth, M. Wu, I. Kaban, L. Xi, S. Scudino
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Transactions of Nonferrous Metals Society of China 30, 2001-2034 (2020) URL

D. Shin, C.H. Lee, U. Kühn, S.C. Lee, S.J. Park, H. Schwab, S. Scudino, K. Kosiba
Optimizing Laser Powder Bed Fusion of Ti-5Al-5V-5Mo-3Cr by Artificial Intelligence
Journal of Alloys and Compounds 158018/1-9 (2020) URL

J. Wang, C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology 36, 18-26 (2020) URL

K. Kosiba, L. Deng, S. Scudino
Viscous Flow of Supercooled Liquid in a Zr-Based Bulk Metallic Glass Synthesized by Additive Manufacturing
Materials 13, 3803/1-10 (2020) URL

Z. Wang, S. Scudino, J. Eckert, K.G. Prashanth
Selective laser melting of nanostructured Al-Y-Ni-Co alloy
Manufacturing Letters 25, 21-25 (2020) URL

R. Ali, M. Akhtar, A. Zahoor, F. Ali, S. Scudino, R. Shahid, N. Tariq, V. Srivastava, V. Uhlenwinkel, B. Hasan, J. Eckert
Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals
Materials Chemistry and Physics 251, 123071/1-6 (2020) URL

K. Kosiba, S. Scudino, J. Bednarčík, J.J. Bian, L. Gang, U. Kühn, S. Pauly
Guiding shear bands in bulk metallic glasses using stress fields: A perspective from the activation of flow units
Physical Review B 102, 134113/1-8 (2020) URL

T. He, T. Lu, N. Ciftci, H. Tan, V. Uhlenwinkel, K. Nielsch, S. Scudino
Mechanical properties and tribological behavior of aluminum matrix composites reinforced with Fe-based metallic glass particles: Influence of particle size
Powder Technology 361, 512-519 (2020) URL

T. He, S. Chen, T. Lu, P. Zhao, W. Chen, S. Scudino
High-strength and ductile ultrafine-grained Al–Y–Ni–Co alloy for high-temperature applications
Journal of Alloys and Compounds 848, 156655/1-7 (2020) URL

T. Lu, T. He, W. Chen, H. Chen, Y. Liu, B. Wan, Z. Fu, S. Scudino
Effect of solution time on the microstructure, precipitation behavior and mechanical properties of (Co_0.5NiFeCrTi_0.5 + SiC)_p/7075Al hybrid composite
Materials Characterization 170, 110702/1-12 (2020) URL

D. Şopu, S. Scudino, X.L. Bian, C. Gammer, J Eckert
Atomic-scale origin of shear band multiplication in heterogeneous metallic glasses
Scripta Materialia 178, 57-61 (2020) URL

T. He, T. Lu, N. Ciftci, V. Uhlenwinkel, W. Chen, K. Nielsch, S. Scudino
Interfacial characteristics and mechanical asymmetry in Al2024 matrix composites containing Fe-based metallic glass particles
Materials Science and Engineering A 793, 139971 (2020) URL

Y. Jia, L. Zhang, P. Ma, S. Scudino, G. Wang, J. Yi, J. Eckert, K. Prashanth
Thermal expansion behavior of Al–χSi alloys fabricated using selective laser melting
Progress in Additive Manufacturing 5, 247–257 (2020) URL

H. Li, F. Cao, P. Wang, S. Guo, W. Sun, Y. Jia, S. Scudino, Q. Chen, Z. Yu, J. Sun
The Application of Canned Deformation to a Hard-Deformed Spray-Deposited Al-Zn-Mg-Cu Alloy
Journal of Materials Engineering and Performance 28, 3531-3538 (2019) URL

S.A. Rounaghi, D.E.P. Vanpoucke, E. Esmaeili, S. Scudino, Eckert J.
Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
Journal of Alloys and Compounds 778, 327-336 (2019) URL

O.O. Salman, C. Gammer, A.K. Chaubey, J. Eckert, S. Scudino
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Materials Science and Engineering A 748, 205-212 (2019) URL

O. Salman, C. Gammer, J. Eckert, M. Salih, E. Abdulsalam, K. Prashanth, S. Scudino
Selective laser melting of 316L stainless steel: Influence of TiB₂ addition on microstructure and mechanical properties
Materials Today Communications 21, 100615/1-7 (2019) URL

S. Scudino, R.N. Shahid, J.H. Han, J. Wright
Local elasticity and macroscopic plasticity in homogeneous and heterogeneous bulk metallic glasses
Applied Physics Letters 115, 141901/2-6 (2019) URL

T. Lu, W. Chen, B. Li, M. Mao, Z. Li, Y. Liu, S. Scudino
Influence mechanisms of Zr and Fe particle additions on the microstructure and mechanical behavior of squeeze-cast 7075Al hybrid composites
Journal of Alloys and Compounds 798, 587-596 (2019) URL

O. Ertugrul, T. He, R. Shahid, S. Scudino
Effect of heat treatment on microstructure and mechanical properties of Al 2024 matrix composites reinforced with Ni₆₀Nb₄₀ metallic glass particles
Journal of Alloys and Compounds 808, 151732/ (2019) URL

K. Prashanth, S. Scudino
Quasicrystalline Composites by Additive Manufacturing
Key Engineering Materials 818, 72-76 (2019) URL

Z. Wang, K.G. Prashanth, W.W. Zhang, S. Scudino, J. Eckert
Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
Powder Technology 343, 733-737 (2019) URL

Ö. Balci, K.G. Prashanth, S. Scudino, M. Somer, J. Eckert
Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
Particulate Science and Technology 37, 286-291 (2019) URL

H. Li, P. Wang, Y. Jia, Z. Yu, Q. Chen, S. Scudino
Heat Treatable Al‐Zn‐Mg‐Cu Matrix Composites Reinforced With Ni‐Based Metallic Glass Powder
Advanced Engineering Materials 21, 1900021 /1-8 (2019) URL

S.A. Rounaghi, H. Eshghi, S. Scudino, E. Esmaeili, A.-R. Kiani-Rashid, J. Eckert
Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride–carbon nanotube nanocomposites
Physical Chemistry Chemical Physics 21, 22121-22131 (2019) URL

T. He, O. Ertugrul, N. Ciftci, V. Uhlenwinkel, K. Nielsch, S. Scudino
Effect of particle size ratio on microstructure and mechanical properties of aluminum matrix composites reinforced with Zr48Cu36Ag8Al8 metallic glass particles
Materials Science and Engineering A 742, 517-525 (2019) URL

L. Xi, P. Wang, K.G. Prashant, H. Li, H.V. Prykhodko, S. Scudino, I. Kaban
Effect of TiB₂ particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
Journal of Alloys and Compounds 786, 551-556 (2019) URL

T. Lu, W. Chen, Z. Li, T. He, B. Li, R. Li, Z. Fu, S. Scudino
Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles
Journal of Alloys and Compounds 801, 473-477 (2019) URL

W. Chen, Z. Li, T. Lu, T. He, R. Li, B. Li, B. Wan, Z. Fu, S. Scudino
Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles
Materials Science and Engineering A 762, 138116/ (2019) URL

S. Scudino
Mechanism of shear banding during cold rolling of a bulk metallic glass
Journal of Alloys and Compounds 773, 883-889 (2019) URL

O.O. Salman, F. Brenne, T. Niendorf, J. Eckert, K. Prashanth, T. He, S. Scudino
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Journal of Manufacturing Processes 45, 255–261 (2019) URL

K. Kosiba, D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
Modulating heterogeneity and plasticity in bulkmetallic glasses: Role of interfaces on shear banding
International Journal of Plasticity 119, 156-170 (2019) URL

S. Niyomsoan, D. Leiva, R. Silva, L. Chanchetti, R.N. Shahid, S. Scudino, P. Gargarella, W. Botta
Effects of graphite addition and air exposure on ball-milled Mg–Al alloys for hydrogen storage
International Journal of Hydrogen Energy 44, 23257-23266 (2019) URL

P. Wang, C. Gammer, F. Brenne, T. Niendorf, J. Eckert, S. Scudino
A heat treatable TiB₂/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
Composites Part B: Engineering 147, 162-168 (2018) URL

T. Lu, S. Scudino, W. Chen, P. Wang, D. Li, M. Mao, L. Kang, Y. Liu, Z. Fu
The influence of nanocrystalline CoNiFeAl_0.4Ti_0.6Cr_0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiC_p/7075Al composites
Materials Science and Engineering A 726, 126-136 (2018) URL

R.N. Shahid, S. Scudino
Strengthening of Al-Fe₃Al composites by the generation of harmonic structures
Scientific Reports 8, 6484/1-12 (2018) URL

S. Scudino, D. Sopu
Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
Nano Letters 18, 1221-1227 (2018) URL

Z. Wang, K.G. Prashanth, K.B. Surreddi, C. Suryanarayana, J. Eckert, S. Scudino
Pressure-assisted sintering of Al–Gd–Ni–Co amorphous alloy powders
Materialia 2, 157-166 (2018) URL

P. Wang, L. Deng, K.G. Prashant, S. Pauly, J. Eckert, S. Scudino
Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
Journal of Alloys and Compounds 735, 2263-2266 (2018) URL

R.N. Shahid, S. Scudino
Microstructure and Mechanical Behavior of Al-Mg Composites Synthesized by Reactive Sintering
Metals 8, 762/1-14 (2018) URL

S. Scudino, J.J. Bian, H. Shakur Shahabi, D. Sopu, J. Sort, J. Eckert, G. Liu
Ductile bulk metallic glass by controlling structural heterogeneities
Scientific Reports 8, 9174/1-7 (2018) URL

O.O. Salman, A. Funk, A. Waske, J. Eckert, S. Scudino
Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO₂ Particles: Process Optimization by Adjusting the Laser Scanning Speed
Technologies 6, 25/1-10 (2018) URL

P. Wang, C. Gammer, F. Brenne, K. Gokuldoss Prahanth, R. Mendes, M. Rümmeli, T. Gemming, J. Eckert, S. Scudino, S. Scudino
Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Materials Science and Engineering A 711, 562-570 (2018) URL

S.-Y. Kim, G.-Y. Lee, G.-H. Park, H.-A. Kim, A.-Y. Lee, S. Scudino, K.G. Prashanth, D.-H. Kim, J. Eckert, M.-H. Lee
High strength nanostructured Albased alloys through optimized processing of rapidly quenched amorphous precursors
Scientific Reports 8, 1090/1-12 (2018) URL

R.N. Shahid, S. Scudino
Microstructural strengthening by phase transformation in Al-Fe₃Al composites
Journal of Alloys and Compounds 705, 590-597 (2017) URL

Y.D. Jia, P. Ma, K.G. Prashanth, G. Wang, J. Yi, S. Scudino, F.Y. Cao, J.F. Sun, J. Eckert
Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
Journal of Alloys and Compounds 699, 548-553 (2017) URL

P. Ramasamy, R.N. Shahid, S. Scudino, J. Eckert, M. Stoica
Influencing the crystallization of Fe₈₀Nb₁₀B₁₀ metallic glass by ball milling
Journal of Alloys and Compounds 725, 227-236 (2017) URL

S. Scudino, R.N. Shahid, B. Escher, M. Stoica, B.S. Li, J.J. Kruzic
Mapping the cyclic plastic zone to elucidate the mechanisms of crack tip deformation in bulk metallic glasses
Applied Physics Letters 110, 081903/1-4 (2017) URL

P. Wang, H.C. Li, K.G. Prashanth, J. Eckert, S. Scudino
Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
Journal of Alloys and Compounds 707, 287-290 (2017) URL

H. Li, F. Cao, S. Guo, Y. Jia, D. Zhang, Z. Liu, P. Wang, S. Scudino, J. Sun
Effects of Mg and Cu on microstructures and properties of spray-deposited Al-Zn-Mg-Cu alloys
Journal of Alloys and Compounds 719, 89-96 (2017) URL

H. Li, F. Cao, S. Guo, Z. Ning, Z. Liu, Y. Jia, S. Scudino, T. Gemming, J. Sun
Microstructures and properties evolution of spray-deposited Al-Zn-Mg-Cu-Zr alloys with scandium addition
Journal of Alloys and Compounds 691, 482-488 (2017) URL

K.G. Prashanth, S. Scudino, T. Maity, J. Das, J. Eckert
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Materials Research Letters 5, 386-390 (2017) URL

Z. Wang, S. Scudino, K.G. Prashanth, J. Eckert
Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
Journal of Alloys and Compounds 707, 63-67 (2017) URL

S.A. Rounaghi, D.E.P. Vanpoucke, H. Eshgi, S. Scudino, E. Esmaeili, S. Oswald, S. Eckert
A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics
Journal of Alloys and Compounds 729, 240-248 (2017) URL

D. Sopu, A. Stukowski, M. Stoica, S. Scudino
Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses
Physical Review Letters 119, 195503/1-5 (2017) URL

K.G. Prashanth, S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert
Additive Manufacturing: Reproducibility of Metallic Parts
Technologies 5, 5010008/1-7 (2017) URL

K.G. Prashanth, S. Scudino, J. Eckert
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Acta Materialia 126, 25-35 (2017) URL

S.A. Rounaghi, D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study
Physical Chemistry Chemical Physics 19, 12414-12424 (2017) URL

K. Kosiba, S. Scudino, R. Kobold, U. Kuehn, A.L. Greer, J. Eckert, S. Pauly
Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
Acta Materialia 127, 416-425 (2017) URL

S. Scudino, K.B. Surredddi
Shear band morphology and fracture behavior of cold-rolled Zr_52.5Ti₅Cu₁₈Ni_14.5Al₁₀ bulk metallic glass under tensile loading
Journal of Alloys and Compounds 708, 722-727 (2017) URL

Z. Wang, K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino
Reciprocating sliding wear behavior of high-strength nanocrystalline Al₈₄Ni₇Gd₆Co₃ alloys
Wear 382-383, 78-84 (2017) URL

S. Pauly, C. Schricker, S. Scudino, L. Deng, U. Kuehn
Processing a glass-forming Zr-based alloy by selective laser melting
Materials & Design 135, 133-141 (2017) URL

S. Khoramkhorshid, M. Alizadeh, A.H. Taghvaei, S. Scudino
Microstructure and mechanical properties of Al-based metal matrix composites reinforced with Al₈₄Gd₆Ni₇Co₃ glassy particles produced by accumulative roll bonding
Materials & Design 90, 137-144 (2016) URL

A.K. Chaubey, P.K. Gokuldoss, Z. Wang, S. Scudino, N.K. Mukhopadhyay, J. Eckert
Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles
Technologies 4, 4040037/1-8 (2016) URL

J. Suryawanshi, K.G. Prashanth, S. Scudino, J. Eckert, O. Prakash, U. Ramamurty
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Acta Materialia 115, 285-294 (2016) URL

Y. Jia, F. Cao, P. Ma, S. Scudino, J. Eckert, J. Sun, G. Wang
Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition
Journal of Materials Research 31, 2948-2956 (2016) URL

H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, B. Escher, S. Menzel, G.B.M. Vaughan, U. Kuehn, J. Eckert
Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction
Acta Materialia 111, 187-193 (2016) URL

Z. Wang, R.T. Qu, K.G. Prashanth, J. Eckert, S. Scudino
Compression behavior of inter-particle regions in high-strength Al₈₄Ni₇Gd₆Co₃ alloy
Materials Letters 185, 25-25 (2016) URL

K.G. Prashant, S. Scudino, J. Eckert
Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures
Technologies 4, 4040038/1-9 (2016) URL

P. Ma, Y. Jia, K.G. Prashanth, S. Scudino, Z. Yu, J. Eckert
Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
Journal of Alloys and Compounds 657, 430-435 (2016) URL

A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, J. Eckert
Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
Journal of Materials Research 31, 1229-1236 (2016) URL

S. Scudino, K.B. Surreddi, G. Wang, G. Liu
Effect of stress concentration on plastic deformation of Zr_41.2Ti_13.8Cu_12.5Ni10Be_22.5 bulk metallic glass under compressive loading
Materials Letters 179, 202-205 (2016) URL

S.A. Rounaghi, H. Eshghi, S. Scudino, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R. Kiani Rashid, M. Samadi Khoshkhoo, U. Scheler, J. Eckert
Mechanochemical route to the synthesis of nanostructured Aluminium nitride
Scientific Reports 6, 33375/1-11 (2016) URL

K.G. Prashanth, S. Scudino, A.K. Chaubey, L. Loeber, P. Wang, H. Attar, F.P. Schimansky, F. Pyczak, J. Eckert
Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
Journal of Materials Research 31, 55-65 (2016) URL

P. Ma, Z.J. Wei, Y.D. Jia, C.M. Zou, S. Scudino, K.G. Prashanth, Z.S. Yu, S.L. Yang, C.G. Li, J. Eckert
Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si
Journal of Alloys and Compounds 688 Part A, 88-93 (2016) URL

F. Cao, Y. Jia, K.G. Prashanth, P. Ma, J. Li, S. Scudino, F. Huang, J. Eckert, J. Sun
Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content
Materials & Design 74, 150-156 (2015) URL

H.Y. Jung, S.J. Choi, K.G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuehn, D.H. Kim, K.B. Kim, J. Eckert
Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study
Materials & Design 86, 703-708 (2015) URL

K.G. Prashanth, H. Shakur Shahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, S. Scudino
Production of high strength Al₈₅Nd₈Ni₅Co₂ alloy by selective laser melting
Additive Manufacturing 6, 1-5 (2015) URL

H. Attar, K.G. Prashanth, L.-C. Zhang, M. Calin, I.V. Okuloy, S. Scudino, C. Yang, J. Eckert
Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting
Journal of Materials Science & Technology 31, 1001-1005 (2015) URL

H. Attar, K.G. Prashanth, A.K. Chaubey, M. Calin, L.C. Zhang, S. Scudino, J. Eckert
Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes
Materials Letters 142, 38-41 (2015) URL

S. Scudino, C. Unterdoerfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, J. Eckert
Additive manufacturing of Cu-10Sn bronze
Materials Letters 156, 202-204 (2015) URL

H. Attar, L. Loeber, A. Funk, M. Calin, L.C. Zhang, K.G. Prashanth, S. Scudino, Y.S. Zhang, J. Eckert
Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting
Materials Science and Engineering A 625, 350-356 (2015) URL

S. Scudino, M. Stoica, I. Kaban, K.G. Prashanth, G.B.M. Vaughan, J. Eckert
Length scale-dependent structural relaxation in Zr_57.5Ti_7.5Nb₅Cu_12.5Ni₁₀Al_7.5 metallic glass
Journal of Alloys and Compounds 639, 465-469 (2015) URL

Z. Whang, R.T. Qu, S. Scudino, B.A. Sun, K.G. Prashanth, D.V. Louzguine-Luzgin, M.W. Chen, Z.F. Zhang, J. Eckert
Hybrid nanostructured aluminum alloy with super-high strength
NPG Asia Materials 7, e229/1-8 (2015) URL

Z. Wei, P. Ma, H. Wang, C. Zou, S. Scudino, K. Song, K.G. Prashanth, W. Jiang, J. Eckert
The thermal expansion behaviour of SiC_p/ Al- 20Si composites solidified under high pressures
Materials & Design 65, 387-394 (2015) URL

O. Balci, K.G. Prashanth, S. Scudino, D. Agaogullari, I. Duman, M.L. Oevecoglu, V. Uhlenwinkel, J. Eckert
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals 5, 669-685 (2015) URL

Z. Wang, S. Scudino, M. Stoica, W. Zhang, J. Eckert
Al-based matrix composites reinforced with short Fe-based metallic glassy fiber
Journal of Alloys and Compounds 651, 170-175 (2015) URL

Z. Wang, K.G. Prashanth, A.K. Chaubey, L. Loeber, F.P. Schimansky, F. Pyczak, W.W. Zhang, S. Scudino, J. Eckert
Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles
Journal of Alloys and Compounds 630, 256-259 (2015) URL

M. Samadi Khoshkhoo, S. Scudino, T. Gemming, J. Thomas, J. Freudenberger, M. Zehetbauer, C.C. Koch, J. Eckert
Nanostructure formation mechanism during in-situ consolidation of copper by room-temperature ball milling
Materials & Design 65, 1083-1090 (2015) URL

H. Shakur Shahabi, S. Scudino, I. Kaban, M. Stoica, U. Ruett, U. Kuehn, J. Eckert
Structural aspects of elasto-plastic deformation of a Zr-based bulk metallic glass under uniaxial compression
Acta Materialia 95, 30-36 (2015) URL

S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, B. Escher, U. Kuehn, G.B.M. Vaughan, J. Eckert
Structural features of plastic deformation in bulk metallic glasses
Applied Physics Letters 106, 031903/1-5 (2015) URL

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, M. Nicoara, G.B.M. Vaughan, J. Wright, R. Kumar, J. Eckert
Structure evolution of soft magnetic (Fe₃₆Co₃₆B_19.2Si_4.8Nb₄)100-_xCu_x (x=0 and 0.5) bulk glassy alloys
Acta Materialia 95, 335-342 (2015) URL

B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert, J.J. Kruzic
Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass
Materials Science and Engineering A 646, 242-248 (2015) URL

A.K. Chaubey, S. Scudino, K.G. Prashanth, J. Eckert
Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium
Materials Science and Engineering A 625, 46-49 (2015) URL

K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Loeber, Z. Wang, A.K. Chaubey, U. Kuehn, J. Eckert
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
Materials Science and Engineering A 590, 153-160 (2014) URL

D. Marko, K.G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert
Al-based metal matrix composites reinforced with Fe_49.9Co_35.1Nb_7.7B_4.5Si_2.8 glassy powder: Mechanical behavior under tensile loading
Journal of Alloys and Compounds 615, S382-S385 (2014) URL

K.G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert
Friction welding of Al-12Si parts produced by selective laser melting
Materials & Design 57, 632-637 (2014) URL

H. Attar, M. Boenisch, M. Calin, L.-C. Zhang, S. Scudino, J. Eckert
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
Acta Materialia 76, 13-22 (2014) URL

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction
Journal of Applied Physics 115, 053520/1-9 (2014) URL

H. Attar, M. Boenisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert
Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies
Journal of Materials Research 29, 1941-1950 (2014) URL

F. Ali, S. Scudino, M.S. Anwar, R.N. Shahid, V.C. Srivastava, V. Uhlenwinkel, M. Stoica, G. Vaughan, J. Eckert
Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction
Journal of Alloys and Compounds 607, 274-279 (2014) URL

Z. Wang, K.G. Prashanth, S. Scudino, J. He, W.W. Zhang, Y.Y. Li, M. Stoica, G. Vaughan, D.J. Sordelet, J. Eckert
Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders
Intermetallics 46, 97-102 (2014) URL

Y. Jia, F. Cao, S. Scudino, P. Ma, H. Li, L. Yu, J. Eckert, J. Sun
Microstructure and thermal expansion behavior of spray-deposited Al-50Si
Materials & Design 57, 585-591 (2014) URL

H. Attar, M. Calin, L.C. Zhang, S. Scudino, J. Eckert
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Materials Science and Engineering A 593, 170-177 (2014) URL

Z. Wang, J. Tan, S. Scudino, B.A. Sun, R.T. Qu, J. He, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert
Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses
Advanced Powder Technology 25, 635-639 (2014) URL

P. Donnadieu, C. Pohlmann, S. Scudino, J.-J. Blandin, K.B. Surreddi, J. Eckert
Deformation at ambient and high temperature of in situ Laves phases-ferrite composites
Science and Technology of Advanced Materials 15, 034801/1-8 (2014) URL

P. Ma, K.G. Prashanth, S. Scudino, Y. Jia, H. Wang, C. Zou, Z. Wei, J. Eckert
Influence of annealing on mechanical properties of Al- 20Si processed by selective laser melting
metals 4, 28-36 (2014) URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert
Inverse Hall-Petch like mechanical behaviour in nanophase AlCuFe quasicrystals: A new phenomenon
Acta Physica Polonica A 126, 543-548 (2014) URL

K. Zhuravleva, M. Boenisch, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert
Phase transformations in ball-milled Ti-40Nb and Ti-45Nb powders upon quenching from the beta--phase region
Powder Technology 253, 166-171 (2014) URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
High-strength ultrafine grain Mg- 7.4% Al alloy synthesized by consolidation of mechanically alloyed powders
Journal of Alloys and Compounds 610, 456-461 (2014) URL

S.M. Khoshkhoo, S. Scudino, J. Bednarcik, A. Kauffmann, H. Bahmanpour, J. Freudenberger, R. Scattergood, M.J. Zehetbauer, C.C. Koch, J. Eckert
Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis
Journal of Alloys and Compounds 588, 138-143 (2014) URL

K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kuehn, M. Kamaraj, S. Scudino, J. Eckert
Tribological and corrosion properties of Al-12Si produced by selective laser melting
Journal of Materials Research 29, 2044-2054 (2014) URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, B.G. Fu, Z.J. Wei, U. Kuehn, J. Eckert
Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al–20Si alloy
Journal of Alloys and Compounds 586, 639-644 (2014) URL

H. Shakur Shahabi, S. Scudino, U. Kuehn, J. Eckert
Metallic glass-steel composite with improved compressive plasticity
Materials & Design 59, 241-245 (2014) URL

Z. Wang, K.G. Prashanth, S. Scudino, A.K. Chaubey, D.J. Sordelet, W.W. Zhang, Y.Y. Li, J. Eckert
Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles
Journal of Alloys and Compounds 586, S419-S422 (2014) URL

Z. Wang, J. Tan, B.A. Sun, S. Scudino, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert
Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg₆₅Cu₂₀Zn₅Y₁₀ metallic glass particles
Materials Science and Engineering A 600, 53-58 (2014) URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch
Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system
Journal of Alloys and Compounds 578, 471-480 (2013) URL

D. Lahiri, P.K. Gill, S. Scudino, C. Zhang, V. Singh, J. Karthikeyan, N. Munroe, S. Seal, A. Agarwal
Cold sprayed aluminum based glassy coating: Synthesis, wear and corrosion properties
Surface and Coatings Technology 232, 33-40 (2013) URL

K. Zhuravleva, S. Scudino, M.S. Khoshkhoo, A. Gebert, M. Calin, L. Schultz, J. Eckert
Mechanical alloying of β- Type Ti-Nb for biomedical applications
Advanced Engineering Materials 15, 262-268 (2013) URL

N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert
Grain size softening effect in Al_62.5Cu₂₅Fe_12.5 nanoquasicrystals
Applied Physics Letters 103, 201914/1-5 (2013) URL

J.D. Moore, D. Klemm, D. Lindackers, S. Grasemann, R. Traeger, J. Eckert, L. Loeber, S. Scudino, M. Katter, A. Barcza, K.P. Skokov, O. Gutfleisch
Selective laser melting of La(Fe,Co,Si)₁₃ geometries for magnetic refrigeration
Journal of Applied Physics 114, 043907/1-8 (2013) URL

S. Scudino, J.Y. Kim, K.G. Prashanth, M.H. Lee, B.S. Kim, U. Kuehn, J. Eckert
Production of customized hybrid porous structures by powder metallurgy of Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ glassy powders
Journal of Materials Research 28, 2490-2498 (2013) URL

P. Ma, C.M. Zou, H.W. Wang, S. Scudino, K.K. Song, M. Samadi Khoshkhoo, Z.J. Wei, U. Kuehn, J. Eckert
Structure of GP zones in Al-Si matrix composites solidified under high pressure
Materials Letters 109, 1-4 (2013) URL

A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
Synthesis and characterization of nanocrystallineMg-7.4%Al powders produced by mechanical alloying
Metals 3, 58-68 (2013) URL

K. Zhuravleva, A. Chivu, A. Teresiak, S. Scudino, M. Calin, L. Schultz, J. Eckert, A. Gebert
Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications
Materials Science and Engineering C 33, 2280-2287 (2013) URL

F. Ali, S. Scudino, S.M. Gorantla, V.C. Srivastava, H.R. Shahid, V. Uhlenwinkel, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, J. Eckert
Mechanically driven phase transformation in single phase Al_62.5Cu₂₅Fe_12.5 quasi-crystals: Effect of milling intensity
Acta Materialia 61, 3819-3830 (2013) URL

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, T. Gemming, H. Wendrock, J. Eckert
Size evaluation of nanostructured materials
Materials Letters 108, 343-345 (2013) URL

S. Pauly, L. Loeber, R. Petters, M. Stoica, S. Scudino, U. Kuehn, J. Eckert
Processing metallic glasses by selective laser melting
Materials Today 16, 37-41 (2013) URL

K. Zhuravleva, M. Boenisch, K.G. Prashanth, U. Hempel, A. Helth, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert
Production of porous beta-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing
Materials 6, 5700-5712 (2013) URL

Z. Yan, W. Hao, Y. Hu, K. Song, M. Stoica, S. Scudino, J. Eckert
Evidence for viscous flow nature in Zr₆₀Al₁₅Ni₂₅ metallic glass subjected to cold rolling
Applied Physics Letters 103, 021907/1-5 (2013) URL

S.A. Rounaghi, H. Eshghi, A.R. Kiani Rashid, J. Vahdati Khaki, M. Samadi Khoshkhoo, S. Scudino, J. Eckert
Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile
Journal of Solid State Chemistry 198, 542-547 (2013) URL

J.Y. Kim, S. Scudino, U. Kuehn, B.S. Kim, M.H. Lee, J. Eckert
Production and characterization of brass-matrix composites reinforced with Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ glassy particles
metals 2, 79-94 (2012) URL

K.G. Prashanth, S. Scudino, M. Samadi Khoshkhoo, K.B. Surreddi, M. Stoica, G. Vaughan, J. Eckert
Structural and mechanical characterization of Zr_58.5Ti_8.2Cu_14.2N_i11.4Al_7.7 bulk metallic glass
Materials 5, 1-11 (2012) URL

D. Beitelschmidt, S. Scudino, G. K. Prashanth, U. Kuehn, J. Eckert
Mechanical behavior of the cold-rolled Zr₅₇Ti₈Nb_2.5Cu_13.9Ni_11.1Al_7.5 metallic glass-quasicrystalline composite
International Journal of Materials Research 103, 1113-1116 (2012) URL

F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert
Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites
Journal of Alloys and Compounds 536, S130-S133 (2012) URL

M. Calin, M. Stoica, N. Zheng, X. Wang, S. Scudino, A. Gebert, J. Eckert
Thermal stability and crystallization kinetics of Ti40Zr10Cu34Pd14Sn2 bulk metallic glass
Solid State Phenomena 188, 3-10

A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert
Phase transitions in Al₃Ca₈ and Al₁₄Ca₁₃ intermetallic compounds induced by milling and annealing
Materials Letters 79, 145-147 (2012) URL

I. Cernickova, L. Roscak, F. Ali, M. Kusy, S. Scudino, R. Cicka, M. Drienovsky, P. Priputen, J. Janovec
Influence of technological parameters on evolution of phases in Al-CMA composites prepared by powder metallurgy
Kovove Materialy - Metallic Materials 50, 327-334

A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra, J. Eckert
Effect of particle dispersion on the mechanical behavior of Al-based metal matrix composites reinforced with nanocrystalline Al–Ca intermetallics
Journal of Alloys and Compounds 536, S134-S137 (2012) URL

M. Samadi Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert
Grain and crystallite size evaluation of cryomilled pure copper
Journal of Alloys and Compounds 509, S343-S347 (2011) URL

K.G. Prashanth, S. Kumar, S. Scudino, B.S. Murty, J. Eckert
Fabrication and response of Al₇₀Y₁₆Ni₁₀Co₄ glass reinforced metal matrix composites
Materials and Manufacturing Processes 26, 1242-1247 (2011) URL

K.K. Song, S. Pauly, Y. Zhang, S. Scudino, P. Gargarella, K.B. Surreddi, U. Kuehn, J. Eckert
Significant tensile ductility induced by cold rolling in Cu_47.5Zr_47.5Al₅ bulk metallic glass
Intermetallics 19, 1394-1398 (2011) URL

N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, T.P. Yadav, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert
Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling
Philosophical Magazine 91, 2482-2490 (2011) URL

S. Scudino, B. Jerliu, K.B. Surreddi, U. Kuehn, J. Eckert
Effect of cold rolling on compressive and tensile mechanical properties of Zr_52.5Ti₅Cu₁₈Ni_14.5Al₁₀ bulk metallic glass
Journal of Alloys and Compounds 509, S128-S130 (2011) URL

S. Scudino, B. Jerliu, S. Pauly, K.B. Surreddi, U. Kuehn, J. Eckert
Ductile bulk metallic glasses produced through designed heterogeneities
Scripta Materialia 65, 815-818 (2011) URL

G. Liu, S. Scudino, R. Li, U. Kuehn, J. Sun, J. Eckert
Coupling effect of primary voids and secondary voids on the ductile fracture of heat-treatable aluminum alloys
Mechanics of Materials 43, 556-566 (2011) URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, F. Alia, J. Eckert
Structure and mechanical properties of Al–Mg alloys produced by copper mold casting
Journal of Alloys and Compounds 504, S483-S486 (2010) URL

S. Scudino, K.B. Surreddi, M.S. Khoshkhoo, M. Sakaliyska, G. Wang, J. Eckert
Improved room temperature plasticity of Zr_41.2Ti1_3.8Cu_12.5Ni10Be_22.5 bulk metallic glass by channel-die compression
Advanced Engineering Materials 12, 1123-1126 (2010) URL

S. Scudino, K.B. Surreddi, G. Wang, J. Eckert
Enhanced plastic deformation of Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass by the optimization of frictional boundary restraints
Scripta Materialia 62, 750-753 (2010) URL

S. Scudino, F. Ali, K.B. Surreddi, K.G. Prashanth, M. Sakaliyska, J. Eckert
Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles
Journal of Physics: Conference Series 240, 012154/1-4 (2010) URL

K.B. Surreddi, S. Scudino, M. Sakaliyska, K.G. Prashanth, D.J. Sordelet, J. Eckert
Crystallization behavior and consolidation of gas-atomized Al₈₄Gd₆Ni₇Co₃ glassy powder
Journal of Alloys and Compounds 491, 137-142 (2010) URL

S. Scudino, K.B. Surreddi, J. Eckert
Mechanical properties of cold-rolled Zr₆₀Ti₅Ag₅Cu_12.5Ni₁₀Al_7.5 metallic glass
Physica Status Solidi A 207, 1118-1121 (2010) URL

K.B. Surreddi, V.C. Srivastava, S. Scudino, M. Sakaliyska, V. Uhlenwinkel, J.S. Kim, J. Eckert
Production of high-strength Al₈₅Y₈Ni₅Co₂ bulk alloy by spark plasma sintering
Journal of Physics: Conference Series 240, 012155/1-4 (2010) URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, J. Eckert, A. Rosenauer, H.-W. Zoch
Microstructure and mechanical properties of partially amorphous Al₈₅Y₈Ni₅Co₂ plate produced by spray forming
Materials Science and Engineering A 527, 2747-2758 (2010) URL

S. Scudino, B. Bartusch, J. Eckert
Viscosity of the supercooled liquid in multi-component Zr-based metallic glasses
Journal of Physics: Conference Series 144, 012097/1-4 (2009) URL

K.G. Prashanth, S. Scudino, B.S. Murty, J. Eckert
Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders
Journal of Alloys and Compounds 477, 171-177 (2009) URL

V.C. Srivastava, K.B. Surreddi, S. Scudino, M. Schowalter, V. Uhlenwinkel, A. Schulz, A. Rosenauer, H.-W. Zoch, J. Eckert
Spray forming of bulk Al₈₅Y₈Ni₅Co₂ with co-existing amorphous, nano- and micro-crystalline structures
Transactions of The Indian Institute of Metals 62, 331-335 (2009) URL

K.B. Surreddi, S. Scudino, H.V. Nguyen, K. Nikolowski, M. Stoica, M. Sakaliyska, J.S. Kim, T. Gemming, J. Vierke, M. Wollgarten, J. Eckert
Spark plasma sintering of gas atomized Al₈₇Ni₈La₅ amorphous powder
Journal of Physics: Conference Series 144, 012079/1-5 (2009) URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert
Mechanical alloying and milling of Al-Mg alloys
Journal of Alloys and Compounds 483, 2-7 (2009) URL

S. Scudino, K.B. Surreddi, H.V. Nguyen, G. Liu, T. Gemming, M. Sakaliyska, J.S. Kim, J. Vierke, M. Wollgarten, J. Eckert
High-strength Al₈₇Ni₈La₅ bulk alloy produced by spark plasma sintering of gas atomized powders
Journal of Materials Research 24, 2909-2916 (2009) URL

S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty, J. Eckert
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy
Acta Materialia 57, 2029-2039 (2009) URL

K.G. Prashanth, S. Scudino, K.B. Surreddi, M. Sakaliyska, B.S. Murty, J. Eckert
Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots
Materials Science and Engineering A 513-514, 279-285 (2009) URL

K. Nikolowski, S. Scudino, M. Stoica, K.B. Surreddi, J. Das, J. Eckert
Stress-induced martensitic transformation in a Ti₄₅Zr₃₈Al₁₇ cast rod
Journal of Physics: Conference Series 144, 012090/1-4 (2009) URL

S. Scudino, P. Donnadieu, K.B. Surreddi, K. Nikolowski, M. Stoica, J. Eckert
Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys
Intermetallics 17, 532-539 (2009) URL

S. Scudino, S. Venkataraman, M. Stoica, K.B. Surreddi, S. Pauly, J. Das, J. Eckert
Consolidation and mechanical properties of ball milled Zr₅₀Cu₅₀ glassy ribbons
Journal of Alloys and Compounds 483, 227-230 (2009) URL

G.J. Zhang, R.H. Wang, S.P. Yuan, G. Liu, S. Scudino, J. Sun, K.H. Chen
Influence of constituents on the ductile fracture of Al–Cu–Mg alloys: Modulated by the aging treatment
Materials Science and Engineering A 526, 171-176 (2009) URL

S. Scudino, M. Sakaliyska, K.B. Surreddi, J. Eckert
Solid-state processing of Al-Mg alloys
Journal of Physics: Conference Series 144, 012019/1-4 (2009) URL

S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi, J. Eckert
Powder metallurgy of Al-based metal matrix composites reinforced with beta - Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties
Acta Materialia 57, 4529-4538 (2009) URL

S. Scudino, S. Venkataraman, J. Eckert
Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass
Journal of Alloys and Compounds 460, 263-267 (2008) URL

S. Scudino, K.B. Surreddi, S. Sager, M. Sakaliyska, J.S. Kim, W. Loeser, J. Eckert
Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites
Journal of Materials Science 43, 4518-4526 (2008) URL

J. Eckert, M. Calin, P. Yu, L.C. Zhang, S. Scudino, C. Duhamel
Al-based alloys containing amorphous and nanostructured phases
Reviews on Advanced Materials Science 18, 169-172 (2008) URL

S. Scudino, S. Venkataraman, M. Sakaliyska, J. Eckert
Crystallization behavior and consolidation of ball milled Zr₆₀Ti₅Ag₅Cu_12.5Ni₁₀Al_7.5 glassy powders
Journal of Alloys and Compounds 456, 159-162 (2008) URL

S. Scudino, S. Sperling, M. Sakaliyska, C. Thomas, M. Feuerbacher, K.B. Kim, H. Ehrenberg, J. Eckert
Phase transformations in mechanically milled and annealed single-phase beta-Al₃Mg₂
Acta Materialia 56, 1136-1143 (2008) URL

S. Scudino, D.J. Sordelet, J. Eckert
Devitrification of mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders studied by time-resolved X-ray diffraction
Reviews on Advanced Materials Science 18, 221-224 (2008) URL

S. Scudino, M. Sakaliyska, M. Stoica, K.B. Surreddi, F. Ali, G. Vaughan, A.R. Yavari, J. Eckert
In-situ X-ray diffraction of mechanically milled - beta-Al₃Mg₂ powders
Physica Status Solidi-Rapid Research Letters 2, 272-274 (2008) URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Effect of Zr on the crystallization behavior of multi-component Zr-based metallic glasses
Journal of Alloys and Compounds 434-435, 217-220 (2007) URL

S. Scudino, J. Eckert, X.Y. Yang, D.J. Sordelet, L. Schultz
Conditions for quasicrystal formation from mechanically alloyed Zr-based glassy powders
Intermetallics 15, 571-582 (2007) URL

S. Venkataraman, B. Bartusch, C. Mickel, K.B. Kim, J. Das, S. Scudino, M. Stoica, D.J. Sordelet, J. Eckert
Metallic glass formation in the Cu47Ti33Zr11Ni8Si1 alloy
Materials Science and Engineering A 444, 257-264 (2007) URL

N. Van Steenberge, J. Sort, A. Concustell, J. Das, S. Scudino, S. Surinach, J. Eckert, M.D. Baro
Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy
Scripta Materialia 56, 605-608 (2007) URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Influence of oxygen on the devitrification of Zr–Ti–Nb–Cu–Ni–Al metallic glasses
Materials Science and Engineering A 449-451, 493-496 (2007) URL

S. Venkataraman, S. Scudino, J. Eckert, T. Gemming, C. Mickel, L. Schultz, D.J. Sordelet
Nanocrystallization of gas atomized Cu47Ti33Zr11Ni8Si1 metallic glass
Journal of Materials Research 21, 597-607 (2006) URL

S. Scudino, M. Stoica, N. Mattern, H. Breitzke, K. Lueders, A.R. Yavari, J. Eckert
Is a particular quenched-in short-range order necessary for quasicrystal formation from glassy precursors?
Physica Status Solidi B-Basic Solid State Physics 243, R34-R36 (2006) URL

S. Venkataraman, M. Stoica, S. Scudino, T. Gemming, C. Mickel, U. Kunz, K.B. Kim, L. Schultz, J. Eckert
Revisiting the Cu47Ti33Zr11Ni8Si1 glass-forming alloy
Scripta Materialia 54, 835-840 (2006) URL

S. Scudino, J. Das, M. Stoica, K.B. Kim, M. Kusy, J. Eckert
High strength hexagonal structured dendritic phase reinforced Zr–Ti–Ni bulk alloy with enhanced ductility
Applied Physics Letters 88, 201920/1-3 (2006) URL

S. Scudino, J. Eckert, H. Breitzke, K. Lueders, L. Schultz
Influence of ball milling on quasicrystal formation in melt-spun Zr-based glassy ribbons
Philosophical Magazine 86, 367-371 (2006) URL

S. Scudino, J. Eckert, C. Mickel, L. Schultz
On the amorphous-to-quasicrystalline phase transformation in ball-milled and melt-spun Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 glassy alloys
Journal of Non-Crystalline Solids 351, 856-862 (2005) URL

U. Kuehn, J. Eckert, S. Scudino, A. Gebert, N. Radtke, N. Mattern, L. Schultz
Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al alloys by casting or annealing
Journal of Metastable and Nanocrystalline Materials 24-25, 511-514

S. Scudino, J. Eckert, C. Mickel, P. Schubert-Bischoff, H. Breitzke, K. Lueders, L. Schultz
Quasicrystalline phase formation in Zr–Ti–Nb–Cu–Ni–(Al) metallic glasses
Journal of Alloys and Compounds 387, 269-273 (2005) URL

S. Scudino, U. Kuehn, L. Schultz, H. Breitzke, K. Lueders, J. Eckert
Formation of quasicrystals in ball-milled amorphous Zr-Ti-Nb-Cu-Ni-Al alloys with different Nb content
Journal of Materials Science 39, 5483-5486

S. Scudino, J. Eckert, L. Schultz
Possible influence of quenched-in nuclei on quasicrystal formation in mechanically alloyed Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 glassy powder
Journal of Materials Research 19, 2211-2215

S. Scudino, C. Mickel, L. Schultz, J. Eckert, X.Y. Yang, D.J. Sordelet
Quasicrystal formation in mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders
Applied Physics Letters 85, 4349-4351 (2004) URL

U. Kamachi Mudali, S. Scudino, U. Kuehn, J. Eckert, A. Gebert
Polarisation behaviour of the Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 alloy in different microstructural states in acid solutions
Scripta Materialia 50, 1379-1384 (2004) URL

H. Breitzke, K. Lueders, S. Scudino, U. Kuehn, J. Eckert
NMR investigations of medium-range order and quasicrystal formation in Zr59Cu20Al10Ni8Ti3 metallic glass.lf.
Physical Review B 70, 014201/1-12 (2004) URL

S. Scudino, U. Kuehn, L. Schultz, D. Nagahama, K. Hono, J. Eckert
Microstructure evolution upon devitrification and crystallization kinetics of Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 melt-spun glassy ribbon
Journal of Applied Physics 95, 3397-3404 (2004) URL

S. Scudino, J. Eckert, U. Kuehn, L. Schultz
Formation of quasicrystals in Zr-Ti-Nb-Cu-Ni-Al melt-spun and ball-milled multicomponent alloys
Journal of Metastable and Nanocrystalline Materials 15-16, 67-72

S. Scudino, J. Eckert, U. Kuehn, L. Schultz
Formation of quasicrystals by partial devitrification of ball-milled amorphous Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5
Applied Physics Letters 83, 2345-2347 (2003) URL

Beiträge in Konferenzberichten/Tagungsbänden

S. Scudino, Cambridge: Woodhead Publishing Edited by:Rahul Mitra
6 - Powder metallurgy of Al-based matrix composites reinforced with quasicrystalline particles: processing and mechanical properties
Intermetallic Matrix Composites Intermetallic Matrix Composites: Properties and Applications, 147-163, (2018), URL

X. Wang, S. Scudino, J. Eckert
Production and characterization of Al 2024 matrix composites reinforced with beta-Al3Mg2 complex metallic alloy particles
Materials Research Society Symposium Proceedings MRS Proceedings Materials Research Society Symposium, 1517, 1-11, (2013)

K.G. Prashanth, K.B. Surreddi, S. Scudino, M. Samadi Khoshkhoo, Z. Wang, D.J. Sordelet, J. Eckert
Powder metallurgy of high strength Al90.4 Y4.4 Ni4.3 Co0.9 gas-atomized powder
Proceedings, H. Weiland; A.D. Rollett; W.A. Cassada (eds.) International Conference on Aluminium Alloys (ICAA 13), 1017, (2012)

S. Scudino, J. Eckert
Nanocrystalline metals and alloys prepared by mechanical attrition
Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. S. H. Whang (ed.) Cambridge: Woodhead Publ., 2011, Chapter 3 , 3, 59-84, (2011)

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales
Mechanical engineering properties of CMAs
Complex Metallic Alloys : Fundamentals and Applications, Dubois, Jean-Marie (ed.), Weinheim : Wiley-VCH-Verl. , 273-316, (2011)

J. Eckert, S. Scudino, M. Stoica, S. Kenzari, M. Sales
Mechanical engineering properties of CMAs
Complex Metallic Alloys: Fundamentals and Applications, Dubois, Jean-Marie ; Belin-Ferre, Esther (Ed.), Weinheim: Wiley-VCH , 273-315, (2010)

M. Sakaliyska, S. Scudino, H.V. Nguyen, K.B. Surreddi, B. Bartusch, F. Ali, J.-S. Kim, J. Eckert
Consolidation and mechanical properties of mechanically alloyed Al-Mg powders
MRS Symposium Proceedings, M. Palm ; B.P. Bewlay ; M. Takeyama ; J.M.K. Wiezorek ; Y.-H. He (eds) Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, MRS Symposium , 1128, U05-46, (2009)

C. Duhamel, S. Venkataraman, S. Scudino, J. Eckert
Diffusionless transformations
Basics of Thermodynamics and Phase Transitions in Complex Intermetallics, Book Series on Complex Metallic Alloys, E. Bellin-Ferre (ed.), Singapur: World Scientific Publisher, 2008 , 1, 119-146, (2008)

J. Eckert, S. Scudino
Crystallization of metallic glasses
Materials Processing Handbook, J.R.Groza ; J.F. Schackelford ; E.J. Lavernia M.T. Powers (eds.)Taylor and Francis, 2007 , 6/1-27, (2007)

H. Breitzke, K. Lueders, S. Scudino, J. Eckert, U. Kuehn
Medium-range order and crystallization in Zr59Cu20Al10Ni8Ti3 and Zr57Cu20Al10Ni8Ti5 metallic glasses investigated by NMR
MRS Symposium Proceedings Amorphous and Nanocrystalline Metals, Symposium held , 806, 57-62, (2004)

S. Scudino, J. Eckert, U. Kuehn, H. Breitzke, K. Lueders, L. Schultz
Influence of Al on quasicrystal formation in Zr-Ti-Nb-Cu-Ni-Al metallic glasses
MRS Symposium Proceedings Amorphous and Nanocrystalline Metals, Symposium held , 806, 83-88, (2004)

Eingeladene Vorträge

K. Kosiba, S. Scudino, U. Kühn
Non-equilibrium phases and microstructures
BAM-IFW Workshop | Bundesanstalt für Materialforschung und -prüfung
Berlin, Germany, 25.11.2019 - 26.11.2019

K. Kosiba, S. Scudino, S. Pauly, L. Deng, U. Kühn
Bulk metallic glasses at the Leibniz IFW Dresden: synthesis, structure and properties
Workshop KITECH – IFW – KIMS | Korean Institute of Industrial Technology, Seoul, Incheon
Seoul, South Korea, 02.12.2019 - 03.12.2019

J. Krzuc, B. Li, S.H. Xie, H. Shakur Shahabi, S. Scudino, J. Eckert
Improving the fracture toughness of bulk metallic glasses by thermomechanical treatments
TMS 2017, The 146th Annual meeting and exhibition, San Diego/ USA, 26.2.-2.3.17

S. Scudino
Strain analysis of plastically-deformed bulk metallic glasses: challenges and opportunities
PETRA IV: Research with High Energy X-Rays at Ultra-Low Emittance Sources, DESY Hamburg/ Germany, 13.-15.2.17

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, J. Eckert
Crystallization behavior and soft magnetic properties of (Fe36Co36B19.2Si4.8Nb4)99.5Cu0.5 bulk metallic glass
TMS 2017, The 146th Annual meeting and exhibition, San Diego/ USA, 26.2.-2.3.17

J.J. Kruzic, B.S. Li, H. Shakur Shahabi, S. Scudino, J. Eckert
Designed Heterogeneities Improve the Fracture Reliability of a Zr-based Bulk Metallic Glass
TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16

M. Stoica, P. Ramasamy, I. Kaban, S. Scudino, J. Wright, J. Eckert
Influence of small Cu addition on the crystallization behavior of soft magnetic FeCoBSiNb bulk metallic glass
THERMEC’2016, International Conference on Processing & Manufacturing of Advanced Materiales: Processing, Fabrication, Properties, Applications, Graz/ Austria, 29.5.-3.6.16

S. Pauly, U. Kuehn, S. Scudino, T. Gustmann, C. Schricker, J. Sander, H. Schwab, J. Hufenbach, F. Silze
SLM für Spezialwerkstoffe
Werkstoffsymposium, Dresden/ Germany, 8.-9.12.16

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, D. Sopu, B. Sarac, D. Ehinger, D. Geißler, J. Eckert
Structural modifications of Fe-based BMGs induced by thermal cycling studied by mean of in-situ X-ray diffraction
23rd International Symposium on Metastable, Amorphous and Na, Nara/ Japan, 3.-8.7.16

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
FeCoSiBNbCu Bulk Metallic Glass with Compressive Deformability
TMS 2016, The 145th Annual meeting and exhibition, Nashville/ USA, 14.-18.2.16

S.A. Rounaghi, S. Scudino, H. Eshghi, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R. Kiani Rashid, M. Samadi Khoshkhoo, U. Scheler, J. Eckert
Mechanochemical Synthesis of Nanostructured Aluminum Nitride
Materials Science & Technology 2016 Conference, Salt Lake City/ USA, 23.-27.10.16

S. Pauly, K. Kosiba, S. Scudino, U. Kuehn, A.L. Greer
Designing microstructures of metallic glass matrix composites by flash-annealing
Workshop at Shandong University, Weihai/ China

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
(Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties
22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15

S. Scudino, H. Shakur Shahabi, M. Stoica, I. Kaban, G. Vaughan, U. Kuehn, J. Eckert
Strain Analysis of Plastically-deformed Bulk Metallic Glasses
22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), Paris/ France, 13.-17.7.15

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
(Fe36Co36B19.2Si4.8Nb4)100-xCux (x = 0 and 0.5) Bulk Amorphous Alloys, Structure Evolution and Soft Magnetic Properties
Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Munich/ Germany, 10.-11.7.15

J. Eckert, K.G. Prashanth, S. Scudino, M. Stoica, S. Pauly, U. Kuehn
Selective Laser Melting of Metallic Glasses
The Minerals, Metals and Materials Society Annual Meeting 2015 (TMS 2015), Orlando/ USA, 15.-19.3.15

M. Stoica, S. Scudino, I. Kaban, P. Ramasamy, M. Nicoara, J. Eckert
Structure evolution and soft magnetic properties of Cu-free and Cu-added Fe-Co-B-Si-Nb BMGs
Advanced Materials and Structures AMS'15, Timisoara/ Romania, 16.-17.10.15

S. Scudino
Effect of mechanical pretreatment on the mechanical behavior of bulk metallic glasses
2nd Industry-Network Meeting – VitriMetTech ITN, “Mechanical Properties of Vitrified Metals'', IFW Dresden, Dresden/ Germany, 14.-17.9.15

J. Eckert, S. Scudino, D. Beitelschmidt, H.S. Shahabi, U. Kuehn, M. Stoica
Ductilization of metallic glasses by mechanical treatment
TMS 2014, The 143rd Annual Meeting and Exhibition, San Diego, California/ USA, 3/2014

M. Stoica, S. Scudino, J. Bednarcik, I. Kaban, J. Eckert
Compressive behavior of {[(Fe0.5Co0.5)0.75Si0.05B0.20]0.96Nb0.04}99.5Cu0.5 glassy alloy
Global Research Laboratory Korea- Germany Workshop on Bulk Metallic Glasses and Nanostructured Materials, Jeong Seon/ Korea, 22.8.14

S. Scudino
Material efficient design for sustainable energy applications
Korean- German Workshop on Rare Metals, Incheon/ Korea, 8.5.12

S. Scudino, U. Kuehn, J. Eckert
Mechanical properties of complex metallic alloys
MRS Fall Meeting, Boston/ USA, 25.-30.11.12

S. Scudino
Powder metallurgy of high-strength Al-based alloys and composites
C-MAC Workshop Grenoble/ France, 21.-22.5.12

S. Scudino, H.S. Shahabi, M. Stoica, U. Kuehn, J. Eckert
Enhanced tensile ductility of bulk metallic glasses by customized microstructural heterogeneities
ISMANAM 2012, Konferenz, Moskau/ Russland, 16.-22.6.12

J. Eckert, M. Sakaliyska, K.B. Surreddi, S. Scudino
Complex metallic alloys
14th International Symposium on Metastable and Nano Materials, Korfu/ Griechenland, 28.8.07

N. Radtke, U. Kuehn, S. Scudino, J. Eckert, L. Schultz
Microstructure, thermal stability and mechanical properties of slowly cooled Zr-based composites
Seminar-Vortrag am FG Physikalische Metallkunde der TU Darmstadt, 10.11.04

S. Scudino
Quasicrystal formation in Zr-based glassy alloys
Seminarvortrag an der TU Darmstadt, FG Physikalische Metallkunde, 10.11.04

J. Eckert, U. Kuehn, S. Scudino, N. Mattern
Quasicrystals and related phases in multicomponent alloy systems
MRS Fall Meeting, Boston/USA, 1.-5.12.03

Monografiebeiträge

2017 - K.G. Prashanth, S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert, S. Brischetto, P. Maggiore, C.G. Ferro
Additive Manufacturing: Reproducibility of Metallic Parts, in: Additive Manufacturing Technologies and Applications
| S. 137-143 | URL