Zeitschriften

R.-M. Neubieser, L.G. Weckelmann, M. Michel, M. Unruh, D. Zanders, A. Kostka, A. Devi, A. Grabmaier
Gas Sensor for Ammonia and Nitrogen Oxides Made of ALD-Grown MoS₂
IEEE Sensors Letters 9, 2000904/1-4 (2025) URL

S. Göllner, M. Colditz, Y. Huang, H. Schmidt, A. Winkler, A.C. Stiel
Chip-Based Optoacoustic Single-Cell Detection in Flow Using Point-Source Optimized Surface Acoustic Wave Transducers
ACS Applied Materials & Interfaces 17, 14903-14911 (2025) URL

D. Mikhailova, S.M. Avdoshenko, M. Avdeev, M. Hanfland, U. Schwarz, Y. Prots, A. Sarapulova, K. Glazyrin, L. Dubrovinsky, A. Senyshyn, J. Engel, H. Ehrenberg, A.A. Tsirlin
Metallization without Charge Transfer in CuReO₄ Perrhenate under Pressure
Inorganic Chemistry 64, 6010-6022 (2025) URL

A. Scheer, G.J. Smales, H.B.T. Nguyen, J. Rattenberger, C. Mayrhofer, J. Fischer, S. Fischer, D. Mikhailova, S. Spirk
Influence of precursor structure on KOH-activated carbon: A study using tunable all-cellulose composites
Carbon 247, 121036/1-15 (2025) URL

F. Preischel, D. Zanders, J.-P. Glauber, K. Rönnby, D. Rogalla, T. Gemming, P. Dement, M. Nolan, A. Devi
Plasma-enhanced atomic layer deposition of AlPO₄/AlP_xO_y: comparing dual source and supercycle approaches for composition control
Dalton Transactions 54, 17507-17520 (2025) URL

J. Löfstrand, M. Tidefelt, M. Fisk, M. Kaplan, M. Sahlberg, X. Han, I. Kaban, P.E. Jönsson
Uncovering the initial nucleation process during rapid heating of Fe-Co-Nb-B metallic glasses
Materials & Design 259, 114799/1-11 (2025) URL

J. Liu, J.-P. Glauber, J. Lorenz, D. Rogalla, C. Harms, A. Devi, M. Nolan
Surface Oxidation of Transition Metal Nitrides
The Journal of Physical Chemistry C 129, 11173-11182 (2025) URL

A.V. Boehm, M.A. Bader, F. Kochta, C. Kunz, U. Kühn, K. Neufeld, L. Giebeler, J.K. Hufenbach
Low-alloyed steel with superior dry abrasive wear resistance and mechanical properties processed via steel mold casting
Wear 566-567, 205756/1-10 (2025) URL

F.-F. Cai, B. Sarac, A. Akman, J.J. Londoño, S. Gümrükcü, L. Schweiger, M. Hantusch, J. Schroers, A. Blatter, A. Gebert, F. Spieckermann, J. Eckert
Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation
Materials & Design 249, 113530/1-11 (2025) URL

M. Seifert, C. Linke, E. Franzke, H. Schmidt, T. Gemming
Oxide dispersion hardened Mo thin films for high-temperature electrode applications
Journal of Alloys and Compounds 1037, 181967/1-7 (2025) URL

A. Thomas, D. Pohl, A. Tahn, H. Schlörb, S. Schneider, D. Kriegner, S. Beckert, P. Vir, M. Winter, C. Felser, B. Rellinghaus
In‐Situ Monitoring the Magnetotransport Signature of Topological Transitions in a Chiral Magnet
Small Methods 9, 2401875/1-6 (2025) URL

J. Du, J. Zhang, X. Chu, H. Xu, Y. Zhao, M. Löffler, G. Wang, D. Li, Q. Guo, A. Morag, J. Du, J. Zou, D. Mikhailova, V. Mazánek, Z. Sofer, X. Feng, M. Yu
Six-electron-conversion selenium cathodes stabilized by dead-selenium revitalizer for aqueous zinc batteries
Nature Communications 16, 3707/1-10 (2025) URL

M. Otto, T. Hultsch, V. Shtefan, V. Hoffmann, S.V. Lamaka, T. Gemming, A. Gebert, J. Fröhlich, M. Zheludkevich, J. Hufenbach
Mechanisms of laminar flow controlled in vitro corrosion of a biodegradable Fe-Mn-C steel
Corrosion Science 249, 112860/1-17 (2025) URL

D. Chernyavsky, D.Y. Kononenko, J. Hufenbach, J. van den Brink, K. Kosiba
Bayesian optimization for laser powder bed fusion of defect-free AA2024
Additive Manufacturing 114, 105022/1-16 (2025) URL

S. Liu, V. Kaban, O. Gutowski, T. Volkmann, K. Nielsch, I. Kaban
Revealing solidification behaviour and phase transformations in Fe₆₀Co₂₅Ni₁₀Mo₅ and Fe₆₃Co₂₆Ni₁₁ alloys by using high-speed video and in situ X-ray diffraction
Acta Materialia 292, 121017/1-14 (2025) URL

A.V. Boehm, S. Pilz, R. Wonneberger, S. Martin, J. Sander, L. Giebeler, K. Kosiba, A. Undisz, A. Leineweber, J.K. Hufenbach
Lean tool steel processed via laser powder bed fusion: in situ observation of transformation induced plasticity
Materials Science and Engineering: A 944, 148906/1-11 (2025) URL

D. Cheng, H.L. Ong, S. Wohlrab, A. Winkler, P. Canyelles-Pericas, C. Zhang, J. Zhang, R. Ding, Y. Jiang, K. Thummavichai, Q. Wu, J. Luo, Y.-Q. Fu
Integration of sensing/acoustofluidic functions and modulation of surface acoustic wave fields on printed circuit board
Surface and Coatings Technology 511, 132284/1-9 (2025) URL

L.F. Pfeiffer, M. Dillenz, N. Burgard, P. Beran, D. Roscher, M. Zarrabeitia, P. Drews, C. Hervoches, D. Mikhailova, A. Omar, V. Baran, N. Paul, M. Sotoudeh, M. Busch, M. Wohlfahrt-Mehrens, A. Groß, S. Passerini, P. Axmann
From structure to electrochemistry: the influence of transition metal ordering on Na⁺/vacancy orderings in P2-type Na_xMO₂ cathode materials for sodium-ion batteries
Journal of Materials Chemistry A 13, 540-560 (2025) URL

L. Heinze, T. Kotte, R. Rausch, A. Demuer, S. Luther, R. Feyerherm, E.L.Q.N. Ammerlaan, U. Zeitler, D.I. Gorbunov, M. Uhlarz, K.C. Rule, A.U.B. Wolter, H. Kühne, J. Wosnitza, C. Karrasch, S. Süllow
Atacamite Cu₂Cl(OH)₃ in High Magnetic Fields: Quantum Criticality and Dimensional Reduction of a Sawtooth-Chain Compound
Physical Review Letters 134, 216701/1-6 (2025) URL

P. Ranjan, P. Raizada, P. Singh, A. Devi, B. Saha, A. Singh
Functional Nanomaterials Based Electrochemical and Chemiresistive Sensors for Hydrogen Detection: A Review
Chemistry – An Asian Journal 20, e00712/1-20 (2025) URL

Z. Dou, H. Rox, Z. Ramos, R. Baumann, R. Ravishankar, P. Czurratis, X. Yang, A.F. Lasagni, K. Eckert, J. Czarske, D. Weik
Scanning acoustic microscopy for quantifying bubble evolution in alkaline water electrolyzers
Journal of Power Sources 660, 238575/1-14 (2025) URL

K. Gabrysiak, A.V. Boehm, T. Gustmann, C. Leyens, U. Kühn
Elevated-temperature strength and wear behavior of Al80Mn11Ce9 processed by laser powder bed fusion
Journal of Materials Research and Technology 37, 2327-2337 (2025) URL

S. Beckert, R. Schlitz, G. Skobjin, A. Badura, M. Leiviskä, D. Kriegner, D. Scheffler, G. Sala, N. Nabben, X.-Y. Ai, K. Olejník, L. Michez, V. Baltz, A. Thomas, H. Reichlová, S.T.B. Goennenwein
Detecting slow magnetization relaxation via magnetotransport measurements based on the current-reversal method
Physical Review B 111, 014441/1-10 (2025) URL

L.A. Alberta, P.M. Giraldo-Osorno, A. Hariharan, J. Vishnu, S. Pilz, A. Voß, A. Palmquist, M. Trobos, A. Gebert, M. Calin
Effect of aging treatments on mechanical, chemical, and antibacterial properties of a β-type Ti–Nb–Cu alloy for implant applications
Journal of Materials Research and Technology 36, 1049-1063 (2025) URL

M. Seifert, M. Hantusch, T. Gemming
High-temperature stability of Ca₃TaGa₃Si₂O₁₄ in various atmospheres up to 1000 °C
Surfaces and Interfaces 66, 106494/1-13 (2025) URL

J.L. Vazquez-Arce, A. Amoroso, N. Perez, J. Charvot, D. Naglav‐Hansen, P. Zhao, J. Yang, S. Lehmann, A. Wrzesinska-Lashkova, F. Pieck, R. Tonner‐Zech, F. Bureš, A. Acquesta, Y. Vaynzof, A. Devi, K. Nielsch, A. Bahrami
Low Temperature Atomic Layer Deposition of (00l)‐Oriented Elemental Bismuth
Angewandte Chemie International Edition 64, e202422578/1-13 (2025) URL

Y. Liu, L. Wang, C. Liu, J. Kresse, M. Deconinck, R. Hübner, D. Mikhailova, Y. Vaynzof, X. Zhang, A. Eychmüller
Electro-Bendable Metal–Organic Framework Nanosheets Enable Durable Electrocatalytic Water Oxidation at 1 A/cm²
ACS Catalysis 15, 9353-9363 (2025) URL

K. Kosiba, W. King, J. Han, B. Paul, D.Y. Kononenko, M. Otto, D. Chernyavsky, J. van den Brink, S. Scudino, J. Hufenbach
Fabrication of filigree parts via laser powder bed fusion: From melt spots to stents
Optics & Laser Technology 180, 111485/1-11 (2025) URL

X. Ai, Y. Wu, H. Lyu, L. Giebeler, W. Xue, A. Sotnikov, Y. Wang, Q. Zhang, D. Makarov, Y. Yu, G.J. Snyder, K. Nielsch, R. He
High-performance ZrNiSn-based half-Heusler thermoelectrics with hierarchical architectures enabled by reactive sintering
Nature Communications 16, 6497/1-9 (2025) URL

N. Fernandez Navas, U. Hempel, V. Shtefan, A. Voss, P. Goldberg, M. Zawischa, M. Zimmermann, A. Gebert
Improved biocompatibility of Ti-based bulk metallic glasses by electrochemical formation of nanoporous oxide layers
Biomaterials Advances 177, 214378/1-14 (2025) URL

H.B.T. Nguyen, L. Ding, B. Pohle, T. Schmeida, H.B.A. Nguyen, D. Mikhailova
Ternary PEO/PVDF-HFP-Based Polymer Electrolytes for Li-Ion Batteries
Batteries 11, 45/1-21 (2025) URL

K. Sun, X.D. Yuan, N.Z. Zhang, Y.F. Jia, J.C. Tseng, K. Kosiba, Y.D. Jia, C. Shuai, S. Pauly, G. Wang
Non-monotonic fluctuation of structural heterogeneity in metallic glass due to cyclic rapid heat treatment
Applied Physics Letters 126, 021901/1-9 (2025) URL

A. Ghazy, D. Zanders, A. Devi, M. Karppinen
Atomic and Molecular Layer Deposition of Functional Thin Films Based on Rare Earth Elements
Advanced Materials Interfaces 12, 2400274/1-30 (2025) URL

P. Grimm, L. Giebeler, J. Hufenbach
Harnessing centrifugal casting for designing aluminum alloys adapted to laser powder bed fusion
Journal of Materials Research and Technology 1-36 (2025) URL

A. Jose, E. Dmitrieva, S. Schiemenz, H. Schlörb, T. Gemming, D. Wolf, A. Devi, A. Gebert
Nanoporous gold nanostructures via overpotential electrodeposition and two-step dealloying for SERS applications
Journal of Alloys and Compounds 1046, 184881/1-14 (2025) URL

F. Günther, S. Pilz, L. Stampa, J. Bretschneider, M. Wagner, A. Gebert, M. Zimmermann
Defect-dependent fatigue properties of β Ti-42Nb processed by laser powder bed fusion
Materials Today Communications 43, 111733/1-17 (2025) URL

V. Shtefan, N. Fernandez Navas, I. Kaban, M. Hantusch, A. Gebert
Pitting corrosion mechanisms of Ti-Cu-(Pd-) based metallic glasses in simulated physiological solution
Corrosion Science 251, 112913/1-16 (2025) URL

M.V. Gorbunov, D. Mikhailova
Peculiarities in Structural Behaviour of Graphite During Anionic Intercalation of PF₆-, FSI- and ClO₄- at Elevated Temperature
Chemical Communications 61, 5451-5454 (2025) URL

R. Doineau, C.N. Saggau, S. Baunack, T. Gemming,Abdelaal. Y., R. Weser, O.G. Schmidt, H. Schmidt, A. Winkler, M. Medina Sanchez
Self‐Assembled Inorganic Nanomembrane Tubes: Rolled‐Up Piezoelectrics for Microacoustic Wave‐Based Actuators and Sensors
Advanced Materials e12619/1-12 (2025) URL

T. Wejrzanowski, S. Jacob, A. Winkler, J. Delmoral, A. Borrás, A.R. González-Elipe
Atomic-Scale Modeling of Water and Ice Behavior on Vibrating Surfaces: Toward the Design of Surface Acoustic Wave Anti-icing and Deicing Systems
Langmuir 41, 11293-11306 (2025) URL

B. Wang, C. Pan, Z. Jin, H. Zhu, C. Lu, J. Hufenbach, X. Li, K. Kosiba
Enhancing the strength-ductility synergy in CoCrNi medium-entropy alloys via grain boundary segregation engineering
Virtual and Physical Prototyping 20, e2515238/1-17 (2025) URL

S. Pandey, J. del Moral, S. Jacob, L. Montes, J. Gil‐Rostra, A. Frechilla, A. Karimzadeh, V.J. Rico, R. Kanter, N. Kandelin, C. López‐Santos, H. Koivuluoto, L. Angurel, A. Winkler, A. Borrás, A. González‐Elipe
Mechanisms of De‐icing by Surface Rayleigh and Plate Lamb Acoustic Waves
Advanced Engineering Materials 27, 2401820/1-16 (2025) URL

H. Zhou, P. Galek, T. Zheng, P. Li, X. Zhou, C. Liu, J. Kunigkeit, K. Haase, Y. Li, J. Qu, A. Bahrawy, P. Xiong, J. Grothe, D. Mikhailova, S.C.B. Mannsfeld, E. Brunner, S. Kaskel
Redox-active electrolyte-based printed ionologic devices
Nature Communications 16, 4725/1-10 (2025) URL

B. Denkena, J. Hufenbach, B. Bergmann, U. Kühn, V. Kaban, J. Schenzel, S. Worpenberg, C. Kunz
Impact of microstructure and heat treatment on chip formation of Ti-5553 processed by laser powder bed fusion
Production Engineering 1-13 (2025) URL

B. Paul, A. Bahrami, V. Hahn, A. Quade, A. Datye, K. Kosiba, S. Pilz, P. Goldberg, U.D. Schwarz, F. Hempel, J. Hufenbach, K. Nielsch
Atomic Layer Deposition of ZnO Coating on Biodegradable Fe‐Based Alloys
Advanced Materials Interfaces 12, 2400895/1-12 (2025) URL

S. Oswald, M. Hantusch, M.V. Gorbunov, T. Schmeida, A. Thomas, D. Mikhailova
Electron Spectroscopic Investigations of Alkaline‐Based Battery‐Relevant Reference Materials
Surface and Interface Analysis 57, 439-444 (2025) URL

F. Preischel, K. Rönnby, L. Mai, D. Zanders, D. Rogalla, B. Mallick, M. Nolan, A. Devi
Near Room-Temperature Atomic Layer Deposition of Magnesium Oxide Using Bis-3-(N,N-dimethylamino)propyl Magnesium(II) and Water
Journal of the American Chemical Society 147, 31764-31778 (2025) URL

F. Sgarbi Stabellini, A. Singh, I. Soldatov, R. Schäfer, M. Huang, G. Mutschke, V. Neu, A. Gebert, K. Leistner
Downscaling magnetic field gradients for structured copper magnetoelectrodeposition on the micrometer scale
Electrochimica Acta 525, 145994/1-11 (2025) URL

A. Omar, F. Börrnert, M. Richter, J. Trinckauf, F. Heinsch, C.G.F. Blum, V. Romaka, S. Rodan, F. Steckel, M. Haft, S. Hampel, S. Beckert, A. Thomas, C. Hess, A.U.B. Wolter, W. Löser, B. Büchner, S. Wurmehl
Material design toward a thermodynamically stable Co–Cr–Fe–Al Heusler-type phase
APL Materials 13, 051118/1-17 (2025) URL

W. Feng, J. Schultz, D. Wolf, S. Pylypenko, T. Gemming, K. Weinel, L. Agudo Jacome, B. Büchner, A. Lubk
Secondary electron emission from gold microparticles in the transmission electron microscope: comparison of Monte Carlo simulations with experimental results
Journal of Physics D: Applied Physics 58, 085102/1-12 (2025) URL

A. Thomas, B. Pohle, M. Schmidt, H.-G. Bischoff, M. Lau, F. Heubner, S. Kaskel, D. Mikhailova
Impact of NaH on the Electrochemical Performance of Sodium Batteries
ACS Omega 10, 2699-2711 (2025) URL

F. Senftleben, M. Calin, J. Eckert, M. Bönisch
Laser powder bed fusion vs. single track laser melting of martensitic Ti-Nb: Phase and microstructure formation
Additive Manufacturing 109, 104884/1-17 (2025) URL

K. Tiwari, A. Blanquer, D.Z. Pérez, C. Pavan, M. Tomatis, N. Fernandez Navas, F. Scaglione, B.J. Rodriguez, A. Gebert, F. Turci, T. Ó Cróinín, C. Nogués, P. Rizzi
Cytocompatible and antibacterial efficacy of surface designed Ti₄₀Cu₄₀Zr₁₁Fe₃Sn₃Ag₃ amorphous alloy for potential biomedical applications
Journal of Alloys and Compounds 1014, 178584/1-12 (2025) URL

G. Bartholazzi, T. Jussila, J. Obenlüneschloß, V. Vähänissi, A. Devi, H. Savin, M. Karppinen, D.H. Macdonald, L.E. Black
Atomic-layer-deposited CuxCryOz thin films: Optoelectronic properties and potential application as hole-selective contacts for c-Si solar cells
Applied Surface Science 683, 161793/1-10 (2025) URL

Beiträge in Konferenzberichten/Tagungsbänden

M. Roudini, Bhumika Patel, A. Winkler
Miniaturized, cost-efficient, mass-producible and reproducible SAW-based aerosol generators
Collection of accepted and confirmed abstracts Acoustofluidics 2025, (2025), URL

Jaime del Moral, Miguel González del Val, Luke Haworth, Victor Rico, Juan R. Sánchez-Valencia, Julio Mora, Carmen Lopez-Santos, K. Khodakarami, A. Winkler, Richard Fu, Ana Borrás, Agustin R. González-Elipe, Stefan Jacob
Acoustic waves for robust and reliable monitoring of icing processes
Collection of accepted and confirmed abstracts Acoustofluidics 2025, (2025), URL

Z. Jin, K. Kosiba, J. Hufenbach
A novel medium-carbon steel for laser powder bed fusion: microstructure, mechanical and wear properties 
Alloy for Additive Manufacturing Symposium (AAMS 2025), (2025), URL

A. Zarama Acero, M. Hasani, A. Winkler, D. Collins, A. Fakhfouri
Acoustic field localization by microresonators for capture and release of nanoparticles in fully-microfabricated surface acoustic wave (SAW) tweezers
Collection of accepted and confirmed abstracts Acoustofluidics 2025, 27, (2025), URL

K. Khodakarami, Agustin R. González-Elipe, Carmen López Santos, Jaime del Moral, Laura Montes, Ana Borras, Juan E Sánchez Valencia, Julio Mora Nogues, Paloma Garcia Gallego, Rafal Kozera, Bartlomiej Przybyszewsk, A. Winkler
Method for analysis of hydro-/iceophobic coating performance in Surface Acoustic Wave (SAW) de- and anti-icing
Collection of accepted and confirmed abstracts Acoustofluidics 2025, 47, (2025), URL

R. Doineau, C. Saggau, H. Schmidt, A. Winkler, M. Medina Sanchez
From 2D to 3D Piezoelectrics: Nanomembrane self-assembly for acoustic wave resonators
Collection of accepted and confirmed abstracts Acoustofluidics 2025, (2025), URL

S. Hartmann, M. Roudini, Y. Alsaadawi, I. Frozanpoor, B. Geramian, U. Weißker, P. Günther, E. Zschetzsche, A. Winkler
Surface-acoustic-wave (SAW) based aerosol sources for next-generation 3D microprinting
2nd Microprinting Workshop – Emerging Trends in Microprinting: Materials, Methods and Applications, (2025), URL

Y. Alsaadawi, M. Roudini, B. Geramian, S. Mohammad, A. Winkler
Direct printing of biomaterials (bioprinting) using microacoustic aerosol jet technology
Collection of accepted and confirmed abstracts Acoustofluidics 2025, (2025), URL

E. Markwardt, S. Göllner, M. Colditz, Y. Huang, H. Schmidt, A. Winkler, A.C. Stiel
Chip-based optoacoustic single cell detection in flow using point-sourceoptimized SAW transducers
Collection of accepted and confirmed abstracts Acoustofluidics 2025, 4, (2025), URL

R. Bruenig, U. Weißker, A. Winkler
High-speed interrupt free tracking of resonance frequency for acoustofluidic SAW-actuators
Acoustofluidics 2025, (2025), URL

Eingeladene Vorträge

A. Winkler
Surface Acoustic Waves for Biotechnology and Medical Applications
UltrasounDD Conference – Dresden | EKFZ
Dresden, Germany, 26.09.2025

A. Gebert
Additive manufacturing & advanced surface design of metastable Ti alloys for biomedical use
Instituts-Kolloquium, Faculty of Engineering and Applied Sciences | Cranfield University
Cranfield, UK, 15.05.2025

A. Gebert
Surface designs to improve the biocompatibility of Ti-based bulk metallic glasses 
Thermec 2025 Conference | Faculty of Science and Technology of University of Tours
Tours, France, 02.07.2025

V. Shtefan, N. Fernandez Navas, A. Gebert
Electrochemical behavior as an indicator of functional perfomance control in bulk metallic glasses
International Young Scientists Conference on Materials Science and Surface Engineering | Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
Lviv, Ukraine, 25.09.2025

M. Roudini, Y. Alsaadawi, A. Winkler
Surface Acoustic Wave-Induced Aerosol Printing for Nanomaterial Deposition
NanoNet+ Workshop _ 2D Materials for Electronics, Photonics and Sensing | Helmholtz-Zentrum Dresden-Rossendorf e. V.
Dresden, Germany, 10.09.2025 - 12.09.2025

A. Gebert
Korrosionsanalyse von neuen Titanlegierungen für Implantatanwendungen
43. Tagung Werkstoffprüfung 2025 der DGM, Dresden | Deutsches Hygiene-Museum Dresden
Dresden, Germany, 27.11.2025 - 28.11.2025

I. Kaban
Structural studies of rapid phase transformations in crystalline and amorphous metals
Seminar of the Sustainable Manufacturing Systems Centre | Faculty of Engineering and Applied Sciences, Cranfield University
Cranfield, UK, 16.05.2025

J. Hufenbach
Design of novel high-carbon steels for additive manufacturing
Scientific colloquium of the Collaborative Research Centre / Transregio (TRR) 375 | Collaborative Research Centre / Transregio (TRR) 375
Kaiserslautern, Germany, 04.06.2025